Last Modified: Jun 15, 2016 degruchy's Ecologic Mortar... Just add water!

Similar documents
Further Explanations and Information on Lime Mortar Products. Information Source...LIME WORKS.US

Support where necessary with wires, anchorage, stainless steel fixings or forms, etc.

Magna Wall. Scratch and Brown with Fiber. Product Overview, Instructions, & Data. Durable

MANUFACTURER S SPECIFICATIONS Section ST. ASTIER LIME PLASTER (NHL) PLASTER ON HEMPCRETE

MANUFACTURER S SPECIFICATIONS Section ST. ASTIER LIME PLASTER (NHL) MASONRY [BLOCKS] [BRICKS] [STONE]

MANUFACTURER'S SPECIFICATIONS Section ST. ASTIER LIME PLASTER (NHL) PLASTER ON CONCRETE

Magna Wall. Mortar Cement Type N. Product Overview, Instructions, & Data. Durable A HEADWATERS COMPANY

Magna Wall. Mortar Cement Type S. Product Overview, Instructions, & Data. Durable

Paragraph Description Page No General Materials Concrete Masonry Work Altitude Valve Vault Cover 25-4

Hemp Mortars St Astier Limes and Mortars telephone:

Magna Wall. PA Mortar Mix. (Add Sand, Water and Portland) Product Overview, Instructions, & Data. Durable

Conditions of the Contract and Division 1 General Requirements are a part of this section.

RENEW ELASTOMERIC ACRYLIC COATING (PAINT GRADE) MANUFACTURERS SPECIFICATION / SECTION

Last Modified: Oct 9, Product Mixing & Installation Guide. Page 1 of 10

Magna Wall. Mason s Portland Cement 1P. Product Overview, Instructions, & Data. Durable A HEADWATERS COMPANY MASONRY

The Heritage Range.

Polymer bonding aid and mortar additive bonding agent for old and new concrete. Test method Typical result Control. Compressive strength (BS6319,Pt2)

DIVISION 3 CONCRETE Section Concrete Rehabilitation

EPIC F312. Uniclass. CI/SfB April Yq4. Natural Hydraulic Lime Mortar

MONOBASE AAC/ SIDER-PLAST THE ULTIMATE EXTERIOR HARD COAT STUCCO SYSTEM FOR AUTOCLAVED AERATED CONCRETE

PILL AR OF THE INDUSTRY

Natural Hydraulic Limes (NHL)

DIVISION 3 - CONCRETE Section Concrete Toppings Section Concrete Resurfacing Section Concrete Rehabilitation

Hydraulic Lime Mortars For Wall Building & Re-pointing IMPORTANT NOTICE

ARDEX GUIDE SPECIFICATION ARDEX TRM Transportation Repair Mortar Fast-Setting Concrete Repair Mortar

Part 1 - General. Spec Component Sikadur 32 Hi-Mod. DIVISION 3 -CONCRETE Section Cast-in-Place Concrete Bonding Agents for Concrete

POLYMER-MODIFIED TILE ADHESIVES AND GROUTS FOR MODERN CONSTRUCTION. Edition 1.0

DIVISION 3 - CONCRETE Section Concrete Rehabilitation

Effective Mortar Specifications. Jamie Farny PCA Market Manager Buildings June 24, 2015

MANUFACTURER S (SHORT FORM) SPECIFICATION / SECTION

MANUFACTURERS (SHORT FORM) SPECIFICATION / SECTION

SIDER-BASE CONCENTRATE AAC/ MONOSIDERAL AAC THE ULTIMATE OLD-WORLD AERATED CONCRETE-AAC DECORATIVE STUCCO SYSTEM

SECTION MASONRY GROUTING

Planitop Range. Smooth any surface PRODUCTS FOR BUILDING ADHESIVES SEALANTS CHEMICAL PRODUCTS FOR BUILDING

St. Astier NHL Plasters

Lime Cement Aggregates Mortar

DIVISION 3 - CONCRETE Section Concrete Toppings Concrete Resurfacing Concrete Rehabilitation

Setting holding down bolts Floor screeds Bedding blocks Stone and bricks In contact with potable water Fine moulding.

SECTION Arisfor WallGuard

3910 E. McKinney Denton, TX P.O. Box Dallas, TX EZ WALL CONCENTRATE, INC

Planitop Range Smooth

INTEGRALLY COLORED CONCRETE [DECORATIVE CONCRETE PAVING]

A. Section includes historic treatment work consisting of rep ointing brick masonry as follows:

SCG SELF CONSOLIDATING GROUT. Structurally Sound. Highly Fluid. MORTAR MASONRY PRODUCTS FINE (SC-02) COARSE (SC-03)

TACAMP 2014 CONCRETE. Presented by Rick Wheeler

PRODUCT DRYMIX CODEMIX

Water resistant bonding agent and mortar additive

Division 3 - Concrete Section Concrete Rehabilitation

Multipurpose latex additive for mortar and cementitious adhesive

FIBER BASE COAT PREBLENDED STUCCO. Excellent Workability. Superior Production. STUCCO MASONRY PRODUCTS (SU-05)

FIBER BASE COAT PREBLENDED STUCCO. Excellent Workability. Superior Production. Materials used

Waterproofing and Damp-proofing Cementitious Slurry

Pennoni Associates, Inc.

ARDEX GUIDE SPECIFICATION ARDEX FDM Full Depth Repair Mortar Concrete Repair Mortar with Corrosion Inhibitor

EVERLAST CONCRETE TECHNOLOGIES PROTECTION PRODUCTS SECTION CONCRETE ADDITIVES AND ADMIXTURES

ARDEX GUIDE SPECIFICATION ARDEX PANDOMO Wall ARDEX PANDOMO W1 Decorative Wall Finishing Compound

DIVISION 3 - CONCRETE Section Concrete Rehabilitation

MANUFACTURER S SPECIFICATIONS Section LIMESTONE PLASTER

Design Guide for the use of Hydraulic Lime Mortar. EcoRight Ltd Unit 2 Paddock Road Caversham Reading Berkshire RG4 5BY Tel:

Silica Fume in Concrete

POWERBASE ICF / SIDER PROOF FF-PR

1.02 SUMMARY A. Section Includes: 1. Repair of two-coat historic exterior vertical plasterwork (stucco)

8/29/2017. Maintaining, Renovating, Restoring, and Preserving Historical Properties. Feel free to ask or share during the presentation

GENERAL GUIDANCE FOR CARRYING OUT THE WORKS. Recommended specifications and working methods:

SCG SELF CONSOLIDATING GROUT. Structurally Sound. Highly Fluid. MORTAR MASONRY PRODUCTS FINE (SC-02) COARSE (SC-03)

Good Construction Practices Part II

Integrally Colored Concrete Best Practices Rich Cofoid Sr. Marketing and Product Line Manager

Comparative Study on the Strength and Durability Properties of M 50 Grade Self Compacting Concrete with Micro Concrete

DIATHONITE EVOLUTION Eco-friendly thermal, acoustic and dehumidifying plaster

PERM-FLEX ASSEMBLY DIRECT APPLICATION TO CEMENTITIOUS SUBSTRATES MANUFACTURERS SPECIFICATION / SECTION 09960

Maintenance of Unit Masonry

R3 Cementitious Pore Sealer and Levelling Mortar

EUROPLAST. Color 20 standard colors, see color chart for specifics. Special colors available upon request, virtually no limit to selection of shades.

Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement 1

SECTION CONCRETE AND MASONRY COATINGS

1. Repairing brick masonry, including replacing damaged units as indicated on drawings. 2. Repointing mortar joints.

MARMOCRYL SILICONE Fine

CHAPTER 3 SCOPE AND OBJECTIVES OF THE PRESENT INVESTIGATION

SECTION MORTAR

Investigation and Comparative Study of Effect of Silica Fume in Cementitious Grouts

ASH GROVE KOLORSTONE BROOMCOAT MIXING KIT. Spec Sheets Contents: Kolorstone Broomcoat Mixing Spec Sheet Kolorflex Admixture Spec Sheet

1 Exam Prep Concrete Masonry Handbook Questions and Answers

MANUFACTURER S SPECIFICATIONS SECTION EXTERIOR-INTERIOR LIME PLASTER

Division 3 - Concrete Section Concrete Rehabilitation

Comparison of Properties of Fresh and Hardened Concrete Containing Finely Ground Glass Powder, Fly Ash, or Silica Fume

SECTION PORTLAND CEMENT PLASTER (STUCCO) WITH ACRYLIC FINISH

DIVISION 9 - FINISHES Section Protective Coatings

REINFORCED CONCRETE MASONRY SECTION

RUREDIL X MESH C10. Ruredil PCT CLASS. Composite strengthening system for repairing and strengthening of masonry constructions.

DIATHONITE EVOLUTION Eco-friendly thermal, acoustic and dehumidifying plaster

SMET NHL 2 Feebly Hydraulic Lime Binder

Building Construction 14. Dr Nabil El-Sawalhi Associate professor Engineering Projects Management

Masonry Restoration Guidelines

Construction. Cementitious self levelling, fast hardening, underlayment for use 2-10mm, and 10-30mm with added aggregate. Product Description


ARDEX A 38TM Rapid Set Screed

ITEM 252 IN-PLACE FULL DEPTH COLD FLEXIBLE PAVEMENT RECYCLING

RITIVEX R LIQUID 1102

RITIVEX R LIQUID 1102

MANUFACTURER'S SPECIFICATIONS Section MASONRY REPOINTING AND RECONSTRUCTION

Transcription:

Last Modified: Jun 15, 216 degruchy's Ecologic Mortar... Just add water! degruchy's Ecologic Mortar, in any of the stock colors, are simply a prepared blend of binder/aggregate/pigments to which you just add water, mix and go to work. Use it to repoint historic buildings, stucco and build new buildings which are considered a Green Application and result in a desired "Old World" Lime finish. It is as simple as mixing the mortar with water using a high torque industrial electric drill and a rigid paddle attachment in five-gallon pail or using a mason's paddle-style mortar mixer. The bag weight is 38.5 pounds. degruchy's Ecologic Mortar is coded as "DGM" followed by a number to correspond to a certain stock mortar color. "SCG" on bags means "Standard Construction Grade" where no pigment is added. Type "F" stands for "fine sands" for the application of butter joint repointing, fine jointed Ashlar stonework and for smooth stuccos. Type "G" stands for "coarse granules" for most all other applications. The granules in Type G are coarse in comparison to the fine sands in a Type F mortar, but the coarse granules are likened to regular mason's sand that meets ASTM C-144 standards for sharp, well-graded sand. The coarse grains are not as coarse as typical concrete sand. Both the Type F and Type G sands have four grades of sand making up the majority of the component sizes in the entire sand blend. All Stock Ecologic Mortars are made with NHL 3.5 and G type sand blend. Ecologic Mortar (F) with fine sand is also made with NHL 3.5 and is a stock product in the SCG Non-Pigmented color only. All other mixes are considered a custom blend. The advantage of the pre-blended material with sand and pigment already added is that the mixing can take place on each level of scaffold, if suitable conditions allow using the drill and paddle mixing method, with no excess sand piles or other bags of material stored on site. degruchy's Ecologic pre-blended mortar is all you need. Having all the materials in one bag reduces the temptation for masons to add Portland cement to the straight Natural Hydraulic Limes thinking this is what is customary when they use local type S hydrated lime. The preblended material ensures that the engineering of the mortar s final properties is kept in a high quality control environment with the right sand and the right pigments for consistent color. Page 1 of 5

Ecologic Lime Mortar And Color-Matching System NO Portland Cement is present degruchy s Ecologic mortars yet the stock material will still reach the required 75 p.s.i. required for a type N mortar while maintaining the high permeability required for repointing and repair to historic structures originally built with lime mortars. Ecologic Mortars can be used for sustainable applications in stucco, interior plaster, laying up of masonry units, stonework and as historic building repointing mortars. The colors shown below represent the 12 stock Ecologic Mortar colors. Disclaimer: Many factors affect how these images may appear on your computer monitor and how it prints on your specific printer. Print this page to provide a similar representation of the actual shades of all stock Ecologic Mortars. It is suggested that you purchase the Ecologic Mortar kit so that you may view each strip individually or hold one or more of these channels of dried mortar up to a building to determine a match when planning to duplicate a repointing mortar. Page 2 of 5

Ecologic Lime Mortar And Color-Matching System NO Portland Cement is present degruchy s Ecologic mortars yet the stock material will still reach the required 75 p.s.i. required for a type N mortar while maintaining the high permeability required for repointing and repair to historic structures originally built with lime mortars. Ecologic Mortars can be used for sustainable applications in stucco, interior plaster, laying up of masonry units, stonework and as historic building repointing mortars. 4 Examples of custom mixes are included in the Ecologic Mortar Kit: Disclaimer: Many factors affect how these images may appear on your computer monitor and how it prints on your specific printer. Print this page to provide a similar representation of the actual shades of all stock Ecologic Mortars. It is suggested that you purchase the Ecologic Mortar kit so that you may view each strip individually or hold one or more of these channels of dried mortar up to a building to determine a match when planning to duplicate a repointing mortar. Page 3 of 5

Ecologic Mortar Type F NHL 3.5 Ready Mix Ecologic mortar F is a premixed pure & natural hydraulic lime and sand mortar for building, pointing, repointing, stucco work, plastering, and finishing in a variety of colors. The absence of cement, ashes, gypsum, and other pozzolanic additions together with its other qualities make Ecologic mortar F highly suitable for repair and conservation work on traditional, vernacular, and historic buildings. In new build the properties of Ecologic mortar F will allow the reduction of strategically placed control joints in new building, dispersion of condensation, and will accommodate small settlement movements. Ecofriendly Characteristics: High vapor exchange qualities Produced with lower energy than cementitious mixes Re-absorption of CO2 in curing Will not deteriorate timber Possibility of recycling the materials used in buildings Elimination of painted finishes Granulometry: F granulometry using US Standard Test Sieve #5 (.3mm) to #2 (.75mm) for masonry, pointing, dubbing out, first and main coats on renders and rough finishing coats. Packing: Ecologic mortar F 38.5lbs (17.5kg) Consumption: (See Ecologic mortar Consumption Chart) Preperation: In ordinary drum mixers (mix for about 5 minutes) Water Addition: Ecologic mortar F:.6 gallons (2.25 liters).65 gallons (2.5 liters) per bag of 38.5lbs. (17.5kg) Application: On clean and dry background not water proofed. Dampen adequately dry or high suction surfaces. Do not apply at temperatures below 4ºF (5ºC) or above 85ºF (3ºC). Protect against strong rain, frost, drying wind or direct strong sun until sufficient hardening has occurred Application by Spray Gun: Possible. Please consult us. The above details are given for information purposes only. Final dosages and application should be checked with our technicians. The Factory reserves the right to alter specifications. Page 4 of 5

Comparison Blends NHL vs. Cement Ecologic NHL 1:2.5 Type N Cement 1:1:6 Type O Cement 1:2:9 7.76 oz 2 g 2 g 1.7.72.65 INCH 23/64 9/32 9/32 H 6 1.3 1 lb/cu.ft. 134 131 131 % 9 162 15595 1355 221 193 1362 221 197 13785 2215 1965 7 days 83 297 239 69.6 283 225 246.5 34 217 297.25 319 246 29 319 254 7 days 83 728 719 213 1116 834 774 1174 834 855 1261 877 87 1232 863 Permeability vapor exchange. gr of air x m2 x hour x mmhg.85.23.25 Water content Water to binder ratio Penetration Set (beginning) Bulk density (no curing) Air content Elasticity Moduli Flexual strength Compressive strength Mpa PSI PSI Shrinkage at mm.m.44.63.42 Water absorbtion L.h.m2 7.3.23.25 g.min 4.7 1.8 6.86 Capillarity The above details are given for information purposes only. Final dosages and application should be checked with our technicians. The Factory reserves the right to alter specifications. Page 5 of 5