Your Fakro Dealer: PRODUCT CATALOG 0
INNOVATIVE SOLUTIONS The FAKRO Company concentrates its efforts around innovations. A direct effect of this work is entirely new products such as high pivot windows or Duet high pivot windows. Another innovative solution is a topsafe structure reinforcement system recently introduced to the majority of windows which makes our products more burglary resistant. Innovative Products In the prosky high pivot window, the sash is opened in a pivot way but the axis of rotation is situated above the window mid-height. Thanks to a unique hardware structure, it combines the advantages of centre pivot and top hung and pivot roof windows. The lower part of the sash fulfils the function of a top hung window, the upper being an additional source of light. The hinges have been moved upwards by 5-0cm (depending on the window height). By raising the axis of rotation, even a tall person can now freely approach the window edge. The sash, when rotated through 0 to 45, is supported by an innovatory auxiliary mechanism, which makes it possible to leave the sash open anywhere within this range. For washing, the sash can be locked by a bolt when rotated through 60, similar to any other centre pivot window. The high pivot windows come also with lower sashes. The lower sash is nonopening and fitted with a glazing unit with safety laminated glass which allows children a safe look outside. It offers unobstructed views even when in a sitting position. Installation of this window is performed in the standard way, 0 www.fakro.com identical to any other FAKRO roof window. In this solution, larger glazed area has been achieved by increasing the length of the window and not width. The FDY-V window size 78x06cm provides larger glazed area in comparison with 4x8cm. It is also necessary to underline that the higher from the floor level the widow is installed, the better the room illumination which can be achieved. So far, designing the correct room lighting was possible only by using a vertical combination of two roof windows. The roof window created by FAKRO, offering the height of more than 60cm, makes it possible to achieve the correct room illumination by installing a single Duet high pivot window. The window is available in heights of up to 06cm. Windows belonging to the prosky group are the only such product on the market which, after fitted in the roofs with pitches between 9 and 4 degrees, satisfy the requirements of DIN 504-*, according to which the lower window edge has to be situated 95cm above the floor level and the top minimum 0cm. Handle in the bottom section allows comfortable operating of the correctly installed FAKRO roof windows. The high pivot windows are adapted to FAKRO product system. It means that they can be installed with FAKRO flashings and equipped with accessories from FAKRO range. *standard in force in the German market
roof windows flashings for windows access roof windows smoke ventilation Safety and Anti-burglary Re-inforcement Results of test according to standard EN049 light tunnels Roof windows, apart from their basic functions such as providing light and ventilation, have also to ensure usage comfort and protect against easy access to the room. To date, it was difficult to formally evaluate safety of products. Nowadays, it is very straightforward as on February 007, there has been implemented the harmonised standard EN 45- for windows and doors in the whole of Europe. After a -year transitional period, the standard has been in force since February 00 and allows a direct comparison between parameters declared by individual manufacturers. It comprises, amongst others, the EN 049 standard which refers to roof windows and makes it possible to precisely determine the level of safety they provide. Testing is performed using a soft body with the weight of 50kg impacting from various heights on the weakest point of the window. The first safety class corresponds to the drop height of 0cm, second 0cm, third 45cm, fourth 70cm and fifth 95cm. Toughened glass and structure re-inforcement, make FAKRO windows achieve at least III class safety for the whole window including glazing as per EN 049. FAKRO were first to introduce to the market a full range of windows achieving at least III class safety, setting a new standard in the roof window sector. FAKRO roof windows are safe for people working on the roof and living in loft conversions. FAKRO recommend the use of roof windows with at least III class safety in the roofs with pitches below 0. A chimney-sweep, roofer, aerial fitter or person removing snow from the roof will not fall down through a roof window in case of accidental stepping on its sash. Fitting windows with increased burglary-resistance is of particular importance in low pitched roofs and multiapartment buildings. Such buildings often share the same staircase with entrance leading to the roof. It provides easy access to the roof for unauthorised individuals which brings a serious threat of break-in attempts. To minimise this risk, FAKRO have constructed and included in their standard range a window with increased burglary resistance FTP-V P Secure, which protects against different types of break-ins, such as: kicking or even jumping on the window, thanks to hardware in the topsafe system. Hinges installed in a way preventing their breaking off and forcing the sash inside, levering, because of a metal slat making break-in attempts with the use of tools more difficult and handle with a lock protecting against sash opening, easy removal of glazing unit, thanks to a special system protecting against unscrewing and forcing glazing out, easy glazing shattering thanks to laminated and anti-burglary glazing class PA. * standard in force in the German market solar collectors installation accessoris users guide INTRODUCTION
UNIVERSAL INSTALLATION SYSTEM Installation Brackets FAKRO roof windows are equipped with universal brackets, which allow installation either on trimmers or on rafters. Installation of the window at a chosen depth means that the milled groove marked with N, V, J letters is level with the top surface of the battens. The denotation of the depth of installation N, V, J corresponds to the last letter of denotation on the package of the flashing e.g. EZV flashing (E) type (Z) for tiled coverings with profile depth up to 45mm is assigned to the window installed on the depth V EHN flashing (E) type (N) for tiled coverings with profile depth of over 45mm is assigned to the window installed on the depth N. Installation on Trimmers The roof window is installed on trimmers when the rafter spacing is much bigger than the window width. When installing on trimmers we can move the window horizontally to better adjust the place of installation in relation to the roof material profile. On trimmers on the installation depth N Installtion of the window on trimmers On trimmers on the installation depth V 8 www.fakro.com
Installation on Rafters We install windows on rafters when the window width matches the spacing between rafters, it ensures stability of the construction and the durability of the connection. Installation on rafters is recommended especially when we replace old windows (in already existing roofs) with new ones or when we install big windows. When the window s width is bigger than the spacing between rafters we use trimmers in roof construction. Horizontal trimmer beams should be situated around 0-50 cm below the bottom and top edge of the window. It will allow proper lining construction of the window (bottom lining should be vertical to the floor and the head lining should be horizontal to the floor). roof windows flashings for windows access roof windows Installation on rafters Installation brackets in the position of installation on rafters smoke ventilation light tunnels solar collectors installation accessoris users guide Installation on trimmer beams INTRODUCTION 9
Windows FTT U6 Thermo FTT U8 Thermo The new highly energy-efficient roof windows FTT U6 Thermo and FTT U8 Thermo are characterised by specialist and innovative structure, ensuring high energy savings and comfort of use. The windows have been designed with regard to stringent requirements of energy-efficient buildings. The innovative structure of the FTT Thermo window exploits glazing units which are set in a specially designed sash frame. It offers wider wooden profiles in comparison with standard windows. Such structure minimises thermal bridging and provides improved window insulation. The FTT window is equipped with double-chamber, highly energy-efficient glazing unit U6. The glazing unit consists of three panes. The external and central panes are toughened, the internal being laminated (safety glass) class PA. The unit exploits two low-emission coatings and warm TGI spacers. The interpane voids are filled with inert gas argon. Such a glazing unit is characterised by superior thermal parameters Ug=0.5 W/m²K. Optionally, the window is also available with a triple-chamber glazing unit U8. The glazing consists of four panes. The external and central panes are toughened, the internal being laminated (safety glass) class PA. The glazing unit exploits three low-emission coatings and warm TGI spacers. Three inter-pane voids are filled with inert gas krypton. Such structure of the glazing unit enables achieving outstanding thermal parameters Ug=0. W/m²K. FTT Thermo window has specific functional properties. It is a centre pivot window, in which the axis of rotation of the sash was raised by about 7 cm above the geometric centre of the sash, so even even tall person can comfortably stand at the open window. The sash stops in the open position in the range from 0 to 45, because it is assisted by an innovative supporting mechanism. Large window sizes and raised axis of rotation secure lots of light in the attic and unobstructed access to the opened window. 6 www.fakro.com Features the sash frame is thicker in comparison with a standard window which significantly increases durability and the thermo-insulating properties of the whole product; outstanding energy saving two chamber glazing unit warm TGI spacing frames; the combination of two materials, plastic and metal, along with a proper TGI frame shape guarantees high tightness and low heat permeation; quadruple sealing system; all seals are made of the highest quality materials, thanks to their high flexibility and elasticity they adhere better to the pane further reducing heat loss; changed way of closing the sash without a traditional conventional locking mechanism. When the handle is turned, the sash is locked at both sides of the frame; effective protection against noise infiltration; installed in roofs with pitches between 5 and 70 ; wide range of accessories; 0 year warranty period; internal glass laminated according to Class B, PA. Technical Specification FTT U6 Thermo FTT U8 Thermo window U-value 0.47BTU/hr*sf*F / 0.8 W/m²K 0.0BTU/hr*sf*F / 0.68 W/m²K glazing U-value 0.088BTU/hr*sf*F / 0.5 W/m²K 0.05BTU/hr*sf*F / 0. W/m²K acoustic insulation Rw 8 db 8 db glazing unit 6H Tg8 4HT Tg8.T 4HT Tg0 4H Tg 4HT.T inert gas btwn panes argon krypton toughenedexternal glass yes yes varnishing layers two two rubber seals four four handle elegant * elegant * * multi point opening system - see page
Sizes of Standard Windows width/height 55/78 55/98 66/98 66/8 78/98 78/8 78/40 94/8 94/40 4/8 4/40 4/98 78/60 mm width.65.65 6 6 0.7 0.7 0.7 7 7 44.88 44.88 5.75 0.7 inches height 0.75 8.58 8.58 46.45 8.58 46.45 55. 46.45 55. 46.45 55. 8.58 6 inches introduction 0 0 0 0 04 05 06 07 08 09 0 all sizes in inches are approximates - skylights FTT U6 Thermo Highly energy-efficient window, coated with clear lacquer FTT U8 Thermo available email email email available email email email email email email email $096 $400 for pricing and additional info Non-standard Windows Additional Charges email email email Description of available products Additional charges Window with wooden elements painted in colours of RAL spectrum + 0 % to the price of window [0] painted with lazulite lacquer + 0 % to the price of window [0] in mahogany woodwork + 45 % to the price of window [5] in white polyurethane varnish + 0 % to the price of window [0] Window with claddings painted in colours of RAL spectrum + 0 % to the price of window [0] in metal covering copper Cu + 0 % to the price of window [0] in metal covering titanium-zinc TC + 0 % to the price of window [0] Window with glass L5 laminated, safe (class BB according to EN600) with easy maintenace layer + 0 % to the price of window [0] Blue + 0 % to the price of window Brown + 0 % to the price of window tinted glass [5] Grey + 0 % to the price of window Green + 0 % to the price of window reflective glass Blue Brown Grey Green Clear + 0 % to the price of window + 0 % to the price of window + 0 % to the price of window + 0 % to the price of window + 0 % to the price of window stained-glass single colour (outline) multi colour + 0 % to the price of window + 55 % to the price of window [5] obscure glass + 0 % to the price of window [0] Non-standard window FTP-V P dimensions: a (width) = 50 4 [cm] The price is calculated The price is calculated individually 5 b (height) = 78 60 [cm], Smax individually (a x b window surface) =.9[m²]. [5] Conservation window with the bar and metal covering in black, designed for older and historical buildings (FTT/C) Detailed information concerning non-standard windows on pages 56 60 [5] + 0 % to the price of window [0] flashings for windows access roof windows smoke ventilation light tunnels solar collectors installation accessoris users guide ROOF WINDOWS 7
FTU-V U PTP-V U FTT U6 Thermo FTT U8 Thermo introduction Window Specification Window U-value =.4 W/m²K Acoustic insulation Rw = db Window Specification Window U-value =.4 W/m²K Acoustic insulation Rw = db Window Specification Window U-value = 0.8 W/m²K Acoustic insulation Rw = 8dB Window Specification Window U-value = 0.68 W/m²K Acoustic insulation Rw = 8dB H G T R H G T R H G HT R P HT G HT R P flashings for windows Energy saving glazing unit: U-value =. W/m²K, according EN 67 H toughened glass G inert gas argon filled panes, T low emission coating, R warm frame. Energy saving glazing unit: U-value =. W/m²K, according EN 67 H toughened glass G inert gas argon filled panes, T low emission coating, R warm frame. Energy saving glazing unit: U-value = 0.5 W/m²K, according EN 67 HT toughened glass with low emission coating G inert gas argon filled panes H toughened glass R warm frame P laminated class PA Energy saving glazing unit: U-value = 0. W/m²K, according EN 67 HT toughened glass with low emission coating G inert gas krypton filled panes H toughened glass R warm frame P laminated class PA Glazing: 4H 6 4T Glazing: 4H 6 4T Glazing: 6H Tg8 4HT Tg8.T Glazing: 4HT 0 4H 4HT.T Automatic air inlet V40P with air flow up to 5 m³/h Air inlet V5 with air flow up to 4 m³/h access roof windows smoke ventilation Pinewood, vacuum impregnated, coated with three layers of white polyurethane varnish White multi-chamber PVC-U profiles strengthened with galvanised steel profiles. Pinewood, vacuum impregnated, coated with two layers of ecological acrylic lacquer Pinewood, vacuum impregnated, coated with two layers of ecological acrylic lacquer P P P P light tunnels solar collectors Seals: clinging seal border seal side seal P coated profile tightening the glazing. Seals: clinging seal border seal side seal P coated profile tightening the glazing. Seals: clinging seal border seal side seal P coated profile tightening the glazing. Seals: clinging seal border seal side seal P coated profile tightening the glazing. installation accessoris users guide Anodised handle Elegant with multi-point opening White handle Elegant with multi-point opening Anodised handle Elegant with multi-point opening Anodised handle Elegant with multi-point opening ROOF WINDOWS 9
SPECIAL FLASHINGS Flashing with Additional Thermal Insulation EHV-AT Thermo 6 4 5 Flashing cross-section with thermo insulation material A new and universal flashing EHT-AT Thermo with additional insulation is an ideal solution which guarantees tight and warm connection of the window with the roof covering. EHT-AT Thermo makes it possible to apply insulation of the window above the level of battens. To the inside of the flashing there is glued flexible insulating material which adheres tightly to window frame constituting a thermo-insulated frame. Thermo-insulating material has excellent insulting values (coefficient ). Below the level of the battens the window is insulated by a wool insulating kit XDP. The introduced Thermo flashing enhances U value of the window up to 5% depending on the window type, thus avoiding thermal bridging and heat loss. The EHV-AT Thermo is a universal flashing type and can be used with all types of roof coverings up to 90mm profile depth and with all wooden as well as aluminium-clad plastic roof windows. It is applied as standard to individual windows in the slope of the roof. The flashing may also be used as module flashing for windows used in horizontal and vertical combinations or block groups,is available for installation of windows at a depth V (0cm), on roofs with pitches between 5 and 90. Constituents of the Flashing The EHV-AT Thermo is a universal flashing type. Can be used with all types of roof coverings. The flashing is mm wider than standard and is made of four basic elements (bottom element, two sides elements and top element), each profiled with insulation material. In set, there are included proper width side covering profiles. The lower element has a long, wide aluminium plastic apron with an adhesive PVC fillet adhered to the underside. This allows the flashing to be adhered to the roof covering for a perfect fit. The flashing is equipped with side sealing channels to protect against wind blown dust, leaves, rain and snow. In the set there is a weep flap to allow condensation to drain away from the window, 78 www.fakro.com
Vertical and horizontal cross-section with EHV-AT Thermo elements top part of the flashings with insulation bottom part of the flashing with insulation and apron side parts with insulation ond sponge seals 4 gutter 5 aluminium strips to fix the flashing 6 tile supporting profile 4 6 60-0mm h introduction roof windows 90-0mm s 0-60mm access roof windows smoke ventilation light tunnels Sizes of Standard Flashing 55/78 55/98 66/98 66/8 78/98 78/8 78/40 94/8 94/40 4/8 4/40 4/98 78/60 0 0 0 04 05 06 07 08 09 0 solar collectors EHV-AT Thermo $54 $65 $7 $75 $75 $89 $00 $0 $4 $ $7 $4 $89 Non-standard Flashings Additional Charges Description of available flashings Additional charges Flashing with RAL palette colour Add a surcharge of 60% to the price of standard flashing [0] Use of CU/TC flashing Add about 00% to the price of standard flashing, depending on the raw material market prices [0] Non-standard flashing dimensions The price is calculated individually [0] installation accessoris users guide FLASHINGS FOR ROOF WINDOWS 79
Flat Roof System EFW 4 The EFW Flat Roof System makes it possible to install windows on flat or very low-pitched roofs. The system elevates the installation angle of the window by 5 in relation to the roof pitch. The system is mainly used in order to provide some more natural light into production halls and warehouses while at the same time maintaining good thermo-insulating properties. The system is also used when adapting the attic with low pitch roof to living space. It is normally used to install single windows in the roof. Windows can also be installed in horizontal combinations with a minimum distance of 0cm between them. To individual order the EFW sysem can be manufactured e.g. for three windows installed side by side. This system is intended to be used with flat roof coverings. Can be used on roofs with pitches between 0 and 5 Constituents of the System The EFW system is made up of two basic elements: a wooden housing with insulation material bonded to it, and flashing to join the window to the housing. Brackets for installing the window are included. After installing the wooden housing, it should be properly sealed and fixed to the existing roof covering. 8 www.fakro.com
Vertical and horizontal cross-section with Flat Roof System EFW elements top part of the flashing bottom part of the flashing side parts of the flashing 4 wooden kerb with insulation 4 6mm introduction roof windows A 4 access roof windows B 4 75mm window size A B 0 5 0 04 6 05 75 0 06 75 07 75 54 08 9 0 smoke ventilation light tunnels Sizes of Standard Flashing 55/78 55/98 66/98 66/8 78/98 78/8 78/40 94/8 94/40 4/8 4/40 4/98 78/60 0 0 0 04 05 06 07 08 09 0 solar collectors EFW $99 [x] [x] [x] [x] [x] [x] Non-standard Flashings Additional Charges [x] email info@foursevenfive.com for pricing Description of available flashings Additional charges Flashing with RAL palette colour Add a surcharge of 0% to the standard flashing [0] Use of CU/TC flashing Add about 80% surcharge to the standard flahing, depending on the raw material market prices [0] Non-standard flashing dimensions The price is calculated individually [0] installation accessoris users guide FLASHINGS FOR ROOF WINDOWS 8
Insulating Set XDP Exposed thermal insulation XDP insulating set is designed to enable fast and tight air-permeable and thermal insulation around the window to be installed. The set consists of airpermeable membrane and thermo-insulating material made of natural wool in shape of: wool cubes 50x50mm and 70x50mm, wool tress 50mm in diameter. The thermo-insulating material is made of specially impergnated sheep wool. Its proper density and high elasticity enables ideal adjustment of the material to the space it fills. Universal way of insulating enables roof window insulation irrespective of the roof opening size. Air-permeable collar is used to connect window with roof membrane. Is made of high quality and high vapour permeability mambrane which protects thermo-insulating material from moisture. The sides of the collar are prepared in such a way, so that they can be placed directly onto roof battens, irrespective of the spacing between them or their thickness. Collars should be chosen according to window size. Features of thermal-insulation made of natural sheep wool It has proper density and high elasticity which enables ideal adjustment of the material; enables placement of thermal insulation around the window reducing thermal bridging and ensures additional window insulation; material is easy to cut and form; natural and ecological product, smell free, does not cause eye irritation; thermo-insulating material enables various options of insulation depending on the type of installation. Features of air-permeable collar ensures easy connection of roof membrane with window; protects against moisture the insulation material installed around the window; requires no cutting of battens and counter battens; can be used with all window sizes; thermo-insulating material enables various options of insulation depending on the type of installation. 6 www.fakro.com
Elements of XDP set blocks of sheep wool tress made of sheep wool air-permeable collar 60-0mm h introduction roof windows 80-00mm flashings for windows s 0-60mm access roof windows smoke ventilation light tunnels Standard Sizes 55/78 55/98 66/98 66/8 78/98 78/8 78/40 94/8 94/40 4/8 4/40 4/98 78/60 78/80 78/86 78/06 94/60 94/80 94/86 94/06 0 0 0 04 05 06 07 08 09 0 40 CA CB 80 4 DA DB solar collectors XDP email info@foursevenfive.com for pricing Non-standard Linings Additional Charges Product description Additional charges XDP: in range of sizes: width 48 4 [cm], height 78 60[cm] The price is calculated individually [5] users guide INSTALLATION ACCESSORIES 7