MACHINES FOR PLASTIC PROCESSING IN THE packaging INDUSTRY power in plastics processing
Automatic Vacuum Forming Machines ECOFORMER KMV ECOFORMER KMV 53 E The high-performance automatic vacuum forming machines of the KMV series offer advantages that count. They stand out thanks to their flexibility, high degree of automation, simple operation and maximum efficiency. Steel-rule cutting and stacking unit are integrated into the machine. Whether ECOFORMER or the classical KMV-D machines, the KMV series is used in the manufacture of components made of PS, EPS, PP, PE, PVC and APET (with or without compressed-air support). It offers low production costs with maximum yield. Flexible adaptation to the forming area Pressure forming with 3 bar with maximum forming area, up to 5 bar with correspondingly reduced forming area for higher quality, even with short production runs. Improved air system The ECOFORMER supplies forming air to the forming tool extremely fast. The forming air also escapes suddenly. Both is responsible for a short cooling time and high-performance production. High heating performance 3 x heating length in lower and upper heater, movable close up to the tool for fast and uniform heating of the film and greater flexibility when selecting materials. Lower clamping frame The ECOFORMER does not need a pre-blow box. Besides better accessibility this permits the use of a lower clamping frame and additional possibilities in terms of tool design. Additional width adjustment An additional width-adjustment mechanism downstream of the stacking unit is available as an option for a more precise positioning of the products during the stacking process.
ECOFORMER KMV SERIES FOR ALL APPLICATIONS Precise, flexible, reliable The KMV series from KIEFEL equips you for all eventualities, allowing you to react quickly and efficiently to other production-related conditions. These automatic vacuum-forming machines make use of existing tools and can be re-tooled at surprisingly reasonable cost. Uncomplicated: The KMV series uses moulds and tools of simple design, making it ideal for use in the manufacture of short production runs and sample components. Reliability for large production runs: thanks to high production speeds and user-friendly maintenance. The automatic adjustment features help to ensure troublefree reliable operation. Powerful but frugal: The cutting guarantees maximum cutting precision, with plenty of power in reserve. Low energy consumption helps to cut your operating costs. Precision: The servomotors for the tables of the forming/cutting unit, for the ejector in the stacking unit, for the feed unit and for the chainwidth adjustment mechanism ensure high-precision movements and consistent quality. Technical Specifications KMV 53 D KMV 78 D KMV 53 E KMV 78 E Forming area, maximum 500 x 350 mm 19.69 x 13.78 in 769 x 540 mm 31.34 x 21.26 in 514 x 350 mm 20.24 x 13.87 769 x 540 mm 31.34 x 21.26 Positive formed part height 120 mm 4.72 in 150 mm 6 in 120 mm 4.72 in 150 mm 6 in Negative formed part height 40 mm 1.57 in 50 mm 1.97 in 40 mm 1.57 in 50 mm 1.97 in Pressure forming up to max. 3 bar 44 psi 2.5 bar 35 psi 3 5 bar 44 73 psi 2.5 5 bar 35 73 psi Functioning principle Film unreeling device Heating Forming Cutting Stacking Residual film winding unit
Automatic Pressure Forming Machines SPEEDFORMER KMD SPEEDFORMER KMD 78 B with Preheating Station KVH 83 Get the latest high-performance system for your production plant. The automatic pressure forming machines in the KMD series deliver both high performance and cost effectiveness regardless of whether you are handling PS, OPS, EPS, PP, PE, PVC, APET or CPET. The KIEFEL SPEEDFORMER stands for a new dimension in the mass production of packaging components. The effective machine concept and the future oriented control system guarantee high performance and efficient production. So what s the secret of this success? The high degree of automation and the ingeniously designed tool-change mechanism are worth mentioning in this context, as are the steel-rule cutter and the integrated stacking unit. FAST, QUIET, RELIABLE that s how KMD SPEEDFORMER work Productive You benefit from high yields, while profiting from low costs at the same time. All machines in the KMD series operate fast, quietly and with minimal energy consumption while delivering absolutely constant quality. Convenient The intelligent operational concept of the KMD series does not just make your production processes easier to control and track; it also helps to ensure that they meet your objectives. This saves on waiting and tooling time, while increasing efficiency. Flexible The KIEFEL modular system allows the machine configuration to be matched precisely to individual requirements. Maintenance-friendly The KMD series is designed to ensure that the tool change and all maintenance work can be done very quickly. So the maximum time of production is available.
SPEEDFORMER KMD SERIES Complex sequence of movements EASY to OPERAtE n Higher efficiency thanks to the optimised forming area of the SPEEDFORMER KMD n greater output thanks to the high cycle rate (up to 70 dry-cycles a minute) n Extremely short retooling times thanks to easy-to-use tool change system of optimised ergonomic design n Faster and more precise movements thanks to revolutionary control-system concept n touch-screen display system S P E E D F O R M E R g E N E R At i O N technical Specifications KMD 60 KMD 78 KMD 85 Forming area, maximum 580 x 440 mm 22.83 x 17.32 in 760 x 540 mm 29.92 x 21.26 in 830 x 680 mm 32.68 x 26.77 in Positive formed part height 120 mm 4.72 in 150 mm 6 in 150 mm 6 in Negative formed part height 120 mm 4.72 in 150 mm 6 in 150 mm 6 in Operating pressure 6 bar 87 psi 6 bar 87 psi 6 bar 87 psi Functioning principle Film unreeling device Heating Forming Cutting Stacking Residual film winding unit
KMD Series MODULAR STAGES The KMD Series machine configurations meet a variety of requirements: KMD-B Forming Cutting Stacking KMD-BFS for combined forming/cutting tools with steel-rule cutters KMD-F with punch presses Forming Cutting Stacking KMD-B SERIES The SPEEDFORMER KMD-B combines high flexibility and low energy consumption with a wide range of automatic adjustment possibilities. Tooling costs are reduced. Operation in combination with the clampingframe drives allows even complex formed components to be produced with maximum quality and at optimum cost. It is also possible to integrate additional drive systems for pre-streching plugs and mould release aids into the tables of the forming. The effect: closed pressure bells for positive or positive/negative formed components (e.g. hinged packaging, seed-planting trays, etc.). Forming and cutting of SPEEDFORMER KMD 78 B for lateral tool change
SPEEDFORMER KMD SERIES Forming/Cutting tools with steel rule cutters KMD-BFS SERIES The BFS system provides a cost-efficient alternative to conventional automatic forming/ cutting machines, and is ideal for the production of packaging components in small, medium and large production runs. High degree of cutting accuracy, even for materials with different rates of shrinkage No need to re-position the cutting tool Constant outstanding forming quality thanks to high clamping forces in the forming Low tooling costs with respect to conventional forming/cutting system, as there is no need for laborious re-grinding of the cutting contour Short tooling times: There is no need for adjustment of a separate cutting or the time-consuming replacement of the cutting blades and support plate Maximum flexibility: All common materials can be processed Low space requirement: There is no need for a separate cutting Eight-up lid tool for margarine tubs Punching presses for KMD-F SERIES Forming/Cutting with BFS tool KES punch press with optical-electronic positioning A further modular configuration of the KMD range consists of a combination with a KES-Series Punch Press. Two different sizes allow adaptation to individual applications. The chief advantages: Vertical punching movement for long tool life and controlled stacking Simple tool design means low tooling costs Optical-electronic positioning of the film track, with servomotoractuated positioning of guide element = precise punch positioning Easy access to all moving parts means simpler machine maintenance Integrated tool lift for easy tool change Punching press KES Series
Automatic Pressure Forming Machines THERMORUNNER KTR The THERMORUNNER automatic pressure forming machines of the KIEFEL KTR series offer you more for less: More quality, more possibilities and more convenience for less outlay. Optimised: Optimised forming area permits more cavities per tool and thus greater production output. Fast: Higher rate of production (42/45 cycles per minute), thanks to efficient tilting mechanism. Cost-efficient: Low variable costs, coupled with simple maintenance and long service intervals. User-friendly: User-oriented design for greater control and easier operation, ergonomic control panel. Modular configuration: Stacking and packaging unit can be configured and reconfigured as required. Compatible: Existing machine tools from other suppliers can be adapted simply. THERMORUNNER KTR 6 L SPEED THERMORUNNER KTR 6 L SPEED with KIST 78/56 Inline Stacking Systems CUP FORMING in a new dimension Power plus, with forming area of up to 780 x 560 mm. The THERMORUNNER KTR 6 L SPEED now is the top-of-the-range model of the KIEFEL THERMORUNNER series.
THERMORUNNER KTR SERIES THERMORUNNER KTR 5 SPEED THE MEASURE OF THINGS in tough competition With the THERMORUNNER KTR 5 SPEED particular attention has been put to a faster and more convenient machine concept of this machine size. It permits forming depths of up to 150 millimetres and can work with tools measuring up to 1040 x 410 mm. Maximum quality even at maximum output. THERMORUNNER KTR 4 SPEED Compact with high output The THERMORUNNER KTR 4 SPEED ensures that you are equipped for any task: Intelligent mechanical engineering, combined with advanced software design and a maximum of userfriendliness. The effect: You benefit from high output, while profiting from low costs. Expandable: THE MODULAR KIEFEL SYSTEM The KIEFEL automatic pressure forming machines can be expanded to meet requirements as they arise. Here are just a few examples: Unreeling for film rolls Pneumatic lifting mechanism for film rolls. Servo-actuated pre-tension device High-speed stacking unit Infrared-based control of film temperature Packaging unit Separate temperature-control system for lower heating unit Waste-material winding mechanism Automatic chain-spread mechanism Temperature control devices Granulators Technical Specifications KTR 4 KTR 5 KTR 6 L Forming area, maximum 535 x 390 mm 21.06 x 15.35 in 750 x 390 mm 29.53 x 15.35 in 780 x 560 mm 30.71 x 22.05 in Height of formed part max. 115/150 mm 4.5/6 in 115/150 mm 4.5/6 in 150/180 mm 6/7 in Compressed air 6 bar 85 psi 6 bar 85 psi 6 bar 85 psi
KVH SERIES Film pre-heating s High processing speeds and even heat distribution are the outstanding characteristics of KVH pre-heating units. Even polypropylene based film materials can be handled without difficulty. The pre-heating s of the KVH Series supply optimum results where the conditioning of thermoplastic film material is concerned. These stand-alone units can be used universally upstream of any forming machine. The key advantages KVH High heat performance with lower power consumption than roller contact-type heating systems Optimum heat penetration within the film with excellent temperature profile due to a long dwell time Excellent temperature distribution thanks to consistent heating of film material Minimal loss of heat due to the small distance to the automatic forming machine No additional startup loss thanks to a temperature control Low space requirement Large amount of film material held in reserve by meandering route of material strip No overheating of film material even during machine stop Stand-alone unit with integrated unreeling device can be used with all conventional automatic forming machines without modifying the control system Technical Specifications KVH 83 KVH 90 KVH 110 Film thickness 0,2 1,2 mm 0.008 0.05 in 0,2 1,2 mm 0.008 0.05 in 0,2 2,5 mm 0.008 0.05 in Roll magazine approx. 16 m approx. 52 ft approx. 23 m approx. 75 ft approx. 15.5 m approx. 51 ft Maximum film width 830 mm 32.68 in 900 mm 35.43 in 1100 mm 43.31 in FORMING TOOLS for the packaging industry We integrate thermoforming tools into our scope of supply. Comprehensive trials are the proof of our declared performance factors. A complete set of parameters is supplied along with the machine delivered, so you can start production at once. High performance tools for packaging applications
RM/TG/KTG Granulators RM The task of granulators is to convert the waste material produced during the thermoforming process into valuable plastic granules, thus ensuring continuous production in a closed material circuit. With its RM Series, KIEFEL can offer just the right granulator for each thermoforming unit fine-tuned to the requirements of each system in terms of capacity, contour and design. Designed for use with the thermoforming systems in the KMD, KTR and KMV Series Space saving provided by integration into the machine contour Reliable material-feed system Low-noise operation Space-saving layout of the granulator Temperature control units TG Two operating modes: for skeletal waste and formed film sections Compact temperature control units with electrical heating unit and direct cooling system with pressure-overriding circuit. These devices are designed for connection to an external cooling-water circuit. The circulating liquid is water Easy-to-operate, interface-compatible microprocessor-based control system High degree of adjustment accuracy Cooling devices KTG These compact air-cooled units are combined with a temperaturecontrol device to form a closed cooling circuit. Designed to operate independently Environment-friendly coolant Totally reliable safety system Precise control and display of all temperatures, pressures and circuit flow-rates Dialog-compatible microprocessor-based control system with plaintext messages and flow-chart display
KIEFEL with the power it takes KIEFEL is a world leader when it comes to the design and manufacture of machines used to process plastic film materials. The company offers core expertise in the fields of forming and joining technologies. As a supplier to reputable manufacturers in various sectors, KIEFEL serves customers in the automotive, medical technology, refrigerator and packaging industries. The headquarters of KIEFEL is in Freilassing/Germany. The company also runs its own network of sales and service centres in the United States, France, the Netherlands, Russia, China, Brazil, Indonesia and India and is represented by sales partners in more than 60 countries worldwide. KIEFEL is a member of the German Brückner Group, a worldwide leading supplier of plastics machinery. KIEFEL is certified to DIN EN ISO 9001:2000 standards. Company Address KIEFEL GmbH Industriestraße 17 19 83395 FREILASSING, GERMANY PO Box 3125 83397 FREILASSING, GERMANY Tel.: +49 / 8654 / 78-0 Fax: +49 / 8654 / 78-490 e-mail: kiefel@kiefel.de www.kiefel.de The data supplied by Kiefel in this brochure are technically oriented. Should any doubt whatsoever arise therefrom, said data are to be considered as approximate and not binding. Any data are legally binding only when express reference is made thereto on the contractual offers and acknowledgements of orders issued by Kiefel. Through the publication and/or presentation of any of its brochures or catalogues or any explanatory evidence or information supplied therein, Kiefel hereby legally assumes no consultative advisory obligation or liability whatsoever in as far as proprietorship of any Kiefel products is concerned and in connection with any specific aim or any technical or economical expectations by the user. 06/11 W EN 5041 Printed in Germany. Subject to technical modifications.