Sensor Holder for Dexis Sensors TM
Holder TrollByte Rayzor 510 15300510 Accessories TrollBag Rayzor 510 13190510 TrollByte Rayzor Tab 15300020 TrollByte Rayzor Arm 15300010 Bite block 1519002003 Aiming ring 1519001001
Attachment and removal Page 4-6 Arm Version Aiming Bitewings Anterior PA Posterior PA Page 7-8 Page 9-10 Page 11 Page 12 Tab Version Bitewings Anterior/Posterior PA Page 13 Page 14
Put the holder on the sensor The end with the slot must face the cord. The sensor holder is fully autoclavable. Configure the sterilization program in accordance with the autoclave manufacturer s instructions. Maximum temperature 273ºF (134ºC). Please note: The slot extension on the side should be withdrawn during autoclaving. Put the TrollBag Rayzor 510 sensor cover on 4
Attachment of the arm/tab The arm/tab contains small parts. Please check that it is unbroken. Do not use an arm, tab or bag that is broken. When attatching the arm/tab, it is very important to be careful when you ease the heel in (img. 1-3 below). Excessive force can puncture the sensor cover. Please note: The door lock must be open when you attach the holder arm/tab. Toe Heel 1. Insert the toe. 2. Press forward. 3. Ease the heel in and release. 4. Press to close the door lock. 5
Removal of the arm/tab NOTE: This procedure is shown without the sensor cover for detail. 1. 2. Press to open the door. 3. Press forward. 4. Ease the heel out. The arm, tab and the sensor cover are disposables, single use only. When removing the arm/tab, it is very important to be careful when you lift the heel. Excessive force can puncture the sensor cover. 6
Aiming The indicator pin shows the center of the sensor. X-ray tube The indicator pin is removable. 7
Aiming ring Image and ring position Anterior PA Posterior PA Bitewing Posterior PA Anterior PA Aiming ring attachment Dots facing the sensor. The aiming ring is fully autoclavable. Configure the sterilization program in accordance with the autoclave manufacturer s instructions. Maximum temperature 273ºF (134ºC). 8
Horizontal Bitewing Position for the ring, dots facing the sensor. 9
Vertical Bitewing Position for the ring, dots facing the sensor. 10
Anterior PA Position for the ring, dots facing the sensor. Use the bite block for all anterior periapical images. The bite block works as an extension of the biteplane and it allows you to place sensor as posterior as possible while maintaining support from the incisal edges of the front teeth. The bite block is fully autoclavable. Configure the sterilization program in accordance with the autoclave manufacturer s instructions. Maximum temperature 273ºF (134ºC). 11
Posterior PA Pull out the appropriate slot, for upper right/lower left or upper left/lower right quadrandts. Position for the ring, dots facing the sensor. 12
Tab Version Horizontal Bitewing Vertical Bitewing 13
Posterior PA Pull out the appropriate slot for upper right/lower left or upper left/lower right quadrandts. Anterior PA 14
To make excellent x-rays please note: Position the sensor where most space excist, normally the mid-palatal area. The TrollByte Rayzor gives you the angle and position of the sensor. How you use that information to acquire perfect images is up to you as a skilled dentist. You can find more information and videos at www.trolldental.com US Patent 7,140,770 B2 France Patent 1537453 Great Britain Patent 1537453 Germany Patent 60319389.7 Japan Patent 4464820 Sweden Patent 0202371-1 is committed and dedicated to the dentist and patient. We believe that TrollDental providing dentists with intelligent quality tools improves the ability of the dentist to more precisely diagnose and treat patients in a gentle way. Our goal is to provide tools that will ensure the success of the dentist and health of the patient. Trollhätteplast AB Box 900 S-461 29 Trollhättan SWEDEN
TrollByte Rayzor shall only be used as a holder for dental x-ray with Dexis digital sensor. The manufacturer and its dealers are not liable for any other use of the product. Always use a sensor cover to protect the sensor while taking x-rays. Clean prior to first use. TrollByte Rayzor can be cleaned by wiping it down with alcohol, washing it in a dishwasher/disinfector, or autoclave. Reuse without disinfection will lead to contamination and possible spread of infection. Store at room temperature, protected from dust and humidity. Do not expose to direct sunlight. Autoclave procedure Warranty TrollByte Rayzor is autoclavable. Configure the sterilization program in accordance with the autoclave manufacturer s instructions. Maximum temperature than 134ºC (273ºF). Please note that the retractable slots should be withdrawn during autoclaving. Place in the middle of the autoclave, not against the autoclave s walls or heating element. Warning: If the holder is exposed to pressure or weight exerted by other objects during autoclaving, it may deform. Please note: Any method of sterilization will shorten the life span of plastic parts. TrollByte Rayzor is manufactured using carefully selected plastic raw materials in order to achieve the product s unique characteristics. However, all plastic products have a limited service lifetime, and should be replaced at regular intervals. All types of cleaning reduce the product s service lifetime. The product should be replaced when its functioning and/or performance no longer satisfies the specifications in this manual. The manufacturer guarantees that the product will function as described in these instructions for 1 year after first use or a maximum of 75 autoclave cycles. Dexis is a trademark of Dexis, LLC of Hatfield, PA TrollByte Rayzor 510 15300510 Trollhätteplast AB Installatörvägen 9 461 37 Trollhättan Sweden +46 520 48 90 50 www.trolldental.com 2014-10-01 15300510/001