Automotive Industry Innovative Sealing & Polymer Solutions Saint-Gobain Seals
Engines Developments in internal combustion engine (ICE) technology are influenced by a variety of global trends. Many of them require engines to feature increased efficiency, fuel economy and reduced emissions. Our solutions are used in variable valve timing (VVT), belt tensioners, throttle bodies and fuel pumps. Our components feature low friction, sealing, dampening properties, simplified assembly and reduced weight. Meldin Bearings and Bushes Meldin HT Injection Molded Gears and Gerotors Meldin Seal Rings OmniSeal Shaft Seals Transmissions Increased efficiency is also one of the main trends in transmission developments. Our solutions are used in several transmission types as well as clutches and dual mass flywheels. We specialize in designing innovative solutions that reduce leakage, drag losses and component wear. Meldin HT Seal Rings Meldin 7000 and Meldin HT Thrust Washers Meldin HT Precision Components Braking Systems Today's braking systems offer more than just braking. Brake assist systems are one of the more recent developments where our sealing solutions are used to deliver lower friction and sealing, providing a lightweight solution compared to materials previously used. Meldin Brake Wear Sensors Emission Control Due to future emission requirements, the automotive industry continues to focus on solutions to reduce emissions (e.g., CO 2 ). With our decades of experience in innovative sealing solutions, we provide custom components for a wide variety of solenoid valve applications, including solenoids used in exhaust gas recirculation (EGR), Air Recirculation and Secondary Air Valve Systems. Rulon and OmniSeal Shaft Seals Rulon Valve Sensor Dust Seals
YOUR PARTNER IN AUTOMOTIVE APPLICATIONS ENGINES TRANSMISSIONS BRAKING SYSTEMS Gerotor for oil pumps Seal Ring for DCT and CVT Brake Assist Components EMISSION CONTROL Cup Seal for Solenoid Valve SUSPENSION STEERING CLIMATE CONTROL Cup Seal for Air Suspension System Seal Ring for HPS and EHPS Piston Ring for AC Compressor Proven in the Past... Saint-Gobain Seals has a proven track record supplying the automotive and transportation industry. For more than 40 years, we have been a reliable partner to Tier 1 and Tier 2 companies. Innovation is one of our key strategic pillars, ensuring a continuous development of solutions for main automotive challenges such as emission reduction and fuel efficiency.... Prepared for the Future
Suspension Comfort and safety are becoming increasingly important within the automotive industry. Car OEMs and their suppliers are developing advanced systems to meet the needs of their customers. Featuring low wear and friction, high temperature resistance and noise reduction, our components are designed for use in compressors for air suspension systems and shock absorbers. Rulon Guide Rings and Seal Rings Rulon Cup Seals Rulon Bearings and Bushes Steering A traditional application for our steering solutions, our products provide low friction, high wear resistance and NVH reduction in HPS, EHPS and EPS systems. Rulon Guide Rings and Seal Rings Rulon Slide Pads for Yokes Rulon Bearings and Bushes Climate Control Our expertise in climate control focuses on compressors for air conditioning, with products that offer light weight, high wear and temperature resistance as well as noise and vibration reduction. Rulon Piston Rings Meldin and Rulon Scroll Tip Seals OmniLip Lip Seals
Innovative Product Solutions for Emerging Technology Challenges in the Automotive Market Our unique experience allows us to design innovative sealing and bearing solutions that comply with the continuously increasing performance requirements in the automotive industry. Our Key Competencies include: Maintenance-free solutions Lightweight components Low friction materials Vibration control Noise reduction Excellent chemical resistance Low and high pressure sealing Low and high temperature resistance Products Main Features Spring-Energized Seals Temperatures from -268 C (-450 F) to + 316 C (+600 F). Pressure: Vacuum up to 3448 bar (50,000 psi). Low and controlled friction. Broad chemical resistance. PTFE Rotary Shaft Seals Broad temperature and chemical resistance range. Shaft speeds up to 30 m/s. Pressures up to 35 bar (508 psi). High-Performance Fluoropolymer Compounds Temperatures from -268 C (-450 F) to +316 C (+600 F). Low friction, high wear life and broad chemical resistance. Thermoset Polyimide Materials Temperatures from cryogenic through +316 C (+600 F), intermittently up to +482 C (+900 F). Superior strength and rigidity combined with self-lubrication properties. High-Performance Thermoplastic Materials Engineered plastics, PPS, PAI and PEEK matrix-based materials using our proprietary formulations of fillers for performance enhancement. Temperatures up to +280 C (+428 F).
For more information please call us, email us at sealsmarketing@saint-gobain.com, or visit our website at www.seals.saint-gobain.com. Manufacturing and sales locations Sales only locations R&D centers Manufacturing and sales locations 7301 Orangewood Ave. Garden Grove, CA USA 92841 Phone: +1-800-544-0080 386 Metacom Avenue Bristol, RI USA 02809 Phone: +1-401-253-2000 Am Nordkanal 37 47877 Willich, Germany Phone: +49 2154-600 Industria Aeroespacial 3601 Parque Industrial Saltillo-Ramos Ramos Arizpe, Coahuila, Mexico 25900 Phone: +52-844- 866-1200 120 Jardim Sao Matheus Vinhedo, Brazil 13280-000 Phone: +55 19-2127-8521 45-46 Avda Ebro Pol El Sequero 26150 Agoncillo, La Rioja, Spain Phone: +34 94-14-86-035 1468 Kun Yang Road Minhang Development Zone Shanghai, China Phone: +86 21-5472-1568 13th FL., Dongshin Bldg, 141-28 Samsung-Dong, Kangnam-Ku Seoul, South Korea, 135-090 Phone : +82-2-554-8041 10801-5, Haramura Suwa, Japan 391-0106 Phone: +81 266-79-6400 V.le Colleoni 3 Palazzo Taurus 2 20864 Agrate Brianza (MI), Italy Phone: +39 039 657891 Saint-Gobain Advanced Materials Co., Ltd 3F-1, No. 147, Section 2 Jianguo North Road Taipei, Taiwan 104 Phone: +886-2-2503-4201 Sales only locations Grindwell Norton Limited Devanahalli Road Via Old Madras Road Bangalore, India 560049 Phone: +91 80 30978888 Dertinger Weg 10, 97877 Wertheim Bettingen, Germany Phone: +49 9342 9266-0 Am Herrnberg 8, 98724 Neuhaus am Rennweg, Germany Phone: +49 3679 7913-0 Heiveldekens 22 2550 Kontich, Belgium Phone: +32 3-458-2828 ul. Norton 1 62-600 Kolo, Poland Phone: +48 63-26Fuchu South Building 6F, 1-40 Miyamachi Fuchu-City, Tokyo, Japan 183-0023 Phone: +81 42 352 2100 OmniLip is a trademark of Saint-Gobain Performance Plastics Corporation. DynaLip, Fluoroloy, Marathon, Meldin, OmniSeal, Transband and Rulon are registered trademarks of Saint-Gobain Performance Plastics Corporation. Limited Warranty: For a period of 6 months from the date of first sale, Saint-Gobain Performance Plastics Corporation warrants this product(s) to be free from defects in manufacturing. Our only obligation will be to provide replacement product for any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risks, if any, including the risk of injury, loss or damage, whether direct or consequential, arising out of the use, misuse, or inability to use this product(s). SAINT-GOBAIN PERFORMANCE PLASTICS DISCLAIMS ANY AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NOTE: Saint-Gobain Performance Plastics Corporation does not assume any responsibility or liability for any advice furnished by it, or for the performance or results of any installation or use of the product(s) or of any final product into which the product(s) may be incorporated by the purchaser and/or user. The purchaser and/or user should perform its own tests to determine the suitability and fitness of the product(s) for the particular purpose desired in any given situation. 2015 Saint-Gobain Performance Plastics BST-4182-AUTO-0615