KASTOspeed: High-Performance Automatic Circular Sawing Machines for Economical Cutting of Large Batches of Steel and Non-Ferrous Metals.
High-Performance at a Rapid Pace Fully Automatic Circular Saws, KASTOspeed Series KASTOspeed: Fast and precise cutting of large batches. KASTOspeed 9: for material cross-sections up to 90 mm (3 1 2 ). Experts count on KASTO s competence. Metal impact plants, forge shops, manufacturers of fittings and electrical parts, steel service centers and almost every automotive supplier use the services of KASTOspeed when cutting sections of steel and non-ferrous metals. These automatic circular saws satisfy because of minimal cycle times and they produce millions of accurate cut-off pieces during two or three-shift operations per year. Thanks to their high reliability and precision in continuous operation, the KASTOspeed automatic circular saws are worldwide one of the top-selling, mass-cutting circular saws of their kind. Large-scale production in continuous operation is accomplished by the KASTOspeed 9 when producing cut-off pieces of steel and non-ferrous metals with a material cross-section up to a diameter of 90 mm (3½ ). According to the chips produced by the cutting action of the material and the product requirements, HSS solid steel or carbide one-way saw blades with appropriate cutting speeds are used. The optimal position of the saw carriage and the four-point material clamping device enable shortest cutting paths. For the handling of bars and cut-off pieces, different possibilities are offered. The saws can be interlinked to storage systems and machining centers. KASTOspeed C 9 with tilting table for cut-off pieces up to 1000 mm (40 ) and a container for trim cuts and remnant ends
Inclined magazine with loading discs and infeed roller conveyor Siemens operator s interface panel with input via touch screen Operational range with adjustable saw blade guide (patented), measuring stop and outfeed conveyor for cut-off pieces (optional accessory) Bar pusher carriage with linear guide system and material guide rail Technical Data KASTOspeed C 9 KASTOspeed M 9 Material Steel Non-ferrous Saw blade type Carbide tipped Carbide tipped/hss Saw blade diameter mm / in 250/285/315 / 10 /11 1 4 /12 1 2 250-315/250-350 / 10-12 1 2 /10-13 3 4 Cutting width (blade kerf) mm / in 2.0/2.0/2.5 /.078 /.078 /.098 up to 3.5 / up to.138 Cutting range Dimensions and weight (Basic machine up to 300 mm (12 ) cut-off length, without infeed equipment) Round mm / in 15-90 / 5 8-3 1 2 15-90 / 5 8-3 1 2 Square mm / in 15-80 / 5 8-3 1 8 15-80 / 5 8-3 1 8 Rectangular (H x W) mm / in 15x15-85x80 / 5 8 x 5 8-3 3 8 x3 1 8 15x15-120x75 / 5 8 x 5 8-4 3 4 x3 Min. remnant end mm / in 55 / 2 3 16 55 / 2 3 16 Performance characteristics Length mm / in 1600 / 63 1600 / 63 Width mm / in 1950 / 77 1950 / 77 Height mm / in 2150 / 85 2150 / 85 Weight Kg / lbs 2300 / 5000 2300 / 5000 Total power requirement of machine in basic configuration kw / HP 12 / 16 25 / 34 Cutting speed m/min / ft/min 16-225 / 50-740 sfpm 850-3900 / 2800-12800 sfpm Saw blade feed rate, infinitely adjustable mm/min / in/min approx. 50-2000 / 2-80 approx. 125-7500 / 5-300 Rapid return of saw blade feed mm/min / in/min approx. 8500 / 335 approx. 10000 / 395 Rapid return of bar pusher carriage m/min / ft/min 120 / 395 120 / 395 Workpiece clamping force N / lbs 2000-10000 / 450-2250 lbs 2000-10000 / 450 2250 lbs (Other cutting speed ranges and saw blade drive motors upon request) 3
Trouble-Free in Continuous Multiple Shift Operation: KASTOspeed Circular Sawing Machine KASTO Technology: Powerful solutions for high profitability. KASTOspeed sawing machines for large batches set the pattern for mass cutting of steel, aluminum, brass, and copper. Solid high speed steel (HSS) and carbide-tipped saw blades are used according to the application. This guarantees highest chip production because of the rugged machine construction. Further advantages of the KASTOspeed: short cycle times due to the fast bar pusher carriage as well as the hydraulically cushioned length gauge. KASTOspeed 15: For material cross-sections up to 150 mm (6 1 2 ). KASTOspeed 15 automatic circular saws fulfill the highest requirements in power and efficiency when cutting steel with tensile strengths up to approx. 1.400 N/mm (200,000 psi) also highalloyed steel using one-way carbide saw blades and HSS solid saw blades. The model M15 is used for cutting non-ferrous metals with HSS or carbide tipped saw blades. The solid machine construction with its helical high-performance saw carriage gearing in combination with a hydraulically cushioned length gauge and a fast positioning bar pushing carriage guarantees highest production performance for precise cut-off pieces. Additionally to the standard equipment, extensive customer-oriented peripheral solutions are available for the efficient processing of your cutting requirements. For easy and clear input of cutting jobs a user-friendly programmable controller with operator interface panel is integrated.
Manually adjustable length gauge, e.g. with 1000 mm (40 ) cut-off length Flat magazine in combination with a bundle loader (option) Saw carriage with saw blade guide for the KASTOspeed C15 NC length gauge for cut-off lengths up to 1000 mm (40 ) (option), alternatively available for 2000 mm (80 ) (option) Technical Data KASTOspeed C 15 KASTOspeed M 15 Material Steel Non-ferrous Saw blade type Carbide tipped Carbide tipped/hss Saw blade diameter mm / in 360/425/460 / 14 /16 3 4 /18 360/425/460 / 14 /16 3 4 /18 Cutting width (blade kerf) mm / in 2.6/2.7 /.102 /.106 2.6/2.7/3.0-3.6 /.102 /.106 /.118-142 Cutting range Round mm / in 20-153 / 3 4-6 20-153 / 3 4-6 Square mm / in 20-135 / 3 4-5 1 4 20-135 / 3 4-5 1 4 Rectangular (H x W) mm / in 20x20-155x135 / 3 4 x 3 4-6 x5 20x20-155x135 / 3 4 x 3 4-6 x5 Min. remnant end mm / in 70 / 2 3 4 70 / 2 3 4 Dimensions and weight (Basic machine up to 300 mm (12 ) cut-off length, without infeed equipment) Length mm / in approx. 1700 / 67 approx. 1700 / 67 Width mm / in approx. 2500 / 98 approx. 2500 / 98 Height mm / in approx. 2050 / 81 approx. 2050 / 81 Weight kg / /lbs 2600 / 5700 2600 / 5700 Performance characteristics Total power requirement of machine in basic configuration kw /HP 27 / 36 HP 40 / 54 HP Cutting speed m/min / in/min 20-160 / 65-525 sfpm 900-4000 / 3000-13000 sfpm Saw blade feed rate, infinitely adjustable mm/min 25-1100 / 1-43 150-5000 / 6-200 Rapid return of saw blade feed mm/min ca. 10000 / 390 ca. 10000 / 390 (Other cutting speed ranges and saw blade drive motors upon request) 5
Equipment Details and Accessories Material infeed adapted to the cutting task. Outfeed and sorting without an operator important precondition for an effective handling. Chip disposal and environmental protection. In order to store large numbers of bars on the infeed side of the machine, different kinds of magazines are available. Starting with the inclined magazine on which one layer of material is pre-stored, bundle loader on which one bundle is singled fully automatically, or flat magazine for square and special profiles as well as for surface-sensitive materials, different accessories are available for an extended operation with limited operator involvement. With the direct supply out of a KASTO storage system, several material bundles can be processed fully automatically one after the other. Trim cuts and remnants are separated from the good pieces at the outfeed side. According to the cut-off length and cutting task a sorting slide or a tilting table can be offered. More containers for good cut-off pieces can optionally be positioned in the discharge area. An even higher grade of automation offers a robot sorting device which stacks the parts with different grippers according to the cutting requirement into customer-provided containers. For the disposal of chips produced during cutting, sturdy chip conveyors as well as powerful suction units of different designs are available. Electrostatic air filters are also available for reduction of coolant emission fumes. Bundle loader with material in loading position. Flat magazine for square and special profiles. KASTOspeed M9 with chip exhaust system for aluminum chips. Tilting table for long cut-off pieces. Sorting gate for remnants, trim cuts and good parts. Electrostatic air filter and signal lamp.
Sorting device with several container locations for cut-off pieces Outfeed conveyor for cut-off pieces with pusher device (discharge to the left ) Removal and sorting of small parts by a robot Tilting table with trough-type transfer device and remnant end container Removal of cut-off pieces with an especially designed vacuum gripper Sorting and counting device for cut-off pieces Qualified Advice, Reliable Service: Success Factors for a Long-Term, Efficient Installation. The competence for solutions does not end with the sawing machine. Competent advice is available at the beginning to assure a successful application of KASTOspeed circular sawing machines and is based on extensive technology, cutting trials, and long-term experience in all different kinds of applications. For this reason other functions such as material infeed, material supply out of storage systems, and fully automatic sorting and stacking of cut-off pieces by robot are used. Longterm advantage also with later adaptations and supplements is the machine control developed by KASTO operating with established industrial hardware. Satisfied customers are no coincidence. Training towards the success of our customer s installation is a company policy of KASTO. Therefore service is an important part of a long-term partnership for a durable efficiency and reliability of KASTO products. Often a problem can be solved by the machine operators after an advisory service by phone. Supply and shipment of spare parts is normally carried out the same day of the malfunction notice. Competent help on site, when required, is performed by especially trained service technicians. 7
The Complete KASTO Program: Economic Sawing and Storing of Metal Expertise right down the line For over 160 years, KASTO has been recognized for quality and innovation, and offers a complete range of metal cutting saws, as well as storage and retrieval systems. Thanks to an ongoing development of new technologies and constant optimization process of machine concepts, KASTO has achieved the status of market leader in sawing and storing of metals. KASTO s Sawing Machines From the basic hacksaw to the high-performance automatic bandsaw capable of economically processing bar stock, blocks or plates of all grades, KASTO has the best solution for every challenge: Universal bandsaws and circular saws for light and medium applications, hacksaws employing the pushing-arching-cutting motion originated by KASTO, and production bandsaws and circular saws designed to cut medium to difficult materials. KASTO s Storage Systems Rapid access, optimum space utilization, clear and accurate view of stored inventory KASTO storage systems excelling features. And there s more! Fully automatic sawing centers, cantilever bar and sheet metal storage systems or cassette storage and commissioning systems, combined sawing and storage systems with integrated inventory control computers. As a one-source supplier, KASTO delivers the complete system, both hardware and software. KASTO s Service 02880660 / 08.08 / 2k / Konkordia. We reserve the right to make technical changes. Your KASTO Partner KASTO s comprehensive service program includes everything: from commissioning and training to maintenance support, service contracts, readily available spare parts and on-site service. KASTO s service incorporates individual consulting and immediate support with well-qualified teleservice. And of course, KASTO service is available worldwide. KASTO Maschinenbau GmbH & Co. KG Industriestr. 14 77855 Achern/Deutschland Telefon +49 7841 61-0 Telefax +49 7841 61-355 E-Mail kasto@kasto.de Internet http://www.kasto.de