MATERIAL SAFETY DATA SHEET

Similar documents
MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

[MATERIAL SAFETY DATA SHEET (MSDS)]

[MATERIAL SAFETY DATA SHEET(MSDS)]

[MATERIAL SAFETY DATA SHEET (MSDS)]

CPC TDAE 3.1 I. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Section 1 - Chemical Product and Company Identification. Section 2 - Composition, Information on Ingredients

Material Safety Data Sheet

NutriPlus Nutrient Package SAFETY DATA SHEET

Manufacturer Dimmitt Sulfur Products, Ltd Hwy 194 SE P.O. Box 1008 Dimmitt, TX T /19/2014 EN (English US) 1/6

SAFETY DATA SHEET. #358NVOC Liquid Flux. MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Qualitek International, Inc.

Optima Chemical Group LLC Revision : 1 Page 1 Product Name: tert-butyl-dichlorophosphine of 6 Material Safety Data Sheet Effective Date: 6/10

MSDS Number: T6800 * * * * * Effective Date: 11/17/99 * * * * * Supercedes: 12/08/96 TRIPHENYLMETHANOL

3D Printing Filament NYLFORCE GF Rev 00 MATERIAL SAFETY DATA SHEET Page 1 of 7

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY

MATERIAL SAFETY DATA SHEET

EYES: May cause eye irritation. Toxicological properties of this material have not been fully investigated.

1.4. Emergency Telephone Number Emergency Number : INFOTRAC ; EPA National Response (800)

Material Safety Data Sheet

: BIO 101 Bio-Zyme Cleaner/Deodorant

Material Safety Data Sheet

10% Ultramarine Violet 5011

W2388BASE PLASTIC ERASER COMPOUND

AJINOMOTO CO., INC Specialty Chemicals Department Material Safety Data

1-OCTANESULFONIC ACID SODIUM SALT, MONOHYDRATE

SAFETY DATA SHEET 1. IDENTIFICATION OF THE SUBSTANCE/MATERIAL AND THE SUPPLIER 2. HAZARD IDENTIFICATION. Date of Issue: 9/5/18. Product Number: DTC-2

1. PRODUCT AND COMPANY IDENTIFICATION. : Product Stewardship (770)

MATERIAL SAFETY DATA SHEET WATERLOO, ON, N2V 1A1

DST PLAD Durable Adhesive

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week)

Polysorbate Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET ADEKA NOL UH-756VF

: Polyethylene Polymer

SAFETY DATA SHEET. SECTION 1: Identification of the substance/mixture and of the company/undertaking

Sodium Silicate, 42 Be'

SAFETY DATA SHEET. SECTION 1: Identification of the substance/mixture and of the company/undertaking

: NxGen Lambda Exonuclease

Safety Data Sheet. Triton X-45. In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week)

CALCIUM PHOSPHATE DIBASIC

Material Safety Data Sheet

Bioland Scientific LLC

MATERIAL SAFETY DATA SHEET LUMIFLON FE4300

Issue Date 29-Apr-2015 Revision Date 29-Apr-2015 Version 1 1. IDENTIFICATION. Ferrous Oxalate, Dihydrate. Iron (II) Oxalate Dihydrate

POTASSIUM BICARBONATE

1. PRODUCT AND COMPANY IDENTIFICATION. : Product Stewardship (770)

PHENOL RED, FREE ACID

SAFETY DATA SHEET Multi-Purpose Cleaner Product # MPC-404

Safety Data Sheet according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations

SAFETY DATA SHEET ZERO VALENT IRON

Polysorbate Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET

: Phosphate Standard, 1000ppm PO4

POTASSIUM CITRATE. 2. Composition/Information on Ingredients

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING

2.3. Other Hazards Exposure may aggravate pre-existing eye, skin, or respiratory conditions.

Material Safety Data Sheet BC-40

Tea Seed Pellets Date of Issue: 19 th Sept 2017 Version 2

CAS-No. EC-No. Index-No. Concentration [%] 2-Acetylthioethyltrimethylammonium iodide

GLYCINE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification

SAFETY DATA SHEET. Q-Pearl Solder Spheres - LF (Sn96.5/Ag3.0/Cu0.5)

SAFETY DATA SHEET. Q-Pearl Solder Spheres - LF (Sn96.5/Ag3.0/Cu0.5)

8.3 (N)ER Model Load Chain Grease Material Safety Data Sheet (MSDS)

: Focus MP 11 Multi-Purpose Cleaner

PS 1823 Hot Melt November 3, 2015 ***SAFETY DATA SHEET *** Page 1 of 5

SAFETY DATA SHEET. Qualitek Acid Cleaner MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Qualitek International, Inc.

Material Safety Data Sheet

Reno Spray Buff RTU

Cuprous Iodide CAS No

SAFETY DATA SHEET. SECTION 1: Identification of the substance/mixture and of the company/undertaking

Bergamid A70 G30 natural

: Safranin, 1% Aqueous

Potassium Sulfite 45%

Revision Date 6-May-2015 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION. Foremost 3343A Fast Dry Fissure & Crack Filler, Part A

Safety Data Sheet. In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week)

SAFETY DATA SHEET. SECTION 1: Identification of the substance/mixture and of the company/undertaking

Haynes Silicone Grease. Haynes Manufacturing Co. Food-Grade Silicone Grease Compound Detroit Road Westlake, Ohio 44145, USA

PANTONE 365U

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET (SDS)

KANO LABORATORIES, INC. SAFETY DATA SHEET SECTION 1: PRODUCT AND COMPANY IDENTIFICATION SECTION 2: HAZARDS IDENTIFICATION

Orchid Extract, Oil Soluble Safety Data Sheet

Material Safety Data Sheet

D-(+)-Lactose, Monohydrate

TRIACETIN SECTION 1: IDENTIFICATION SECTION 2: HAZARD IDENTIFICATION. Product Name: Triacetin. CAS Number: Chemical Formula: C9H14O6

MATERIAL SAFETY DATA SHEET

Patriot #3 Neutral Cleaner Concentrate

SAFETY DATA SHEET. SECTION 1: Identification of the substance/mixture and of the company/undertaking

: GAL-Xe ONE Minis

phone numbers only in the event All non-emergency questions should be directed to Customer Service ( ) for assistance.

MATERIAL SAFETY DATA SHEET MSDS #: 166 BLACK LIQUOR SOAP 1. PRODUCT AND COMPANY IDENTIFICATION

Potassium Chloride Saturated, Aqueous

Safety Data Sheet GRADE : PC EN IDENTIFICATION OF THESUBSTANCE/PREPARTION AND OF THE COMPANY/UNDERTAKING

Safety Data Sheet. Synonyms/Generic Names: Phthalocyanine metal complex dye in aqueous solution

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. Emergency Information: (248) Medical Emergency Phone: Poison Control Ctr. (248) fax

200CPEN PANTONE(R) 200 C SIMULATION

: Sodium Sulfite, 5% w/v

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION. Revised on 12/15/2015 Page 1 of 5

1. PRODUCT AND COMPANY IDENTIFICATION

Transcription:

NIPPON CHEMICAL INDUSTRIAL CO., LTD. Page 1 5 MATERIAL SAFETY DATA SHEET [ HISHICOLIN PX-4ET ] MSDS No.: 2101060203 Established: 02/22/1993 Revised: 10/21/2005 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME (GRADES): HISHICOLIN PX-4ET NAME OF MANUFACTURER: NIPPON CHEMICAL INDUSTRIAL CO., LTD. HEAD OFFICE (ADDRESS): 11-1, 9-chome, Kameido, Koto-ku, Tokyo, 136-8515, Japan NAME OF SECTION: Organic Chemicals Sales Dept., Organic Chemicals Division TEL. +81-3-3636-8048, FAX. +81-3-3636-8132 EMERGENCY TELEPHONE: Same phone number listed above 2. COMPOSITION/INFORMATION ON INGREDIENTS SUBSTANCE OR PREPARATION: Substance CHEMICAL NAME (GENERIC NAME): Tetra-n-butylphosphonium O,O-diethylphosphorodithionate INGREDIENTS AND COMPOSITION: min 95% CHEMICAL FORMULA: (n-c4h9)4p + - S(S)P(OC2H5)2 CAS No.: 96131-57-6 JAPANESE OFFICIAL GAZETTE SERIAL No.: 2-3487, 2-1982 TSCA INVENTORY: None EINECS No.: None INGREDIENTS CONTRIBUTING TO THE HAZARD: Tetra-n-butylphosphonium O,O-diethylphosphorodithionate INPURITIES CONTRIBUTING TO THE HAZARD: None 3. HAZARDS IDENTIFICATION MOST IMPORTANT HAZARDS: HUMAN HEALTH: Irritating to skin, eye and mucous membrane. PHYSICAL AND CHEMICAL HAZARDS: Decomposed by heating and bases, liberating hydrogen sulfide gas (toxic gas). SPECIFIC HAZARD: No information MAIN SYMPTOM: No information 4. FIRST-AID MEASURES SKIN CONTACT:

NIPPON CHEMICAL INDUSTRIAL CO., LTD. Page 2 5 In case of contact, immediately wash with soap or mild detergent and large amount of water until no evidence of chemical remains (at least 15-20 minutes). Get medical attention, if needed. EYE CONTACT: In case of contact, immediately rinse the eyes with plenty of water, occasionally lifting upper and lower lids, until no evidence of chemical remains. Get medical attention immediately. INGESTION: If vomiting occurs, keep head lower than hips to help prevent aspiration. Get medical attention, if needed. 5. FIRE-FIGHTING MEASURES EXTINGUISHING MEDIA: Carbon dioxide, regular dry chemical, regular form, plenty of water SPECIFIC HAZARDS: In case of fire, large amount of phosphorus pentoxide (P2O5) and sulfur dioxide (SO2) aerosol are emitted. PROTECTION FIRE-FIGHTERS: Firefighters should wear full body suit, and use air line respirator or breathing apparatus. 6. ACCIDENTAL RELEASE MEASURES PERSONAL PRECAUTIONS: Avoid contact with skin and eyes. Wear eye/face protection. Wash imm ediately after handling. EN VIRON MENTAL PRECAUTIONS: Do not wash away into waterway. METHODS FOR CLEANING UP: Small liquid spills: Absorb with sander other noncombustible material. Collect spilled material in appropriate container for disposal. Large spills: Dike for later disposal. Keep unnecessary people away, isolate hazard area and deny entry. Stay up wind and keep out of low areas. 7. HANDLING AND STORAGE HANDLING: TECHNICAL MEASURES: Avoid contact with skin and eyes. Wear eye/face protection. Wash immediately after handling. PRECAUTIONS: Avoid heating and mixing with bases in order to prevent evolution of flammable hydrogen sulfide gas. SAFE HANDLING ADVICE: Wear proper protective equipment (gloves, safety

NIPPON CHEMICAL INDUSTRIAL CO., LTD. Page 3 5 STORAGE: TECHNICAL MEASURES: STORAGE CONDITIONS: INCOMPATIBLE PRODUCTS: PACKAGING MATERIALS: spectacles, etc.) during use. Keep away sunlight. Avoid storing at elevated temperature. Keep container tightly closed. Store in cool and dark location. Metals and bases Resins and plastics 8. EXPOSURE CONTROL/PERSONAL PROTECTION ENGINEERING MEASURES: Provide local exhaust ventilation system. Ventilation equipment should be explosion-resistant if explosive concentrations of material are present. Ensure compliance with applicable exposure limits. PERSONAL PROTECTIVE EQUIPMENT: RESPIRATORY PROTECTION: Under conditions of frequent use or heavy exposure, respiratory protection may be needed. Respiratory protection is ranked in order from minimum to maximum. Consider warning properties before use. Any chemical cartridge respirator with organic vapor cartridge(s) and any chemical cartridge expiratory with a full-face piece and organic vapor cartridge(s) should be employed. HAND PROTECTION: Wear appropriate chemical resistant gloves. EYE PROTECTION: Wear splash resistant safety goggles with a face shield. Provide an emergency eye wash fountain and quick drench shower in the immediate work area. SKIN AND BODY PROTECTION: Wear appropriate chemical resistant clothing and gloves. HYGIENE MEASURES: Any air-purifying respirator with a full-face piece and an organic vapor canister. For Unknown Concentrations or Immediately Dangerous to Life or Health: Any supplied-air respirator with full-face piece and operated in a pressure demand or other positive-pressure mode in combination with a separate escape supply. Any self-contained breathing apparatus with a full-face piece. 9. PHYSICAL AND CHEMICAL PROPERTIES PHYSICAL STATE: FORM: COLOUR: ODOR: Viscous liquid at room temperature Light yellow No odor or slight hydrogen sulfide odor

NIPPON CHEMICAL INDUSTRIAL CO., LTD. Page 4 5 ph VALUE: Not applicable FLASHPOINT: 243 EXPLOSION PROPERTIES: EXPLOSION LIMIT: Not available DENSITY: Not available SOLUBILITY: Soluble in methanol and toluene. Insoluble in water. 10. PHYSICAL HAZARD (STABILITY & REACTIVITY) STABILITY: CONDITION TO AVOID: Approximately 6.5% of product is decomposed by heating at 80 for 7 days. Sunlight or ultraviolet rays may cause sometimes color change of product. MATERIALS TO AVOID: Metals are corroded for long term, changing product color. HAZARDOUS DECOMPOSITION PRODUCTS: Hydrogen sulfide, oxides of sulfur (sulfur di and tri oxide), phosphorus, phosphine gas 11. TOXICOLOGICAL INFORMATION ACUTE TOXICITY: ORAL: Not available LOCAL EFFECTS: Irritating to skin, eye and mucous membrane. Decomposed by heating and bases, liberating hydrogen sulfide gas. 12. ECOLOGICAL INFORMATION PERSISTENCE/DEGRADABILITY: Organic phosphine oxides formed by contact with air and other oxidizing materials are not readily biodegradable. 13. DISPOSAL CONSIDERATION WASTE FROM RESIDUES: Whatever can not be saved for recovery may be burned in an approved incinerator or disposed in an approved waste facility. Ensure compliance with regional or national regulations. CONTAMINATED PACKAGING: Dispose according to regional or national regulations. 14. TRANSPORT INFORMATION INTERNATIONAL REGULATIONS: None allocated

NIPPON CHEMICAL INDUSTRIAL CO., LTD. Page 5 5 UN CLASS: None allocated 15. REGULATORY INFORMATION 16. OTHER INFORMATION Notices 1) The Material Safety Data Sheet is a brief summary of general precautions necessary for proper use of Our Company Product. For a special use and handling, use upon safety confirmation and implementation of the measures suited to the application. 2) The contents entered into this sheet was prepared based on the documents and test data available at the time of preparation but does not guarantee at all the descriptions of Composition/Information on Ingredients, Physical & Chemical Properties and Hazards Identification. 3) Every chemical product may present unknown hazards and should be used with utmost caution. All users should bear the responsibility of setting of the safe use conditions. 4) The information herein is subject to change by new findings such as new literatures and test results and revisions of laws and regulations.