FOR CHEMICAL EMERGENCY, SPILL, LEAK, FIRE, EXPOSURE, OR ACCIDENT: In the continental U.S.:

Similar documents
MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MSDS No.: 006 Revision No.: 2 Date: 12/01/04

SAFETY DATA SHEET Vitrified Grinding Wheels SDS #3

Safety Data Sheet Vitrified Grinding Wheels

SAFETY DATA SHEET. Section 1 Identification. Section 2. Hazard Identification. Section 3. Composition / Information On Ingredients

MATERIAL SAFETY DATA SHEET

NAPCO CHEMICAL COMPANY, INC. Material Safety Data Sheet

Material Safety Data Sheet

Material Safety Data Sheet Weld Shield tm 1890 S-T & 3690 ST. Siltemp CH Silica. Section I Product Information

2602 FLORIDA PURPLE PEC

Crop Shade. Safety Data Sheet 1. IDENTIFICATION 2. HAZARDS IDENTIFICATION 3. COMPOSITION / INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES

POLY-TEMP SSG STAINLESS STEEL GRADE PTFE TAPE SAFETY DATA SHEET

ZINC ANTI-SEIZE Zinc Dust and Petrolatum Compound SAFETY DATA SHEET Section 1- Product and Company Identification

MATERIAL SAFETY DATA SHEET

1. PRODUCT AND COMPANY IDENTIFICATION

1. PRODUCT AND COMPANY IDENTIFICATION. : Product Stewardship (770)

*MATERIAL SAFETY DATA SHEET*

Resinoid Bonded Abrasives (08/12)

SAFETY DATA SHEET Non-woven Products SDS #8/9

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Page 1 of 7 Urinalysis Preservative Tube

1. PRODUCT AND COMPANY IDENTIFICATION. : Product Stewardship (770)

Section 1 - Chemical Product and Company Identification. Section 2 - Composition, Information on Ingredients

SAFETY DATA SHEET. 1. Product and Company Identification. Product Name : TILE GROUT INSTANT Product Code : 860N Recommended Use: Grout

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

Graphite Engineered Solutions

MATERIAL SAFETY DATA SHEET Nickel Titanium SECTION 5 FIRE FIGHTING PROCEDURES SECTION 6 ACCIDENTAL RELEASE MEASURES SECTION 7 HANDLING AND STORAGE

MATERIAL SAFETY DATA SHEET SYnL-1 November 3, 2005

Material Safety Data Sheet RUST VETO 4214-W

COPPER FLAKE Copper and Graphite Based Anti-Seize Compound Safety Data Sheet SECTION 1-PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET SYnH-1 November 3, 2005

1. PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON REGULATED INGREDIENTS. Components CAS-No. Weight % Titanium dioxide

1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING

MetriCide Powder Activator Date Prepared: 11/1/2012

Safety Data Sheet 1. PRODUCT IDENTIFICATION

SAFETY DATA SHEET Page 1 of 5

MATERIAL SAFETY DATA SHEET

STRONTIUM CARBONATE. 1. Product Identification. 2. Composition/Information on Ingredients. 3. Hazards Identification. 4. First Aid Measures

1. PRODUCT AND COMPANY IDENTIFICATION. : Product Stewardship (770)

PANTONE 365U

Palladium( ) ~100 NE* NE* No No No Palladium Powder*

Safety Data Sheet PTFE Coated Fiberglass Textiles (air dried)

Safety Data Sheet Rev. 5/2015

1. PRODUCT AND COMPANY IDENTIFICATION

EMERGENCY OVERVIEW Dust may cause eye and respiratory irritation. Dust particles may cause abrasive injury to the eyes.

MATERIAL SAFETY DATA SHEET

Gemtex Abrasives SAFETY DATA SHEET Coated Abrasives RFD; Mini RFD

TEAL PEARL (Q )

Material Safety Data Sheet

Safety Data Sheet. In Case of Emergency Call: CHEMTREC or (24 Hours/Day, 7 Days/Week)

MATERIAL SAFETY DATA SHEET. BORON NITRIDE WATER BASED PAINT Grades TPC and LPC

MATERIAL SAFETY DATA SHEET Beta Titanium SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

MATERIAL SAFETY DATA SHEET ABC Fire Extinguisher. SECTION 1 PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Powder Fire Extinguisher

Product Use: Abrasive materials used on metals, concrete, masonry and building materials.

GHS Pictograms: NA GHS Categories: NA. 2.2 Label elements Hazard Pictograms: NA Signal Word: NA Hazard Statements: NA Precautionary Statements: NA

1. PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON REGULATED INGREDIENTS

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET SECTION 1-PRODUCT AND COMPANY IDENTIFICATION

200CPEN PANTONE(R) 200 C SIMULATION

MATERIAL SAFETY DATA SHEET

Product Distributed by Rio Grande SDS access on web: Safety Data Sheet

Calcium Carbonate Powder

Calcium Carbonate Precipitated Lite Powder USP/FCC

Material Safety Data Sheet

Calcium Carbonate Precipitated Lite Powder USP/FCC

Material Safety Data Sheet Whisk Hand Cleaner 200. Page 1 Whisk Products, Inc. Revised: November 24, 2014

Material Safety Data Sheet

NO ,28Nong,Zhongjia Rd,Nanxiang,Jiading,Shanghai, Information Phone: (86) Emergency Phone: (86)

SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION

SAFETY DATA SHEET SECTION 1 - IDENTIFICATION SECTION 2 - HAZARDS IDENTIFICATION(S) Quality Magnetite, LLC June 1, 2015

Safety Data Sheet Hot Stix

SDS SDS Number: Page 1 of 5

Safety Data Sheet Maxsil Silica Textiles Cloth, Tape, Blanket, Rope, Tadpole Tape, Yarn and Tubing

10% Ultramarine Violet 5011

Material Safety Data Sheet. Calcium Hypochlorite Granular. NAPCO HTH, Cal Shock, Calcium oxychloride

1. PRODUCT AND COMPANY IDENTIFICATION

Safety Data Sheet SDS No. GB-1205

MetriCide Powder Activator Date Prepared: 7/14/2015

Haynes Silicone Grease. Haynes Manufacturing Co. Food-Grade Silicone Grease Compound Detroit Road Westlake, Ohio 44145, USA

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION. Revised on 03/31/2016 Page 1 of 5

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

Safety Data Sheet. (Magnesium Ascorbyl Phosphate) DATE PREPARED: 6/16/2016. Section 1. Product and Company Identification

MATERIAL SAFETY DATA SHEET

1. PRODUCT AND COMPANY IDENTIFICATION

SAFETY DATA SHEET Non-woven Products SDS #8/9

SAFETY DATA SHEET ID# MSDS-0100 Issue Date: June 1, 2015 Revised Date: Revision No.

1. PRODUCT AND COMPANY IDENTIFICATION. : Product Stewardship (770)

Safety Data Sheet Product No. 8075, 83, 88, 9555, Tantalum Products Issue Date (8-7-13) Review Date ( )

MATERIAL SAFETY DATA SHEET

Signal word, symbols, hazard and precautionary statements: Not applicable/void, due to non-hazardous classification.

VIPER INTERNATIONAL Ph (269) th Ave. Gobles, MI Material Safety Data Sheet VIPER S VENOM

Sodium Silicate, 42 Be'

TRISOTECH G ROOF INSULATION 1.0" Version 2. Print Date 10/16/2008 REVISION DATE: 10/15/2008

POTASSIUM BICARBONATE

Gold ( ) 70 ND ND No No No Toluene ( ) NE 100 ppm 100 ppm No No No Arcosolve PM ( ) NE 100 ppm 100 ppm No No No.

Detectable Tape. Material Safety Data Sheet - MSDS. Section 1. Chemical Product and Company Identification

MSDS Number: S6410 * * * * * Effective Date: 11/02/01 * * * * * Supercedes: 11/17/99 STANNIC OXIDE. 2. Composition/Information on Ingredients

Transcription:

PRODUCT AND COMPANY INFORMATION SECTION 1 Graphite Sales Inc. 16710 West Park Circle Drive Manufacturer/Distributor: Chagrin Falls, Ohio 44023 440-543-8221 Product Name: Synonyms: Graphite Intended Use: High Temperature Applications HAZARDS IDENTIFICATION SECTION 2 EMERGENCY OVERVIEW & HAZARDS PRESENT TO MAN AND THE ENVIRONMENT REGULATORY STATUS FOR CHEMICAL EMERGENCY, SPILL, LEAK, FIRE, EXPOSURE, OR ACCIDENT: In the continental U.S.: 440-543-8221 May be harmful if inhaled. May cause irritation to skin, eyes, and respiratory tract. Affects respiratory and cardiovascular systems. This material is classified as hazardous under OSHA Regulations. PRIMARY ROUTES OF In dust form, inhalation in the primary route of exposure. EXPOSURE POTENTIAL HEALTH EFFECTS: Eyes: In dust form, may be abrasive and irritating to eyes. Skin: In dust form, may cause mild irritation. Inhalation: If exposure limits are exceeded. The respiratory tract may become irritated. May cause shortness of breath. Coughing and/or chest tightness due to temporary physical overloading of the lungs. Ingestion: MEDICAL CONDITIONS AGGREVATED BY EXPOSURE: CHRONIC HEALTH EFFECTS: Eyes: Skin: Inhalation: Ingestion: May cause gastrointestinal disturbances. Persons with pre-existing respiratory impairments including, emphysema and asthma. In dust form, may be abrasive and irritating to the eyes through mechanical abrasion. In dust form, may be abrasive and irritating to the skin through mechanical abrasion. Prolonged or repeated inhalation of dust may cause pulmonary fibrosis or emphysema. Possible lung cancer hazard. May cause nausea, vomiting, and diarrhea. Page 1 of 7

COMPOSITION INFORMATION SECTION 3 Chemical Name: Percent: 100 CAS Number: 7782-42-5 FIRST AID MEASURES SECTION 4 Eyes: Skin: Inhalation: Ingestion: Instructions for Physician SEEK MEDICAL ATTENTION FOR ALL CASES OF OVEREXPOSURE. Flush thoroughly with water, taking special care to rinse under the eyelids. Do not rub the eye as mechanical abrasion due to the dust may be damaging to the cornea. If irritation persists, continue flushing for fifteen (15) minutes. If discomfort persists, seek consultation from a physician. Remove contaminated clothing. Wash irritated area thoroughly with water. Do not rub as mechanical abrasion due to the dust may prolong irritation to the skin. If overcome by dust concentrations, remove to a more ventilated area (fresh air). Due not induce vomiting. Seek consultation from a physician. None recommended. FIRE FIGHTING MEASURES SECTION 5 NFPA Classification Health Fire Reactivity Other 1 0 0 FLAMMABILITY PROPERTIES Flash Point: Method: Flammability Limits: (in air % by volume) LEL: UEL: Autoignition Temperature: Hazard Combustion Products: Products of combustion include carbon monoxide (CO), and carbon dioxide (CO2). Extinguishing Media: Use any means suitable for extinguishing surrounding fire, Prohibited Extinguishing Media: Avoid high-pressure water stream as this may spread burning powder (burning powder will float), Firefighting Instructions: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face-piece operated in the pressure demand or other positive pressure mode. Unusual Fire and Explosion Hazard: In dust form, this material is combustible at high temperatures. Dusts may form explosion mixtures in air. Material itself burns with difficulty. Page 2 of 7

ACCIDENTAL RELEASE MEASURES SECTION 6 Environmental Precautions: Spill and release of this material to navigable water in sufficient amounts that cause sludge or emission under the water must be reported immediately to the National Response Center (800/424-8802), as required by U.S. Federal Law. Contact the Coast Guard and appropriate state and local regulatory agencies. Failure to report these spills may result in substantial civil and criminal penalties. Cleanup Methods: Small spills: should be vacuumed when possible. Dry sweeping is not recommended. A vacuum equipped with HEPA (high efficiency particulate air) filtration is recommended. If necessary, light water spray will reduce dust for dry sweeping. Large Spills: may be shoveled into containers. Wear appropriate personal protective equipment and respiratory protection. HANDLING & STORAGE SECTION 7 Avoid handling that will unnecessarily generate airborne dust. Graphite is a good conductor of electricity. Exercise caution Handling: when handling in areas where contact with electrical circuitry is possible. Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers Storage: of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product. Specific Uses: Users should avoid inhalation of dust. EXPOSURE CONTROLS / PERSONAL PROTECTION SECTION 8 EXPOSURE CONTROLS: Exposure Limit Values OSHA PEL: Graphite (synthetic) 15 mg/m3 (Total Dust) 5 mg/m3 (Respirable Fraction) ACGIH TLV: 2 mg/m3 (for all forms of graphite except graphite fibers) Engineering Controls: A system of local and/or general exhaust is recommended to keep employees exposures below the Airborne Exposure Limits. Local exhaust is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. PERSONAL PROTECTIVE EQUIPMENT: Respiratory Protection: If exposure limits are exceeded or if irritation is experienced. NIOSH approved respiratory protection should be worn. Respiratory protection may be needed for non-routine or emergency situations. Page 3 of 7

Hand Protection: Appropriate chemical protective gloves should be used while handling this material. Eye/Face Protection: Avoid eye contact with this material. Wear safety glasses or chemical goggles. Provide and eyewash station in the work area. Do not wear contact lenses when working with this substance. Skin Protection: Wear impervious clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact. General Hygiene Considerations: Practice good industrial hygiene by washing with soap and water after each use. Avoid excessive inhalation. Other Protective Equipment: Depending upon conditions of use, additional protection may be necessary such as face shield, apron, arm-covers, ect. PHYSICAL & CHEMICAL PROPERTIES SECTION 9 PRODUCT: General Information: Appearance Odor Grey to black solid, may be in the form of dust. Odorless Important Health, Safety, and Environmental Information: Boiling Point Melting Point Flash Point Explosive Properties Oxidizing Properties Specific Gravity (H2O = 1) 2.19-2.26 Water Solubility Insoluble Partition Coefficient (n-octanol/water) Not Determined Viscosity Vapor Pressure (mm Hg) Vapor Density (Air = 1) Evaporation Rate % Volatile (By Volume @ 68º F) Zero Page 4 of 7

STABILTY & REACTIVITY SECTION 10 Stability: This material is stable under normal conditions. Conditions to Avoid: Incompatibilities with strong oxidizers. This condition is aggravated when the material is heated. Materials to Avoid: Graphite reacts vigorously with liquid potassium, potassium peroxide and will ignite with chlorine trifluoride and fluorine. If graphite contacts liquid potassium, rubidium, or caesium at 300C, intercalation compounds may be formed. These compounds may explode on contact with water or ignite in air. Hazardous Decomposition Products: Carbon monoxide, carbon dioxide. Hazardous Polymerization: Polymerization will not occur with this material. TOXICOLOGICAL INFORMATION SECTION 11 Type of Test Route of Exposure Effects No Information Available Species Observed Dose Data ECOLOGICAL INFORMATION SECTION 12 Ecotoxicity: No effects are expected from this material due its insolubility. Insolubility leads to nonbioavailability. Mobility:. Persistence and Degradability: Bioaccumulative Potential: DISPOSAL CONSIDERATION SECTION 13 Treatment, storage, transportation, and disposal must be in accordance with applicable Federal, State/Provincial, and Local regulations. Do not flush to surface water or sanitary sewer system. Page 5 of 7

TRANSPORT INFORMATION SECTION 14 DOT CLASSIFICATION: UN Number: This material is not regulated by DOT for transportation. Class: Proper Shipping Name: Packing Group: Marine Pollutant: Other Information: IATA CLASSIFICATION: UN Number: This material is not regulated by IATA for transportation. Class: Proper Shipping Name: Packing Group: Marine Pollutant: Other Information: IMDG CLASSIFICATION: UN Number: This material is not regulated by IMDG for transportation. Class: Proper Shipping Name: Packing Group: Marine Pollutant: Other Information: REGULATORY INFORMATION SECTION 15 US REGULATIONS: ACDIH 2 mg/m3 (TLV. All forms of graphite except graphite fibers) CAA Section 112 Not Listed CERCLA IARC NTP 15 mg/m3 (Total Dust) (PEL ) OSHA 5 mg/m3 (Respirable Fraction) (PEL Synthetic Graphite) SARA Title III TSCA STATE REGULATIONS: MA Substance List Listed as 2, 4 (Graphite, synthetic) NJRTK Hazardous Substance List Not Listed PA Hazardous Substance List Listed (Graphite) Canadian WHMIS Listed Page 6 of 7

OTHER INFORMATION SECTION 16 Revision Number Revision Date 5 05/23/12 To the best of our knowledge, the information contained herein is accurate. However, neither Graphite Sales Inc. nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist. Page 7 of 7