Fabricated Slide Gates

Fabricated Slide Gates

Pioneers in Gate Design Hydro Gate 6101 Dexter Street Commerce City, CO 80022 Your Source for Water Control Gates No matter what type of gates your project demands, chances are excellent Hydro Gate has the right gates for your specific application. Our product offering is vast and can suit applications for a wide variety of industries. Choose from cast iron slide or flap gates, fabricated slide or flap gates, rectangular butterfly gates, stop logs, wall thimbles, lifts and accessories. Industries We Serve Whether you need gates for flood control, wastewater treatment, environmental water treatment, irrigation, dam projects or hydroelectric plants, we can help. From standard configurations to custom designs, Hydro Gate offers a wide variety of water control gates as well as a full complement of actuators to meet your specific application. Service Well Beyond Shipment Our services extend beyond manufacturing. Hydro Gate s experienced field service technicians can help you with repair and refurbishment projects. If you have existing, yet serviceable gates, we can perform a retrofit that will extend their life and durability. With more than 100 years of experience in gate design, Hydro Gate has built a long-standing reputation of providing superior quality water control gates for a variety of industries. Our manufacturing expertise revolves around making big, heavy-duty gates that are 100% custom-built to match specific applications. Focus on Quality Hydro Gates expansive 90,000 square foot manufacturing facility utilizes precision equipment that allows us to merge time-tested gate design with cutting edge technology. We offer large scale manufacturing capabilities with the ability to produce cast iron gates up to 14' x 16' in size, and fabricated gates up to and over 20' in width or height. Commitment to You Our Customer At Hydro Gate, customer satisfaction is our top priority. Bring your special requirements to our engineers who have years of experience in gate design. Our dedicated customer service staff is accustomed to custom requests, because that is what we do best. From your first contact through final delivery, our team of engineers and service experts are here to make sure you have the right gates to suit your needs.

Fabricated Slide Gates Hydro Gate Table of Contents Fabricated Slide Gates: Applications...2 Description...2 Materials...2-3 Mounting...3-5 Dimensional Data...6-9 Aluminum Hand-Pull Gates: Overview...10 Weir Gates: Overview...11 Dimensional Data...11-12 Specifications: Aluminum Slide Gates...13 Stainless Slide Gates...14 Carbon Steel Slide Gates...14 Heavy Duty Fabricated Slide Gate: Applications...15 Description...15 Dimensional Drawings...16-18 Specifications...19-20 F A B R I C A T E D S L I D E G A T E S 1

Fabricated Slide Gates Description Hydro Gate fabricated slide gates are designed and fabricated from special shaped extrusions or structural angles, flats, and plates are assembled by welds and bolts. Through years of fabricating experience, Hydro Gate has developed techniques for fabricating parts to a close tolerance and straightness. Since there are no machined parts or wedging devices in the gate itself, the gate depends upon water pressure and seal design to seat the fabricated slide. Fabricated slide gates are usually furnished with rubber seals to improve water-tightness. They are designed for either open channel use or aperture type applications. Open channel gates have no frame member or seal at the top of the slide. These gates will overflow. Aperture gates (over an opening) have top frame member and seals to shut off flow at depths greater than the slide height. A more economical fabricated gate is available without rubber seals for flow diversion. It is not as water tight and relies on head pressure and presence of silt and fine particles to reduce leakage by plugging. Head capacity is dependent on opening size and availability of structural members. The most common head rating is 10 ft seating and unseating, with 20 ft seating being a practical limit for most sizes. Higher heads require special designs. Consult the Hydro Gate s Engineering Department for additional information. Fabricated Slide Gates Applications Flood Control Irrigation Projects Low-Head Reservoirs Drainage Systems Soil Conservation Projects Water Treatment Plants Sewer Treatment Plant Materials Hydro Gate fabricated slide gates are available in four different material combinations. Material Combination 1: Carbon Steel These steel gates can be grit blast cleaned and painted to your specifications. Material Combination 2: Galvanized Carbon Steel Available for those installations where a very economical gate is needed but painting does not provide adequate protection. Both of these material combinations use hot-rolled angles and flats for gate construction. Material Combination 3: Stainless Steel This material is recommended when corrosive conditions make it necessary to add protection. These Hydro Gate fabricated slide gates are made from Type 304, 304L or 316 stainless steel. Gates manufactured from these materials are more corrosion resistant under most conditions than slide gates manufactured from other materials. 2 F A B R I C A T E D S L I D E G A T E S

Material Combination 4: Aluminum Various extrusions are utilized with this design. Frame sides are manufactured from an extrusion that forms the guide slot and provides flange back mounting. This special extrusion also can be used for gates fully embedded in concrete channels. An alternate extrusion is used for hand-pull gate frames. CAUTION: Since these fabricated slide gates do not have machined faces or wedging devices, they cannot be expected to be as watertight as cast iron slide gates. If low leakage characteristics are desired, wedge-type gates (Hydro Gate heavy duty cast iron slide gates or heavy-duty fabricated gates) are recommended. Mounting Aluminum Fabricated Slide Gate UHMW Liner and J Seal Assembly Figure 3-3 Flange Back Material Combinations 1, 2 and 3 (Surface Mounting) F A B R I C A T E D S L I D E G A T E S 3

Mounting, continued TOP SECTION Figure 3-4 Flange Back Material Combination 4 (Surface Mounting) 4 F A B R I C A T E D S L I D E G A T E S

Mounting, continued TYPICAL SIDE SECTION Figure 3-5 Embedded Frame Material Combinations 1, 2 and 3 (Embedded Mounting) Figure 3-6 Embedded Frame Material Combination 4 (Embedded Mounting) F A B R I C A T E D S L I D E G A T E S 5

Dimensional Data Figure 3-1 Fabricated Slide Gates Not Self-Contained 6 F A B R I C A T E D S L I D E G A T E S

Fabricated Slide Gates Not Self-Contained Width Carbon Steel & Stainless All Recommended X Galvanized Steel Aluminum Materials Stem Lift H Height (A) (B) (A) (B) (A) (B) (C) Dia. Model Dia. Distance 12 x 12 20.00 10.00 20.00 10.00 21.00 10.00 20 1.25 H-1B 10 30 12 x 24 20.00 16.00 20.00 16.00 21.00 16.00 38 1.25 H-1B 10 48 18 x 18 26.00 13.00 26.00 13.00 27.00 13.00 29 1.25 H-1B 10 39 18 x 24 26.00 16.00 26.00 16.00 27.00 16.00 38 1.25 H-1B 10 48 18 x 30 26.00 19.00 26.00 19.00 27.00 19.00 47 1.25 H-1B 10 57 24 x 18 32.00 13.00 32.00 13.00 33.00 13.00 29 1.25 H-1B 10 39 24 x 24 32.00 16.00 33.50 16.00 33.00 16.00 38 1.25 H-1B 14 48 24 x 30 32.00 19.00 32.00 19.00 33.00 19.00 47 1.25 H-1B 14 57 24 x 36 32.00 22.00 32.00 22.00 33.00 22.00 56 1.25 H-2B 24 66 24 x 48 32.00 28.00 32.00 28.00 33.00 28.00 74 1.50 H-2B 30 84 30 x 24 38.00 16.00 38.00 16.00 39.00 16.00 38 1.25 H-2B 24 48 30 x 30 38.00 19.00 38.00 19.00 39.00 19.00 47 1.25 H-2B 24 57 30 x 36 38.00 22.00 38.00 22.00 39.00 22.00 56 1.25 H-2B 24 66 30 x 42 38.00 25.00 38.00 25.00 39.00 25.00 65 1.50 HPB 24 75 30 x 48 38.00 28.00 38.00 29.00 39.00 28.00 74 1.50 H-2B 24 84 36 x 24 44.00 16.00 44.00 16.00 45.00 16.00 38 1.25 H-2B 24 48 36 x 30 44.00 19.00 44.00 19.00 45.00 19.00 47 1.25 H-2B 24 57 36 x 36 44.00 22.00 44.00 22.00 45.00 22.00 56 1.25 H-2B 24 66 36 x 42 44.00 25.00 44.00 25.00 45.00 25.00 65 1.50 H-2B 24 75 36 x 48 44.00 28.00 44.00 29.00 45.00 28.00 74 1.50 H-2B 30 84 36 x 60 44.00 34.00 44.00 35.00 45.00 34.00 92 2.00 CPS 102 42 x 30 50.00 19.00 50.00 19.00 51.00 19.00 47 1.25 H-2B 24 57 42 x 36 50.00 22.00 50.00 22.00 51.00 22.00 56 1.25 H-2B 24 66 42 x 42 50.00 25.00 50.00 25.00 51.00 25.00 65 1.50 H-2B 30 75 42 x 48 50.00 28.00 50.00 28.00 51.00 28.00 74 1.50 H-2B 30 84 42 x 60 50.00 34.00 50.00 34.00 51.00 34.00 92 2.00 CPS 102 48 x 30 56.00 19.00 56.00 19.00 57.00 19.00 47 1.25 H-2B 24 57 48 x 36 56.00 22.00 56.00 22.00 57.00 22.00 56 1.25 H-2B 30 66 48 x 42 56.00 25.00 56.00 25.00 57.00 25.00 65 1.50 H-2B 30 75 48 x 48 56.00 28.00 56.00 28.00 57.00 28.00 74 1.50 CPS 84 48 x 60 56.00 34.00 56.00 34.00 57.00 34.00 92 2.00 CPS 102 48 x 72 56.00 40.00 56.00 40.00 57.00 40.00 110 2.00 CPS 120 54 x 54 62.00 31.00 62.00 31.00 63.00 31.00 83 1.50 CPS 93 60 x 36 68.00 22.00 68.00 22.00 69.00 22.00 56 1.50 CPS 66 60 x 42 68.00 25.00 68.00 25.00 69.00 25.00 65 1.50 CPS 75 60 x 48 68.00 28.00 68.00 28.00 69.00 28.00 74 1.50 CPS 84 60 x 60 68.00 34.00 68.00 34.00 69.00 34.00 92 2.00 CPS 102 60 x 72 68.00 40.00 68.00 40.00 69.00 40.00 110 2.00 CPS 120 72 x 42 80.00 25.00 80.00 25.00 81.00 25.00 65 1.50 CPS 75 72 x 48 80.00 28.00 80.00 28.00 81.00 28.00 74 1.50 CPS 84 72 x 60 80.00 34.00 80.00 34.00 81.00 34.00 92 2.00 CPS 102 72 x 72 80.00 40.00 80.00 40.00 81.00 40.00 110 2.00 CPS 120 NOTE: All measurements are in inches. A = Width C = Centerline to top of gate in full open B = Centerline to bottom of gate flange C = position H = Centerline to top of concrete F A B R I C A T E D S L I D E G A T E S 7

Figure 3-2 Fabricated Slide Gates Self-Contained 8 F A B R I C A T E D S L I D E G A T E S

Fabricated Slide Gates Self-Contained Width Carbon Steel & Stainless Recommended Minimum X Galvanized Steel Aluminum Stem Lift Frame Height (A) (B) (A) (B) (A) (B) Dia. Model Dia. Height 12 x 12 20.00 10.00 20.00 10.00 21.00 9.50 1.25 H-1B 10 36 12 x 24 20.00 16.00 20.00 16.00 21.00 15.50 1.25 H-1B 10 42 18 x 18 26.00 13.00 26.00 13.00 27.00 12.50 1.25 H-1B 10 36 18 x 24 26.00 16.00 26.00 16.00 27.00 15.50 1.25 H-1B 10 42 18 x 30 26.00 19.00 26.00 19.00 27.00 18.50 1.25 H-1B 10 54 24 x 18 32.00 13.00 32.00 13.00 33.00 12.50 1.25 H-1B 10 36 24 x 24 32.00 16.00 33.50 16.00 33.00 15.50 1.25 H-1B 10 42 24 x 30 32.00 19.00 32.00 19.00 33.00 18.50 1.25 H-1B 10 54 24 x 36 32.00 22.00 32.00 22.00 33.00 21.50 1.25 H-1B 10 60 24 x 48 32.00 28.00 32.00 28.00 33.00 27.50 1.50 H-2B 18 72 30 x 24 38.00 16.00 38.00 16.00 39.00 15.50 1.25 H-1B 10 42 30 x 30 38.00 19.00 38.00 19.00 39.00 18.50 1.25 H-1B 10 54 30 x 36 38.00 22.00 38.00 22.00 39.00 21.50 1.25 H-1B 10 60 30 x 42 38.00 25.00 38.00 25.00 39.00 24.50 1.50 H-2B 18 72 30 x 48 38.00 28.00 38.00 29.00 39.00 27.50 1.50 H-2B 18 78 36 x 24 44.00 16.00 44.00 16.00 45.00 15.50 1.25 H-1B 10 42 36 x 30 44.00 19.00 44.00 19.00 45.00 18.50 1.25 H-1B 14 54 36 x 36 44.00 22.00 44.00 22.00 45.00 21.50 1.25 H-1B 24 60 36 x 42 44.00 25.00 44.00 25.00 45.00 24.50 1.50 H-2B 18 72 36 x 48 44.00 28.00 44.00 29.00 45.00 27.50 1.50 H-2B 18 78 36 x 60 44.00 34.00 44.00 35.00 45.00 33.50 2.00 H-2B 24 96 42 x 30 50.00 19.00 50.00 19.00 51.00 18.50 1.25 H-1B 10 54 42 x 36 50.00 22.00 50.00 22.00 51.00 21.50 1.25 H-2B 18 60 42 x 42 50.00 25.00 50.00 25.00 51.00 24.50 1.50 H-2B 24 72 42 x 48 50.00 28.00 50.00 28.00 51.00 27.50 1.50 H-2B 24 78 42 x 60 50.00 34.00 50.00 34.00 51.00 33.50 2.00 H-2B 24 96 48 x 30 56.00 19.00 56.00 19.00 57.00 18.50 1.25 H-1B 14 54 48 x 36 56.00 22.00 56.00 22.00 57.00 21.50 1.25 H-2B 18 60 48 x 42 56.00 25.00 56.00 25.00 57.00 24.50 1.50 H-2B 24 72 48 x 48 56.00 28.00 56.00 28.00 57.00 27.50 1.50 H-2B 30 78 48 x 60 56.00 34.00 56.00 34.00 57.00 33.50 2.00 CPS-2 30 96 48 x 72 56.00 40.00 56.00 40.00 57.00 39.50 2.00 CPS-2 114 54 x 54 62.00 31.00 62.00 31.00 63.00 30.50 1.50 H-2B 24 90 60 x 36 68.00 22.00 68.00 22.00 69.00 21.50 1.50 H-2B 30 60 60 x 42 68.00 25.00 68.00 25.00 69.00 24.50 1.50 H-2B 30 72 60 x 48 68.00 28.00 68.00 28.00 69.00 27.50 1.50 H-2B 24 78 60 x 60 68.00 34.00 68.00 34.00 69.00 33.50 2.00 CPS-2 96 60 x 72 68.00 40.00 68.00 40.00 69.00 39.50 2.00 CPS-2 114 72 x 42 80.00 25.00 80.00 25.00 81.00 24.50 1.50 H-2B 24 72 72 x 48 80.00 28.00 80.00 28.00 81.00 27.50 1.50 H-2B 30 78 72 x 60 80.00 34.00 80.00 34.00 81.00 33.50 2.00 CPS-2 96 72 x 72 80.00 40.00 80.00 40.00 81.00 39.50 2.00 CPS-2 114 NOTE: All measurements are in inches. A = Width B = Centerline to bottom of gate flange H = Frame Height F A B R I C A T E D S L I D E G A T E S 9

Aluminum Hand-Pull Gates Hydro Gate manufactures several standard sizes of hand-pull or stop gates. An extruded metal section embeds in the side walls or is mounted on the face of the rectangular flume or conduit and acts as a guide for the gate slide. The gate consists of an aluminum plate reinforced if necessary with handholes for manual opening of the gate. A hand-pull gate is an economical way to divert water in rectangular channels. Material Specification The side guides, slide plate and any necessary reinforcing for Hydro Gate hand-pull gates are manufactured from aluminum meeting the requirements of ATMS Specification B209 Alloy or B308 Alloy 6061. Figure 3-7 Embedded and Surface Mounted Frames 10 F A B R I C A T E D S L I D E G A T E S

Weir Gates Many treatment plants require downward-opening fabricated gates to permit a rough measurement of flow or to maintain a constant upstream water elevation. For these installations the gate slide is moved down to allow the flow of water over the top of the slide or weir plate. Sufficient room must be left on the gate side of the wall to permit the slide to travel downward for its maximum specified opening. Every effort should be made to mount the gate so it will be subjected to seating head. When a watertight shutoff is required, rubber seals should be specified. If the gate must be mounted in an unseating position, seals are required along the sides and across the bottom of the gate. Weir gates mounted with unseating pressure, particularly wide gates, are subject to greater leakage because water pressure tends to deflect the slide away from the seals. Most weir gates are required to be considerably wider than they are high. Gates up to 20 ft in width are not uncommon. Such a gate may be only 24 to 30 in. high. Tandem lifts and stems must be utilized to ensure alignment of the slide as it is raised or lowered. As a general rule, when the width is greater than twice the height and the width is greater than 60 in., a tandem stem arrangement should be used. Either manual or electrically actuated lifting devices may be utilized. Weir gates may be self-contained or not self-contained. Weir gates are available in Material Combinations 1, 2, 3 and 4. If additional information on gate size, lift selection, etc., is needed, contact your local Hydro Gate sales representative. Dimensional Data Figure 3-8 Weir Gate Material Combinations 1, 2 and 3 Figure 3-9 Weir Gate Material Combinations 4 F A B R I C A T E D S L I D E G A T E S 11

Figure 3-10 Weir Gate Downward Opening (Self-Contained) 12 F A B R I C A T E D S L I D E G A T E S

Specifications for Aluminum Slide Gates General Slide and weir gates including lifts, stems and accessories, shall be of the size and type shown on the drawings and specified herein. Where possible, gates shall be installed so that there is a seating head on the gate. Gate type, lift type, frame type, size, seating head, and bottom closure type are indicated in the Gate Schedule. Gate, frame, and yoke design shall be such that the flexural stress does not exceed 8,400 psi or that the minimum safety factor is 5-to-1 based on the ultimate strength of the material used. Manufacturers Hydro Gate or approved equal. Materials of Construction Frame, Slide, and Reinforcing Aluminum, ASTM B209, Alloy 6061, or ASTM B308, Alloy 6061 Stems Stainless steel, ASTM A276, Type 304 Fasteners Stainless steel, ASTM F593/F594, Alloy Group 1 Anchors Stainless steel, ASTM F593/F594, Alloy Group 1 Rubber Seals Neoprene, ASTM D2000, Grade 1BE625 Guides Ultra High Molecular Weight (UHMW) Polymer, ASTM D4040 GATE CONSTRUCTION Frame Gate frame shall be flat back or channel mount as shown in the Gate Schedule. Spigot-back frames are not acceptable. The frame shall be an integral unit of extrusions and structural shapes, rigidly assembled to form the waterway openings. Holes shall be provided for mounting on anchor bolts. The head channels shall be welded to the gate frame. The head channels are to be sufficiently spaced to allow removal of the gate slide. The primary slot of the frame extrusion shall contain polymer guide liner retained in grooves, to prevent metal-tometal contact between slide and frame. Slide Gate slide shall conform to the safety factors stated under General, but shall, in no case, be less than 1/4-in. thickness. Deflection under full head shall be limited to 1/360 of the span. The stem connector clips or stem block pocket shall be welded to the slide. Flush Bottom Slide gates shall incorporate a flush-bottom seal that is attached to the bottom frame invert member. The seal shall be of the materials shown in Materials of Construction. Seals attached to the slide are not acceptable. Seals J-seals shall be provided as specified in the Gate Schedule. Seals shall be securely fastened to the frame with formed stainless steel retainers and shall be replaceable and adjustable without removing the gate from the installed position. The corners of the J-seals shall be vulcanized. Stems Gate stem diameter shall be adequate to withstand twice the force created by a 40-lb pull on the handwheel or crank. Stems shall have rolled threads with a maximum roughness of 16 micro-inches. Cut threads are not acceptable. The stem shall be supported by angle guides or cast iron stem guides with a 2- piece cast bronze guide collar, spaced to provide an l/r ratio of 200 or less. Stems shall withstand 1.25 times the stalled motor thrust of the actuator. Manual Lifts Gate lifts shall be handwheel or geared crank type as shown in the Gate Schedule. Lifts shall operate the gate with a maximum pull of 40 lb on the handwheel or crank. Handwheel or crank shall be located approximately 36 in. above grating or walkway. All lifts shall have thrust bearings, bronze lift nuts, and a bronze stop nut to limit the downward travel of the stem and slide. All geared lifts shall have cast iron or steel housings and pedestals. Aluminum housings and pedestals are not acceptable. All lifts shall be rising stem type. Stem covers made of clear butyrate shall be furnished for all lifts. Lifts shall be grease lubricated and regreasable through grease zerks. Oil bath lifts are not acceptable. Motor-Operated Lift Motor actuator shall be a 460-V, 3-phase, 60-Hz motor with precision reduction gearing enclosed in a weatherproof housing. The actuator shall be designed to raise the gate at a rate of approximately 12 in./min. Integral controls shall include a control power transformer, reversing controller, torque switches, limit switches, space heater to prevent condensation, open-stop-closed push-buttons, and gate position indicator. Where applicable, the controls shall also include a local-off remote selector switch. Motor reduction helical gear and pinion shall be of heat-treated alloy steel. Final reduction worm shall be of alloy steel and worm gear of machined, hightensile strength bronze. All gearing shall be proportioned for 100% overload condition. Actuator shall have a declutch lever and handwheel for manual operation. F A B R I C A T E D S L I D E G A T E S 13

Specifications For Stainless Steel and Carbon Steel Slide Gates General Slide and weir gates, including lifts, stems and accessories, shall be of the size and type shown on the manufacturer s drawings and specified herein. Where possible, gates shall be installed so that there is a seating head on the gate. Gate type, lift type, frame type, size, seating head, and bottom-closure type are indicated in the Gate Schedule. Gate, frame and yoke design shall be such that the flexural stress does not exceed 15,000 psi for stainless steel, 11,600 psi for carbon steel, or that the minimum safety factor is 5-to-1 based on the ultimate strength of the material used. Manufacturers Hydro Gate or approved equal. Materials of Construction Frame, Slide and Reinforcing Stainless steel, ASTM A276, Type 304 Carbon steel, ASTM A36 Stems Stainless steel ASTM A276, Type 304 Fasteners Stainless steel, ASTM F593/F594, Alloy Group 1 Anchors Stainless steel, ASTM F593/F594, Alloy Group 1 Rubber Seals Neoprene, ASTM D2000, Grade 1BE625 Guides Ultra High Molecular Weight (UHMW) Polymer, ASTM D4020 GATE CONSTRUCTION Frame Gate frame shall be flat back or channel mount as shown in the Gate Schedule. Spigot-back frames are not acceptable. The frame shall be an integral unit of structural shapes, rigidly assembled to form the waterway opening. The frame members shall form guides for the slide, and holes shall be provided for mounting on anchor bolts. The head channels shall be welded to the gate frame. The head channels are to be sufficiently spaced to allow removal of the gate slide. The primary slot of the frame shall contain polymer guide bars to prevent metalto-metal contact between slide and frame. Slide Gate slide shall conform to the safety factors stated under General but shall, in no case, be less than 1/4 in. thickness. Deflection under full head shall be limited to 1/360 of the span. The stem connector clips or stem block pocket shall be welded to the slide. Flush-Bottom Seals Slide gates shall incorporate a flush-bottom seal that is attached to the bottom frame invert member. The seal shall be of the materials shown in Materials of Construction. Seals attached to the slide are not acceptable. Seals J-seals shall be provided as specified in the Gate Schedule. Seals shall be securely fastened to the frame with formed stainless steel retainers and shall be replaceable and adjustable without removing the gate from the installed position. The corners of the J-seals shall be vulcanized. Stems Gate stem diameter shall be adequate to withstand twice the force created by a 40-lb pull on the handwheel or crank. Stems shall have rolled threads with a maximum roughness of 16 micro-inches. Cut threads are not acceptable. The stem shall be supported by angle guides or cast iron with a 2-piece cast bronze guide collar, spaced to provide an 1/r ratio of 200 or less. Stems shall withstand 1.25 times the stalled motor thrust of the actuator. Manual Lifts Gate lifts shall be handwheel or geared crank type as shown in the Gate Schedule. Lifts shall operate the gate with a maximum pull of 40 lb on the handwheel or crank. Handwheel or crank shall be located approximately 36 in. above grating or walkway. All lifts shall have thrust bearings, bronze lift nuts and a bronze stop nut to limit the downward travel of the stem and slide. All geared lifts shall have cast iron housings and pedestals. Aluminum housings and pedestals shall not be acceptable. All lifts shall be rising stem type. Stem covers made of clear butyrate shall be furnished for all lifts. Lifts shall be grease lubricated and regreasable through grease zerks. Oil bath lifts are not acceptable. Motor-Operated Lift Motor actuator shall be a 460-V, 3-phase, 60-Hz motor with precision reduction gearing enclosed in weatherproof housing. The actuator shall be designed to raise the gate at a rate of approximately 12 in./min. Integral controls shall include a control power transformer, reversing controller, torque switches, limit switches, space heater to prevent condensation, open-stop-closed push-buttons and gate position indicator. Where applicable, the controls shall also include a local-offremote selector switch. Motor reduction helical gear and pinion shall be of heat-treated alloy steel. Final reduction worm shall be of alloy steel and worm gear of machined hightensile strength bronze. All gearing shall be proportioned for 100% overload condition. Actuator shall have a declutch lever and handwheel for manual operation. 14 F A B R I C A T E D S L I D E G A T E S

Heavy Duty Fabricated Slide Gate Description The Heavy Duty Fabricated Stainless Steel Slide Gate is an exceptional design for low leakage requirements in corrosive environments. The frame, slide, stem and fasteners are all stainless steel type 304 and 316 dependent on your application. The side guide seal assembly utilizes an ultra high molecular weight polymer molded and milled to positively retain the slide and form a watertight seal. The polymer provides a selflubricating surface with a very low co-efficient of friction, ensuring smooth operation. The guide seal assembly is designed for positive retention allowing the compression force applied to the slide to be completely adjustable. All Hydro Gate seals are factory adjusted and after years of service the design provides the ability to readjust the compression force applied to the slide ensuring years of reliable service. A top wedge system is utilized on gates 24 inches and wider. The Hydro Gate wedge system incorporates a similar design used on cast iron slide gates. Each wedge is securely fastened to the top of the slide, which when in the closed position provides a contact with the top seal of the frame. Both flush bottom and standard bottom closures are available with this model. The flush bottom design features a neoprene seal attached to the frames eliminating the need for a recessed floor. The standard bottom incorporates the same design as the top wedge system. Fabricated Slide Gates Applications Water Treatment Plants Wastewater Treatment Plants Low-head Reservoirs Power Plants Top wedge system F A B R I C A T E D S L I D E G A T E S 15

Dimensional Drawings 16 F A B R I C A T E D S L I D E G A T E S

Fabricated Heavy Duty Stainless Steel Slide Gate Dimensions Gate Size W X H A B C 6 x 6 16.5 7.75 7 12 x 12 22.5 10.75 14 12 x 24 22.5 16.75 14 18 x 18 28.5 13.75 21 18 x 24 28.5 16.75 21 18 x 30 28.5 19.75 21 21 x 21 31.5 15.25 24.5 24 x 24 34.5 16.75 28 24 x 30 34.5 19.75 35 24 x 36 34.5 22.75 42 24 x 48 34.5 28.75 56 30 x 24 40.5 16.75 28 30 x 30 40.5 19.75 35 30 x 36 40.5 22.75 42 30 x 42 40.5 25.75 49 30 x 48 40.5 28.75 56 36 x 30 40.5 19.75 35 36 x 36 46.5 22.75 42 36 x 42 46.5 25.75 49 36 x 48 46.5 28.75 56 36 x 60 46.5 34.75 70 42 x 30 52.5 19.75 35 42 x 36 52.5 22.75 42 42 x 42 52.5 25.75 49 42 x 48 52.5 28.75 56 42 x 60 52.5 34.75 70 48 x 30 58.5 19.75 35 48 x 36 58.5 22.75 42 48 x 42 58.5 25.75 49 48 x 48 58.5 28.75 56 48 x 60 58.5 34.75 70 48 x 72 58.5 40.75 83.5 54 x 54 64.5 31.75 63 60 x 36 70.5 22.75 42 60 x 42 70.5 25.75 49 60 x 48 70.5 28.75 56 60 x 60 70.5 34.75 70 60 x 72 70.5 40.75 83.5 72 x 42 82.5 25.75 49 72 x 48 82.5 28.75 56 72 x 60 82.5 34.75 70 72 x 72 82.5 40.75 83.5 SIZE AND QUANTITY OF REINFORCEMENTS SELECTED TO LIMIT STRESS AND DEFLECTION F A B R I C A T E D S L I D E G A T E S 17

Self Contained Fabricated Heavy Duty Stainless Steel Slide Gate Dimensions Minimum Gate Size Frame W X H A B Height 6 x 6 16.5 7.75 12 12 x 12 22.5 10.75 36 12 x 24 22.5 16.75 42 18 x 18 28.5 13.75 36 18 x 24 28.5 16.75 42 18 x 30 28.5 19.75 54 21 x 21 31.5 15.25 30 24 x 24 34.5 16.75 42 24 x 30 34.5 19.75 54 24 x 36 34.5 22.75 60 24 x 48 34.5 28.75 72 30 x 24 40.5 16.75 42 30 x 30 40.5 19.75 54 30 x 36 40.5 22.75 60 30 x 42 40.5 25.75 72 30 x 48 40.5 28.75 78 36 x 24 46.5 16.75 42 36 x 30 46.5 19.75 54 36 x 36 46.5 22.75 60 36 x 42 46.5 25.75 72 36 x 48 46.5 28.75 78 36 x 60 46.5 34.75 96 42 x 30 52.5 19.75 54 42 x 36 52.5 22.75 60 42 x 42 52.5 25.75 72 42 x 48 52.5 28.75 78 42 x 60 52.5 34.75 96 48 x 30 58.5 19.75 54 48 x 36 58.5 22.75 60 48 x 42 58.5 25.75 72 48 x 48 58.5 28.75 78 48 x 60 58.5 34.75 96 48 x 72 58.5 40.75 114 54 x 54 64.5 31.75 90 60 x 36 70.5 22.75 60 60 x 42 70.5 25.75 72 60 x 48 70.5 28.75 78 60 x 60 70.5 34.75 96 60 x 72 70.5 40.75 114 72 x 42 82.5 25.75 72 72 x 48 82.5 28.75 78 72 x 60 82.5 34.75 96 72 x 72 82.5 40.75 114 SIZE AND QUANTITY OF REINFORCEMENTS SELECTED TO LIMIT STRESS AND DEFLECTION 18 F A B R I C A T E D S L I D E G A T E S

Specifications for Heavy Duty Fabricated Stainless Steel Gate Manufacturer Hydro Gate or approved equal. General Fabricated stainless steel heavy duty service gates shall be fabricated from formed stainless steel plate and structural shapes. The size, quantity, gate configuration and operating conditions shall be as listed on the gate schedule. Design stress shall be the lesser of 1/5 of ultimate tensile and shear or 3/4 of tensile yield strength. Maximum allowable deflection under rated load or head is 1/720th of span. Manufacturer shall have proof of design test records in accordance with AWWA C513 on file available for submittal. The gates shall be as manufactured by Hydro Gate Corp. or approved equal. Manufacturer shall be experienced and in regular production of gates and water control equipment. Welders and procedures shall be certified according to AWS D1.6 or ASME Section IX. The gate shall be fully shop assembled, adjusted, inspected and tested for operation and leakage before shipment. Materials Materials used in construction of gates shall be of type best suited for the application and shall conform to the following ASTM specifications: Frame and Slide Stainless Steel, ASTM A276, Type 304 or 316 specify on gate schedule. Fasteners and Anchor Bolts Stainless Steel, ASTM F593/F594 alloy group 1 (304) Stainless Steel, ASTM F594/F594 alloy group 2 (316) specify on gate schedule Guides, Liner and Seals UHMW PE (Ultra high molecular weight polymer) Flush Bottom Seal/Loading Pads Neoprene Rubber, ASTM D2000 grade 1BE625 GATE CONSTRUCTION Slide The slide shall be a weldment of plate with integrally formed reinforcements at top and bottom with welded-on interior reinforcements. The slide shall have at least one vertical reinforcement on or adjacent to the vertical center line. All edges and corners shall be radiused and polished for smooth operation within the guide seal assembly. Provision shall be provided for attaching stems to the gate with a clevis-type connection. Alternatively: stem block connection shall be used when precise adjustment of hydraulic cylinders is required. Frame The frame shall be of flange type design for mounting on anchor bolts and grout pad. Size and spacing of anchor bolt holes shall be suitable for the operating conditions of the gate. Spacing shall not exceed 12". The frame shall be of self-contained or not self-contained design as listed in the gate schedule. The frame shall be sufficiently rigid to transfer hydrostatic loads to the gate anchorage. The frame shall positively retain the polymer guide/seal strip and the neoprene loading pad on studs welded to it. Nonloosening (prevailing torque) fasteners shall be used on the gate guide assembly. The guide seal assembly shall be field adjustable and replaceable. The length (vertical height) of the guide shall retain at least 2/3 of the slide height in the full open position. Guide/Seal Assembly Guide seal shall be special milled or molded polymer to positively retain the slide and form a tight seal on face plate edge. Sealing shall be accomplished by the pinching action of the polymer guide/seal on the elastometer loading pad and the fastener cover bar system. Engagement of slide into guide groove shall be 7/8" nominal. Top Seal and Bottom Seal (if standard bottom) The top and bottom (if used) seal shall be specially milled or molded shape securely attached to the frame. It shall have an elastomer loading pad to ensure contact with the slide plate. Corners or intersections of seals and loading pads shall be interlocked and sealed for leak-proof joint. Flush Bottom Closure Rectangular solid bulb section neoprene seal shall be attached to frame horizontal member. Sealing action shall be against lower edge of slide plate. The sealing face of neoprene seal shall form a chased invert. F A B R I C A T E D S L I D E G A T E S 19

Standard Bottom Closure When specified by gate schedule, the gate shall be furnished with the special shaped polymer seal and loading pad on the gate frame lower member. The bottom edge of slide shall have integrally formed reinforcement and have gently ramped lead in surface to prevent damage to the seal. Wedges Gates 24" wide and wider shall have adjustable wedges across top of opening and across bottom of opening on standard bottom gate. Wedges may be fabricated or cast and shall be held onto slide reinforcing member with two inline welded studs with backing plate. Yoke The yoke or head frame may be welded or bolted to frame extensions. The slide shall be removable through the yoke opening or by disassembly/removal of the yoke. Yoke shall be sufficiently strong to prevent deflection greater than 1/4" under load. Stems Gate stem diameter shall be adequate to withstand twice the force created by a 40 lb. pull on the handwheel or crank. Stems shall have rolled threads with a maximum roughness of 16 micro inches. Cut threads are not acceptable. The stem shall be supported by angle guides or fabricated stainless steel, bronze split type stem guides, spaced to provide an 1/r ratio of 200 or less. Stems shall withstand 1.25 times the stalled motor thrust of the actuator. Wall Thimbles When thimbles are used, they shall be fabricated stainless steel with minimum thickness of 1/4". The flange shall be flat and plane within 3/16" without machining. Welded studs or threaded holes for screwed in studs shall be provided to match the gate layout. The top of the thimble flange shall be permanently marked top. The thimble shall be set plumb and flat within 1/8" of true plane and plumb. The gate shall be mounted with hard setting mastic or polyurethane closed cell foam gasket of no more than 1/2" uncompressed thickness. Refer to the gate schedule for type and application of wall thimbles. Manual Lifts Gate lifts shall be handwheel or geared crank type as shown in the gate schedule. Lifts shall operate the gate with a maximum pull of 40 lb. on the handwheel or crank. Handwheel or crank shall be located approximately 36" above grating or walkway. All lifts shall have thrust bearings, bronze lift nuts and a bronze stop nut to limit the downward travel of the stem and slide. All geared lifts shall have cast iron or steel housing and pedestals. Aluminum housing and pedestals shall not be acceptable. All lifts shall be rising stem type. Stem covers made of clear butyrate shall be furnished for all lifts. Lifts shall be grease lubricated and regreaseable through grease zerks. Oil bath lifts are not acceptable. Motor Operated Lifts Motor operator shall be a 460-V, 3 phase, 60-Hertz motor with precision reduction gearing enclosed in weather-proof housing. The operator shall be designed to raise the gate at a rate of approximately 12 in/min. Integral controls shall include a control power transformer, reversing controller, torque and limit switches, space heater to prevent condensation, openstop-closed push buttons. Installation The gate and accessories shall be installed according to manufacturer s recommendation. The gate shall be clean and free of construction debris and stem threads shall be lubricated prior to operation of the gate.if electric motor operator is used, limit switches shall be adjusted according to manufacturer s instructions. If hydraulic cylinder is used, the rod or stem connection shall be adjusted for correct stroking and closing action.the gate shall be cycled minimum of 1-1/2 cycles (openclose-open or vise versa) to ensure smooth operation.the gates may be field leak tested by the contractor. Leakage shall not exceed.05 gpm per foot of perimeter at the rated head, seating or unseating. Consult installation drawing for pressure rating of the specific gate. Heavy Duty Fabricated Stainless Steel Gate Schedule Size Operating Head Gate Configuration wxh Quantity seating/unseating mounting & operation Lift Type Remarks 20 F A B R I C A T E D S L I D E G A T E S

Representative Territories Listed by State ALABAMA Eco Tech, Inc. Phone: 770-345-2118 ALASKA Beaver Equipment Phone: 425-451-3862 ARIZONA C. R. Raleigh & Assoc. Phone: 623-972-9238 ARKANSAS H*E Engineered Equip. Phone: 918-251-2121 CALIFORNIA Southwest Valve & Equipment (Southern) Phone: 714-832-1090 DC Frost Associates, Inc. (Northern) Phone: 925-947-6733 COLORADO Pipestone Industrial Co. Phone: 303-771-2396 CONNECTICUT Atlantic Fluid Tech. Assoc. Phone: 508-755-0440 DELAWARE John B. Atherholt, Inc. Phone: 610-828-4140 DISTRICT OF COLUMBIA John B. Atherholt, Inc. Phone: 610-828-4140 FLORIDA Eco Tech, Inc. (Panhandle) Phone: 770-345-2118 TSC Jacobs Phone: 813-888-5556 GEORGIA Eco Tech, Inc. Phone: 770-345-2118 HAWAII CBC, Inc. Phone: 808-263-8838 IDAHO W-Cubed, Inc. (Eastern) Phone: 801-466-3819 Beaver Equipment Specialty Co. (Western) Phone: 425-451-3862 ILLINOIS Norquip, Inc. (Northern) Phone: 414-248-9445 Van Devanter Engineering Co. (Southern) Phone: 314-343-8880 INDIANA Colley & Associates Phone: 317-254-1001 IOWA Bert Gurney & Associates, Inc. Phone: 402-551-7996 KANSAS H*E Engineered Equip. Co., Inc. Phone: 913-236-9494 KENTUCKY BissNuss, Inc. (Eastern) Phone: 513-860-1630 Van Devanter Engineering Co., Inc. (Western) Phone: 314-343-8880 LOUISANA Gulf States Engineering Co. Phone: 504-243-5500 MAINE Atlantic Fluid Technology Assoc. Phone: 508-755-0440 MARYLAND John B. Atherholt, Inc. Phone: 610-828-4140 BissNuss, Inc. (Northwest) Phone: 412-221-1200 MASSACHUSETTS Atlantic Fluid Technology Associates Phone: 508-755-0440 MICHIGAN Norquip, Inc. (Upper Peninsula) Phone: 414-248-9445 Kennedy Industries, Inc. Phone: 248-684-1200 MINNESOTA Plant & Flanged Equipment Co. Phone: 763-792-3870 MISSISSIPPI Gulf States Engineering Co. Phone: 504-243-5500 MISSOURI H*E Engineered Equipment Co. (Western) Phone: 913-236-9494 Van Devanter Engineering Co. (Eastern) Phone: 314-343-8880 NEBRASKA Bert Gurney & Associates, Inc. Phone: 402-551-7995 NEVADA Southwest Valve & Equipment (Eastern) Phone: 714-832-1090 D.C. Frost (Western) Phone: 925-947-6733 NEW HAMPSHIRE Atlantic Fluid Technology Associates Phone: 508-755-0440 NEW JERSEY Atlantic Fluid Technology Associates (Northern) Phone: 508-755-0440 John B. Atherholt, Inc. (Southern) Phone: 610-828-4140 NEW MEXICO Pipestone Industrial Company Phone: 303-771-2300 NEW YORK Atlantic Fluid Technology Associates (Southeast) Phone: 508-755-0440 J.L. Moore, Inc. Phone: 716-655-3433 NORTH CAROLINA EW2 Environmental Phone: 704-542-2444 NORTH DAKOTA Plant & Flanged Equipment Co. Phone: 763-792-3870 OHIO BissNuss, Inc. (Southeast) Phone: 614-895-0911 BissNuss, Inc. (Southwest) Phone: 513-860-1630 BissNuss, Inc. (East) Phone: 412-221-1200 BissNuss, Inc. (North) Phone: 440-871-8394 OKLAHOMA H*E Engineered Equip. Co. Phone: 918-251-2121 OREGON Beaver Equipment Phone: 503-692-8106 PENNSYLVANIA BissNuss, Inc. (Western) Phone: 412-221-1200 John B. Atherholt, Inc. (Eastern) Phone: 610-828-4140 RHODE ISLAND Atlantic Fluid Technology Assoc. Phone: 508-755-0440 SOUTH CAROLINA EW2 Environmental Phone: 704-542-2444 SOUTH DAKOTA Plant & Flanged Equipment Co. Phone: 763-792-3870 TENNESSEE Eco Tech, Inc. Phone: 770-345-2118 TEXAS Hartwell Environmental Corp. (Central) Phone: 281-516-7102 Municipal Valve & Equipment Co. (North) Phone: 214-934-1261 Pipestone Industrial Co., Inc. (Southeast) Phone: 303-771-2300 UTAH W-Cubed, Inc. Phone: 801-466-3819 VERMONT Atlantic Fluid Technology Assoc. Phone: 508-755-0440 VIRGINIA Engineered Systems & Products (Northern) Phone: 804-271-7200 John B. Atherholt, Inc. Phone: 610-828-4140 WASHINGTON Beaver Equip. Specialty Co., Inc. Phone: 425-451-3862 WEST VIRGINIA BissNuss, Inc. (Southern) Phone: 304-346-7532 BissNuss, Inc. (Northern) Phone: 412-221-1200 WISCONSIN Norquip, Inc. Phone: 414-248-9445 Plant & Flanged Equipment Co. (Western) Phone: 763-792-3870 WYOMING Pipestone Industrial Co., Inc. Phone: 303-771-2300 INTERNATIONAL Stealth Valve & Controls, Ltd (Canada) Phone: 905-845-4500 Construction Products Int l (Middle East) Phone 281-362-0155 CIVIL REPRESENTATIVE States: AL, AZ, GA, KY, LA, TN Hydro Con, Inc. Phone: 901-755-8806 Hydro Gate 6101 Dexter Street Commerce City, CO 80022

Our mission is to be the leading water control gate manufacturer in the world, through continuous development of an organization which promotes extraordinary customer service, superior engineering, quality products and on-time delivery. Hydro Gate Your Source for Water Control Gates Toll Free 800-678-8228 303-287-8531 (fax) www.hydrogate.com FAB0402