ACO ShowerDrain Technical information universal design award 2010 universal design consumer favorite 2010
ACO ShowerDrain Impress your customers with elegant designed bathroom drainage solutions ACO supplies you with sophisticated solutions from the world s leading drainage brand. The ACO ShowerDrain product line satisfies the demands of many house builders and architects for generous and homogenous bathroom design, with no thresholds, changes of materials and no barriers. The classic models for this trend come from the traditional bathing culture in the orient, as well as modern luxury spas. ACO quality and functionality puts you on the safe side The high quality of the components is not limited to the design, materials and the finishing, aspects which have at least the same high priority as handling and installation safety at the building site. With low and flexible installation heights, and reliable seals, ACO ShowerDrain has a solution for every application. The difference is in the details For house builders thinking in the long term, the ACO ShowerDrain is a decision for prudent luxury where all the details can be relied on. The extremely smooth surfaces guarantee safe drainage and hygiene in bathrooms. The seals, joints and thickness of the materials are the guarantors for low noise emissions. The ACO ShowerDrain satisfies the latest fire protection regulations for multi-storey buildings. A real beauty: Our award-winning design The gratings and covers in stainless steel visibly demonstrate the top quality of the ACO ShowerDrain each and every day. As you can see: ACO ShowerDrain gives you any number of opportunities of impressing your customers through quality and looks! Contents 2 ACO ShowerDrain general information Planning information 04 Quick finder 08 ACO ShowerDrain E design without limits 10 The linear solution with thin bed flange (with or without vertical flanges) 12 The linear solution with vertical drain body 14 Design Grating stainless steel, glass 16 Showerboard 18 Customised solutions 20 The curved solution 22 The corner solution 24 Lightline water-sensitive illumination for shower channels 26 The invisible slot drainage solution 28 The Walk-in solution 30 ACO ShowerDrain C functional design 34 The linear solution with horizontal flange 36 The linear solution with horizontal and vertical flange 38 The linear solution without flange 40 The linear solution without foul air trap 42 ACO ShowerDrain F flexible installation 44 Two part solution 46 ACO ShowerDrain bath drains 49 The design solution for point drainage 50 Design Grating 52 Lightpoint illumination for bath drains 53 Glass grating 54 Top section 55 Easyflow gully bodies 58 Showerboard 60 Wal-Selecta cast iron gully bodies 62 EG 150 stainless steel gullies 64 FG stainless steel gullies 70
3
ACO ShowerDrain ACO ShowerDrain planning information One of the most important decisions taken for threshold-free shower areas is how to design the drainage. Not only from an aesthetical point of view, but also technically, the solution must fit the bathroom layout with possible slope directions as well as it must fit the tile materials used. The ACO ShowerDrain product range offers both the more traditional point drainage solution (gullies), where slope from all sides is needed, as well as line drainage solution (channels), where the slope only has to be one directional. Especially with luxurious large dimensioned tiles and marble materials the ACO ShowerDrain channels are the ultimate solutions. Installation Line drainage Point drainage Installation in front of the wall Installation at the entrance Installation in the middle simplest slope solution in one direction slope away from the bathroom no risk of overshooting water use of wall flange is recommended (see waterproofing on page 5) slope in one direction, towards the bathroom overshooting water/foam may enter the bathroom slope of bathroom floor towards showerarea is recommended channel length should exactly fit the wall-wall opening can be placed against/under shower door slope in 4 directions is needed complicated cutting of tiles Walk-in: Installation in front of the wall Walk-in: Installation with two channels Walk-in: Installation in the middle slope in one direction only shower area is sloped, or whole bathroom floor can be sloped use of wall flange is recommended (see waterproofing on page 5) two directional slope towards the bathroom overshooting water/foam may enter bathroom slope of bathroom floor towards showerarea is recommended channel length should exactly fit the width of the shower area slope in 4 directions is needed complicated cutting of tiles 4
ACO ShowerDrain Line drainage Point drainage Walk-in: Installation in front of the wall Walk-in: Installation at the entrance Walk-in: Installation in the middle simplest slope solution in one direction slope away from the bathroom no risk of overshooting water use of wall flange is recommended (see waterproofing on page 5) slope in one direction, towards the entrance overshooting water/foam may enter the entrance slope of bathroom floor towards shower area is recommended channel length should exactly fit the width of the opening slope in four directions needed complicated cutting of files Flow rates for shower drains The choice of shower drains generally depends on the connected values of the shower fittings. A typical average value for this is 0.15 l/s, and 70 % of the shower heads have a maximum capacity of less than 0.3 l/s. This means that a shower drain with this flow-rate can be combined with most of the shower heads available on the market. Unlike this average value, the standard ACO ShowerDrain channel has a minimum flow-rate of 0.4 l/s and can therefore be used to drain off the water produced by even higher capacity shower heads. EN 1253-1 defines minimum flow-rates for floor drains. The value for DN 50 floor drains is 0.8 l/s. This figure has to be achieved with accumulation of 20 mm above the grating (see figure below). 20 mm accumulation levels can usually be easily achieved with floor drains because the floor slopes in from four sides to the drain. In this brochure you will find three flow rates for each product, of which one is according to EN 1253 and the other two are the recommended practical flow rates depending on the application. The flow rates for shower channels at the entrance are lower because no overshooting of water can be allowed. EN 1253 Wall Entrance Type of installation 20 mm 5 Flow rate Q l/s Flow rate test according to EN 1253-1 Not recommended Installation against the wall (5 mm build-up) Recommended Installation at the entrance (without overshooting) Recommended 5
ACO ShowerDrain Water-proofing for shower channels 1. Channels without flange Seepage water may penetrate through the tile joints. Normally, concrete slab is water-tight and the penetrated water will evaporate. With non-water-resistant slabs such as wood, this method is not applicable. Channels with flange and waterproofing shall be used in this case. Available for ShowerDrain C Evaporation Tiles Tile glue Concrete 2. Channels with flange without seepage drainage Seepage water may penetrate through the tile joints and is retained between the thin-bed sealing and the tiles. The penetrated water will evaporate. Available for ShowerDrain E and ShowerDrain C Evaporation Tiles Tile glue Water proofing Concrete 3. Channels with flange and seepage drainage Seepage water is drained via the thin-bed sealing into the channel body. Available for ShowerDrain F Tiles Tile glue Water proofing Concrete 4. Channels with wall flange (vertical flanges) Shower channels with wall flanges provide an additional protection against leaking problems in the very sensitive wall and floor joints. Available for ShowerDrain E and ShowerDrain C Evaporation Tiles Tile glue Water proofing Concrete Noise transfer The ACO ShowerDrain has been tested pursuant to DIN 4109 and SIA 181 to determine its enhanced noise transfer levels. Tests were carried out by the Fraunhofer Institute IBP which is ac- credited by DAP pursuant to EN ISO/ICE 17025. The impact sound noise level (water hitting the floor plate) was measured at 27 db(a). DIN 4109 and VDI 4100 specify 30 db(a), which means that the ShowerDrain product line easily satisfies the standard criteria. The shower drains even comply with noise protection level II for apartments in apartment blocks pursuant to VDI regulation 4100. 6
ACO ShowerDrain 7
ACO ShowerDrain ACO ShowerDrain quick finder Design criteria Installation criteria Shape Electro polished gratings Glass gratings Brushed gratings Blasted gratings LED light available Width of channel/ Dimension of grating Construction height [mm] Foul air trap [mm] Flange* Suitable for vinyl floor Showerboard available Page Straight x x x 105 50 H, V x Straight 12 Straight x x x 79 25 H, V x Straight 12 ACO ShowerDrain E Curved x x 105 50 H, V Curved 22 Corner x x 105 50 H, V Corner 24 Straight Slot 105 50 V ACO ShowerDrain ES Straight 28 Straight x 70 93 50 N, H, V Straight ACO ShowerDrain C Straight x 70 65 30 Straight Straight x 100 87 50 N Straight ACO ShowerDrain F Straight x 100 67 30 Straight 34 44 Page x x 150 50 H x x 150 30 H x ACO ShowerDrain Easyflow 58 x 150 50 H ACO ShowerDrain Wal-Selecta 62 x 150 50 x 150 50 ACO ShowerDrain EG 150 64 x 100 50 x 150 50 ACO ShowerDrain FG 70 x 100 50 *H = Standard flange, V = Vertical flange; N = No flange 8
ACO ShowerDrain 9
ACO ShowerDrain E ACO ShowerDrain E design without limits ACO ShowerDrain solutions can and are to inspire a creative bath room planning. Above all, however, they can be adapted to every desired design. This is the reason why our range offers different solutions: classic linear solution extravagant curved solution sophisticated corner solution walk-in solution slot drainage solution Moreover, the planning and design concept allows a combination of various designs and thus a further customisation in larger bathrooms or alike. Naturally, the gratings and covers can lateron be replaced by another design. The ACO quality brand stands for continuity, compatibility and availability of these ranges. Linear solution The ACO ShowerDrain E shower channel with straight design grating Page 12 Curved solution The ACO ShowerDrain E shower channel with curved design grating Page 22 Corner solution The ACO ShowerDrain E shower channel with corner design grating Page 24 Lightline The ACO ShowerDrain E shower channel is available with illumination Page 26 Invisible solution Slot drainage with cover for tiled finish let the shower drainage become invisible Page 28 Walk-in solution Nobel wooden grating with stainless steel tray optionally with or without drain Page 30
ACO ShowerDrain E ACO quality The ACO ShowerDrain individual components are firmly welded with each other. Therefore, leakages cannot develop, neither by extreme stress nor by wear. Flexible grating design and illumination The range of grating designs enables the appearance of the room to be changed at a later date by simply replacing the gratings. The Lightline version with watersensitive illumination which can also be retrofitted create very interesting colour and lighting effects (page 26). Electro-polished surface All shower channels ACO ShowerDrain E and matching gratings are electro-polished. Electro-polishing involves a physical process to gently create a surface with a high gloss finish. Polishing creates a shiny pore-free surface which reduces cleaning and maintenance to a minimum: water and soap residues can be easily removed from the grating and the channel surfaces. The ground appearance of the channel is still structurally visible even after electro-polishing and provides longterm protection of the shiny appearance. Large cleaning section After removing the dual-body foul air trap, the entire pipe section is available. For this reason, a cleaning spiral can be inserted without problems in the case of pipe blockage. To clean the ACO ShowerDrain drain, first take off the design grating with a lifting aid. Then the dual-body foul air trap can be removed. The direct access to the outlet pipe is possible now. The functional drain can be cleaned rapidly and without problems. After cleaning the foul air trap and the design grating can be reinserted. 11
ACO ShowerDrain E The linear solution with thin bed flange Article description drainage channel DN 50 for the shower area, suitable for all push-fit pipe socket systems installation height: 105 160 mm (50 mm FAT) or 79 134 mm (25 mm FAT) full stainless steel channel tested according to DIN EN 1253: flow rate 0.8 l/s, flow rate at entrance of shower: 0.4 l/s, flow rate against the wall: 0.6 l/s channel width: mm channel body with lateral slope removable dual-body foul air trap of stainless steel electro-polished surface surrounding, integral thin bed flange with wall flange, optional with vertical flange design ACO ShowerDrain with wall flange for an absolutely safe sealing in the case of wall installation Product advantages full welded stainless steel body, no risk of leakage electro-polished body and gratings for great looks and easy cleaning wide range of gratings including stainless steel, glass materials levelling feet for easy installation flanges optionally with vertical design for safe sealing in the case of wall installation illumination system available (refer to page 26) F F 15 40 30 F H H = 105 up to 160 mm with foul air trap height 50 mm H = 79 up to 134 mm with foul air trap height 25 mm The dimensional drawing exemplifies vertical flanges on rear and rightside Installation dimensions (mm) 700 800 900 1000 1200 Type of flange F Horizontal 30 Vertical 20 12
ACO ShowerDrain E Available design gratings on pages 16 and 17 Example without wall flange Example of wall flange on two sides Order data Channels with wall flange (excluding gratings) Length (mm) Art. no. foul air trap = 25 mm Art. no. foul air trap = 50 mm 700 0153.76.44 0153.73.36 800 0153.76.45 0153.73.38 900 0153.76.46 0153.73.39 1000 0153.76.47 0153.73.40 1200 0153.76.48 0153.73.41 700 9010.55.53 9010.55.18 800 9010.55.54 9010.55.19 900 9010.55.55 9010.55.20 1000 9010.55.56 9010.55.21 1200 9010.55.57 9010.55.22 700 9010.55.58 9010.55.23 800 9010.55.59 9010.55.24 900 9010.55.60 9010.55.25 1000 9010.55.61 9010.55.26 1200 9010.55.62 9010.55.27 700 9010.55.63 9010.55.28 800 9010.55.64 9010.55.29 900 9010.55.65 9010.55.30 1000 9010.55.66 9010.55.31 1200 9010.55.67 9010.55.32 700 9010.55.68 9010.55.33 800 9010.55.69 9010.55.34 900 9010.55.70 9010.55.35 1000 9010.55.71 9010.55.36 1200 9010.55.72 9010.55.37 700 9010.55.73 9010.55.38 800 9010.55.74 9010.55.39 900 9010.55.75 9010.55.40 1000 9010.55.76 9010.55.41 1200 9010.55.77 9010.55.42 700 9010.55.78 9010.55.43 800 9010.55.79 9010.55.44 900 9010.55.80 9010.55.45 1000 9010.55.81 9010.55.46 1200 9010.55.82 9010.55.47 700 9010.55.83 9010.55.48 800 9010.55. 9010.55.49 900 9010.55.85 9010.55.50 1000 9010.55.86 9010.55.51 1200 9010.55.87 9010.55.52 none right-hand left-hand left-hand and right-hand rear rear and left-hand rear and right-hand rear, 30 left-hand and right-hand Type of vertical flange 30 20 30 30 20 20 13 30 30 30 20 H 20 30
ACO ShowerDrain E The linear solution with vertical drain body Article description drainage channel DN 50 for the shower area, suitable for all push-fit pipe socket systems installation height: 30 134 mm full stainless steel channel tested according to DIN EN 1253: flow rate 0.4 l/s without accumulation, 0.6 l/s with accumulation of 20 mm channel width: mm channel body with lateral slope removable dual-body foul air trap of stainless steel electro-polished surface 90 inclination surrounding, integral thin bed flange ACO ShowerDrain with vertical drain body (90 inclination) Product advantages full welded stainless steel body, no risk of leakage electro-polished body and gratings for great looks and easy cleaning wide range of gratings including stainless steel, glass materials levelling feet for easy installation flanges with vertical design for safe sealing in the case of wall installation available on request illumination system available 15 (refer to page 26) 170 144 H 115 Ø 50 14
ACO ShowerDrain E Available design gratings on pages 16 and 17 Installation dimensions (mm) 700 800 900 1000 1200 (mm) 760 860 960 1060 1260 Order data Channel Length (mm) Art. no. 700 9010.66.30 800 9010.66.31 900 9010.66.32 1000 9010.66.33 1200 9010.66.34 Hair strainer To prevent pipes being obstructed by hair, the plastic hair strainer can be inserted. It fits all ACO ShowerDrain E-line. Article number 9010.72.00 15
ACO ShowerDrain E Design gratings for the linear solution Order data Stainless steel design gratings Design Wave Quadrato Flag Chain Hawaii Mix Pixel Tile (tileable, 10 mm) Illumination with Lightline x x x x x x x Lenght (mm) Art. no. 700 0153.73.42 800 0153.73.43 900 0153.73.44 1000 0153.73.45 1200 0153.73.46 700 0153.73.59 800 0153.73.60 900 0153.73.61 1000 0153.73.62 1200 0153.73.63 700 0153.73.69 800 0153.73.70 900 0153.73.71 1000 0153.73.72 1200 0153.73.73 700 9010.55.93 800 9010.55.94 900 9010.55.95 1000 9010.55.96 1200 9010.55.97 700 9010.55.98 800 9010.55.99 900 9010.56.00 1000 9010.56.01 1200 9010.56.02 700 9010.56.03 800 9010.56.04 900 9010.56.05 1000 9010.56.06 1200 9010.56.07 700 9010.56.08 800 9010.56.09 900 9010.56.10 1000 9010.56.11 1200 9010.56.12 700 0153.81.87 800 0153.81.88 900 0153.81.89 1000 0153.81.90 1200 0153.81.91 16
ACO ShowerDrain E Order data Glass gratings Design Length (mm) Art. no. Glass, black Glass, white Glass, grey Glass, brown Glass, black with floral sand blasting Glass, white with floral design in black 700 9010.56.67 800 9010.56.68 900 9010.56.69 1000 9010.56.70 1200 9010.56.71 700 9010.56.72 800 9010.56.73 900 9010.56.74 1000 9010.56.75 1200 9010.56.76 700 9010.56.77 800 9010.56.78 900 9010.56.79 1000 9010.56.80 1200 9010.56.81 700 9010.56.82 800 9010.56.83 900 9010.56. 1000 9010.56.85 1200 9010.56.86 700 9010.57.12 800 9010.57.13 900 9010.57.14 1000 9010.57.15 1200 9010.57.16 700 9010.57.17 800 9010.57.18 900 9010.57.19 1000 9010.57.20 1200 9010.57.21 17
ACO ShowerDrain E Showerboard Article description ready-to-install shower floor of rigid foam with integrated full stainless steel shower channel coated with water-impermeable fleece ready-to-tile fleece overlapping (70 mm) for the safe sealing of transitions at floor and wall board can be cut to length accessible with wheel chair load as from tile size: 50 x 50 mm pre-shaped slope of 2 % to integrated shower channel DN 50 suitable for all push-fit pipe socket systems outflow capacity: as from 0.4 l/s consisting of showerboard and 3 substructure elements (heights: 20, 30 and 40 mm) for channel embedding b Product advantages integrated slope, ready for tiling water-proof fleece for easy thin-bed connection can take wheel-chair loads illumination system available wide range of stainless steel gratings Installation dimensions a x b (mm) Channel length 800 x 1200 700 900 x 1200 800 1000 x 1200 900 1200 x 1200 1100 Z 100 H T a 15 Fleece projection Vliesüberstand surrounding umlaufend 70 70 mm mm Height dimensions depending on several cutting lengthes 18 Z (cutting length) H 1) H 2) H 3) 1100 105 115 135 1000 103 113 133 900 101 111 131 800 99 109 129 700 97 107 127 600 95 105 125 500 93 103 123 The showerboard can be cut to length and can thus be adjusted to the individual conditions 1) = when using the substructure elements with 20 and 40 mm height, T = 85 2) = when using the substructure elements with 30 and 40 mm height, T = 95 3) = when using the substructure elements with 20, 30 and 40 mm height, T = 115
ACO ShowerDrain E Showerboard with water-tight fleece (ready-to- tile, slope 2 %) Substructure element Channel is integrated into the board With the help of the substructure element, the channel drain can be safely connected to the pipe without problems.the space for the pipe can be cut out easily in any direction The fleece is already water-tight and can be provided directly with tile adhesive and be tiled Order data Showerboard Dimensions (mm) Art. no. Design 800 x 1200 620410 900 x 1200 620417 1000 x 1200 620424 1200 x 1200 620431 Wave 800 x 1200 620413 900 x 1200 620420 1000 x 1200 620427 1200 x 1200 620434 Quadrato 800 x 1200 620415 900 x 1200 620422 1000 x 1200 620429 1200 x 1200 620436 Flag 800 x 1200 620459 900 x 1200 620460 1000 x 1200 620461 1200 x 1200 620462 Chain 800 x 1200 620463 900 x 1200 620464 1000 x 1200 620465 1200 x 1200 620466 Hawaii 800 x 1200 620467 900 x 1200 620468 1000 x 1200 620469 1200 x 1200 620470 Mix 800 x 1200 620471 900 x 1200 620472 1000 x 1200 620473 1200 x 1200 620474 Pixel 800 x 1200 620416 900 x 1200 620423 1000 x 1200 620430 1200 x 1200 620437 Tile (tileable, 10 mm) The fleece projecting the board serves as connection option of thin bed sealing to adjoining side walls/at floor 19
Order Price enquiry ACO ShowerDrain E Customised solutions With the help of this individual configuration, customised channels can be planned in five steps. PDF Downloaded on: www.aco-haustechnik.de/showerchannelspecial For tender preparation, you may copy the two-page configuration, fill in and fax to following fax number or email : ACO Haustechnik Project planning of shower channels Fax +49 (0) 36965 819-361 Email: haustechnik@aco-online.de Processed by: Sales representative: Date: Object (No., Name, City): Dealer, Contact: Transaction No., Voucher No.: Road: City: Tel.: Tel.: Fax: Fax: Email: Email: 1. Height of tile frame (H) Please check and fill in: Tile (standard height H = 15 mm) 30 Natural stone with frame height H =... mm (max. 30 mm) H 2. Inclination of drain body/bodies (Following installation heights are just valid with standard frame height H = 15 mm) Please check: Vertical drain body (90 inclination) Water trap height = 50 mm, OS 50 Shower channel installation height 30 134 mm (H installed ) Lateral drain body (1.5 inclination) Water trap height = 50 mm, OS 50 Shower channel installation height 105 160 mm (H installed ) H installed Einbau 41 (GV OS 50 mm) 27 (GV OS 25 mm) 64 (GV OS 50 mm) 52 (GV OS 25 mm) Lateral drain body (1.5 inclination) Water trap height = 25 mm, OS 25 Shower channel installation height 79 134 mm (H installed ) 3a. Channel configuration for installation within a room (Maximum length = 2400 mm, standard width = mm) Only fill out when installed within a room: 30 30 =... mm =... mm thin bed flange circumferential 20
30 30 3b. Channel configuration for wall installation (Maximum length = 2400 mm, standard width = mm) ACO ShowerDrain E Only mark a cross and fill in when installing in a wall (1 3 wall flanges available): =... mm =... mm right-hand 144 left-hand right- and left-hand rear and left-hand rear and right-hand 144 144 =... mm =... mm =... mm =... mm =... mm =... mm =... mm =... mm rear 30 144 20 40 144 rear, right- and left-hand =... mm =... mm =... mm =... mm 4. Number and position of drain bodies with drain socket DN 50/ DN 40 Please check and fill in: Drain body centralised One drain body Two drain bodies Three drain bodies L3 L4 L3 L4 L5 L3 L4 L5 L6 L3 =... mm L4 =... mm L3 =... mm L4 =... mm L5 =... mm L3 =... mm L4 =... mm L5 =... mm L6 =... mm To guarantee compliance with our standard flow rate of 0.6 l/s with 20 mm water accumulation according to DIN EN 1253, or 0.4 l/s without water accumulation, the maximum flow path of the water measured from each end of the channel must NOT exceed 700 mm to the centre of the drain body. In the case of ShowerDrains with more than one outlet, the distance from the middle of one drain outlet to the middle of the adjacent drain outlet most also NOT exceed 700 mm. The flow rate without water accumulation drops to min. 0.15 l/s when the flow paths are between 700 mm to max. 1000 mm long. 5. Selecting the design grating (Gratings in customised lengths are only available as stainless steel gratings) Please check: Wave Chain Pixel Tile (tileable, standard = Quadrato Hawaii 10 mm) Flag Mix If a different frame height is selected in Item 1., the height of the selected design grating or the selected stainless steel cover is automatically adjusted.
ACO ShowerDrain E The curved solution Article description drainage channel DN 50 as curved solution for the shower area Installation height: 105 160 mm full stainless steel channel standard design outflow capacity: 0.6 l/s without accumulation channel width: mm outside radius: 540 mm leg length 550 mm incl. design grating 3 drains DN 50 suitable for all push-fit pipe socket systems removable dual-body foul air trap inclination: 1.5 electro-polished surface surrounding, integral thin bed flange with wall lip at both front sides Product advantages full welded stainless steel body, no risk of leakage electro-polished body and gratings for great looks and easy cleaning levelling feet for easy installation illumination system available (refer to page 26) 42 105 160 mm 22
ACO ShowerDrain E Order data Curved solution channel Length Art. no. 1090 x 1090 9010.58.45 universal design award 2010 universal design consumer favorite 2010 The curved ACO ShowerDrain design was granted the if product design award 2009 and the red dot design award 2009 and two universal design awards 2010. Order data Stainless steel design gratings (Leg length 550 mm) Art. no. Illumination with Lightline Design 9010.58.77 x 144 Quadrato 550 R 540 9010.58.78 x Flag 1090 9010.58.81 x 550 Hawaii 9010.58.82 x 1090 Pixel One of both legs can be manufactured with a length deviating from the standard dimension of 550 mm 9010.58.79 Tile (tileable, 10 mm) 23
ACO ShowerDrain E The corner solution Article description drainage channel DN 50 as corner solution for the shower area, suitable for all push-fit socket systems installation height: 105 160 mm full stainless steel channel standard design outflow capacity: 0.4 l/s channel width: mm leg length: 400 mm drain DN 50 suitable for all push-fit pipe socket systems channel body with lateral slope removable dual-body foul air trap of stainless steel inclination: 1.5 electro-polished surface surrounding, integral thin bed flange with wall lip at both legs Product advantages full welded stainless steel body, no risk of leakage electro-polished body and gratings for great looks and easy cleaning levelling feet for easy installation illumination system available (refer to page 26) wide range of stainless steel gratings 105 160 mm 40 449 398 449 398 DN 50 82 133 42 24
ACO ShowerDrain E Order data Corner solution channel Length Art. no. 398 x 398 0153.97.29 Flanges (Vertical flange) At both exteriors, the shower channel possesses a thin bed flange with wall lips. These enable a perfect connection of channel to the walls by relevant alternative sealings. The inner surfaces, too, possess a thin bed flange to make sure that sealing can be carried out over the floor screed. Order data Corner solution design gratings Art. no. Illumination with Lightline 0153.97.07 x Design Wave 0153.97.02 x Quadrato 0153.97.03 x Insulation (option) Thin bed flange with wall flange Flag Thin bed sealing 9010.56.19 x Floor tile Tile adhesive Thin bed sealing Thin bed flange Flexible joint Wall tile Tile adhesive 9010.56.20 x Chain Floor screed Grating Hawaii 9010.56.21 x Channel body Mix 9010.56.22 x Pixel Detail of wall flange (vertical flange for wall sealing) 0153.97.28 Tile (tileable, 10 mm) 25
ACO ShowerDrain Lightline water-sensitive illumination for shower channels Article description illumination kit for ACO ShowerDrain E shower channels suitable for stainless steel design gratings, not suitable for glass gratings will light automatically when in contact with water consisting of: 2 rechargeable LED modules and 1 recharger low voltage LED module suitable for underwater use available only for ShowerDrain E solutions Blue Red 26 Green Rainbow
ACO ShowerDrain E Illumination kit Order data Illumination kit (2 LED modules and recharger) Design Blue Red Green Rainbow Art. no. 9010.89.01 9010.89.02 9010.89.03 9010.89.08 Illumination is possible for the straight, curved and corner ACO ShowerDrain E shower channels. Following colours can be chosen: Blue, Red, Green or Rainbow. Function of illumination is very easy: As soon as sufficient water has accumulated in the channel, the circuit connects to the contacts of the LED modules and the LEDs start glowing. After a delay of several minutes, the illumination switches off if no more water is entering the channel. LED modules Considering a daily showering period of 15 minutes, the batteries must be recharged after approx. 3 months. Order data LED battery module (1 LED module) Design Blue Red Green Rainbow Art. no. 9010.89.05 9010.89.06 9010.89.07 9010.89.09 Place LED modules ready for installation Remove the grating with the lifting aid Insert LED modules and fix with the help of supplied plastic pins, then re-insert the grating 27
ACO ShowerDrain ES ACO ShowerDrain ES the invisible solution The Design The new ACO ShowerDrain ES shower channel is based on the well-known ShowerDrain E shower channel series extensively used in a huge variety of projects all over the globe. The Message All these mentioned features (slot drainage, cover for tiled finish, flange for wall installation) point to the product s overall intention: Let the shower drainage become invisible. The Product Features 1 Shower channel of stainless steel, material grade 304 with circumferential flange, feet, gully body and inspection opening (round or triangular design). Therefore, its proven system for height adjustability and the construction of the gully body including a removable foul air trap became part of the new shower channel as well. The channel is equipped with a drainage slot that enables the usage of a cover for tiled finish. Additionally, a circumferential flange with wall seal supports the designated installation against the wall. There is also one more fundamental consideration which is important. Tiles are laid wall-to-wall and therefore nothing interrupts the clean lines, exactly like a wooden or stone floor. The shower water disappears into a small crack along the angle between the floor and wall tiles. 2 Removable foul air trap of plastic consisting of two parts. 3 Cover plate of stainless steel, material grade 304 for tiled finish (round or triangular design) to be ordered separately. 3 2 1 28
ACO ShowerDrain ES Article description ACO ShowerDrain ES slot channel made of stainless steel, material grade 304 Electro polished channel surface Removable two-parts foul air trap (height: 50 mm) Horizontal outlet DN 50 for all plastic pipe connections Circumferential and wall flange with sand coating for compound sealing Visible slot dimension: 8 mm Flow rate: 0.5 l/s with 20 mm water build-up according to EN 1253 Flow rate: 0.3 l/s without water build-up Height adjustability: 105 160 mm Order data Triangular version Article No. 9010.66.76 9010.66.77 9010.66.78 9010.66.79 9010.66.80 33 63 700 800 900 1000 1200 760 860 960 1060 1260 surrounding Flansch thin umlaufend bed flange beschichtet 8 H=105 160 Order data Round version Article No. 9010.66.70 9010.66.71 9010.66.72 9010.66.73 9010.66.74 700 800 900 1000 1200 760 860 960 1060 1260 63 33 8 Ø261 H=105 160 180 Order data Covers for tiled finish (made from stainless steel, material grade 304) Article No. 9010.66.81 Article No. 9010.66.75 105 10 19 10 19 208 235 235 90 105 29
ACO ShowerDrain E The Walk-in solution Standing room preferred Wood is one of the most diverse, beautiful and comfortable materials to use in the home. Wooden floors and furniture will outlast any trend. Or vice versa: almost every trend makes use of wood in some way, either functionally or decoratively. But in the bathroom this natural material has only rarely been used until now: a piece of furniture here, a footboard there, not a lot more. With the Walk-in Solution we can now satisfy consumers' desire for wooden elements in the bathroom. The floor-level drainage solution ACO ShowerDrain Walk-in consists of two components: a drainage tun dish made from high-quality stainless steel with electro polished surface, and a grating which is as beautiful as it is sturdy, made from waterproof, oiled hardwood. Stumbling is a thing of the past with the ACO ShowerDrain Walk-in. Because the wooden grating is firmly fixed and absolutely flush with the floor in its stainless steel tun dish. And it doesn't just make your bathroom at home look like a health-giving spa: when you walk barefoot across the wooden grating you will feel a gentle, relaxing massage effect. The wooden gratings are 500 mm wide and are available in lengths of 700, 800, 900, 1000 and 1200 mm. You can choose between a lattice grating and a plank grating. The warm wood hues lend your bathroom a very relaxed and comfortable atmosphere. A special surface layer sealant ensures the gratings are protected and highly durable. This is built into the bathroom in the floor space in front of the washbasin or in front of the shower area. The underside is made from PUR foam, making it easy to build into the floor structure. The tray for installation in front of the washbasin does not need to be connected to the pipe system. The surrounding connecting rim enables a quick and secure thin bed seal. When installing in front of the shower area the tray is emptied via a drain. 30
ACO ShowerDrain E 31
ACO ShowerDrain E Walk-in with drain socket to build in in front of shower areas without drain socket to build in in front of washing areas To collect and drain splashes and drips Only suitable for dry areas only available with shower channels or bath drains Wood lattice Wooden plank Wood lattice Wooden plank grating grating grating grating Article description Walk-in with drain socket drainage tray for the access to the shower area stainless steel tray electro-polished surface drain socket for connection of a plastic drain body DN 50 or Wal-Selecta DN 50 drain body with surrounding connecting rim for thin bed sealing trough support in PUR foam, attached to Walk-in stainless steel tray trough support sanded all the way around with lateral slope 62 PUR Hartschaum foam Ø 125 500 560 Article description 62 Walk-in without drain socket enclosed stainless steel tray, suitable for dry areas electro-polished surface with surrounding connecting rim for thin bed sealing trough support in PUR foam, attached to Walk-in stainless steel tray trough support sanded all the way around with lateral slope PUR Hartschaum foam 500 560 32
ACO ShowerDrain E Order data Wood lattice grating (cover) (mm) Art. no. 700 9010.58.49 800 9010.58.50 900 9010.58.51 1000 9010.58.52 1200 9010.58.53 Walk-in with drain socket (without cover) (mm) (mm) Art. no. 700 760 9010.56.28 800 860 9010.56.29 900 960 9010.56.30 1000 1060 9010.56.31 1200 1260 9010.56.32 Wooden plank grating (cover) (mm) Art. no. 700 9010.58.35 800 9010.58.36 900 9010.58.37 1000 9010.58.38 1200 9010.58.39 Walk-in without drain socket (without cover) (mm) (mm) Art. no. 700 760 9010.56.23 800 860 9010.56.24 900 960 9010.56.25 1000 1060 9010.56.26 1200 1260 9010.56.27 The Walk-in solution received the if product design award 2010 Walk-in in front of shower areas Walk-in in front of washing areas 33
ACO ShowerDrain C ACO ShowerDrain C functional design The ShowerDrain C series is characterised by modern design and perfect functionalality. The basic is the high quality stainless steel which is used for the production of the shower channel itself, gully and grating. The foul air trap is made out of polypropylene. The steel parts are pasivated; the gratings are brushed to the silk gloss. From the user s point of view the ACO ShowerDrain C excelled especially by the high flow rate, very low construction height and very easy maintenance. The linear solution with horizontal flange The ACO ShowerDrain C shower channel for sealing without contact to walls Page 36 The linear solution with vertical flange The ACO ShowerDrain C shower channel with vertical flange for rear wall connection Page 38 The linear solution without flange The ACO ShowerDrain C shower channel for installation with sealing under the channel and gully Page 40 The linear solution without foul air trap The ACO ShowerDrain C shower channel for minimum construction height with vertical outlet and without foul air trap Page 42 34
ACO ShowerDrain C Low construction height The standard model of ACO ShowerDrain C 50 mm of water column in the foul air trap) has a construction height only 92 mm. The lowered model (30 mm of water column in the foul air trap) has incredible construction height of only 65 mm. If integrated foul air trap not needed, it is possible to install ACO ShowerDrain C only with the spigot. In this case, the construction height is equal to the height of the channel only 18 mm. These values enable very wide application of ACO ShowerDrain C in the modern new buildings and buildings under reconstruction. Easy maintenance The user s comfort is increased by the efficiency of the foul air trap and its easy cleaning. Syphon (foul air trap) is made out of plastics. The reliable seal is injection-moulded together with the foul air trap. Due to this construction, there is no risk of losing of the sealing, or another malfunction. The foul air trap can be easily removed from the shower channel. It is easy to disassamble it into two separate parts and clean it by hand or in a dish washer. Versions of ACO ShowerDrain C The shower drain is made in width of 70 mm, in seven lengths 585 mm, 685 mm, 785 mm, 885 mm, 985 mm, 1085 mm and 1185 mm. with standard and lowered height with or without vertical or horizontal flange with or without foul air trap The offer consists of five elegant stainless steel grates in version of one or three parts. The three parts grates are specified for the installation under the door. The grates have a perfect surface finishing. They are treated by pasivation and brushed to the silk gloss. All the ShowerDrain C gratings are silk gloss gratings. The silk gloss gives a smooth surface with a semi gloss finish. The ShowerDrain C gratings are therefore easy to maintain as water and soap residues can be easily removed. Gratings in three parts When is the shower channel located at the shower door, the channel has limited access because of the shower door hinge/frame part. For this application, some of the ACO ShowerDrain C can be supplied with a 3-piece grating. This enables installation of the channel under the door, whilst it is still possible to remove (the middle part of) the grating for cleaning. The stainless steel ShowerDrain C gratings have an unique shape in which the middle part of the grating is lower than the edges. This reduces the risk of overshooting of water significantly. 35
ACO ShowerDrain C The linear solution with horizontal flange Article description drainage channel DN 50 for the shower area, suitable for all push-fit pipe socket systems installation height: 92 mm (50 mm FAT) or 65 mm (30 mm FAT) stainless steel channel and grating tested according to DIN EN 1253: flow rate 0.95 l/s, flow rate at entrance of shower: 0.5 l/s, flow rate against the wall: 0.8 l/s channel width: 70 mm channel body with lateral slope removable foul air trap seal of polypropylene brushed silk gloss gratings surrounding, integral thin bed flange Product advantages welded stainless steel body, no risk of leakage low construction height very suitable for renovation easy removed and cleaned foul air trap, full access to the outlet pipe unique profile of gratings reduces overshooting of water (Patent pending) H H = 92 mm with standard FAT (foul air trap height 50 mm) H = 65 mm with lower FAT (foul air trap height 30 mm) Installation dimensions (mm) 585 685 785 885 985 1085 1185 (mm) 645 745 5 945 1045 1145 1245 156 130 70 198 130 70 Ø50 92 60 Ø50 65 40 13 13 36 Installation with thin bed flange Low installation with thin bed flange
ACO ShowerDrain C Order data Channel with grating Length (mm) 585 685 785 885 985 1085 1185 Height H (mm) Wave Square one part Square three part Grating Water Slot one part Slot three part Tile, height max.: 10 mm 92 4044 404492 404500 406452 403798 403806 408651 65 406954 406275 407694 406283 406204 407701 408672 92 404485 404493 404501 406453 403799 403807 408652 65 406955 406276 407695 4062 406205 407702 408673 92 404486 404494 404502 406454 403800 403808 408653 65 406956 406277 407696 406285 406206 407703 408674 92 404487 404495 404503 406455 403801 403809 408654 65 406957 406278 407697 406286 406207 407704 408675 92 404488 404496 404504 406456 403802 403810 408655 65 406958 406279 407698 406287 406208 407705 408676 92 404489 404497 404505 406457 403803 403811 408656 65 406959 406280 407699 406288 406209 407706 408677 92 404490 404498 404506 406458 403804 403812 408657 65 406960 406281 407700 406289 406210 407707 408678 37
ACO ShowerDrain C The linear solution with vertical flange Article description drainage channel DN 50 for the shower area, suitable for all push-fit pipe socket systems installation height: 92 mm (50 mm FAT) or 65 mm (30 mm FAT) stainless steel channel and grating tested according to DIN EN 1253: flow rate 0.95 l/s, flow rate at entrance of shower: 0.5 l/s, flow rate against the wall: 0.8 l/s channel width: 70 mm channel body with lateral slope removable foul air trap of polypropylene brushed silk gloss gratings surrounding, integral thin bed flange, vertical flange on rear Product advantages welded stainless steel body, no risk of leakage low construction height very suitable for renovation easy removed and cleaned foul air trap, full access to the outlet pipe unique profile of gratings reduces overshooting of water (Patent pending) vertical flange provides additional safety against leakage problems at the sensitive wall-to-floor joint H H = 92 mm with standard FAT (foul air trap height 50 mm) H = 65 mm with lower FAT (foul air trap height 30 mm) Installation dimensions (mm) 585 685 785 885 985 1085 1185 (mm) 645 745 5 945 1045 1145 1245 13 137 112 67 13 179 112 67 Ø50 92 60 Ø50 65 40 13 20 13 20 38 Installation with vertical flange Low installation with vertical flange
ACO ShowerDrain C Order data Channel with grating Length (mm) 585 685 785 885 985 1085 1185 Height H (mm) Wave Square one part Square three part Grating Water Slot one part Slot three part Tile, height max.: 10 mm 92 407908 407659 407666 407673 407680 407687 408665 65 407715 407722 407729 407736 407743 407750 408686 92 407923 407660 407667 407674 407681 407688 408666 65 407716 407723 407730 407737 407744 407751 408687 92 407915 407661 407668 407675 407682 407689 408667 65 407717 407724 407731 407738 407745 407752 408688 92 407655 407662 407669 407676 407683 407690 408668 65 407718 407725 407732 407739 407746 407753 408689 92 407656 407663 407670 407677 4076 407691 408669 65 407719 407726 407733 407740 407747 407754 408690 92 407657 407664 407671 407678 407685 407692 408670 65 407720 407727 407734 407741 407748 407755 408691 92 407658 407665 407672 407679 407686 407693 408671 65 407721 407728 407735 407742 407749 407756 408692 39
ACO ShowerDrain C The linear solution without flange Article description drainage channel DN 50 for the shower area, suitable for all push-fit pipe socket systems installation height: 92 mm (50 mm FAT) or 65 mm (30 mm FAT) stainless steel channel and grating tested according to DIN EN 1253: flow rate 0.95 l/s, flow rate at entrance of shower: 0.5 l/s, flow rate against the wall: 0.8 l/s channel width: 70 mm channel body with lateral slope removable foul air trap of polypropylene brushed silk gloss gratings Product advantages welded stainless steel body, no risk of leakage low construction height very suitable for renovation easy removed and cleaned foul air trap, full access to the outlet pipe unique profile of gratings reduces overshooting of water (Patent pending) H H = 92 mm with standard FAT (foul air trap height 50 mm) H = 65 mm with lower FAT (foul air trap height 30 mm) Installation dimensions (mm) 585 685 785 885 985 1085 1185 70 126 70 165 Ø50 87 92 60 Ø50 65 40 Installation without flange Low installation without flange 40
ACO ShowerDrain C Order data Channel with grating Length (mm) 585 685 785 885 985 1085 1185 Height H (mm) Wave Square one part Square three part Grating Water Slot one part Slot three part Tile, height max.: 10 mm 92 406181 404508 404516 406460 402739 403781 408658 65 406173 406468 407708 406299 405751 405743 408679 92 406182 404509 404517 406461 402740 403782 408659 65 406174 406469 407709 406300 405752 405744 408680 92 406183 404510 404518 406462 402741 403783 408660 65 406175 406470 407710 406301 405753 405745 408681 92 4061 404511 404519 406463 402742 4037 408661 65 406176 406471 407711 406302 405754 405746 408682 92 406185 404512 404520 406464 402743 403785 408662 65 406177 406472 407712 406303 405755 405747 408683 92 406186 404513 404521 406465 402744 403786 408663 65 406178 406473 407713 406304 405756 405748 4086 92 406187 404514 404522 406466 402745 403787 408664 65 406179 406474 407714 406305 405757 405749 408685 41
ACO ShowerDrain C The linear solution without foul air trap Article description drainage channel DN 50 for the shower area, suitable for all push-fit pipe socket systems installation height: 18 mm* stainless steel channel and grating tested according to DIN EN 1253: flow rate 1.5 l/s, flow rate at entrance of shower: 0.5 l/s, flow rate against the wall: 1.0 l/s channel width: 70 mm channel body with lateral slope brushed silk gloss gratings surrounding, integral flange is optional Product advantages welded stainless steel body, no risk of leakage low construction height very suitable for renovation full access to the outlet pipe high flow rate unique profile of gratings reduces overshooting of water (Patent pending) 18 Installation dimensions (mm) 585 685 785 885 985 1085 1185 (mm) 645 745 5 945 1045 1145 1245 130 70 13 18 70 78.5 18 78.5 Ø50 Ø50 42 Low installation with flange *Please note: A foul air trap has to be installed somewhere else in the pipe system Low installation without flange
ACO ShowerDrain C Order data Channel with grating Length (mm) 585 685 785 885 985 1085 1185 Flange Wave Square one part Square three part Grating Water Slot one part Slot three part Tile, height max.: 10 mm with 407757 407764 407771 407778 407785 407792 408693 without 407799 407806 407814 407821 407828 407835 408700 with 407758 407765 407772 407779 407786 407793 408694 without 407800 407807 407815 407822 407829 407836 408701 with 407759 407766 407773 407780 407787 407794 408695 without 407801 407808 407816 407823 407830 407837 408702 with 407760 407767 407774 407781 407788 407795 408696 without 407802 407809 407817 407824 407831 407838 408703 with 407761 407768 407775 407782 407789 407796 408697 without 407803 407810 407818 407825 407832 407839 408704 with 407762 407769 407776 407783 407790 407797 408698 without 407804 407812 407819 407826 407833 4070 408705 with 407763 407770 407777 4077 407791 407798 408699 without 407805 407813 407820 407827 407834 4071 408706 43
ACO ShowerDrain F ACO ShowerDrain F flexible installation The new ACO ShowerDrain F range consists of two parts. The first part of the shower drain is the gully body with foul air trap. This is equipped with a flange, enabling reliable connection with the waterproof membrane by screwing. The second part is the channel itself and the grate, which is only 8 mm high. The main advantage of the ACO ShowerDrain F range is the channel with the grate of the same height as the tiles. Like that the channel position can be chosen when tiles are already being laid. There is a 10 mm tolerance of the channel vs. the gully in all four directions. The same as ACO ShowerDrain C also the range F has a high flow rate, a very low construction height and easy maintenance. The base is stainless steel, used for production of the shower drain, the gully and the grate. The foul air trap is made from plastics. Stainless steel parts have been finished with pickle passivating; grates have been silk gloss brushed. Two part solution The ACO ShowerDrain F shower channel with low installation height and foul air trap Page 46 44
ACO ShowerDrain F Variability of shower drain location The ACO ShowerDrain F is only 8 mm high. It is the same height as or lower than most standard floor tiles. It is installed together with tiles laying, after floor insulation. That enables a relatively big variability of the shower drain body positioning, i.e. up to 10 mm or maximum 3 in all directions. Due to this fact the complicated measuring and tiles layout counting and consequent tiles cutting are avoided. The final appearance is always perfect. Low construction height The ACO ShowerDrain F construction height in its standard version (50 mm water column in the odour trap) is only 87 mm. The building height of the lowered version (30 mm water column in the odour trap) is the incredible 67 mm. These values enable very wide application of ACO ShowerDrain F in the most modern new buildings and during ambitious reconstructions. Easy maintenance The user s comfort is increased by the efficiency of the foul air trap and its easy cleaning. Syphon (foul air trap) is made out of plastics. The reliable seal is injection-moulded together with the foul air trap. Due to this construction, there is no risk of losing of the sealing, or another malfunction. The foul air trap can be easily removed from the shower channel. It is easy to disassamble it into two separate parts and clean it by hand or in a dish washer. All the ShowerDrain F gratings are silk gloss gratings. The silk gloss gives a smooth surface with a semi gloss finish. The ShowerDrain F gratings are therefore easy to maintain as water and soap residues can be easily removed ACO ShowerDrain F versions The shower drain is made in the width 100 mm in four lengths 685 mm, 785 mm, 885 mm and 985 mm in two versions of gullies: standard height (50 mm FAT) low height (30 mm FAT) The product range has four elegant stainless steel gratings in a one-piece or three-piece version. The three-piece gratings are designed for installation under a door. The gratings have a perfect surface finishing. They are pickled and silk gloss brushed. 45
ACO ShowerDrain F The linear solution without flange Article description two part shower channel system, gully body can be installed separately from channel stainless steel channel, gully and grating gully provided with screwed 3 mm clamping flange for water proofing seal drainage channel with vertical outlet DN 50 for the shower area, suitable for all push-fit pipe socket systems installation height for gully: 79 mm (50 mm FAT) or 54 mm (30 mm FAT) height of channel with grating: 8mm tested according to DIN EN 1253: flow rate 0.95 l/s, flow rate at entrance of shower: 0.4 l/s, flow rate against the wall: 0.75 l/s channel width: 100 mm removable foul air trap of polypropylene silk gloss brushed grates and channel Product advantages welded stainless steel body, no risk of leakage low construction height very suitable for renovation easy removed and cleaned foul air trap, full access to the outlet pipe unique profile of gratings reduces overshooting of water (Patent pending) Installation dimensions (mm) 685 785 885 985 100 80 100 80 8 167 174 Ø50 79 47 54 8 167 216 Ø50 29 Installation without flange Low installation without flange 46
ACO ShowerDrain F Order data Channel with grating Length (mm) Height H (mm) Wave Square one part Square three part Grating Water Slot one part Slot three part 685 8 4072 4076 4079 407853 407857 407861 785 8 4073 4077 407850 407854 407858 407862 885 8 4074 4078 407851 407855 407859 407863 985 8 4075 407907 407852 407856 407860 407864 Order data Gully body Gully body Height H (mm) Length (mm) Width (mm) Art. no. Standard version 79 312 167 407969 Low version 59 312 167 407970 47
48
ACO ShowerDrain bath drains ACO ShowerDrain bath drains the design solution for point drainage The ACO bathroom drains are used in areas where efficient function has to be combined with stylish looks. A choice of round and square design gratings is available. They are all made of high quality electro-polished stainless steel, and come in lockable and non-lockable versions. Lockable gratings can be used in areas open to the public such as wellness facilities and swimming pools. Top sections with your choice of surface or tile-covered surface Top sections to match glass, tile or similar surfaces are also available. ACO offers a selection of top sections with elegant designs in glass. The top section which can be tiled is covered on-site with your floor-covering, e.g. the tiles you are using throughout the bath area. This means that the whole floor area has a uniform look. The depth available for the tiles, including adhesive, is 11.5 mm. With both types of top section the water runs away through the surrounding slots around the top section. Another available option is the variant for thin bed flange. Glass surface Tile-covered surface 49
ACO ShowerDrain bath drains Top section for in situ tile covering The top section is also available with optional surface. The top section is tiled locally with a floor covering, e. g. your tile which is used throughout the entire bathroom. The floor image is thus not discontinued, drainage of wastewater is carried out via the surrounding cover slots. The max permissible tile height incl. file adhesive is 11.5 mm. Naturally, the version with optional surface is also available for the thin bed sealing. Thin bed sealing To avoid damages to the basic structure of a building, a reliable sealing of the shower cannot be dispensed with. ACO top sections are also available for the thin bed sealing. An enclosed thin bed fleece simplifies the safe connection of the thin bed sealing to the sealing flange. Floor tile Tile adhesive Thin bed sealing Thin bed flange Grating Top section Flexible joint Floor screed Insulation Detail of thin bed sealing ACO Easyflow plastic floor drains ACO Easyflow gullies offer a handy modular system: where floor drains can be combined, depending on the individual requirement, with various top sections in angular or round shape optionally with or without thin bed flange. Thanks to the modular system, perfectly aligned functional solutions for customised installation situations and application areas can be realised. ACO Easyflow floor drains are used in all private wet rooms and offer in connection with relevant sealings a drainage option which is safe and efficient at the same time. ACO plastic floor drains with top sections and stainless steel design gratings 50 Optimum cleaning option ACO Easyflow floor drains also satisfy as far as hygiene is concerned. The foul air trap can be taken out completely just by turning slightly and pulling afterwards. Then, an optimum pipe cleaning is possible. As the drains do not have any reductions at inlet and outlet, this drain system offers an optimum revision opening. In addition, the drain body is emptied completely by the flush-with-floor arrangement of the drain socket and the flushing out of foreign bodies is made easier. The foul air trap can be taken out easily
ACO ShowerDrain bath drains Modular system Design gratings Tileable surface Glass grating Round top section Square top section Tileable top section Top section for customer choice of surface Round top section with thin bed flange Square top section with thin bed flange Tileable top section with thin bed flange Top section for customer choice of surface with thin bed flange Extension Compression-sealing flange ACO Easyflow plastic floor drains 51
ACO ShowerDrain bath drains Design Grating for bath drains Order data Round design gratings Order data Square design gratings Art. no. Design Art. no. loosely applied Art. no. lockable Design 5141.25.26 5141.20.26 5141.21.26 Forest Forest 5141.25.29 5141.20.29 5141.21.29 Hawaii Hawaii 5141.25.30 5141.20.30 5141.21.30 Mix Mix 5141.25.22 5141.08.22 5141.21.22 Quadrato Quadrato 5141.25.28 5141.08.28 5141.21.28 Wave Wave Every square design grating is also available as lockable version 52
ACO ShowerDrain bath drains The design grating can be unlocked with a disk/coin The grating lifts up on its own very easily The design grating can be taken out easily Article description ACO stainless steel design grating electro-polished surface grating loosely applied in round design for insertion in top sections without grating for retrofitting of top sections with frame dimension Ø 136 mm load class K 3 suitable for barefoot area weight 0.6 kg Article description ACO stainless steel design grating electro-polished surface grating lockable/loosely applied in square design for insertion in top sections without grating for retrofitting of top sections with frame dimension 149 x 149 mm load class K 3 suitable for barefoot area weight 0.6 kg Lightpoint illumination for bath drains Article description illumination kit for point drainage suitable for stainless steel design gratings with integrated switch control, for contact-free On and Off function consists of: rechargeable LED illumination module and recharger with 230 V connection LED illuminated module suitable for underwater use Order data Lightpoint Designation Design Art. no. Lightpoint illumination kit for top sections (1 illuminated module and 1 recharger 230 V connection Red 9010.89.10 Blue 9010.89.11 Green 9010.89.12 Warmwhite 9010.89.13 Lightpoint single module Red 9010.89.15 Blue 9010.89.16 Green 9010.89.17 Warmwhite 9010.89.18 Illumination kit Single module 53
ACO ShowerDrain bath drains Glass grating Article description designer grating made of single pane safety glass to be used with top sections for customer selected surfaces with surrounding drainage slots K3 load class suitable for barefoot areas square frame dimensions 127.5 mm, with surrounding bevelled edge weight 0.6 kg Crystal clear design advantage With glass gratings, the shower floor is drained via the surrounding slot which funnels the water into the drain. The glass gratings can be easily removed and as easily cleaned. Order data Glass grating incl. support system Design Designation Art. no. Glass, black 5141.38.01 Glass, white 5141.38.02 Glass, grey 5141.38.03 Glass, black with floral sand blasting 5141.38.04 Glass, white with floral design in black 5141.38.05 54
ACO ShowerDrain bath drains Top section Order data Round and square top section with standard grating Product illustration Dimensional drawing Designation Art. no. 149 16 Plastic top section, material ABS, with slot grating, non-lockable 150 Height adjustability from 20 to 135 mm when combined with plastic drain bodies 5141.22.00 Ø125 150 149 16 Plastic top section, material ABS, with slot grating, lockable Height adjustability from 20 to 135 mm when combined with plastic drain bodies 5141.23.00 Ø125 150 Ø136 Plastic top section, material ABS, with slot grating Height adjustability from 8 to 135 mm when combined with plastic drain bodies 5141.25.00 Ø125 Order data Round and square top section with standard grating and thin bed flange Produktabbildung Dimensional drawing Designation Art. no. 38 10 13 Ø350 Ø252 149 Plastic top section, material ABS, with slot grating, non-lockable, with seal sleeve to connect to thin bed seals 5141.29.00 150 Ø125 Height adjustability from 38 to 136 mm when combined with plastic drain bodies 150 38 10 13 Ø350 Ø252 149 Plastic top section, material ABS, with slot grating, lockable, with seal sleeve to connect to thin bed seals Height adjustability from 38 to 136 mm when combined with plastic drain bodies 5141.30.00 Ø125 150 38 8 12 Ø350 Ø252 Ø136 Plastic top section, material ABS, with slot grating, with seal sleeve to connect to thin bed seals Height adjustability from 38 to 136 mm when combined with plastic drain bodies 5141.32.00 Ø125 55
ACO ShowerDrain bath drains Round and square design gratings on page 52 Order data Round and square top section for design grating Product illustration Dimensional drawing Designation Art. no. 150 Ø136 Plastic top section, material ABS, for round design gratings Height adjustability from 8 to 135 mm when combined with Easyflow gully bodies 5141.46.00 Ø125 150 38 8 12 Ø350 Ø252 Ø136 Plastic top section, material ABS, for round design gratings, with seal sleeve to connect to thin bed seals Height adjustability from 38 to 136 mm when combined with Easyflow gully bodies 5141.42.00 Ø125 150 149 Plastic top section, material ABS, for standard or lockable design gratings Height adjustability from 20 to 135 mm when combined with Easyflow gully bodies 5141.43.00 Ø125 150 38 10 13 Ø350 Ø252 149 Plastic top section, material ABS, for standard or lockable design gratings, with seal sleeve to connect to thin bed seals Height adjustability from 38 to 136 mm when combined with Easyflow gully bodies 5141.48.00 Ø125 Order data Top section with tileable surface Product illustration Dimensional drawing Designation Art. no. 150 25 12 149 121 Plastic top section, material ABS, for in situ tiling (11.5 mm incl. tile adhesive) Height adjustability from 26 to 135 mm when combined with plastic drain bodies 5141.24.00 Ø125 150 38 24 27 Ø350 Ø252 149 121 Plastic top section, material ABS, for in situ tiling (11.5 mm incl. tile adhesive), with seal sleeve to connect to thin bed seals Height adjustability from 38 to 136 mm when combined with plastic drain bodies 5141.31.00 56 Ø125
ACO ShowerDrain bath drains Glass gratings on page 54 Order data Top section for glass grating Product illustration Dimensional drawing Designation Art. no. 150 25 149 Plastic top section, material ABS, for customer choice of surface, for insertion of glass cover Height adjustability from 26 to 135 mm when combined with plastic drain bodies 5141.38.00 Ø125 150 38 24 27 Ø350 Ø252 149 Plastic top section, material ABS, for customer choice of surface, for insertion of glass cover, with seal sleeve to connect to thin bed seals Height adjustability from 38 to 136 mm when combined with plastic drain bodies 5141.37.00 Ø125 57
ACO ShowerDrain bath drains Easyflow gully bodies for bath drainage Article description gully bodies DN 50 for the shower area, suitable for push-fit pipe sockets with vertical or horizontal outlet of plastics tested according to DIN EN 1253 removable foul air trap of plastics ready for installation with top section and design grating optionally with lateral inlet DN 50 Thin bed sealing In wet areas it is absolutely necessary to lay compound sealant directly below the tile layer to prevent damage to the construction material below this due to water seepage. For this kind of installation ACO offers a top section with a thin bed sleeve to connect to thin bed seals. This means there is a secure join between the top section and the thin bed seal and so the underlying floor material is not at risk of wetting. Product advantages Bodies can be easily equipped with an optional compression sealing flange at site All available top sections are height-adjustable, including also the thin-bed top sections The foul air trap can be easily removed and cleaned Installation example Tiles with adhesive Thin bed sealing Screed Insulation Concrete 58
ACO ShowerDrain bath drains Order data Easyflow gully bodies Designation Art. no. Dimensional drawing Product illustration Horizontal outlet, foul air trap with 50 mm water seal, flow rate 1.5 l/s 2500.05.00 102 DN 50 Horizontal outlet, with lateral inlet DN 50, foul air trap with 50 mm water seal, flow rate 1.5 l/s 2500.00.00 102 DN 50 Ø149 Ø125 DN 50 231 Vertical outlet, foul air trap with 50 mm water seal, flow rate 1.6 l/s 2500.55.00 167 114 Ø149 Ø125 DN 50 Horizontal outlet, foul air trap with 30 mm water seal, flow rate 0.8 l/s 2505.05.00 82 Ø149 Ø125 30 DN 50 194 Horizontal outlet, with lateral inlet DN 50, foul air trap with 50 mm water seal, flow rate 0.8 l/s 2505.00.00 82 DN 50 Ø149 Ø125 30 DN 50 231 Compression sealing flange for Easyflow gully bodies 2040.00.02 Extension element for Easyflow gully bodies 17 2040.00.00 178 Ø125 59
Showerboard Plastic flange with sealing 55 Article description ready-to-install shower bottom of hard foam for drain bodies DN 50 coated with water-impermeable fleece ready-to-tile for flush-with-floor tile covering fleece overlapping (70 mm) for the safe sealing of floor and wall transitions ready-made slope of 2 % to central floor drain accessible with wheel chair as from tile size: 50 x 50 mm H X min. H Substructure element (optionally available) L L Integrated, screwed floor drain from the bath drain range Vliesüberstand umlaufend 70 mm Fleece projection Vliesüberstand surrounding umlaufend 70 70 mm mm 55 Showerboard mit Ablaufkörper DN50 1,5 Showerboard 30 mm mit Geruchverschluss Ablaufkörper bestehend DN50 aus 1,5 Showerboard 30 mm und Geruchverschluss Unterbauelement 55 mm bestehend aus Showerboard und Unterbauelement 55 mm Showerboard with drain body DN 50, 1.5 inclination, 30 mm foul air trap, substructure element 55 mm H X min. H H 20 55 X min. H 55 55 20 55 20 Y min. Showerboard mit Ablaufkörper DN50 1,5 Showerboard 50 mm mit Geruchverschluss Ablaufkörper bestehend DN50 aus 1,5 Showerboard Showerboard Showerboard with drain body mit DN 50, 1.5 inclination, 50 mm und Geruchverschluss Unterbauelemente 50 mm bestehend foul 55 air trap, mm aus + Showerboard 20 mm substructure und Unterbauelemente elements 55 mm + 20 mm 55 mm + 20 mm H Y min. Installation dimensions Showerboard 55 20 60 55 20 H Z min. Showerboard with drain body DN 50, 90 inclination, 50 mm foul Showerboard air trap, mit substructure Ablaufkörper elements 55 mm DN50 + 20 90 mm Showerboard 50 mm mit Geruchverschluss Ablaufkörper bestehend DN50 aus 90 Showerboard 50 mm und Geruchverschluss Unterbauelemente bestehend 55 mm aus +20 Showerboard mm Z min. L (mm) X (mm) Y (mm) Z (mm) H (mm) 500 x 500 91 111 111 7 800 x 800 93 113 113 7 900 x 900 95 115 115 7 1000 x 1000 97 117 117 7 1200 x 1200 100 120 120 7
ACO ShowerDrain bath drains Order data Showerboard with bath drain Designation Design (mm) Art. no. Product illustration ACO Showerboard for spot drainage ACO substructure element for ACO Showerboard (two-part, total height 75 mm) Plastic drain body, top frame with slotted grating, 1.5 inclination, water trap height 50 mm, installation height 115 mm, H* = 7 mm (min.) 500 x 500 620395 800 x 800 620396 900 x 900 620397 1000 x 1000 620398 1200 x 1200 620399 500 x 500 620400 800 x 800 620401 900 x 900 620402 1000 x 1000 620403 1200 x 1200 620404 DN 50 620392 Plastic drain body, top frame with slotted grating, 90 inclination, water trap height 50 mm, installation height from 115 mm, H* = 7 mm (min.) DN 50 620393 Plastic drain body, top frame with slotted grating, 1.5 inclination, water trap height 30 mm, installation height 95 mm, H* = 7 mm (min.) DN 50 620394 Stainless steel frame for insertion of a square design grating in one of above drain bodies H* = 19 mm (min.) 620475 Round and square design gratings on page 52 Stainless steel frame for insertion of a round design grating in one of above drain bodies H* = 10 mm (min.) Top section for optional surface, tileable, for insertion in one of above drain bodies H* = 26 mm (min.) 620476 620477 Top section for glass gratings, or insertion in one of above drain bodies 620495 Glass gratings on page 54 Height adjustment ring for insertion of floor coverings with higher structure H* = 6 mm (min.) 5141.30.15 61 * H: Refer to dimension in drawing on page 60
ACO ShowerDrain bath drains Wal-Selecta cast iron gully bodies for bath drainage Wal-Selecta floor drains are made of cast iron with graphite flakes pursuant to DIN 1691. This is an iron-carbon alloy in which the carbon is incorporated within the metallic ground mass in the form of flakes. This graphite lattice gives the cast iron its superb corrosion resistance. This special cast iron therefore has an excellent track record in drainage applications. Fire protection with Wal-Selecta The topic preventive fire protection in the floor drain area is of central interest. Especially when installing such drains in buildings of particular type and use, e. g. hotels, hospitals, old people's homes or schools, the relevant fire resistance class of ceiling or floor has to be observed in accordance with state building regulations. Wal-Selecta floor drains with vertical drain socket comply with fire resistance classes R 30 to R 120 if fire protection foul air traps are used together with fire protection cartridges. Here, double protection is guaranteed: fire protection is guaranteed in the case of fire coming from below as well as from above. Here, ACO offer the right solution for each application with the Wal-Selecta range. As unique system provider, ACO have tested their floor drains successfully from above as well as from below. The testing was carried out as per DIN 4102. Leaflets on fire protection can be downloaded under www.aco-haustechnik.de in Service/Leaflets path Double safety in the case of fire. Wal-Selecta floor drain with fire protection insert Standards and certification All ACO Building Services Wal-Selecta cast iron floor drains are manufactured pursuant to DIN EN 1253 and DIN 19599. The whole of the Wal-Selecta floor drain product line in non-flammable cast iron has also been tested pursuant to DIN 4102 specifications, and is certified in accordance with the authorisation regulations for fire resistance classes R 30 to R 120. The floor drains with horizontal outlet sockets are certified by MPA NRTW, Erwitte office, and issued with General Building Supervisory Authority Test Certificate No. P-MPA-E-02-005. ACO Building Services has received General Building Supervisory Authority Authorisation No. Z-19.17.1527 for the floor drains with vertical outlet sockets. 62
ACO ShowerDrain bath drains Order data Wal-Selecta cast iron drain bodies Designation Art. no. Dimensional drawing Product illustration Cast iron drain body DN 50, inclination 1.5 as per DIN EN 1253 With adhering flange and removable foul air trap for water trap height of 50 mm, flow rate 1.0 l/s 5125.80.00 134 3 50 345 145 150 106 1.5 Cast iron drain body DN 50, inclination 1.5 as per DIN EN 1253 With compression-sealing flange and removable foul air trap for water trap height of 50 mm, flow rate 1.0 l/s 5128.90.00 134 3 50 345 145 150 1.5 106 Cast iron drain body DN 50, inclination 90 as per DIN EN 1253 With adhering flange and removable foul air trap for water trap height of 50 mm, flow rate 1.0 l/s 5125.60.00 195 3 50 68 345 145 Cast iron drain body DN 50, inclination 90 as per DIN EN 1253 With compression-sealing flange and removable foul air trap for water trap height of 50 mm, flow rate 1.0 l/s 5128.60.00 195 3 50 68 345 145 Fire protection cartridge fire resistance class DN 50, R 30 to R 120 Fire protection equipment for floor drains 90 with ALL PURPOSE foul air trap, flow rate 0.8 l/s 5150.10.17 Top sections on page 55 Design gratings on page 52 63
ACO ShowerDrain EG 150 ACO ShowerDrain EG 150 stainless steel gullies The ACO ShowerDrain EG 150 gully series offers various advantages for a wide range of applications. The gullies can be used for construction and renovation of single-family houses just as well as in public buildings. Installation is possible in shower areas, bath rooms and several other areas, where drainage has to be fulfilled via gullies with smooth surface and excellent material properties. The ACO ShowerDrain EG 150 gullies are available to all the floor types including the cement and resin cast floors, ceramic paving and elastic vinyl floor covering. The ShowerDrain EG 150 gullies are also available with back inlets. For cementitious/resin screed and tile applications Page 66 For damp proof membrane bonding Page 68 For vinyl sheet flooring Page 69 64
ACO ShowerDrain EG 150 65
ACO ShowerDrain EG 150 ACO ShowerDrain EG 150 gullies Article description gully DN 32, 50 or 75 suitable for all push fit pipe socket systems top sections can be rotated and telescopically height adjusted for easy levelling with finished floor stainless steel gully body, grating and foul air trap flow rate tested to EN 1253 top dimensions 150 x 150 mm brushed silk gloss grating with locking available with lateral inlets DN 32 and DN 40 Product advantages flexible installation due to rotatable and adjustable top section suitable for public area s due to locked grating removable foul air trap for easy cleaning and maintenance available with vinyl sheet flooring Compact design ideal for reconstruction Lateral inlets (options) for three additional connections Gratings with silk gloss ideal for shower areas Installation example Tiles with adhesive Thin bed sealing Screed 66 Concrete
ACO ShowerDrain EG 150 Order data EG 150 gullies Designation Art. no. Dimensional drawing Product illustration Horizontal outlet, with heightadjustable top section and grating 150 mm, foul air trap with 50 mm water seal, flow rate 1.2 l/s 120-155 14-49 6 150 x 150 70 Outlet DN 50 405151 139 Ø50 Vertical outlet, with height-adjustable top section and grating 150 mm, foul air trap with 50 mm water seal, flow rate 1.2 l/s 190-225 6 129-164 10-49 150 x 150 6 Outlet DN 50 405149 Ø 50 Ø 132 Horizontal outlet, with heightadjustable top section and grating 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40 under FAT, flow rate 1.2 l/s 120-150 60 6-43 6 150 x 150 70 Outlet DN 50 405153 DN 32/40 139 Ø 50 Horizontal outlet, with heightadjustable top section and grating 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40, flow rate 1.2 l/s 215-250 83-118 14-49 DN 32/40 150 x 150 167 Outlet DN 50 405152 137 Ø 50 Vertical outlet, with height-adjustable top section and grating 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40, flow rate 1.2 l/s 215-250 70-106 10-49 DN 32/40 150 x 150 6 Outlet DN 50 405150 Ø 50 Ø 110 Horizontal outlet DN 32, with grating 150 mm flow rate 0.75 l/s, without foul air trap, fixed height 52 6 150 x 150 Ø 32 Outlet DN 32 400791 105 67
6 6 15.0000 ACO ShowerDrain EG 150 Order data EG 150 gullies for damp roof membrane applications* Designation Art. no. Dimensional drawing Product illustration Horizontal outlet, with heightadjustable top section and grating 150 mm, foul air trap with 50 mm water seal, flow rate 1.2 l/s Outlet DN 50 405156 120-160 112-127 6-30 Ø 250 150 x 150 6 139 Ø 50 70 Vertical outlet, with height-adjustable top section and grating 150 mm, foul air trap with 50 mm water seal, flow rate 1.2 l/s Outlet DN 50 405154 188-228 125-155 6-30 6 Ø 250 150 x 150 Ø 50 Ø 132 Horizontal outlet, with heightadjustable top section and grating 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40 under FAT, flow rate 1.2 l/s Outlet DN 50 405158 120-160 112-137 65-80 6-30 60 DN 32/40 Ø 250 150 x 150 139 6 Ø 50 12-51 70 Horizontal outlet, with heightadjustable top section and grating 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40, flow rate 1.2 l/s Outlet DN 50 405157 213-272 6-50 75-90 DN 32/40 Ø 250 150 x 150 166 Ø 50 137 Vertical outlet, with height-adjustable top section and grating 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40, flow rate 1.2 l/s 211-252 276-312 71-107 6-30 DN 32/40 Ø 250 150 x 150 6 Outlet DN 50 405155 Ø 50 Ø 110 68 Horizontal outlet with heightadjustable top section and with grating 150 mm flow rate 0.75 l/s, without foul air trap, suitable for seepage water Outlet DN 32 400793 62-72 6-20 Ø 250 150 x 150 105 Ø 32 * not suitable for seepage water, except article number 400793
ACO ShowerDrain EG 150 Order data EG 150 gullies with clamping flange for vinyl sheet flooring applications Designation Art. no. Dimensional drawing Product illustration Horizontal outlet, with heightadjustable top section and grating Ø 150 mm, foul air trap with 50 mm water seal, flow rate 1.2 l/s 126-156 18-50 Ø 225 Ø 157 70 Outlet DN 50 405145 139 Ø 50 Vertical outlet, with height-adjustable top section and grating Ø 150 mm, foul air trap with 50 mm water seal, flow rate 1.2 l/s Outlet DN 50 405143 196-231 18-50 Ø 225 Ø 157 Horizontal outlet, with heightadjustable top section and grating Ø 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40 under FAT, flow rate 1.2 l/s Outlet DN 50 405147 127-162 60 18-50 Ø 50 Ø 132 Ø225 Ø157 DN 32/40 139 Ø50 70 Horizontal outlet, with heightadjustable top section and grating Ø 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40, flow rate 1.2 l/s Outlet DN 50 405146 220-250 69 18-50 DN 32/40 Ø 225 Ø 157 166 137 Ø 50 Vertical outlet, with height-adjustable top section and grating Ø 150 mm, foul air trap with 50 mm water seal, with three lateral inlets DN 32/40, flow rate 1.2 l/s Outlet DN 50 405144 (285-320) (224-259) 57 18-50 DN 32/40 Ø 225 Ø 157 Ø 50 Ø 110 69
ACO ShowerDrain FG ACO ShowerDrain FG gullies FG gullies are simple and robust gullies from stainless steel. Their minimalistic design and blasted surfaces make them very suitable for contemporary design bathrooms The robust body and massive upper surface and stainless steel foul air trap guarantee a problem free long term operation. The low height of the gully body makes the FG gullies suitable for both new construction and renovation. FG gullies are available in dimensions 100 x 100 mm, 150 x 150 mm, 200 x 200 mm as well as Ø 110 mm, especially for resin floors. All FG gullies have foul air trap with water trap of 50 mm according to EN 1253 and lockable versions are available for public areas. FG gullies the versions Standard version Version with flange for waterproofing membrane Round version for resin floors Installation example Tiles with adhesive Thin bed sealing Screed 70 Concrete