MATERIAL SAFETY DATA SHEET WYNN'S PROFESSIONAL PRODUCTS AUTOMATIC TRANSMISSION FLUSH

Similar documents
MATERIAL SAFETY DATA SHEET Wynn s Transformer AT Automatic Transmission Fluid

MATERIAL SAFETY DATA SHEET Wynn's Professional Products Fifty +Plus+

SAFETY DATA SHEET Wynn's E.P. Multi-Purpose Grease No. 2

Material Safety Data Sheet Whisk Hand Cleaner 200. Page 1 Whisk Products, Inc. Revised: November 24, 2014

MATERIAL SAFETY DATA SHEET TRIM RP 08F. Rust preventative and water displacer. MASTER CHEMICAL CORPORATION 501 West Boundary Perrysburg, OH

Material Safety Data Sheet RUST VETO 4214-W

Material Safety Data Sheet 24 HR. CHEMTREC EMERGENCY #: (OUTSIDE THE U.S. & CANADA: )

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

NAPCO CHEMICAL COMPANY, INC. Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

Section 1 - Identification of Product. Health: 2 Least 0 Flammability: 3 Slight 1 Reactivity: 0 Moderate 2 High 3 Extreme 4

U.S. SAFETY DATA SHEET Howes Lubricator Diesel Treat Page 1 of 6

Version /27/2006

MATERIAL SAFETY DATA SHEET TRIM CLEAN 2029HW. Removal of metalworking fluids from machine tools and parts

Safety Data Sheet. 1 - Identification

Material Safety Data Sheet

Safety Data Sheet. CAS Number Ingredient Name Weight % <20% Water. : Remove to fresh air. Seek medical attention if irritation persists.

Material Safety Data Sheet

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

*MATERIAL SAFETY DATA SHEET*

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

MATERIAL SAFETY DATA SHEET TRIM CLEAN F2. Water miscible washing compound concentrate

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Page Number:

GAF Safety Data Sheet SDS # 2098A SDS Date: December 2014

Product Dynatex Anti-Seize & Lubricating Compound. Trade Name of this Product Dynatex Anti-Seize & Lubricating Compound

TopCoat CRT White. Material Safety Data Sheet. Updated: 12/08. Quality You Can Trust Since From North America s Largest Roofing Manufacturer

Safety Data Sheet (SDS) Revision / Review Date: 3/26/15

1. Chemical Product and Company Identification. 2. Hazardous Ingredients. 3. Hazards Identification

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

Material Safety Data Sheet RUST VETO 4295-PT

Material Safety Data Sheet

*MATERIAL SAFETY DATA SHEET*

Part Numbers: SA-12C Hazard Rating: Health: 1 Fire: 4 Reactivity: EISENHOWER LANE NORTH LOMBARD, IL 60148

200CPEN PANTONE(R) 200 C SIMULATION

SAFETY DATA SHEET B939L VER 15-1 DATE: 10/8/14 SW

Section 2: Composition / Information on Ingredients Principle Component(s) (chemical and common name(s)) (Cas. No) % OSHA PEL mg/m3

MATERIAL SAFETY DATA SHEET

Chemical Name: Contact Cement. Manufacturer: Ace. Container size:.473l. Location: VLA. Disposal: Place empty container in trash.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET TRIM E CHEMICAL PRODUCT AND COMPANY IDENTIFICATION. Coolant and lubricant in metal removal processes

MATERIAL SAFETY DATA SHEET

( ) Graphite No No No ( ) Ammonium Hydroxide PPM

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. 1 - Identification

Material Safety Data Sheet

Material Safety Data Sheet Product No , Cutting Fluid, Soluble Oil Issue Date ( ) Review Date ( )

1. Chemical Product and Company Identification

Material Safety Data Sheet Product No. 892 Wenol Metal Polish Issue Date ( ) Review Date ( )

SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION

GAF Safety Data Sheet SDS #2222 SDS Date: August 2015

Safety Data Sheet. : Styrene Acrylic Polymer Co-Polymer

SAFETY DATA SHEET. Chemical Name Wt.% CAS Dimethyl siloxane, hydroxy-terminated Silicon dioxide

MATERIAL SAFTEY DATA SHEET

SAFETY DATA SHEET 1815, 1847, 1847N, 1847WIGWAG BMB. 1. Product and Company Identification. 2. Hazards Identification

1. Product And Company Identification

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Abrasive Supply Company, Inc.

<Product> ACE HARDWARE ELECTRONIC DUSTER, 09870, CRC # *********************** EMERGENCY PHONE #: ************************

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET FILE NO.: 679 NAME OF PRODUCT MSDS DATE: 7/2/12

VIPER INTERNATIONAL Ph (269) th Ave. Gobles, MI Material Safety Data Sheet VIPER S VENOM

Safety Data Sheet California CARB Compliant

Scott s Liquid Gold Wood Cleaner & Preservative (Aerosol) or consult local poison control center immediately

Gulf Harmony AW Hydraulic Fluid MG 32

SAFETY DATA SHEET 1805 BMB. 1. Product and Company Identification. 2. Hazards Identification

SAFETY DATA SHEET 1605, 1605L BMB. 1. Product and Company Identification. 2. Hazards Identification

Gold ( ) 70 ND ND No No No Toluene ( ) NE 100 ppm 100 ppm No No No Arcosolve PM ( ) NE 100 ppm 100 ppm No No No.

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Silicic acid (H2SiO3), disodium salt Not Established Not Established

MATERIAL SAFETY DATA SHEET

ZINC ANTI-SEIZE Zinc Dust and Petrolatum Compound SAFETY DATA SHEET Section 1- Product and Company Identification

Version 1.1 Print Date 09/13/2012 Revision Date 09/12/2012. Component CAS-No. Weight percent

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET TRIM C CHEMICAL PRODUCT AND COMPANY IDENTIFICATION. Synthetic Cutting and Grinding Fluid Concentrate

Safety Data Sheet. 1. Product Identifier and Company Identification. 2. Hazard Identification. 3. Composition/Information on Ingredients

LEXMAT MATERIAL SAFETY DATA SHEET

December 27, 2012 Page 1 of 5 MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET Revision date: 2/7/ CHEMICAL PRODUCT & COMPANY INFORMATION

1. PRODUCT AND COMPANY IDENTIFICATION

*There are no components with workplace exposure limits. This is not a hazardous material as defined in the OSHA Hazard Communication Standard.

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Silicic acid (H2SiO3), disodium salt Not Established Not Established

Ingredient CAS Number Weight % ACGIH TLV PEL STEL Silicic acid (H2SiO3), disodium salt Not Established Not Established

MATERIAL SAFETY DATA SHEET Beta Titanium SECTION 1 IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

Zip-Chem Products Calla 296 Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

1. Product Identification

MATERIAL SAFETY DATA SHEET

Transcription:

MATERIAL SAFETY DATA SHEET WYNN'S PROFESSIONAL PRODUCTS AUTOMATIC TRANSMISSION FLUSH WYNN S EMERGENCY TELEPHONE NUMBER: A division of Illinois Tool Works Inc. Chemtrec (800) 424-9300 1151 West Fifth Street INFORMATION TELEPHONE NUMBER: Azusa, California 91702 Wynn s (626) 334-0231 PRODUCT IDENTIFICATION PRODUCT NAME EFFECTIVE DATE Applies to all Wynn s products with the following prefix: Wynn's Professional Products Automatic Transmission Flush CHEMICAL NAME 644 CAS NUMBER HAZARDOUS INGREDIENTS COMMON NAME CHEMICAL NAME CAS NO. % OSHA PEL ACGIH TLV-TWA Petroleum Hydrocarbon Petroleum Distillate 64741-97-5 80-90 5 mg/m 3 mist 5 mg/m 3 mist Contains no other ingredients now known to be hazardous as defined by OSHA 29CFR 1910.1000(z) and 29CFR 1910.1200. PHYSICAL DATA These data are approximate or typical values and should not be used as precise specifications. Unless otherwise noted values are at 20!C(68!F) and 760 mmhg (1 atm). Boiling Point/Range >380!F (193!C) Freeze Point -10!F(-23!C) Specific Gravity (H 2 0=1) @ 15.6!C 0.898 Vapor Pressure (mm Hg) N/D Vapor Density (Air =1) N/D Solubility in Water (%) Negligible % Volatiles by Volume Negligible Evaporation Rate (Butyl Acetate = 1) N/D ph (as is) ph (dilute) @ % Appearance Clear Brown Thin Liquid Odor Hydrocarbon N/D - Not Determined - Not Applicable < = Less Than > = Greater Than

FIRE AND EXPLOSION HAZARD DATA Flash Point 260!F(127!C) Method Pensky - Martens Closed Cup ASTM D-93 Flammable or Explosive Limits (Approximate percent by volume in air) Lower (LEL) N/D Upper (UEL) N/D Hazard Class Identification Flammability Hazard Code 1 0 - Least (insignificant) Health Reactivity 1 - Slight 2 0 2 - Moderate Other 3 - High -- 4 - Extreme Extinguishing Media Dry chemicals, carbon dioxide, water spray, foam. Special Fire Fighting Procedures Use water only to cool fire exposed containers. Fire fighters wear a self contained breathing apparatus. Unusual Fire and Explosion Hazards Dense smoke. REACTIVITY DATA Stability Stable. Conditions to Avoid Heat, open flame. Materials to Avoid Strong oxidizing agents. Hazardous Decomposition or Combustion Products Thermal decomposition may produce oxides of carbon, nitrogen. Hazardous Polymerization (conditions) Will not occur. Page 2

HEALTH HAZARDS/ROUTES OF ENTRY Signs, Symptoms and Effects of Overexposure Ingestion (swallowing) May cause irritation to digestive tract. Skin Contact Eye Contact Inhalation (breathing) Prolonged contact can result in skin irritation and dermatitis. May cause irritation. Inhalation can cause irritation to nose and throat and upper respiratory tract. Other Effects of Prolonged/Repeated Overexposure This material has not been identified as a carcinogen by NTP, IARC or OSHA. EMERGENCY AND FIRST AID PROCEDURES Ingestion (swallowing) DO NOT induce vomiting. Call for medical help. Skin Contact Eye Contact Inhalation (breathing) Remove contaminated clothing. Wash affected area with soap and water. Call for medical help. Flush eyes with water for 15 minutes. If irritation persists call for medical help. Remove person to fresh air to avoid further inhalation. Call for medical help. Comments NOTE TO PHYSICIANS: Vomiting may cause aspiration into the lungs, resulting in chemical pneumonia. SPILL OR RELEASE CONTROL PROCEDURES Steps to be taken in case material is released or spilled Isolate area and restrict entry. Eliminate ignition sources. Use absorbent sand or clay. Shovel in containers and remove out of doors. Prevent liquid from entering sewers and water ways. Waste Disposal Method In accordance with all Federal, State and Local regulations. Environmental Hazard (EPA-CWA, Section 311) Spills of this material to surface waters where it will cause a sheen must be reported to the National Response Center, (800) 424-8802. Page 3

EPA Reportable Quantity (RQ), 40CFR302 (CERCLA104) EPA Toxic Chemical Release Reporting, 40CFR372(SARA313) Chemical CAS NO. % in Product HANDLING AND STORAGE Handling and Storage Precautions WARNING: Contains petroleum distillates. Avoid skin and eye contact. Avoid breathing of vapors. Combustible. Keep away from heat and sparks. Use entire contents. DO NOT store opened containers. Other Precautions KEEP AWAY FROM CHILDREN. PERSONAL PROTECTION - EXPOSURE CONTROL Ventilation Normal use, none required. Respiratory Protection Normal use, none required. Eye Protection Safety glasses. Protective Gloves Impervious gloves. Other Protective Clothing or Equipment None. Work/Hygienic Practices Personal cleanliness is always appropriate. Frequent washing minimizes inadvertent exposure. Page 4

TRANSPORTATION INFORMATION Department of Transportation (DOT) Classification Flammable Liquid Flammable Solid Corrosive Non-Flammable Gas Flammable Gas XXX Not Hazardous by DOT Combustible Liquid Other: DOT Proper Shipping Name DOT ID Number PACKAGING GROUP DOCUMENTATION Product Code No.: 644 Issue Date: Previous Code No.: 644 Prior Date: 03-10-98 This information is, to the best of our knowledge and belief, accurate and reliable as of the date compiled. However, no representation, warranty or guarantee is made as to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to the suitability and completeness of such information for his own particular use. Page 5