Turned parts Milled parts Component assembly Check valves wafer type Valve technology
AWS group 2 companies 3 lo What AWS stands for Dear Reader, Since over three decades our company is characterized by continuous growth, allied to unending progress and success, which is dependent on a number of factors. We are proud to be able to continue our day-to-day activity on a solid and forward-looking business basis, thanks to a healthy combination of these factors. One of these factors is the product quality. The effort to achieve the best possible quality for our products should provide the basis for keeping our customers satisfi ed. In order to be able to ensure this, it is fundamentally important that we constantly adjust to newly-defined national and international quality standards. On the one hand, we foster this process internally through innovation and the determination to cover future market needs in all company planning. On the other hand, we see it as a prerequisite that the wishes of customers should be met with flexibility and to their basic satisfaction with all available means and in an appropriate chronological and financial context. For us, people are the most important factor helping to ensure a company s success. People s commitment, experience, knowledge and cooperation with others are fundamental contributory factors in a company s further development. From our point of view it is a self-evident requirement to be economical with resources. Our considered and sensible use of raw materials enables us to maintain our competitiveness and our fi rm position in the market. Company directors of the AWS group: above: Frank Arnold with founder of AWS Willi Arnold right: Kai Böhmann, General Manager AWS Apparatebau Arnold GmbH Sales of products in our various branches of activity, such as automotive, plant and mechanical engineering, dispensing equipment manufacture, medical technology and the electronic and chemical industry, can thus be instrumental in contributing towards the company s success. We are pleased to note your interest in our products and look forward to a constructive business relationship, which will be profitable for all concerned parties. Frank Arnold und Willi Arnold Company directors
cations Development and progress, expansion and growth testify to a healthy business structure. Not only does Germany lie geographically in the centre of Europe but the label Made in Germany also continues to represent a central quality standard for manufacturing, developing and industrial branches worldwide. Our flexibility, high production capacity and wide product range enables us to ensure a high grade of customer satisfaction. Schöntal-Sindeldorf Today s head office of the company AWS Fertigungstechnik GmbH in Schöntal-Sindeldorf is located in the idyllic region of the Hohenloher Land. In 1976 the first production area was set up here. Over the course of time, various annexes and new buildings were added to the original area to create a production, storage and administrative area of more than 2500sqm. Nearly 50 people are currently employed in Sindeldorf, home of the administration, purchase, sales and assembly. It is a factory for the production of single parts and small series as well as storage division for parts and finished products of AWS Fertigungstechnik GmbH. Forchtenberg Pößneck In 1999 a new subsidiary was founded in Pößneck. Here, in 2100sqm of newly constructed production and administrative premises, high precision turning and milling parts in average-size batches are being produced for our own and our customer s requirements on the latest CNC lathes and CNC machining centers by meanwhile approximately 60 employees. Forchtenberg in the Kocher valley is the place of business of the company AWS Apparatebau Arnold GmbH since 2007. Main products of this location with 35 employees are check valves, one of the main pillars of the company for over 38 years, as much as valve technology. Own developments, efficient stock-keeping and production of single parts in the AWS group guarantee a high level of flexibility and the readiness for short-term shipments.
Precision as an expression of o The AWS Fertigungstechnik GmbH Quality Management Your efficient and reliable partner for precision turned and milled parts as well as component assemblies. We provide a full service from a single source. Subsequent processing such as barrel finishing, honing, gear cutting and laser marking are part of it. Also different logistics models as e.g. consignment stocks, VMI or Kanban. Together with external partners we can provide surface finishing like zinc-plating, nickel-plating, burnishing, phosphating, anodizing, hardening etc. Our products are used in the following sections: automotive medical technology machinery and plant engineering measurement and control technology valve technology electronics Find out our skills at these product groups: turned parts milled parts component assemblies For us quality is not a luxury but rather a central company vision. Therefore quality management is more than a necessary instrument at all levels of the company. It ensures constant and reproducible quality across all areas of the business. For years we have been working towards a code of practice for quality management. Since the year 2008 it is confirmed by the certificate acc. to ISO 9001:2008. From the stock-receipt to the product supply stage, systematic quality testing is carried throughout all departments. Last but not least, attainment of the required quality standard is checked and documented at the final checking stage, using the most upto-date methods of measurement (like 3D measuring machine, statistical process control SPC, surfaces measuring instruments for roughness, waviness and profile measurement). Do you need a personal consultation? Our sales representative will be glad to arrange an appointment with you.
ur professional competence Turned and milled parts Component assemblies We turn everything for you Our production range includes the production of simple turned and milled parts as well as complex components and both single part and standard larger-scale part production. We can produce precision turned and milling parts out of many different materials metal like stainless steel, cast-steel, aluminum or brass and also plastic materials like PVC, PP or PVDF are as possible as many special materials. We rework your turned parts from Ø 3 to Ø 90 mm from bar. Lining works are possible up to Ø 400 mm. For the milled parts a range up to 100 x 300 x 500 mm is possible. We offer you an optimal service through a combination of our production set-up and best outside specialist procurement arrangements for required components (springs, joints, connections, cast parts, punched and bent parts, stamped parts, etc.). A very wide range of assemblies and connections, like screws, adhesive, shrinkage, squeezers, rivets, welding, soldering, etc. are possible and can be realized by skilled staff. With our own test benches, own component assembly and permanent control of our quality department we provide you with a full-service including necessary pressure and leak tightness test, test reports, type approval test and prototype test reports. Automatic assembly machines For big quantities we use automated assembly facilities, which are adapted for your products.
Quality valves AWS Apparatebau Arnold GmbH Valve technology and component assembly Since many years we work together with local and global acting customers. Through these business relations (some of them exist over decades) with global players and market leaders the requirements are huge but for us this is a challenge and an enrichment. We have already met the requirements and do our best to improve us every day. We do this on behalf of our own interests and the interests of our partners. AWS Apparatebau is ISO 9001:2008 certificated for many years now. The guideline for our quality management is a constant and reproducible quality at all levels. In 2012 we got the ISO 14001:2004 environmental certificate. Regarding the requirements of our customers and our own targets the opportunities to fulfill the requirements thoroughly are growing. This is shown by the following examples: High-quality test benches and standardized product tests e.g. according to EN12266 and API598 The most modern CAD systems (SolidWorks) and accompanying trainings FEM analyses, flow simulation, etc. In-house spectral analysis to check the incoming goods Customer satisfaction is our priority. This we can achieve through excellent product quality for a suitable and equitable price. The whole team of AWS Apparatebau is working to improve and keep the customer satisfaction up every day since 1974. We quote you an optimal service through the combination of our own production (at our partner company AWS Fertigungstechnik) and favorable outsourcing at specialists (e.g. springs, seals, connections, cast parts, punch and bending parts etc.). On request it is also possible to provide us your own parts. More than 30 years experience with varied mounting and connection technology and qualified staff grant the high quality and reliability. Our range of valve technology includes 2/2-way and 3/2-way, direct acting, servo controlled and force pilot operated valves with all common operating voltages as well as air controlled designs. Depending on the design the valves are suitable for neutral, aggressive, liquid and gaseous media. Additional valves like strainers, pressure relief valves, manually and automatic operated ball valves complete our program. We quote you our complete service of the pressure and tightness tests on our own test benches for the component assembly as well as for the valve technology. Material certificates, type approval test, certificates and declarations of conformity will be created according to request. In cooperation with the customer, the sales and construction department and our high-quality CAD opportunities we are able to create modifications and optimizations on all products.
Check valves wafer type AWS check valves wafer types are produced in many different materials and material combinations for the most different applications and pressure ranges. The valves are used in the section of process technology, process engineering, shipbuilding and general industrial plant manufacturing as well as in the sanitary and heating section with liquid and gaseous media. can quote you an all around service for all products. Every valve is checked on pressure and tightness before delivery. If necessary we can also do the material test and create a type approval test certificate according to DIN EN 10204 as well as the declaration of conformity and the CE marking. The check valves wafer type (especially space-saving design) are standardly produced in cast steel zinc-plated, stainless steel (different alloys), plastic materials (PVC-U, PVC-C, PP, PVDF) and aluminum bronze. Other materials are possible on request. With the different seals (NBR, EPDM, Viton, PTFE and metal seated) nearly all possible applications are covered. They are mounted between DIN and ANSI flange in horizontal and vertical piping systems. The pressure range is covered till PN40 and ANSI300 as standard. Higher pressures on request. Dual plate check valves (low pressure loss and high flow rate) are also produced in many different material combinations and the same seal as mentioned above. The hydrodynamic characteristics are excellent and allow for example an optimized pump selection cost reduction. Lift check valves (so called Disco valves) complete the program of the check valves. Also in this product field we cover almost all possible applications through the big range of material combinations. All products are governed by the high quality requirements of AWS. On the basis of many year s experience, own development, assembly and high-grade testing methods we
AWS group 2 companies 3 locations: AWS Fertigungstechnik GmbH www.aws-ft.de Your partner for Turned parts Milled parts Component assembly AWS Apparatebau Arnold GmbH www.aws-apparatebau.de Your partner for Check valves wafer type Valve technology Component assembly Administration, sales, production: Wallbrunnenstraße 43 D - 74214 Schöntal-Sindeldorf Phone +49 (0) 6294 906-0 Fax +49 (0) 6294 906-29 info@aws-ft.de Production: Thiemsdorfer Straße 2 D - 07381 Pößneck Administration, sales, assembly, r&d: Im Kupfertal 52 D - 74670 Forchtenberg Phone +49 (0) 7947 94339-0 Fax +49 (0) 7947 94339-14 info@aws-apparatebau.de www.aws-group.de