S-2 5.6 OZ. WOVEN POLYETHYLENE F. R. A 1000 denier tape woven into a fabric and coated 2.2 mil on both sides. An economic, light weight yet durable material for industrial applications for indoor use only. Colour White - Pale Yellow Mullen Burst 300 P.S.I. Thickness.011 (11 mil.) Fire Resistance Passes 5-6 oz. / sq. yd. (CPAI 84 Section 6 & 7) Temperature Range -18 C (0 F) to 95 C (200 F) Weave Count 12 x 6 Tensile Strength Warp 140 lbs. - Weft 135 lbs. Fabric Roll Width 120 Tear Strength Warp 43 lbs. - Weft 45 lbs. S-3 KLEAR SPAN FR A clear polyester reinforced fabric ideal for applications where long life and transparency are required. The formulation is anti-wicking, anti-mildew and UV resistant. Colour Clear Hydrostatic Resistance 200 lbs. P.S.I. Thickness.016 Cold Crack -35 C Coated Fabric 14.5 oz. / sq. yd. Grab Tensile 140 lbs. / 125 lbs. Temperature Range -35 C (-31 F) to 80 C (175 F) Tongue Tear 30 lbs. / 30 lbs. Flame Resistance 2nd self extinguish Fabric Roll Width 61 S-6 18 OZ. VINYL COATED POLYESTER (VCP) A PVC coated polyester scrim. The PVC formulation is flame retardant, rot, mildew and ultra-violet resistant and suitable for indoor and some outdoor applications. The tight weave of the scrim gives the fabric a very high tear strength. Colour Choices Available Grab Tensile 401 / 368 lbs. Thickness.018 Hydrostatic Resistance 500 lbs. P. S. I. Coated Fabric 18 oz. / sq. yd. Tongue Tear 73 x 63 lbs. Temperature Range -50 C (-58 F) to 80 C (175 F) Weave Count 18 x 18 Flame Resistance Passes Fed. Std. 191 Fabric Roll Width 60 Cold Crack -55 C
S-8 16 OZ. NEOPRENE 16 oz. Neoprene is a polyester woven fabric with a neoprene coating. It is an extremely durable material which resists most chemicals, sparks, tearing and abrasion. It is also ideal for cold weather applications. Colour Black Tensile Strength Warp 500 lbs./in. Thickness.018 Fill 300 lbs./in. 5.5 oz. fabric, 16 oz. Fabric Roll Width 60 with Neoprene coating Temperature Range -43 C (-45 F) to 100 C (212 F) S-9 40 OZ. NEOPRENE 40 oz. Neoprene possesses all the characteristics of 16 oz. neoprene but is heavier and suitable for environments where a heavy duty fabric is required. It is an extremely durable material which resists most chemicals, sparks, tearing and abrasion. It is also ideal for cold weather applications. Colour Black Tensile Strength Warp 450 lbs./in. Thickness.038 Fill 350 lbs./in. 5.5 oz. fabric, 40 oz Fabric Roll Width 60 with Neoprene coating Temperature Range -43 C (-45 F) to 100 C (212 F) S-10 10 OZ. COTTON DUCK 10 oz., 100% cotton duck, treated with a permanent, paraffin based finish. 10 oz. duck is self-extinguishing and resists water, rot and mildew. Ideal for fire retardant covers and welding curtains. Colour Olive Green Flame Resistance Passes CPAI 84 Thickness.013 Section 7 10 oz. / sq. yd. Temperature Range -35 C (-30 F) to 120 C (250 F) Fabric Roll Width 61
S-11 16 OZ. HYPALON 16 oz. Hypalon is a nylon woven fabric with a hypalon coating. It is an extremely durable material which resists abrasion, puncturing and tearing. Also excellent resistance to most chemicals. Colour Black Tensile Strength Warp 400 lbs./in. Thickness.019 Fill 400 lbs./in. 16 oz. / sq. yd. Abrasion Resist. Cycles to failure using H22 Temp. Range -43 C (-45 F) to 100 C (212 F) 1000 Gram - 100 Aug. Oil Resist. Pass mil C206960 Sec. 4.4.3. Fabric Roll Width 60 S-12 35 OZ. HYPALON 35 oz. Hypalon is a nylon woven fabric with a hypalon coating. It is an extremely durable material which resists abrasion, puncturing and tearing. Also excellent resistance to most chemicals. Colour Black Tensile Strength Warp 450 lbs./in. Thickness.038 Fill 350 lbs./in. 35 oz. /sq. yd Fabric Roll Width 60 Temperature Range -43 C (-45 F) to 100 C (212 F) S-13.014 YELLOW PVC Rugged transparent vinyl, specially formulated to block light at harmful wavelengths which is present in most welding applications. Yellow shade provides excellent visibility. It is not intended as a substitute for direct or prolonged eye protection in welding operations. Colour Yellow Flame Resistance Passes CPAI - 84 Thickness.014 Section 7 13 oz. /sq. yd Cold Crack -20 C Temperature Range -20 C (0 F) to 60 C (140 F) Fabric Roll Width 66
S-14.014 GREEN PVC Rugged transparent vinyl, specially formulated to block light at harmful wavelengths which is present in most welding applications. Green keeps flash from distracting nearby workers. It is not intended as a substitute for direct or prolonged eye protection in welding operations. Colour Green Flame Resistance Passes CPAI - 84 Thickness.014 Section 7 13 oz. /sq. yd Cold Crack -20 C Temperature Range -20 C (0 F) to 60 C (140 F) Fabric Roll Width 66 S-15.014 DARK GREEN PVC Rugged transparent vinyl, specially formulated to block light at harmful wavelengths which is present in most welding applications. Dark green keeps flash from distracting nearby workers. It is not intended as a substitute for direct or prolonged eye protection in welding operations. Colour Dark Green Flame Resistance Passes CPAI - 84 Thickness.014 Section 7 13 oz. /sq. yd Cold Crack -20 C Temperature Range -20 C (0 F) to 60 C (140 F) Fabric Roll Width 66 S-16.014 ORANGE PVC Rugged transparent vinyl, specially formulated to block light at harmful wavelengths which is present in most welding applications. Orange provides excellent visibility, blocks blue light. It is not intended as a substitute for direct or prolonged eye protection in welding operations. Colour Orange Flame Resistance Passes CPAI - 84 Thickness.014 Section 7 13 oz. /sq. yd Cold Crack -20 C
Temperature Range -20 C (0 F) to 60 C (140 F) Fabric Roll Width 66 20 Steckle Place, Unit 8 S-17.020 CLEAR PVC Transparent PVC material provides excellent visual capabilities (ie. supervision) as well as allowing lighting to pass through from other areas. Colour Clear Flame Resistance Passes CPAI - 84 Thickness.020 Section 7 16 oz. /sq. yd Cold Crack -20 C Temperature Range -20 C (0 F) to 70 C (160 F) Fabric Roll Width 54 S-19.060 CLEAR PVC Transparent PVC material provides excellent visual capabilities (ie. supervision) as well as allowing lighting to pass through from other areas. Strip material also allows for easy access at any point in the curtain. Colour Clear Flame Resistance Passes CPAI - 84 Thickness.060 (nom) Section 7 3 lbs. /sq. yd Cold Crack -20 C Temperature Range -20 C (0 F) to 70 C (160 F) Fabric Roll Width 6 +.25 S-20.080 CLEAR PVC Transparent PVC material provides excellent visual capabilities (ie. supervision) as well as allowing lighting to pass through from other areas. Strip material also allows for easy access at any point in the curtain. Colour Clear Flame Resistance Passes CPAI - 84 Thickness.080 (nom) Section 7 4.5 lbs. /sq. yd Fabric Roll Widths 8 +.25
Temperature Range -20 C (0 F) to 70 C (160 F) 48 +.25 20 Steckle Place, Unit 8 S-21.120 CLEAR PVC Transparent PVC material provides excellent visual capabilities (ie. supervision) as well as allowing lighting to pass through from other areas. Strip material also allows for easy access at any point in the curtain. Colour Clear Flame Resistance Passes CPAI - 84 Thickness.120 (nom) Section 7 6.75 lbs. /sq. yd Fabric Roll Widths 12 +.25 Temperature Range -20 C (0 F) to 70 C (160 F) 48 +.25 S-22.160 CLEAR PVC Transparent PVC material provides excellent visual capabilities (ie. supervision) as well as allowing lighting to pass through from other areas. Strip material also allows for easy access at any point in the curtain. Colour Clear Flame Resistance Passes CPAI - 84 Thickness.160 (nom) Section 7 9 lbs. /sq. yd Fabric Roll Widths 16 +.25 Temperature Range -20 C (0 F) to 70 C (160 F) 48 +.25 S-23.080 WELD PVC Bronze colour blocks light at harmful wavelengths. It is not intended as a substitute for eye protection in welding operations. Ideal for containing welding booths where access through the curtain is required. Colour Bronze Flame Resistance Passes CPAI - 84
Thickness.080 (nom) Section 7 4.5 lbs. /sq. yd Fabric Roll Width 8 +.25 Temperature Range -20 C (0 F) to 60 C (140 F) 48 +.25 S-24 TINTED ORANGE PVC Bright orange PVC strips are typically used as safety / warning strips around sides of a door or areas where access is not available. Colour Orange Flame Resistance Passes CPAI - 84 Thickness.080 (nom) Section 7 4.5 lbs. /sq. yd Cold Crack -20 C Temperature Range -20 C (0 F) to 60 C (140 F) Fabric Roll Width 8 +.25 S-27 17 OZ. SILICONE COATED GLASS Ideal for protective covers and insulation. Water and oil resistant. Satin weave finish. Colour Silver/Gray Tensile Strength Warp 100 lbs./in. Thickness.017 Fill 50 lbs./in. 17 oz. /sq. yd Max. Service Temp. 260 C (500 F) Fabric Roll Width 60 S-28.020 HYPALON COATED GLASS (BOTH SIDES) Highly acid and alkali-resistant material. Resists tearing. Repels molten metal in a vertical position. Excellent for close-in welding, cutting and grinding. Excellent for laser beam containment.
Colour Light Green Tensile Strength Warp 350 lbs./in. Thickness.020 Fill 170 lbs./in. 18 oz. /sq. yd Max. Service Temp. 177 C (350 F) Fabric Roll Width 60 S-29.050 NEOPRENE COATED GLASS (ONE SIDE) Neoprene coated side repels molten metal in vertical position. Texturized glass fibers increase thickness and minimize burn-through. Designed for use in vertical welding curtains for spark containment, flash barriers and heat shields. Colour Gold Tensile Strength Warp 108 lbs./in. Thickness.047 Fill 118 lbs./in. 28 oz. /sq. yd Max. Service Temp. 149 C (300 F) Fabric Roll Width 60 S-30 10.6 OZ. ALUMINIZED KEVLAR Aluminized kevlar is composed of kevlar fibres, friction spun around a continuous filament glass core. This woven fabric is laminated with aluminized foil on one side resulting in a fabric with superior heat reflectivity and oil spray resistance. Colour Silver / Yellow Base Cloth Temperature Resistance: 650º F Thickness.022 Aluminized Temperature Resistance: 450º F 11.0 oz. /sq. yd Adhesive Temperature Resistance: 300º F Tensile Strength Warp 640 lbs/in Radiant Heat: up to 2000º F Fill 540 lbs/in Fabric Roll Width 56 S-32 20 OZ. FOIL COATED GLASS Aluminum foil is laminated to one side of the glass based fabric. Recommended for less severe applications requiring heat reflectivity and molten metal splash resistance.
20 Steckle Place, Unit 8 Colour Silver / Gold Tensile Strength Warp 200 lbs/in Thickness.035 Fill 100 lbs/in 20 oz. /sq. yd Max. Service Temp. Base 593 C (1100 F) Fabric Roll Width 60 Max. Service Temp. Foil 148 C (300 F) S-34 22 OZ. ALUMINIZED GLASS Vacuum metalized dual mirror finish aluminized mylar film is bonded to one side of the glass based fabric. Recommended for less severe applications requiring heat reflectivity and molten metal splash resistance. Can reflect 90% of radiant heat up to 3000 F. Colour Silver / Gold Tensile Strength Warp 200 lbs/in Thickness.035 Fill 100 lbs/in 22 oz. /sq. yd Max. Service Temp. Base 593 C (1100 F) Fabric Roll Width 60 Max. Service Temp. Foil 260 C (500 F) S-35 TEFLON COATED GLASS PTFE teflon coated and impregnated E glass based fabric. Smooth teflon surface provides excellent resistance to most chemical applications. Colour Gray Tensile Strength Warp 410 lbs/in Thickness.014 Fill 355 lbs/in 14 oz. /sq. yd Max. Service Temp. 288 C (550 F) Fabric Roll Width 60 S-39 14 OZ. PVC MESH
A PVC coated polyester mesh in a 17 x 12 weave. This lightweight, fire resistant mesh is suitable for bug screens or personnel screens where ventilation is desired. Colour White/Cream Tensile Strength Warp lbs/in Thickness.030 Fill lbs/in 14 oz. /sq. yd Flame Resistant Yes Temperature Range -20 C (0 F) to 70 C (160 F) Fabric Roll Width 72 S-41 ERA 7810 A black polyester material that is resistant to water, emulsion, oil and some chemicals. Applications include covers for metal milling/lathe and grinding machines. Colour Black Strength Warp 2000-2600 N/5 cm Thickness 0.014-0.016 Weft 1700-2200 N/5 cm 15-16.25 oz./sq. yd. Melting point (coating) >180 C (356 F) Fabric Roll Width 59 S-42 ERA 7815 A black polyester material that is resistant to water, emulsion, oil and some chemicals. Colour Black Strength Warp 1050-1350 N/5 cm Thickness 0.007-0.009 Warp 800 N/5 cm 8.4-9.7oz./sq.yd Melting point (coating) >180 C (356 F) Fabric Roll Width 51 S-44 OZ 23
A black polyester based material that is resistant to water, emulsion and oil. Used in medical applications, automotive production, robotics, milling and grinding machines. A good multi-purpose material. Colour Black Tensile Strength Warp 1200 N/5 cm Thickness 0.010 Weft 800 N/5 cm 11oz./sq.yd. Temperature Range -15 C (5 F) to 70 C (158 F) Fabric Roll Width 59 S-45 OZ 35 A black polyester based material which is resistant to emulsion, water and oil. Used in automotive, robotic, medical, metal milling and grinding applications. Colour Black Tensile Strength Warp 180 N/5 cm Thickness 0.014 Warp 220 N/5 cm 15.6 oz/sq.yd. Temperature Range -25 C (-13 F) to 70 C (158 F) Fabric Roll Width 51 S-46 PREOTEX A black aramid-kevlar material that is resistant to water, emulsion and oil. It is self extinguishing and resists sparks and hot chips. Applications include laser, plasma and water jet cutting. Colour Black Strength Warp >1850 N/5cm Thickness 0.012 Weft >1400 N/5cm 10.9oz/.sq.yd. Roll Width 59 Melting Point (coating) 600 C (1112 F) S-47 PUR TEFLON
A black polyester based material that is resistant to water, emulsion, oil and chemicals. It is partially resistant to sparks and hot chips. Applications include metal milling/lathe and grinding and water jet cutting. Colour Black Strength Warp 850 N/5 cm Thickness 0.011 Weft 800 N/5 cm 28.6 oz./sq.yd Temperature Range -40 C (-40 F) to 250 C (482 F)