8/25/2016 PRODUCT DATA ECMS EC-200 SYSTEM COMPOSITE WALL PANEL East Coast Metal Systems, Inc 407 53 rd Street P.O. Box 217 Bellaire, OH 43906 P: F: (740) 671-8760
SYSTEM The Pressure Equalized Rain Screen System is based upon the rainscreen principle and allows incidental water to enter the cladding cavity but then be drained via weep holes. Utilizing formed panels, this system is mounted using aluminum extrusions. Panel joints are finished using color matched or complementary accent strips that float within the extrusions allowing a reveal from 1/2" to 12. The EC-200 system is compatible with 4mm, 6mm, & 8mm ACM Panels.
SYSTEM PERFORMANCE TESTING System: Panel Type: Material Options: Core Options: Color: Finish: Substrate: Standard Panel Surface: EC-200 (Dry-Joint) Composite Wall Panel 4-mm, 6-mm, 8-mm Polyethylene-PE, Polyethylene-FR, Phenolic-FR Available in over 100 standard colors through a variety of ACM Suppliers (Request Color Chart or metal samples) Custom Color available Kynar, PEVE, Woodgrain Anodized, Natural Metals available Subgirt or Plywood Smooth Max Panel Width: 60 (1524 mm) 1 Min. Panel Width: Max Panel Length: Min. Panel Length: 4 (101.6 mm) 194 (4927.6mm) 4 (101.6 mm) Test Method Title of Test Results ASTM E 330 Uniform Load Deflection Pass 3 ASTM E 330 Uniform Load Deflection Pass 3 Test Method Title of Test Results ASTM E 283-04 Air Infiltration Pass 2,3 ASTM 1233-06 Pressure Cyclic Pass 2,3 ASTM E 331-00 Static Water Penetration Pass 2,3 AAMA 501.1-05 Dynamic Water Penetration Pass 2,3 Note 1. Max panel width subject to change based on vendor material 2. Passes AAMA 508-07 3. Test Repots available upon request **Test Date 1/30/16
BACKING ROD & SEALANT(BY INSTALLER) 1 2 " 1 EC-202 1-15 16" 2 EC-201 EC-203 WEEP BAFFLE WEEP HOLE LOW PROFILE POP RIVET 1 2 " P.D. (PANEL DIMENSION) P.H. (PANEL HEIGHT) ACM/MCM ACM/MCM REVEAL 3 FASTENER (BY INSTALLER) WATER BARRIER (B.O.) EC-202 FASTENER (BY INSTALLER) FASTENER (BY INSTALLER) EC-201 EC-202 LOW PROFILE POP RIVET WEEP BAFFLE FLASHING (B.O.) 1 2 " O.A. (OVERALL PANEL SYSTEM DIMENSION) WEEP HOLE 1 TYPICAL HEAD DETAIL 2 TYPICAL HORIZONTAL/VERTICAL JOINT 3 TYPICAL BASE JOINT EC-200 PANEL SYSTEM - ISOMETRIC EC-200 Dry Joint System The EC-200 Metal Composite AAMA 508-07 System allows minimal water penetration. The minimal amount of water that does penetrate the system drains through weep holes. This system utilizes full length extrusions with 6" clips. The EC-200 utilizes a "floating" panel attached to the extrusion to provide a reveal of 1 2" to 12". The system requires no caulking with the exception of joints at perimeter edges where required. The EC-200 provides a hi-tech, clean look and is easy to install. The EC-200 System is compatible with 4mm, 6mm, & 8mm ACM Panels. P-1
EC-200 COMPOSITE PANEL SYSTEM P-8 P-9 P-5 P-6 P-10 P-5 P-6 P-11 P-7 P-11 P-7 P-4 ABBREVIATIONS ACM/MCM = ALUM. OR METAL COMPOSITE MATERIAL B.O. = BY OTHERS O.A. = OVERALL PANEL SYSTEM DIMENSION P.D. = PANEL DIMENSION P.H. = PANEL HEIGHT P.W. = PANEL WIDTH INDEX (P-2): SYSTEM OVERVIEW (P-3): EXTRUSIONS (P-4) - (P-11): SYSTEM DETAILS P-2
ATTACHMENT EXTRUSIONS 1 1 8 " 3 11 16 " 2" 9 16 " 1 3 8 " EC-201 EXTRUSION (STARTER STRIP) EC-202 PANEL EXTRUSION 9 16 " 3 4 " EC-203 1/2" JOINT CLIP 3 4 " 2 3 4 " 2" 2 3 4 " PLATE PANEL RETURN REINFORCEMENT P-3
SILL CONDITION P-4
HORIZONTAL / VERTICAL JOINT- TYPICAL JOINT P-5
HORIZONTAL / VERTICAL JOINT- WIDE JOINT P-6
START CONDITION P-7
PARAPET CONDITION P-8
COPING CONDITION P-8.1
INSIDE CORNER CONDITION P-9
OUTSIDE CORNER P-10
TERMINATION CONDITION P-11