Certificate of Compliance

Similar documents
Ref No: I Date: November 5, 2004

SPECIFIC TECHNICAL CRITERIA

SPECIFIC TECHNICAL CRITERIA

REVISION HISTORY Rev Description Author. Approved by Date A Initial release per ECO Daniel Livingston

Innovating Reliable Power

UL TEST REPORT AND PROCEDURE

UL TEST REPORT AND PROCEDURE

UL TEST REPORT AND PROCEDURE

Certificate of Compliance

UL TEST REPORT AND PROCEDURE

Certificate of Compliance

Certificate of Compliance

Certificate of Compliance

Certificate of Compliance

Certificat de constance des performances 1148-CPR-(20) Hydro Extrusion Drunen BV Alcoalaan 1 NL-5151 RW DRUNEN EN :2007

Certificate of Compliance

UL TEST REPORT AND PROCEDURE

201X Elo Touch Solutions, Inc. All Rights Reserved.

GROUPE D EXPERTS SUR LES MARCHANDISES DANGEREUSES (DGP)

Certificate of Compliance

Certificate of Compliance

This document is a preview generated by EVS

Electrical/Electronics

INTERNATIONAL STANDARD NORME INTERNATIONALE

Certificate of Compliance

Ref No: N Date: August 26, 2009

Certificate of Compliance

IECEE OPERATIONAL DOCUMENT

ISO/IEC INTERNATIONAL STANDARD

INSTALLATION INSTRUCTIONS DirectAC Universal Voltage ( V) Engine Refrofit Kit TJTUNV034ACxxxB

An Urgent Bulletin from CSA Group

This document is a preview generated by EVS

Certificate of Compliance

Certificate of Compliance

1. TRANSIT SERVICES BY-LAW AMENDMENTS (REGULATORY REQUIREMENTS FOR FARE INSTRUMENTS)

Information technology equipment Safety Part 1: General requirements

ROUND LIGHTPLANE 1 3D SURFACE

ELECtro-Medical devices. in trusted hands. sgs is the world s leading

ISO/TS TECHNICAL SPECIFICATION

Certificate of Compliance

GES Customs Services. Reliable and Efficient Service. Experienced and reliable staff you can depend on who specialize in clients a one

ISO/IEC Second edition Reference number ISO/IEC 25051:2014(E) ISO/IEC 2014

Certificate of Compliance

customs GES Customs Services Reliable and Efficient Service Value Added Service Personalized Service On-Site Representation Simplified Ordering

ALUPANEL CERTIFICATIONS & GENERAL INFORMATION

Complete global Solutions

StarPack LED Luminaire

Current Standards Activities

ISO INTERNATIONAL STANDARD. Mechanical vibration and shock Evaluation of human exposure to wholebody

Certificate of Compliance

INTERNATIONAL STANDARD NORME INTERNATIONALE

Draft Regulation. 3. This Regulation comes into force on (insert the. 832 GAZETTE OFFICIELLE DU QUÉBEC, January 28, 2004, Vol. 136, No.

European Technical Approval ETA-13/0520

Avis de Modification Produit / Process Product / Process Change Notification

Completed Projects / Projets terminés

An Urgent Bulletin from CSA Group

ISO INTERNATIONAL STANDARD

Customs and Transportation Services

This document is a preview generated by EVS

TEST REPORT IEC Information technology equipment Safety Part 22: Equipment to be installed outdoors

ISO/IEC INTERNATIONAL STANDARD. Conformity assessment General requirements for third-party marks of conformity

ISO INTERNATIONAL STANDARD

Proposal for Cumulative Effects Assessment (CEA) in Air Approvals

Communications/Information

MINISTRY DIRECTIVE. Drainage Act Ministry of Transportation Policy and Procedures

(English language translation, the original version is in French language) SORMAT LYT. SORMAT OY Harjutie 5 FIN Rusko Finlande.

Manual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.

Installation Procedure Supplement Manual (Revision A, 6/2016) LECM Large Engine Control Module

An Urgent Bulletin from CSA International

ISO/IEC INTERNATIONAL STANDARD

Mendelssohn Customs & Transportation Services

This document is a preview generated by EVS

Current Research

Canadian International Turfgrass Conference & Trade Show. The Sheraton Centre Toronto. February 26 th March 2, 2010.

CONSTRUCTION OF THE WORLD S LARGEST LNG IN-GROUND STORAGE TANK CONSTRUCTION DU PLUS GRAND RESERVOIR GNL ENTERRE AU MONDE

Archived Content. Contenu archivé

ISO INTERNATIONAL STANDARD. Implants for surgery Active implantable medical devices Part 4: Implantable infusion pumps

TECHNICAL SPECIFICATION

 COMPUTER PROGRAM FOR THE CALCULATIONS IN THE CSA STANDARD Z "PROCEDURES FOR THE MEASUREMENT OF OCCUPATIONAL NOISE EXPOSURE"

ISO/IEC INTERNATIONAL STANDARD

QPS Evaluation Services Inc.

PLANNING COMMITTEE REPORT JULY COMITÉ DE L URBANISME RAPPORT 34 LE 11 JUILLET ZONING 2 LASER STREET ZONAGE 2, RUE LASER

ISO/TS TECHNICAL SPECIFICATION

ISO 9597 INTERNATIONAL STANDARD. Cement Test methods Determination of setting time and soundness

ISO/TC 34/SC 9. Voting begins on:

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD. Medical gas pipeline systems Part 2: Anaesthetic gas scavenging disposal systems

ISO/IEC INTERNATIONAL STANDARD

OIL & GAS MARKET OVERVIEW

TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements

An Urgent Bulletin from CSA International

An Urgent Bulletin from CSA International

Completed Projects / Projets terminés

Capital Projects Group Gas Fired Warm Air Furnace Specification

ISO INTERNATIONAL STANDARD

ISO/TS TECHNICAL SPECIFICATION

ISO INTERNATIONAL STANDARD. Non-destructive testing Qualification of personnel for limited applications of non-destructive testing

Current Standards Activities

Guidance for Factory Inspectors Annex Special Requirements For Europe

ISO INTERNATIONAL STANDARD

Transcription:

Certificate of Compliance Certificate: 2164381 Master Contract: 201161 Issued to: SonoSite, Inc. 21919 30th Dr SE Bothell, WA 98021-3904 USA Attention: Jean Bishop The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and US or with adjacent indicator 'US' for US only or without either indicator for Canada only. Issued by: Joseph Poon Joseph Poon, AScT PRODUCTS CLASS 8750 01 CLASS 8750 81 - MEDICAL ELECTRICAL EQUIPMENT - MEDICAL ELECTRICAL EQUIPMENT/SYSTEMS - Certified to US Standards Diagnostic Ultrasound System, Nano Series Ultrasound System, mobile, cord connected, consisting of a dedicated external power supply, Elpac Electronics, model 4083F, a control unit, model NanoMaxx or NanoPICC with ultrasound transducers, a dock/port replicator, model Nano Dock, V-Universal stand, PowerPark Stand Module, and accessories, rated 100-240 V, 50-60 Hz, 2.0-1.0 A, or internally powered, battery operated. Notes: 1. Type of protection against electric shock: Class I or Internally powered/battery operated 2. Degree of protection against electric shock: Transducers - Type BF; ECG - Type CF 3. Degree of protection against ingress of water: System IPX0, Ultrasound probe to IPX7 4. Degree of safety of application in the presence of a flammable anaesthetic mixture with air or with oxygen or nitrous oxide: Equipment not suitable for use in the presence of a flammable anaesthetic mixture with air or with oxygen or nitrous oxide. DQD 507 Rev. 2009-09-01 Page: 1

Certificate: 2164381 Master Contract: 201161 5. Mode of operation: Continuous 6. Environmental Conditions: Normal: 10-40 C, 15-95% rh, 700-1060hPa APPLICABLE REQUIREMENTS CAN/CSA C22.2 601.1-M90 - Medical Electrical Equipment part 1: General requirements for Safety adopted IEC 601-1 2ed (90) CAN/CSA C22.2 601.1S1-94 - Supplement No 1-94 to CAN/CSA C22.2 601.1-M90 CAN/CSA C22.2 601.1B-98 - Amendment 2 to CAN/CSA C22.2 601.1-M90 CAN/CSA C22.2 60601-2-37-03 - Medical Electrical Equipment part 2-37: Particular requirements for the safety of Ultrasonic Medical Diagnostic and Monitoring Equipment adopted IEC 60601-2-37 (01) CAN/CSA C22.2 60601-2-37A-05 - Amendment 1:2005 to CAN/CSA C22.2 60601-2-37-03 Medical Electrical Equipment part 2-37: Particular requirements for the safety of Ultrasonic Medical Diagnostic and Monitoring Equipment adopted am 1 to IEC 60601-2-37 (01), am1 (04) CAN/CSA C22.2 60601-1-1-02 - Medical Electrical Equipment part 1-1: General requirements for Safety - Collateral Standard Safety Requirements for Medical Electrical Systems adopted IEC 60601-1-1 (2000) UL 60601-1 (1st edition) - Medical Electrical Equipment part 1: General requirements for Safety Reference Standards IEC Publication 601-1 (1988) + A1 (1991) + A2 (1995) - Safety of Medical Electrical Equipment, Part I: General Requirements for Safety IEC 60601-2-37 (2001) + A1 (2004) + A2 (2005) - Particular Requirements for the Safety of Ultrasonic Medical Diagnostic and Monitoring Equipment IEC 60601-1-1(2000) -Collateral Standard: Safety Requirements for Medical Electrical Systems Subject to the followingqualifications: (1) The equipment has not been investigated for the protection against hazards of explosions in medically used rooms. (2) The main supply cord set provided with the equipment must be an approved type acceptable to the authorities in the country where the equipment is sold. DQD 507 Rev. 2009-09-01 Page: 2

Certificate: 2164381 Master Contract: 201161 (3) Evaluated to IEC/CSA 6011 Amendment 2 excluding requirements for Electromagnetic compatibility (Clause 36), Biocompatibility (Clause 48) and Programmable Electronic Systems (IEC 6060114 referenced in subclause 52.1). (4) SAFETY HAZARDS resulting from the intended physiological function of EQUIPMENT covered by this Standard are not considered. DQD 507 Rev. 2009-09-01 Page: 3

Supplement to Certificate of Compliance Certificate: 2164381 Master Contract: 201161 The products listed, including the latest revision described below, are eligible to be marked in accordance with the referenced Certificate. Product Certification History Project Date Description 2303550 August 17, 2010 Update Report 2164381 to include new transducers, new accessories and alternate construction (C/US and CB Scheme) 2164381 June 19, 2009 Diagnostic ultrasound sytem, Nano Series (CSA/CUS+CB) Page: 1

Ref. Certif. No. CA/12083/CSA IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIPMENT (IECEE) CB SCHEME SYSTEME CEI D ACCEPTATION MUTUELLE DE CERTIFICATS D ESSAIS DES EQUIPEMENTS ELECTRIQUES (IECEE) METHODE OC CB TEST CERTIFICATE CERTIFICAT D ESSAI OC Product Produit Diagnostic Ultrasound System Name and address of the applicant Nom et adresse du demandeur SonoSite, Inc. 21919 30 th Drive S.E. Bothell, WA 98021-3904 USA Name and address of the manufacturer Nom et adresse du fabricant Same as applicant Name and address of the factory Nom et adresse de l usine Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la 2 ème page Same as applicant Additional Information on page 2 Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) Input 100-240 V, 50-60 Hz, 2-1 A; or Battery Operated; Type BF Patient Applied Part (Ultrasound Transducers) and Type CF Defib-proof (ECG Leads). Type of Manufacturer's Testing Laboratories used Type de programme du laboratoire d'essais constructeur Model / Type Ref. Ref. De type WMT-011 SonoSite Nano Series Ultrasound System, consisting of external power supply, model 4083F, controller model NanoMaxx or NanoPICC, Dock, V-Universal Stand and accessories. Additional information (if necessary may also be reported on page 2) Les informations complémentaires (si nécessaire,, peuvent être indiqués sur la 2 ème page A sample of the product was tested and found to be in conformity with Un échantillon de ce produit a été essayé et a été considéré conforme à la As shown in the Test Report Ref. No. which forms part of this Certificate Comme indiqué dans le Rapport d essais numéro de référence qui constitue partie de ce Certificat Additional Information on page 2 IEC 60601-1:1988 Amendment No 1 (1991) and Amendment No 2 (1995), excluding requirements for Electromagnetic Compatibility (Clause 36), Biocompatibility (Clause 48) and Programmable Electronic Systems (Clause 52.1); IEC 60601-1-1: 2000, IEC 60601-2-37: 2001+A1 (2004); and AU, CA, CH, DK, IL, NZ, SG and US National Differences, per CB Bulletin on IECEE site. 201161-2164381 (2303550) This CB Test Certificate is issued by the National Certification Body Ce Certificat d essai OC est établi par l Organisme National de Certification CSA International 178 Rexdale Boulevard Toronto, ON M9W 1R3 Date: August 18, 2010 Signature: Tiki Wong, P.Eng., DQD 506.04 Rev. 2009-03-23 (CB Issued 2009-03) 1/1