RT 10 GG/GN The specialists for machining cast iron and aluminum from Ø 3.00 up to a drilling depth of 1 x D
RT 10 GG for cast iron 130 4-facet point & new carbide grade deliver top performance in cast iron Available in 4xD, xd and 10xD lengths, the newest additions to Guhring s popular line of RT 10 GG coolant-through straightfluted carbide drills feature an aggressive, self-centering 130 4-facet point and a new, more wear-resistant carbide grade. These design modifications deliver higher cutting speeds and longer tool life when machining short-chipping cast materials and other highly abrasive metals. KEY FEATURES: Aggressive, self-centering 130 4-facet point. This point generates considerably less thrust and heat than conventional point styles. The combination of primary cutting lip and secondary heel clearance facets results in a naturally self-centering point. Performance enhancements include increased cutting edge life and accuracy. DK 2 F (K20) carbide. Developed in-house by Guhring, this carbide grade features a higher cobalt content than K grades, giving DK 2 F better wear resistance. This translates into significantly longer tool life, especially when machining abrasive materials such as cast iron. Rigid, straight-flute design. This design eliminates the spring effect coon with helical flutes and significantly increases tool rigidity. As a result, the RT 10 GG can be fed more aggressively, while delivering hole concentricity and straightness up to x better than standard HSS twist drills and up to 2x better than carbide twist drills. Double margin. Hole quality is further enhanced by the RT 10 GG s double margin effect, which provides minimal deviation from straightness and excellent self-centering performance. This feature enables the RT 10 GG to produce near-burnished hole finish, eliminating the need for secondary operations such as reaming or boring. Manufacturing specifications Point grinding: 4-facet Point angle: 130 Web thinning: G-special Helix angle: 0 Web taper: none Flute form: special, double margins Tolerance on Ø : m Coolant supply: IC through the body Series # 0 Drilling depth ~ 4xD meter to DIN 3 Dec in Fract in W/L 0.111 3.00.00 24 0.120 3.20 0.12 3.30 0.133 3. 0.13 3.0 0.141 3.0 0.14 3.0 24 0.14 2 3. 4 30 0.13 3.0 0.1 4.00 0.14 4.20 0.12 1 4.0 0.111 4.0 30 0.10 12 4. 3 0.1.00.10 0.2031 13/4.1 0.204.20 0.20.30 0.212. 0.21.0 0.21 /32. 0.220.0 0.223. 0.232.00.00 4 3 0.22.10.00 1 3 0.2441.20 0.24.30 1/4 E.3 0.220. 0.2.0 0.2.0 0.2 1/4 H. 0.2. 0.21 I.0 0.2.00 0.2.10 0.211 /32 K.14 0.23.20 0.24.30 0.213. 0.23.0 0.2 1/4.4 0.301. 0.310.00.00 1 3 0.31.10 10.00 103 1 0.322 P.20 0.32.30 0.330. 0.334.0 0.33.0 0.342.0 0.343 11/32.3 0.343.00 0.34 23/4.13 0.322.20 0.31.30 0.3.0 0.34 3/.2 0.3.0 0.31.0 0.3 W. 0.30 2/4.2 0.33 10.00 10.00 103 1 0.1 10.20 12.00 11 1 0.4134 10.0 0.4220 2/4 10.2 0.434 /1 11.11 0.42 11.0 0.424 12.00 12.00 11 1 0.443 31/4 12.30 14.00 124 4 0.421 12.0 0.000 1/2 12.0 0.11 13.00 For machining cast iron meter Dec in Fract in W/L 0.31 0.12 0.0 0.0 0.102 0.2 0.4 0.3 0.0 0.0 0.23 0.4 0. 0.4 2 RT 10 GG/GN
Series # 0 For machining cast iron Series # 00 For machining cast iron Drilling depth ~ xd to DIN 3 Drilling depth ~ 10xD to DIN 3 meter meter 13.0 14.00 14.00 124 4 14.0 1.00 133 3 1.00 1.0 1.00 1.00 133 3 1.0 1.00 143 3 1.00 1.0 1.00 1.00 143 3 1.0 20.00 13 101 1.00 1.0 20.00 20.00 13 101 Dec in Fract in W/L 0.111 3.00.00 4 3 0.120 3.20 0.12 3.30 0.133 3. 0.13 3.0 0.141 3.0 0.14 3.0 4 3 0.14 2 3. 4 0.13 3.0 0.1 4.00 0.114 4.10 0.14 4.20 0.13 1 4.30 0.132 4. 0.12 1 4.0 0.1 13 4.0 4 0.10 12 4. 0.12 4.0 0.1.00 0.2031 13/4.1 0.21.0 0.232.00.00 1/4 E.3.00 11 0.2.0 0.2. 0.2.00 0.211 /32 K.14 0.23.0 0.301. 0.312 /1.4 0.310.00.00 11 0.32 21/4.33 10.00 13 0.334.0 0.343 11/32.3 0.343.00 0.34 23/4.13 0.3.0 0.34 3/.2 0.33 10.00 10.00 13 0.1 10.20 12.00 13 114 0.3 13/32 10.32 0.4134 10.0 0.4220 2/4 10.2 0.434 /1 11.11 0.42 11.0 0.431 2/4 11.1 0.424 12.00 12.00 13 114 0.443 31/4 12.30 14.00 12 133 0.421 12.0 0.000 1/2 12.0 0.11 13.00 0.31 13.0 0.12 14.00 14.00 12 133 0.0 14.0 1.00 204 12 0.0 1.00 0.102 1.0 0.2 1.00 1.00 204 12 0.4 1.0 1.00 223 11 0.3 1.00 0.0 1.0 0.0 1.00 1.00 223 11 0.23 1.0 20.00 244 10 0.4 1.00 0. 1.0 0.4 20.00 20.00 244 10 Dec in Fract in W/L 0.111 3.00.00 1 42 0.120 3.20 0.12 3.30 42 0.133 3. 4 0.13 3.0 0.141 3.0 0.14 3.0 1 4 0.14 2 3. 121 0.13 3.0 0.1 4.00 0.114 4.10 0.14 4.20 0.13 1 4.30 0.132 4. 0.12 1 4.0 0.1 13 4.0 0.10 12 4. 2 0.12 4.0 0.1.00 0.2031 13/4.1 0.21.0 0.232.00.00 121 2 1/4 E.3.00 14 10 0.2.0 0.2. 0.2.00 0.211 /32 K.14 0.23.0 0.301. 0.312 /1.4 0.310.00.00 14 10 0.32 21/4.33 10.00 1 130 0.334.0 0.343 11/32.3 0.343.00 0.34 23/4.13 0.3.0 0.34 3/.2 0.33 10.00 10.00 1 130 0.1 10.20 12.00 20 1 0.3 13/32 10.32 0.4134 10.0 0.4220 2/4 10.2 0.434 /1 11.11 0.42 11.0 0.431 2/4 11.1 0.424 12.00 12.00 20 1 0.443 31/4 12.30 14.00 233 13 0.421 12.0 0.000 1/2 12.0 0.11 13.00 0.31 13.0 0.12 14.00 14.00 233 13 0.0 14.0 1.00 20 20 0.0 1.00 0.102 1.0 0.2 1.00 1.00 20 20 0.4 1.0 1.00 24 231 0.3 1.00 0.0 1.0 0.0 1.00 1.00 24 231 0.23 1.0 20.00 30 2 0.4 1.00 0. 1.0 0.4 20.00 20.00 30 2 RT 10 GG/GN 3
RT 10 GG/GN for aluminum 120 cone-relief point & super-tough carbide grade deliver top performance in aluminum Designed for accurate, high penetration rate holemaking in aluminum and high silicon-content aluminum, the original RT 10 GG is a soolant-through, straight-flute carbide drill that can achieve reamer-class hole quality (IT) when drilling from solid. Offered in 4xD, xd and 10xD lengths, the original RT 10 GG is now joined by a new negative-helix RT 10 GN version capable of drilling hole depths to 1xD. KEY FEATURES: Self-centering 120 cone-relief point. The steeper point angle results in a longer cutting edge, which improves the tool s selfcentering performance while delivering better hole straightness, especially in short-chipping materials such as aluminum and high silicon-content aluminum alloys. DK UF (K) carbide. This ultra-fine grain carbide was developed in-house by Guhring specifically for cutting tool applications and is 0-0% tougher than coon carbide grades. In particular, it delivers improved cutting edge strength and stability, preventing premature chipping and material loading. The ultra-fine grain size also allows tools to be given sharper cutting edges. Significantly improved tool life, better holemaking consistency and broader tool application are among the key benefits of DK UF. Rigid, straight-flute design. This design eliminates the spring effect coon with helical flutes and significantly increases tool rigidity. As a result, the RT 10 GG can be fed more aggressively, while delivering hole concentricity and straightness up to x better than standard HSS twist drills and up to 2x better than carbide twist drills. Double margin. Hole quality is further enhanced by the RT 10 GG s double margin effect, which provides minimal deviation from straightness and excellent self-centering performance. This feature enables the RT 10 GG to produce near-burnished hole finish, eliminating the need for secondary operations such as reaming or boring. Negative helix (RT 10 GN # 3). The negative helix increases the drill s dynamic stability, allowing greater holemaking depths while delivering optimum surface quality and dimensional accuracy. Manufacturing specifications Point grinding: Cone-relief Point angle: 120 Web thinning: G/GN-special Helix angle: 0 RT 10 GG Negative RT 10 GN Web taper: none Flute form: special, double margins Tolerance on Ø : m Coolant supply: IC through the body Series # Drilling depth ~ 4xD meter to DIN 3 Dec in Fract in W/L 0.111 3.00.00 24 0.120 3.20 0.12 3.30 0.133 3. 0.13 3.0 0.141 3.0 0.14 3.0 24 0.14 2 3. 4 30 0.13 3.0 3.00 0.1 4.00 0.114 4.10 0.14 4.20 0.13 1 4.30 0.132 4. 0.12 1 4.0 0.111 4.0 0.1 13 4.0 30 0.10 12 4. 3 0.12 4.0 0.1.00.10 0.2031 13/4.1 0.204.20 0.20.30 0.212. 0.21.0 0.21 /32. 0.220.0 0.2244.0 0.223. 0.2323.0 0.2343 1/4. 0.232.00.00 4 3 0.22.10.00 1 3 0.2441.20 0.24.30 1/4 E.3 0.220. 0.2.0 0.2.0 0.23.0 0.2 1/4 H. 0.2. 0.21 I.0 0.2.00 0.2.10 0.211 /32 K.14 0.23.20 0.24.30 0.213. 0.23.0 0.2 1/4.4 0.22.0 0.3031.0 0.301. 0.3110.0 0.312 /1.4 0.310.00.00 1 3 0.31.10 10.00 103 1 0.322 P.20 0.32.30 0.32 21/4.33 0.330. 0.334.0 0.33.0 0.342.0 0.343 11/32.3 0.34. 0.304.0 0.343.00 0.33.10 0.34 23/4.13 0.322.20 0.31.30 0.301. For machining aluminum meter Dec in Fract in W/L 0.3 0.34 3/ 0.3 0.31 0.3 W 0.3 0.30 2/4 0.33 0.1 0.3 13/32 0.4134 0.4220 2/4 0.4331 0.434 /1 0.42 0.431 2/4 0.4 1/32 0.424 0.443 31/4 0.421 0.000 1/2 0.11 0.31 0.12 0.0 0.0 0.102 0.2 0.4 0.3 0.0 0.0 0.23 0.4 0. 0.4 4 RT 10 GG/GN
Series # For machining aluminum Series # 13 For machining aluminum Drilling depth ~ xd to DIN 3 Drilling depth ~ 10xD to DIN 3 meter meter.0 10.00 103 1.2.0.0..0.2 10.00 10.00 103 1 10.20 12.00 11 1 10.32 10.0 10.2 11.00 11.11 11.0 11.1 11.1 12.00 12.00 11 1 12.30 14.00 124 4 12.0 12.0 13.00 13.0 14.00 14.00 124 4 14.0 1.00 133 3 1.00 1.0 1.00 1.00 133 3 1.0 1.00 143 3 1.00 1.0 1.00 1.00 143 3 1.0 20.00 13 101 1.00 1.0 20.00 20.00 13 101 Dec in Fract in W/L 0.111 3.00.00 4 3 0.120 3.20 0.12 3.30 0.133 3. 0.13 3.0 0.141 3.0 0.14 3.0 4 3 0.14 2 3. 4 0.13 3.0 0.1 4.00 0.114 4.10 0.14 4.20 0.13 1 4.30 0.132 4. 0.12 1 4.0 0.1 13 4.0 4 0.10 12 4. 0.12 4.0 0.1.00 0.2031 13/4.1 0.21.0 0.232.00.00 1/4 E.3.00 11 0.2.0 0.2. 0.2.00 0.211 /32 K.14 0.23.0 0.301. 0.312 /1.4 0.310.00.00 11 0.32 21/4.33 10.00 13 0.334.0 0.343 11/32.3 0.343.00 0.34 23/4.13 0.3.0 0.34 3/.2 0.33 10.00 10.00 13 0.1 10.20 12.00 13 114 0.3 13/32 10.32 0.4134 10.0 0.4220 2/4 10.2 0.434 /1 11.11 0.42 11.0 0.431 2/4 11.1 0.424 12.00 12.00 13 114 0.443 31/4 12.30 14.00 12 133 0.421 12.0 0.000 1/2 12.0 0.11 13.00 0.31 13.0 0.12 14.00 14.00 12 133 0.0 14.0 1.00 204 12 0.0 1.00 0.102 1.0 0.2 1.00 1.00 204 12 0.4 1.0 1.00 223 11 0.3 1.00 0.0 1.0 0.0 1.00 1.00 223 11 0.23 1.0 20.00 244 10 0.4 1.00 0. 1.0 0.4 20.00 20.00 244 10 Dec in Fract in W/L 0.111 3.00.00 1 42 0.124 1/ 3.1 0.12 3.2 0.12 3.30 42 0.13 3.0 4 0.1 /4 2 3. 1 4 0.14 2 3. 121 0.13 /32 3. 0.1 4.00 0.14 4.20 0.12 1 4.0 0.1.00 2 0.21.0 0.232.00.00 121 2 1/4 E.3.00 14 10 0.2.0 0.2. 0.2.00 0.23.0 0.301. 0.310.00.00 14 10 0.334.0 10.00 1 130 0.343.00 0.3.0 0.34 3/.2 0.33 10.00 10.00 1 130 0.1 10.20 12.00 20 1 0.4134 10.0 0.42 11.0 0.424 12.00 12.00 20 1 0.421 12.0 14.00 233 13 0.000 1/2 12.0 0.11 13.00 0.31 13.0 0.12 14.00 14.00 233 13 0.0 14.0 1.00 20 20 0.0 1.00 0.102 1.0 0.2 1.00 1.00 20 20 Series # 3 Drilling depth ~ 1xD Negative helix meter Dec in Fract in W/L For machining aluminum to DIN 3 0.1.00.00 14 10 0.232.00.00 14 10 0.310.00.00 1 13 0.343.00 10.00 21 10 0.33 10.00 10.00 21 10 0.4331 11.00 12.00 2 20 0.424 12.00 12.00 2 20 0.12 14.00 14.00 20 23 RT 10 GG/GN
Application recoendations Prerequisites for the application of RT10 GG/GN drills: Powerful machines No play in spindle bearings Alignment-accurate toolholders (Hydraulic or shrinkfit chucks recoended) Max. concentricity error of clamped tools 0.02 High coolant pressure Safety notice Pilot Holes Pilot holes are absolutely necessary when drilling >xd. If the tools are not properly supported, the centrifugal forces can break these long drills before they reach the workpiece surface. Operating speed should be kept below,000 RPM until the tool is securely inside the pilot hole. Short, rigid drills can be used to machine a pilot hole 0.01-0.02 larger than the diameter of the RT 10 GG/GN drill. Pilot hole depth should be at least 1.xD. Alternatively, the drills themselves can be used to produce their own pilot holes. Cutting speed and feed must be reduced 30-% until the pilot depth is achieved. Drill-Ø 0.0 1.00 2.00 2.0 3.1 4.00.00.30.00 10.00 12.0 1.00 20.00 2.00 31.0.00 0.00 3.00.00 Coolant pressure p [bar] 0 20 0 Feed column no. 1 2 3 4 0.004 0.00 0.020 0.02 0.032 0.00 0.03 0.12 0.10 0.10 0.20 0.31 0.00 0.00 0.02 0.032 0.00 0.00 0.03 0.12 0.10 0.20 0.31 0.00 0.00 0.012 0.032 0.00 0.03 0.03 0.12 0.12 0.10 0.20 0.20 0.31 0.00 0.30 0.00 0.014 0.00 0.03 0.12 0.10 0.10 0.20 0.31 0.31 0.00 0.30 0.0 f (/rev.) 0.010 0.01 0.00 0.03 0.12 0.10 0.20 0.31 0.00 0.30 0.0 0.012 0.01 0.03 0.12 0.12 0.10 0.20 0.20 0.31 0.00 0.00 0.30 0.0 1.20 3 10 1 20 2 Tool diameter d [] 30 24 1 12 0.014 0.020 0.12 0.10 0.10 0.20 0.31 0.31 0.00 0.30 0.30 0.0 1.20 1.00 Coolant volume V [l/min] 0.01 0.023 0.12 0.10 0.20 0.31 0.00 0.30 0.0 0.0 1.20 1.00 1.00 0.01 0.02 0.12 0.10 0.10 0.20 0.31 0.31 0.00 0.30 0.30 0.0 1.20 1.20 1.00 2.000 optimum good minimum requirement Tool material Carbide type Carbide grade Type Surface finish Internal cooling design Guhring no./standard Ø-range bright ultra fine grain with internal cooling soluble oil neat oil air UF CONVERSIONS SFM = m/min. x 3.2 IPR = /rev 2.4 PSI = bar x 14.0 Gal = liter 3. Material group Coon structural steels Free-cutting steels Unalloyed heat-treatable steels Alloyed heat-treatable steels Unalloyed case hardened steels Alloyed case hardened steels Nitriding steels Tool steels High speed steels Spring steels Stainless steels, sulphured austenitic martensitic Hardened steels Special alloys Cast iron Spheroidal graphite and malleable cast iron Chilled cast iron Ti and Ti-alloys Aluminum and Al-alloys Al-wrought alloys Al-cast iron 10 % Si > 10 % Si Magnesium-alloys Copper, low-alloyed Brass, short-chipping long-chipping Bronze, short-chipping Bronze, long-chipping Duroplastics Thermoplastics Kevlar Glass/carbon fiber Material examples, new designation (old designation in brackets) Figures in bold = material no. to DIN EN 1.003 S1(St33),1.04 P2N(StE2),1.034 P23GH(H1),1.042 P2GH(H2) E2 (St0-2), E30 (St0-2), 1.3 P00NH (WStE00) 1.01 11SMnPb30 (SMnPb2), 1.03 11SMn3 (SMn3) 1.02 4S20 (4S20), 1.02 (0S20), 1.0 4SPb20 (4SPb20) 1.02 C22, 1.11 C30E (Ck30) 1.003 C4, 1.111 C4E (Ck4) 1.001 C0, 1.1221 C0E (Ck0) 1.131 0MnSi4, 1.003 3Cr2, 1.030 2Cr4 1.10 3NiCr, 1.03 41Cr4, 1.22 42CrMo4 1.0301 (C10), 1.1121 C10E (Ck10) 1.043 3Cr4 1.2 1NiCr13 (1NiCr13), 1.131 1MnCr, 1.24 20CrMo 1.4 34CrAl 1.1 31CrMoV, 1. 34CrAlNi 1.10 CW, 1.20 102Cr, 1.230 2CrMoV 1.20 X210Cr12, 1.203 X42Cr13, 1.241 10WCr, 1.2 X4NiCrMo4 1.3243 S --2-, 1.3343 S --2, 1.3344 S --3 1.02 Si, 1.1 Cr3, 1.1 1CrV4 (1CrV4) 1.0 X12CrS13, 1.4 X14CrMoS1, 1. XCrMoS1, 1.430 XCrNiS1-1.4301 XCrNi1-10, 1.441 XCrNiTi1-10, 1.41 XCrNiMoTi 1-12-2 1. X20CrNi12 (X1CrNi1-2), 1.4122 X3CrMo1-1, 1.421 X2CrMoTi1-2 Nimonic, Inconel, Monel, Hastelloy 0.010 EN-GJL-(GG10), 0.020 EN-GJL-200(GG20) 0.02 EN-GJL-20(GG2), 0.03 EN-GJL-30(GG3) 0.00 EN-GJS-00-(GGG0), 0.3 EN-GJMW-30-4(GTW3) 0.00 EN-GJS-00-2(GGG0), 0.10 EN-GJMB-00-2(GTS0) 3.024 Ti,, 3.114 TiAlSn2,, 3.124 TiCu2 3.14 TiAlZr, 3.1 TiAlV4, 3.14 TiAl4Mo4Sn2,, - TiAlMo1V1 3.02 Al,, 3.231 AlMgSi1, 3.31 AlMg1 3.01 AlMgSiPb, 3.132 AlCuMg1, 3.324 AlMg3Si, 3.43 AlZnMgCu1, 3.2131 G-AlSiCu1, 3.213 G-AlSiCu3, 3.23 G-AlSi 3.21 G-AlSi12, 3.23 G-AlSi12Cu, G-AlSi12CuNiMg 3.200 MgMn2, 3.12.0 G-MgAlZn1, 3.12.0 G-MgAlZn1 2.000 SE-Cu, 2.1020 CuSn, 2.10 G-CuSnZnPb 2.03 CuZn3Pb2, 2.01 CuZn3Pb3, 2.0 CuZn43Pb2 2.020 CuZn20, 2.02 CuZn33, 2.0332 CuZn3Pb0, 2. CuSnZnPb, 2.110 CuPbSn, 2.11 CuPb10Sn 2.00 CuNi1Zn1Pb 2.01 CuAl, 2.00 CuAlMn, 2. CuSn10 2.0 CuAl11Ni, 2.124 CuBe2 Bakelit, Resopal, Pertinax, Moltopren Plexiglass, Hostalen, Novodur, Makralon Kevlar GFK/CFK Tensile Strength N/ 2 00 >00- -0 00 00- -0-0 0-1200 0-0 0-1200 -0 0-1200 -0 0-0 1200-1200 0 00 00 0 00 00 00 >00- -0 Hardness 330 HB -4 HRC >4-0 HRC 2 HB <300 HB 2 HB <300 HB 30 HB Coolant RT 10 GG/GN
4xD xd 10xD 1xD Solid carbide DK UF DK 2 F K K20 RT 10 GG Solid carbide DK UF DK 2 F K K20 RT 10 GG Solid carbide DK UF DK 2 F K K20 RT 10 GG Solid carbide DK UF K RT 10 GN 3-24 0 3-20 3-24 0 3-20 13 3-1 00 3-20 3-14 Negative Helix v c m/min Feed column no. v c m/min Feed column no. v c m/min Feed column no. v c m/min Feed column no. 120 0 2 2 120 0 2 2 120 0 1 1 120 0 1 3 330 3 330 3 330 3 330 2 2 2 2 110 110 110 110 4 Tools with bold feed column nos. are preferred choice. RT 10 GG/GN
Guhring, Inc. P.O. Box 43, Brookfield, WI 300-043 Shipping Address Guhring Corporation 144 Coerce Avenue 20 Steckle Place, Unit #14 Brookfield, WI 304 Kitchener, ON N2E 2C3 Tel (22) 4-30 (0) -10 Tel (1) 4-4 (0) -202 Fax (22) 4-0 Fax (1) 4-24 West Coast Distribution Center 121 Gothard Street Huntington Beach, CA 24 Tel (14) 41-32 (0) -202 Fax (14) 41-32 Our product range: 1. Drilling Tools Twist drills Ratio drills Micro-precision drills Oil feed drills Subland drills Center drills Core drills Gun drills NC spot drills 2. Thread Cutting Tools Hand taps Machine taps and fluteless taps Oil feed taps and oil feed fluteless taps Thread milling cutters Dies 3. Milling Cutters Ratio end mills Slot drills End mills Radius profile cutters Hard profile cutters Diesinking cutters 4. Reaming Tools HSS and HSS-E reamers Carbide reamers Taper pin reamers Hand reamers. Countersinking Tools Countersinks, counterbores and spot facers Short counterbores Back spot facers. Cutting Tools in ultra-hard materials Cermet and ceramic tools PCD- and PCB-tipped tools. Coated Tools A-tools, TiAlN coated C-tools, TiCN coated F-tools, FIREX coated S-tools, TiN coated M-tools, MolyGlide coated Super A (AlTiN) coated. Modular Tooling Systems Tooling system GM 300 for rotary and stationary tools, offering a large combination of toolholding possibilities Flexible tooling system GE a tooling system for the combined machining operations facing, chamfering, boring, centering etc. Cartridge tooling system DP 200 with indexable inserts for roughing and finishing operations in complex workpieces. Special Tools to sketch or drawing, the more complex, the better 10. Carbides for precision cutting tools, for metal forming and punching tools 11. Tungsten Carbide Forming Tools for the production of nuts and bolts Cold forming tools Heading die inserts Punching pins 12. HSC Motor Spindles, Hydro expansion chucks, Shrinkfit chucks and systems 13. Tool Restoration Service Regrinding, recoating, tool management Guhring, Inc. 200 FORM 01-0 (/0)