ULTRA CATAL ALOG
1 02 index a c [ < ] 3 4 way bottle bay 4 way feature end frame hardware metal top panel perf back panel shelves solid back panel wood base accessories base bulkhead center bottom arm tie down cover plate cross bar end bottom arm tie down flange bracket glides hang rod components heavy duty wallmount standard leveler standard wall tie bracket super structure locking key super structure post super structure u bar top cap anchor bracket top cap bracket touch up paint upright & bottom arm tie down wallmount standard back panels perf, 4 way perf, extender perf, feature end frame perf, gondola slatwall, extender slatwall, feature end frame slatwall, gondola solid, 4 way solid, bottle bay solid, extender solid, feature end frame solid, gondola square cut back room back room system base components base nose base nose end cap electrical floating kick plate floating kick plate flush base 34 34 34 34 34 34 34 39 41 39 41 41 37 39 37 37 37 39 41 39 37 34 26 33 25 26 33 25 34 46 26 33 25 25 55 24 24 24 24 24 24 bottle bay double bottom double end panel double top hardware pack overlay end panels shelves single back brace single base cover single bottom single end panel single top solid back panels bottom arms & decks center bottom arm deck end bottom arm caster components brace caster channel hardware contour end base contour end base cornice metal front metal return metal shelf mount bracket telescoping bracket 45 46 46 46 47 47 47 47 47 46 22 22 22 38 38 38 38 40 40 40 40
4 [ > index c u 102 ] cross components cross tie replacement top cap slatwall tie bar tie bar top cap 23 23 23 23 23 23 security case components glass door assembly metal end panels hardware 35 35 35 shelving options feature end frame bottom angle feature end frame hardware perf back panel side rail sign stem fitting slatwall back panel solid back panel t brace top channel 32 31 32 33 32 32 33 33 31 32 3" wire fencing basket/shelf brackets book shelf adapter endless wire basket glass shelf product retainer reversible wire shelf shelf key 28 29 28 29 29 28 29 28 standard & heavy duty shelves gondola standards center standard end standard extender standard information base & extender standard assembly color information customer directed move outs exploded gondola & wallcase gondola & wallcase component specifications open back components terms & conditions of sale unbalanced load calculations unbalanced load ratings outrigger & widespan outrigger widespan 21 21 21 20 8 9 18 1217 19 7 10 11 55 56 heavy duty shelf standard shelf under counter cabinets 3 drawer locked narcotics 3 drawer vial/bottle 4 drawer accessory 5 drawer accessory 5 drawer RX adjustable shelf back splash basic open counter top drawer & half door dual shelf half modular high rise end panel locked drawer over sink printer printer pullout sink waste 27 27 53 52 50 53 54 54 49 54 50 49 52 54 50 53 52 49
1 02 index w z [ < ] 5 WireFlex akro bin base deck island monitor tray reinforced cross bar shelf speedwall telephone tray tray divider vial cap bin wall wallmount standard 44 43 42 44 44 43 43 44 44 44 42 43
1 02 terms & conditions of sale [ < ] 7 Price and Acceptance: Streater reserves the right to change its s and other terms and/or conditions of sale without notice. All orders placed shall be in writing and become effective only upon acceptance by Streater at its offices in Albert Lea, MN. Streater at its discretion may add handling charges depending on order and/or order requirements. Taxes: Buyer agrees to pay all taxes which Streater may be required to assess. If buyer claims a tax exempt status, buyer will provide Streater with a valid taxexemption certificate. Payment Terms: Payment to Streater will be cash with order or net days to qualified buyers, upon approval by Streater Credit Department. Overdue payments will be assessed interest charges at the legal rate of the State of Minnesota or the state of the buyer's residence, whichever is greater. Freight and Delivery: Freight is F.O.B. Albert Lea, MN. Method and route of delivery are at Streater's discretion unless Streater is furnished with complete shipping instructions at least 10 days before the scheduled ship date. Timesensitive delivery will be handled at Streater's discretion. Quotations for timesensitive delivery are available upon request. Freight charges will be prepaid and added to the invoice unless otherwise instructed. Streater will endeavor to ship on the requested ship date and every effort will be made to fill orders completely; however, it may be necessary at times to backorder. Streater will not be liable for any delay in the performance of any order or contract, or in the delivery of any goods, or for any damages resulting from such delay, when such delay is due to fire, riots, acts of God, strikes or other events beyond the control of Streater. Freight and Damage Claims: Freight is F.O.B. Albert Lea MN. What this means is that title to the product is passed on to you when the freight carrier picks up the shipment from Streater and signs the bill of lading. Any freight damage and resultant claims are between you and the freight carrier. It is your responsibility to file a freight claim. Loss of Freight: Compare the counts of the bill of lading to what you actually receive. Any exception must be noted on the carriers delivery receipt. Failure to note any exception at this time will result in the carrier denying your claim. Damage of Freight: Damage to goods received must be noted on the carrier's delivery receipt before the driver leaves the place of delivery. Ask the driver for claim forms. If the driver does not have any forms, call the carrier and request claim forms be mailed to you. Generally, if the damage to the product exceeds $500.00, the carrier must be called for an inspection. Salvage must be held for the carrier (Very important). Concealed Damage: If goods arrive in apparently good condition, but there is concealed damage, contact the carrier and ask for the goods to be inspected. Keep the product and the packaging material until they have been inspected. A claim needs to be filed with the carrier. Returned Goods: No equipment may be returned without the advance written approval of an authorized Streater representative. Only stock catalog items may be returned within 60 days of original delivery and items must be in unused condition. A handling and restocking charge of 20 percent of net will be assessed on all returns. Buyer will forward all returns to Streater freight prepaid and all items must be properly packaged. Warranty: Streater warrants to original purchaser that the products it manufactures shall be free from defects in material and workmanship and will conform to applicable specifications, drawings, samples, and descriptions. This warranty shall extend for a period of one year from date of delivery to original purchaser for use. Streater, at its option, may repair or replace any products which, upon Streater's inspection, prove to be defective. Except as set forth herein: THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY. UNDER NO CIRCUMSTANCES SHALL STREATER BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES INCURRED BY ORIGINAL PURCHASER AS A RESULT OF STREATER'S PERFORMANCE UNDER THIS ORDER.
8 [ > color information 102 ] STANDARD COLORS TYPE SET UP COST LEAD TIME COLORS Metal None Normal 015 Decor White 0LA Frosty White 0PP Platinum Plus 025 Black 0KM Dove Gray Wood None Normal 015 Decor White 0LA Frosty White 0PP Platinum Plus 0KM Dove Gray Base Components None Normal 025 Black 013 Dark Bronze Plated Components (where indicated) None Normal 082 Zinc plating (satin) 081 Chrome (bright) OPTIONAL COLORS Bottle Bay None Normal 0LA Frosty White $500 for wood $500 for metal per Purchase Order Normal CUSTOM COLORS As Quoted As Quoted 0GX Skyline Gray 0J8 Bright White 0 Bright Blue 0MT Liberty Red 0KA Charcoal 013 Dark Bronze (when not used on base components) 025 Black (wood only) Per customer request
1 02 customer directed move outs [ < ] 9 Customer requested changes to ship dates are subject to approval by Streater. Every reasonable effort will be made to accommodate these requests without additional charges to the customer. However, customer requested moveouts within five (5) working days of the scheduled ship date will be subject to the following: 1. Surcharge A. Orders scheduled for picking,packing and loading, but not yet worked on by the warehouse: LTL orders (less than a full semitrailer load) will be assessed 5% of the net selling of the order as a handling fee minimum $50/maximum $250 B. Trailerload d order assessment will be determined by Vice President of Sales or Vice President of Manufacturing. C. Jobs picked and sitting on loading dock, but not yet loaded: LTL orders will be assessed 10% of the net selling of the order as a handling fee minimum $100/maximum $500. Trailerload d order: load trailer, invoice customer and charge customer the storage charge for each trailer. For orders in process of being loaded, the assessment would be the same as the bullet above. There is a 20% restocking charge if it is necessary to unload a trailer.
SECTION A 10 [ > unbalanced load calculations 102 ] When heavily loading one side of your wall or gondola shelving, it is important to determine if you are creating an unbalanced load that exceeds the maximum design load (SEE LOAD CAPACITY CHART ON PAGE 106). The sample calculation below illustrates how you can determine your unbalanced load in inchpounds. NOTE: Inchpounds are a measure of the shelf loads acting at a distance (½ shelf depth) from the standard (upright). SAMPLE CALCULATION STARTER / ADDON UNIT TYPE USED FOR ILLUSTRATION CALCULATE THE UNBALANCED LOAD ACTING ON THIS STANDARD Side 1 Side 2 Side 1 Side 2 200# 150# 200# 16" 8" 8" 16" 8" 16" 200# 18" 400# 150# 200# 200# 400# 16" 18" 200# 400# 9" 9" 18" 18" 200# 400# 9" 9" 18" 18" 400# 9" 400# 9" SECTION B 18" 400# Side 1 Side 2 200# Shelf depth 2 x Shelf load 2 8" 9" 9" 8" 9" 9" no load 8" 9" 9" x x x x x x x x x total (Section A & B) A 100# 200# 200# 75# 100# 100# 100# 200# 200# Side 1 800"# 1800"# 1800"# 0 4400"# 400# B Side 2 600"# 900"# 900"# 800"# 1800"# 1800"# 6800"# 18" SECTION A Subtract the smaller from the larger Total unbalanced load acting on standard SECTION B 6800"# 4400"# 2400"# NOTE: Shelf depth is divided by 2 because an evenly distributed shelf load is calculated as a total load at center of shelf depth. Shelf load is divided by 2 because a shelf load is supported by 2 standards. Deck load does not contribute to unbalanced load.
1 02 unbalanced load capacity ratings [ < ] 11 UNIT TYPE 2½" Standard STARTER one unit, with 2 end standards (single uprights) STARTER/ADDON any one unit at either end of run with1 end standard & 1 center standard (double upright) STARTER/ADDON/FEF any end unit (1 end standard & 1 center standard) at either end of run with feature end attached ADDON/ADDON any unit within a run with 2 center standards (double uprights) INCHPOUND CAPACITY 3,400"# 9,500"# 12,000"# 12,000"# SPECIAL NOTES: Maximum height to depth ratio is 5:1. Any situation where the height of a standard is more than 5 times the length of the bottom arm must be approved by Streater engineering department. The maximum unbalanced load on shelves above the joint on an extension standard (upright) should not exceed 2500 inchpounds. The loads applied to perforated back panels should not exceed 150 lbs. per panel. Shelf locking keys increase inchpound capacity by approximately 15%. Please check with Streater engineering department for verification if unfamiliar with loading conditions.
12 [ > gondola & wallcase specifications 102 ].56" 1.38" 1.00" 1.81" 50.56" 55.56" 60.56" 65.56" 70.56" 85.56" 95.56" 12" 14" 16" 18" 20" 22" 24" 28" 7.18" full gondola trimline 2.50" half gondola & wallcase trimline 1.00" full gondola trimguard 4.00" with optional base nose added 12" 14" 16" 18" 20" 22" 24" 28".87" 7.18" 2.12" 1.38" 1.84" 50.56" 55.56" 60.56" 65.56" 70.56" 85.56" 95.56" 2.50" half gondola & wallcase trimguard
1 02 contour end & feature end specifications.29".29".29" [ < ] 13 10.5" 12.5" 14.5" 16.5" 22.5" 1.00" 50.56" 55.56" 60.56" 65.56" 70.56" 85.56" 95.56" 1.38" 1.84" 7.25" 4.00" 2.12" 13" 15" 17" 19" 25" 2.12" STANDARD DUTY 28.5" 32.50".50" 40.50" 44.50".50" trimguard contour end base with feature end frame 10.5" 12.5" 14.5" 16.5" 22.5" 13" 15" 17" 19" 25" 1.00" 1.38" 2.12" 7.25" 50.56" 55.56" 60.56" 65.56" 70.56" 85.56" 95.56" trimline contour end base with feature end frame 2.12".29".29".29" 28.5" 32.50".50" 40.50" 44.50".50"
14 [ > gondola & wallcase component specifications 102 ] standards cross tie.49".56".57" 2.50" 2.50" 2.46" end standard.73".375" 1.25" center standard 29.75 35.75" 47.75" actual heights of standards 37½" 50½" 60½" 65½" 70½" 85½" 95½" 12 gauge steel baked acrylic enamel ", " & " module lengths kwikfit no attachment hardware required 16 gauge steel baked acrylic enamel top cap end bottom arm.75" 1.43" ", " & " module lengths kwikfit no attachment hardware required 16 gauge steel baked acrylic enamel available with electrical outlet tie bar 2.49" 1.70" 1.16".75" 29.97" 35.97" 47.97" 29.75" 35.75" 47.75" ", " & " module lengths kwikfit no attachment hardware required 18 gauge steel baked acrylic enamel nominal lengths 12" 14" 16" 18" 20" 22" 24" 28" kwikfit no attachment hardware required 13 gauge high strength steel baked acrylic enamel center bottom arm 1.50." 6.22" 6.22" 10.78" 12.78" 14.78" 16.78" 18.78" 20.78" 22.78" 26.78" 10.78" 12.78" 14.78" 16.78" 18.78" 20.78" 22.78" 26.78" nominal lengths 12" 14" 16" 18" 20" 22" 24" 28" kwikfit no attachment hardware required 14 gauge steel with 12 gauge steel hooks baked acrylic enamel
1 02 gondola & wallcase component specifications [ < ] 15 base deck trimguard base nose 12" 14" 16" 18" 20" 22" 24" 28" 29.88 35.88" 47.88" 1.84" 2.13".58" 47.97" 35.97" 29.97" 2.09" ", " & " module lengths one piece 23 gauge embossed steel deck pan with rolledin 1¼" ticket moulding welded end plates & reinforcement hat sections two row perforations front & rear baked acrylic enamel ", " & " module lengths protects front of base deck from carts, etc. 18 gauge steel baked acrylic enamel optional item, order as added item to trimline gondola kits trimline floating kick plate.44" trimguard base nose end cap.94" 6.31" 29.97" 35.97" 47.97" 1.83".60" ", " and " module lengths 18 gauge steel baked acrylic enamel available with electrical knockout nominal 1/4" back panel finished one side Perforated or solid backs in choice of standard or optional color baked enamel (see color chart for reference) 2.10" finishes off ends of trimguard base nose two per half starter module & four per full starter module 18 gauge steel baked acrylic enamel optional item, sold individually nominal 3/4" slatwall back panel finished one side 35.12" 47.12" Fixture Height " 56" " 66" 71" " 96" Actual Height 43.50".50" 53.50" 58.50" 63.50" 78.43" 88.43" slatwall backs in choice of standard or optional color baked enamel (see color chart for reference) with or without steel Tslot inserts
16 [ > gondola & wallcase component specifications 102 ] flush base wallcase anchoring devices.".105" 7.38" 2.12" *regular duty(21/2" wallcase) " 96" heights includes 2 standard wall tie brackets per module.65" 29.97" 35.97" 47.97"." 1.50" ", " " module widths retains bottom of back panel when no base is required 20 gauge steel baked acrylic enamel standard wall tie bracket 12 gauge steel (82) zinc plated contour end base trimguard shown 1.78" 26.50".50" 34.50" 38.50" 42.50" 46.50" 14.00" 16.00" 18.00" 24.00" 4.00" top cap anchoring bracket 12 gauge steel (82) zinc plated 14" 16" 18" 24" nominal depths 26" thru 46" nominal widths on standard duty fits 14" thru 22" bases both sides three row perforations front and three row perforations rear baked acrylic enamel available in trimguard and trimline feature end frame.88" 1.50" Actual Height 43.08".08" 53.08" 58.08" 63.08" 78.08" fits gondola heights through " " " " module widths choice of 1/4" back panels support plate hooks on bottom arms 11/4" slot spacing frame, 12 gauge steel baked acrylic enamel.29".29".29" Fixture Height " 56" " 66" 71" ".50" 2.00".94" 1.02".19" end bottom arm tie down 12 gauge steel (82) zinc plated 1.02" 3.54" 1.50" center bottom arm tie down 12 gauge steel (82) zinc plated.94".19"
2 02 gondola & wallcase component specifications [ < ] 17 caster assembly 2 " 35.87" 47.87" " " module lengths steel support 12 gauge steel 2" dia. casters caster capacity: half gondola 550 pounds per section full gondola 800 pounds per section superstructure post 1.00" top view 1.50" adjustable height with use of key through slots and resting on top cap 13 gauge steel baked acrylic enamel
18 [ > exploded gondola & wallcase 202 ] basic gondola and wallcase 1 3 4 2 3 10 8 1 6 1. 21/2" end standard two per starter module 2. 21/2" center standard one per addon module 3. top cap one per module 4. tie bar one per module " thru 96" height *4a. slatwall tie bar used when instaling slatwall one per module " thru 71" two are needed for anything higher 6 5 8 12 9 11 7 9 5. cross tie one per module 6. end bottom arm one pair per half starter module two pairs per full starter module 7. center bottom arm one per half addon module two per full addon module 1 6 3 5 4 8 12 9 2 11 7 3 10 8 1 9 6 trimguard base 8. base deck one per half module two per full module 9. trimline floating kick plate one per half module two per full module 10. 1/4" back panel ordered separately *11. trimguard base nose (added to floating kick plate) one per half module two per full module *12. trimguard base nose end cap two per half starter module four per full starter module *13. flush base one per half module *14. extender standards one per end standard two per center standard *These items are optional trimline base
2 02 open back with cross tie exploded open back [ < ] 19 3 1 3 2 4 1 4 5 5 To build 1 open back, 2 end standards, 2 cross ties, 2 tie bars and 2 top caps will be needed To add on to an open back, 1 center standard, 1 cross tie, 1 tie bar and 1 top cap will be needed If back panels are desired, see page 25 See color chart for paint color choices open back with flush base 3 1 4 5 13 2 3 4 5 13 1 To build 1 open back, 2 end standards, 2 cross ties, 2 tie bars, 2 top caps and 1 flush base will be needed To add on to an open back, 1 center standard, 1 cross tie, 1 tie bar, 1 top cap, and 1 flush base will be needed If back panels are desired, see page 25 See color chart for paint color choices
20 [ > base & extender standard assembly 202 ] base components 2 end bottom arms,1 base deck and 1 kickplate make up a single base. 1 center bottom arm, 1 base deck and 1 kickplate make up an add on base kit Levelers, see page Base bulkhead for heavy deck loads, see page Trimguard base nose, see page 24 Designate paint color for deck and paint color for bottom arms and kickplate (see color chart for paint color choices) 8 7 8 9 6 6 9 extender standards Each starter should have 2 end extender standards, 1 tie bar, and 1 H channel (5" extender assembly does not need a tie bar) Each addon should have 2 end extender standards 1 tie bar, and 1 H channel Order back panel separately (see page 26) Designate paint color (see color chart for paint colors available) 14 4 14 4 14
2 02 end standard gondola standards 38 56 66 71 96 08400 0840063 0840062 08400 0840060 0840059 0840058 0840056 [ < ] 5.0 6.6 7.3 8.0 8.7 9.4 11.4 14.6 21 27.40 22.35 24.35 26.50 28.55.60.65 41.50 Used at ends of each run of fixtures To add levelers put a L at the beginning of the part number EX. L8400 and add $3.00 per standard. To level standards yourself see page For glides see page center standard extender standard 05 10 15 25 38 56 66 71 96 0871201 0871200 087120035 087120034 087120033 087120032 087120031 087120029 10.0 13.1 14.5 15.9 17.4 18.9 22.7 29.2 56.10 46.00.60 54.35 57.00 62.25 76.10 85.85 Used in every addon unit in a run of fixtures To add levelers put a L at the beginning of the part number EX. L8400 and add $3.00 per standard. For levelers see page For glides see page 25 extender center standard hardware description qty. 088000500 088000505 088000506 088000508 5 15 extender center standard hardware 0006019 000601156 000601166 0006019 000601156 000601166 1/4 20x3/4 screw 1/4 20 hexnut 1/4 washer 1/4 20x3/4 screw 1/4 20 hexnut 1/4 washer For adding height to existing gondolas and wallcases Back panels sold separately on page 25 Order 2 extender standards and hardware to assemble a center extender standard. 1.0 1.8 3.8 5.0 2 2 2 3 3 3 32.50 35.05 39.10 45.40 description qty..10.10.10.10.10.10
22 [ > bottom arms & decks 202 ] end bottom arm center bottom arm deck Recommended evenly distributed load capacity: 600# 12 thru 22 800# 24 thru 28 Formed tag moulding on front edge Double row perforations front and rear See color chart for paint colors available Add base bulkhead (see page ) for an additional 500 lbs capacity. Must be ordered in quantities of 4 12 14 16 18 20 22 24 28 087041545 087041546 087041547 0870415 087041549 087041550 0870415 087041553 Indicate left or right hand To order bottom arms leveled add L to the beginning of the part number EX. L87041445 and add $2.60 per bottom arm. To level bottom arms yourself see page For glides see page Must be ordered in quantities of 5 12 14 16 18 20 22 24 28 087041521 087041522 087041523 087041524 087041525 087041526 087041527 087041529 2.2 2.7 3.1 3.5 3.9 4.3 4.7 5.4 9.25 10.40 11.65 12.90 14.15 15.35 16.50 18.75 Used with center standards To order bottom arms leveled add L to the beginning of the part number EX. L87041445 and add $2.60 per bottom arm. To level bottom arms yourself see page For glides see page Must be ordered in quantities of 5 depth 12 14 16 18 20 22 24 28 12 14 16 18 20 22 24 28 12 14 16 18 20 22 24 28 width 0135812 0135814 0135816 0135818 0135820 0135822 0135824 0135828 0135812 0135814 0135816 0135818 0135820 0135822 0135824 0135828 0135812 0135814 0135816 0135818 0135820 0135822 0135824 0135828 3.1 3.5 3.9 4.8 4.9 5.2 5.5 6.2 5.9 6.9 7.9 8.5 9.1 9.2 11.5 13.4 6.8 7.5 9.2 9.8 10.5 11.1 12.9 15.3 8.8 10.2 11.9 14.2 15.0 16.5 15.9 19.7 13.90 15.00 16.15 17. 18.40 19.55 20.65 22.70 23.45 24.85 29.15 31.45 34.75.50 41. 47.35 23.45 24.85 29.15 31.45 34.75.50 41. 47.35 28.15 33. 35.60 41.85 45.45 47.20 53.70 58.25
2 02 top cap cross components 0840214 0840213 0840212 [ < ] 2.2 2.6 3.4 23 8.70 8.70 10.80 Used to cover top edge of back panel, fits into standards Has hole for superstructure post Must be ordered in quantities of 20 replacement top cap 2.7 3.1 Needed to replace top cap when using extenders with open backs Prices available upon request tie bar slatwall tie bar cross tie 0840208 08402 0840206 1.3 1.5 2.1 5.65 5.65 7.05 Used in gondola and wallcases at " and higher Must be ordered in quantities of 20 08456 08457 1.6 1.7 Needed to replace standard tie bar when unit has slatwall back panels Must be ordered in quantities of 20 084038180 084038181 084038182 1.8 2.1 2.8 Used in gondola and wallcases to retain panel Must be ordered in quantities of 20 5.75 6.25 7.45 7.45 10.70
24 [ > base components 202 ] floating kickplate 0840549 0840550 08405 3.1 3.7 5.0 Snaps into bottom arms Must be ordered in quantities of 10 12.90 12.90 16.40 electrical floating kickplate Has knockout for electrical hookup Prices available upon request 3.7 5.0 flush base base nose base nose end cap 084038175 084038176 084038177 3.3 3.8 4.6 Finishes off units without base decks Must be ordered in quantities of 10 Converts trimline fixture to trimguard fixture Provides extra bump protection for fixture Must be ordered in quantities of 10 0840559 0840560 0840580 2.7 3.6 Finishes end of base nose Snaps into place, d individually 33.60 33.60 37.90 9.70 13.65 0.1 0.60
2 02 back panels back panels [ < ] 25 square cut back panels width height 96 96 085003250 0850032 31.0 47.40 32.6 43.55 Solid (32) or perf (3250) ¼" hardboard, Painted 1 face baked enamel Specify paint color slatwall backs width height 56 66 71 96 27.2 29.8 32.4 35.1 37.8 41.0 47.3 solid back panels width height 56 08214 08215 08218 38 56 66 71 96 38 56 66 71 96 08272 08222 08224 08225 08226 08227 08228 082 08281 08232 08234 08235 082 08237 08238 08240 ¼" hardboard, Painted 1 face baked enamel Specify paint color (" only come in color 15) 9.8 10.9 15.9 7.6 10.6 11.8 13.1 14.3 15.5 19.1 21.6 10.1 14.2 15.9 17.5 19.1 20.8 25.7 29.0.75 33.95 43.50 20.90 28.65.75 33.95 43.50 47.15 50.95.25 21.10 31.80 34.00 34.00 44.35 50.80 56.50 63.50 perf back panels width height 56 38 56 66 71 96 38 56 66 71 96 08314 08315 08318 08372 08322 08324 08325 08326 08327 08328 083 08381 08332 08334 08335 083 08337 08338 08340 9.3 10.3 15.1 7.2 10.1 11.2 12.4 13.6 14.7 18.1 20.5 9.6 13.5 15.1 16.6 18.2 19.7 24.4 27.5 ¼" hardboard Available in painted baked enamel Specify paint color (" in color 15 only) 34.65 39.60 57.35 22.50 32.55 34.80 39.60 45.10 46.45 57.35 64.45 23. 33.70.10 41.40 46.70.00 59.50 66.95 56 66 71 96 slatwall w/steel T slot inserts 56 66 71 96 42.6 46.7 50.9 55.1 59.3 64.3 75.7 56 66 71 96.2 39.7 43.3 46.8 50.4 54.5 63.9 56.9 62.3 67.9 73.4 79.1 85.5 99.2 Painted finish, with or without steel T slot inserts. Tslots 3" o.c. ¾" MDF, unfinished on back side Requires slatwall tie bar, see page 23 Specify paint color Prices available upon request
26 [ > extender back panels 202 ] extender back panels solid back panels width height 05 10 15 25 05 10 15 25 0855742 08545 0854508 08540 0855743 0854520 0854521 0854523 1.2 2.4 3.6 6.1 1.6 3.2 4.9 8.1 ¼" hardboard, Painted 1 face baked enamel Specify paint color Prices available upon request H channel perf back panels width height 05 10 15 25 05 10 15 25 08557 0854468 0854469 0854471 0855737 08541 08542 08544 1.1 2.3 3.4 5.8 1.5 3.1 4.6 7.7 ¼" hardboard, Painted 1 face baked enamel Specify paint color Prices available upon request slatwall back panels width height 05 10 15 25 05 10 15 25 ¾" MDF Painted finish, with or without steel T slot inserts. Tslots 3" o.c. Requires slatwall tie bar, see page 23 Specify paint color Prices available upon request 0010223 0010224 0010225 Used to join 2piece back panels Colors available KM, 25,15,clear.1.1.1 2.65 3.05 3.70
2 02 standard 4 position shelf standard & heavy duty shelves depth width [ < ] 27 10 12 14 16 18 01340 01342 01344 01346 01348 5.6 7.3 8.0 9.2 9.9 17.35 21.00 23.60 26.95 28.70 load limits (lbs.) shelf depth 10 12 14 16 18 20 22 heavy duty 2 position shelf load limits (lbs.) shelf depth 22 24 28 350 500 500 500 500 600 600 600 600 600 600 400 400 500 500 500 500 500 500 500 500 400 400 350 350 Load capacities listed represent the maximum evenly distributed weight that is recommended for each shelf. Reduce capacities by % if only the front of the shelf is to be loaded. Load capacities listed represent the maximum evenly distributed weight that is recommended for each shelf. Reduce capacities by % if only the front of the shelf is to be loaded. 10 12 14 16 18 20 22 10 12 14 16 18 20 22 One piece shelf pan with 1¼ ticket moulding Four position brackets, 12 upslant, level, 15 & downslant ½ Double row perforations 1 on center front and rear See color chart for paint colors available Textured steel Must be ordered in quantities of 4 depth 22 24 28 22 24 28 width 01340 01342 01344 01346 01348 0134620 0134622 01340 01342 01344 01346 01348 0134620 0134622 0134722 0134724 0134728 0134722 0134724 0134728 7.4 8.3 9.1 10.6 11.3 12.1 12.8 9.2 10.2 10.4 13.3 15.6 16.6 17.5 15.6 17.7 20.8 20.4 22.9 22.9 One piece shelf pan with 1¼ ticket moulding Two position brackets, level, 20 downslant ½ Double row perforations 1 on center front and rear See color chart for paint colors available Textured steel Must be ordered in quantities of 2 20.80 23.10 25.55 29.60 31.60 34.75 37.25 25.05 27.85 34.00.05 41.90 45.45 47.90. 57.40 71.15 63.80 71.15 83.55
28 [ > shelving options 202 ] 3 wire fencing front & back fencing 08067 08068 front to back fencing 10 089 12 08080 14 08081 16 08082 18 08083 Chrome plated 3 tall 0.9 1.2 0.3 0.4 0.4 0.5 0.5 10.00 11.50 5.00 5.00 5.00 5.50 6.00 book shelf adapter 084453140 084453141 14.7 19.2 18.40 25.45 7½ tall back Usable space 3 less than the nominal shelf depth Hooks into back row of perfs on shelf Order shelves separately See color chart for paint colors available book shelf shelf key product retainer 084100027 0.1 0.75 Keeps shelves in alignment when heavy loads are on the shelf Zinc finish 0870112 087011212 084024771 084024772 084024773 8 tall back 8 deep See color chart for paint colors available 0.8 0.9 1.0 5.05 5.80 7.15 1 tall steel installs into the front row of perforations on the shelf See color chart for paint colors available Must be ordered in quantities of 10 55.95 57.45
2 02 glass shelf components shelving options depth width glass shelf brackets 12 084010156R/L 14 084010158R/L support channel 084159204 084159208 glass top 12 1600212 14 1600214 12 1600212 14 1600214 silicone 000632025 [ < ].9.9 1.3 1.8 9.8 10.1 11.5 13.4 1oz 29 10.15 11.20 8.90 10.05 33.00 33.50 37.50 43.50 5.90 endless wire basket Specify left or right for brackets Order 1 pair of brackets, 1 support channel, 1 glass top, & 1 tube of silicone per shelf asselmbly 2 position brackets, level and 20 downslant depth 12 14 16 width 0831935 0831934 0831933 8.1 8.5 9.0 reversible wire shelves basket/shelf brackets Prices available upon request Prices available upon request Specify left or right Order same as shelf See color chart for available colors Prices available upon request 12 14 16 wire dividers 12 14 16 8½ tall back, 6 sloped front Chrome finish Order wire dividers separately Order brackets separately (see below) Weight capacity on all s is 0 lbs., uniform load depth 18 20 22 24 18 20 22 24 12 14 16 18 20 22 24 width 0831928 0831927 0831926 0831946 0831945 0831944 0831959 0831958 0831957 0831956 0831952 08319 0831950 0831949 087060424R/L 087060425R/L 087060426R/L 087060427R/L 087060428R/L 087060429R/L 0870604R/L 9.8 10.8 11.5 0.9 1.1 1.3 6.6 6.7 6.9 7.0 8.2 8.4 8.6 8.7 Chrome finish Order brackets separately (see below) Weight capacity on all s is 150 lbs., uniform load 1.5 1.9 2.1 2.3 2.5 2.7 2.9
[ > contour end base 202 ] Example catalog CEB 18 46 TG G 15 13 base component color (025 or 013) deck color (see color chart) (L)leveled or (G)not leveled (TG)trimguard or (TL)trimline nominal length nominal depth contour end base contour end bases fits 12/12 14/14 14/14 14/14 16/16 16/16 16/16 18/18 18/18 20/20 20/20 22/22 22/22 depth 14 14 16 18 14 16 18 18 24 18 24 18 24 width 26 34 34 34 38 38 42 42 46 46 CEB1426 CEB14 CEB16 CEB18 CEB1434 CEB1634 CEB1834 CEB1838 CEB2438 CEB1842 CEB2442 CEB1846 CEB2446 17.8 19.9 20.9 21.9 21.9 22.9 24.0 26.2.8 29.5 34.5 31.7 37.0 Used at the end of a run Shipped assembled Designate paint color for deck and paint color for base parts. See color chart for paint colors available Add $9.80 per contour end base if leveled Add $.85 per contour end base for the trimguard option 102.45 106.55 113.85 117.50 111.75 116.70 121.00 127.70 141.65 139. 150.90 143.70 158.25
3 02 feature end frames [ < ] 31 Example catalog FE PP SO 15 15 15 interior back panel color (see color chart) exterior back panel color (see color chart) feature end frame color (see color chart) interior back panel (PPPerf, SOSolid, SWSlatwall) exterior back panel (PPPerf, SOSolid, SWSlatwall) nominal height nominal width feature end frame feature end frame feature end frame hardware width height 56 66 71 56 66 71 56 66 71 Used at the end of a run with or without a contour end base Shipped assembled with one or two back panels. Feature end frame hardware pack (sold separately) is required to attach frame to a standard gondola (see below). t brace 90 t brace FE FE56 FE FE66 FE71 FE FE FE56 FE FE66 FE71 FE FE FE56 FE FE66 FE71 FE 0110332 0110335 17.9 19.1 20.2 21.4 24.3 26.1 19.4 20.5 21.7 22.9 23.9 27.6 22.3 23.5 24.7 25.8 26.8.5 1.0 1.4 Used to secure feature end frame to end of run 90 t brace is used with feature end frame that is 5 shorter than the height of the run Specify paint color 82.40.80 89.85 95.10 93.70 109.70.45 90.85 93.90 99.15 101.35 113.75 93.80 98.20 101.25 106.50 108.70 121.10 9.75 13.20
32 [ > feature end frame components 2 ] sign stem fitting 0820002.50 Required on feature end top rails feature end frame top channel 084038391 084038392 084038393 2.7 3.6 4.3 8.80 10.20 13.20 Used at the top of the feature end frame to secure side channels and back panels Specify paint color (see color chart) feature end frame side rail feature end frame bottom angle feature end frame hardware description 56 66 71 #1024 x 1/2 PFH MS. 1/4 20 x 1/2 TH screw 088002355 088002356 088002357 088002358 088002359 0880024 Rails d individually Specify paint color (see color chart) 084050891 084050892 084050893 Used at the bottom of the feature end frame to secure the side rails and back panels as well as mount the feature end frame to the gondola run Specify paint color (see color chart) 000601060 0006016 Used to secure feature end frame components together and secure feature end frames to gondolas Must be ordered in quantities of 100 5.3 5.9 6.4 6.8 7.1 7.5 20.05 22.25 23.75 26.40 27.50 33.70 15.05 17.65 22.00.10.10
3 02 feature end frame back panels feature end frame back panels [ < ] 33 solid back panels width depth 56 66 71 56 66 71 56 66 71 08583 0858356 08583 0858366 0858371 08583 08583 0858356 08583 0858366 0858371 08583 08583 0858356 08583 0858366 0858371 08583 8.5 8.5 10.5 11.5 12.5 15.5 10.2 11.4 12.7 13.9 15.1 18.7 13.7 15.4 17.0 18.6 20.3 25.1 ¼" hardboard, Painted 2 faces baked enamel Specify paint color 28.70.55 42.95.50.10 63.80 33.60 34.65 44.95 53.35 54.40 66.15 40.45 43.90.95 55.00 59.40 67.50 perf back panels width depth 56 66 71 56 66 71 56 66 71 08582 0858256 08582 0858266 0858271 08582 08582 0858256 08582 0858266 0858271 08582 08582 0858256 08582 0858266 0858271 08582 8.1 8.1 10.0 10.9 11.9 14.7 9.7 10.9 12.0 13.2 14.3 17.8 13.0 14.7 16.2 17.7 19.2 23.9 ¼" hardboard ¼" perforations spaced 1 o.c. Painted 2 faces baked enamel Specify paint color.40 32.50 45.15 50.75 56.40 65.65 34.40.65 47.15 54. 57.90 69.75 42.65 45.90.10 57.25 60.65 75.60 slatwall back panels width depth 56 66 71 56 66 71 56 66 71 3/4" MDF Painted 2 faces baked enamel T slots are spaced 3 o.c. Also available with steel T slot inserts Specify paint color Prices available upon request
34 [ > 4 way 2 ] metal top panel end frame width base 46 54 084453509 0844530 7.3 8.0 45.85 57.75 hardware 1016 x 3/4 tek 000601370 8 tek screws required per top panel 4 way feature end frames height width 4F 4F 12.8 15.1 58.20 65.45 4F 4F 13.8 16.1 Example catalog 4F PP SO 15 15 15 69.75 77.00 interior back panel color (see color chart) exterior back panel color (see color chart) feature end frame color (see color chart) wood base end frame width shelves end frame width base 46 54 01340 01342 5.2 7.7 Above reflects maximum suggested shelf s interior back panel (PPPerf, SOSolid, SWSlatwall) exterior back panel (PPPerf, SOSolid, SWSlatwall) nominal height nominal width 4 way feature end frame base 46 54 087113316 087113317 85.8 85.8 5.05 5.05 Available in (0KM) K6dove gray, (0LA) K9frosty white, (015) H8 antique white, (025) K7black, and (PP) KRalmond All bases are on casters 4 way hardware description anchor clip fwd 10 x 5/8 PHA screw 08446 000601123.3.1 16.50 22.00 3.10.10 solid backs width height perf backs Free standing merchandising unit Not shipped assembled For a complete unit order: 1 4 way base 4 4 way feature end frames 1 Metal top panel 8 4 way back panels 8 Tek screws 8 4 way anchor clips 8 10 x 5/8 PHA screw 4 way back panels 0858020 0858022 0858025 0858027 085820001 085820003 085820006 085820008 8.5 10.5 10.3 12.7 8.1 10.0 9.8 10.1 Also available in slatwall with pricing available upon request 28.70 42.95 33.60 44.95.40 45.15 34.40 47.15
3 02 security case components [ < ] 35 glass door assembly height 50 71 width 087213123 087213125 087213131 Sliding doors in aluminum frame Size stated above is nominal frame Specify aluminum trim color: 95 (natural) 770.20 9.70 1024.35 metal end panels height width 50 71 18 18 18 087213359 0872138 0872133 40.65 69.80 79.40 For a complete unit order: 1 glass door assembly 1 left metal end panel 1 right metal end panel 2 standard shelves (if placed on deck only 1 shelf is required) 1 hdwe pk sec 1 hdwe pk sec ep 2 straps 1 gap filler More than one glass door assembly can be used with a single set of end panels 50 71 50 71 20 20 20 22 22 22 08721 087213387 0872131 0872132 087213370 087213388 security case hardware description hdwe pk sec hdwe pk sec ep gap filler strap 0110432 0110433 0033437 0844317 55.10 99.00 99.00 Side panels for use on existing gondola or wallcase Baked enamel paint finish, specify color Specify left hand or right hand (i.e. 087213388L or R) Do not order a metal end panel wider than the depth of the base deck on unit 63.15 97.85 103.60 2.05 5.15 6.85 6.45
[ > accessories 2 ] cover plate 0820593 Vinyl cover plate plugs hole in top cap Receives stem of sign holder 0.1 0.50 base bulkhead depth 20 087042131 3.3 18.90 Used to increase load capacity of deck by 500 lbs. Placed midway between base brackets Includes levelers glides leveler top cap bracket description standard glide bottom arm glide description leveler j nut retainer Used to level gondola unit 0110541 0110540 Glides are used to protect flooring Price reflects quantities of 100 0880164 0880237 0841588 Drops into place at the top of the standard as an anchor for the top cap Required on end gondolas receiving a feature end frame Used to reinforce gondolas using casters 57.75 57.75 0.40 1.05 0.80
3 02 heavy duty wallmount standard 96 accessories 016000013 016000014 [ < ] 8.4 9.3 Uchannel standards attach to wall Identical slotting as regular standards Specify paint color 37 29.85 33.05 slimline wallmount standard 41 016000221 016000227 2.0 4.5 15. 24.15 7/8" depth 1¼" slotting Specify paint color super structure post super structure u bar super structure locking key For a complete super structure order: 1 post 1 u bar 1 locking key 45 60 087122429 0871224 5.5 6.9 Exposed above top cap Slotting 1¼" on center Super structure standard should be ordered 10" shorter than the gondola height Specify paint color 56 66 71 084037928 084037929 0840379 084037931 Supports super structure standard internally between top cap and cross tie 0840091 2.0 2.0 2.2 2.4 42.50 42.50 8.50 9.00 9.55 10.05 0.1.60 Secures super structure standard at desired height
38 [ > caster components 2 ] caster channel contour end base channels 084452268 34 084452269 38 0844693 42 084452270 46 084452271 gondola channels 0844693 0844692 2.8 3.3 3.7 4.2 4.7 3.7 5.1 14.00 16. 10.60 18.55 19.45 11.15 15.40 3 caster channels are required per full gondola 2 caster channels are required per half gondola 1 caster channel is required per contour end base caster brace 084452559L 084452559R 1 left and 1 right caster brace is required per caster channel 2 2 4.75 4.75 caster caster hardware For a complete caster assembly order: 1 caster channel 1 left and right caster brace 2 casters Minimum required hardware (see right) Visit www.streater.com and review the caster assembly instructions for required hardware on gondola fixtures. contour end base hardware (per caster channel) 000601157 000601275 000601171 0880297 000601240 description 5/18 hexnut split lock washer capscrew 5/18 U nut retainer 5/16 5/16 washer qty. gondola hardware (per caster channel) 000601157 000601275 000601171 0880297 000601240 0844720 T880280 description 5/18 hexnut split lock washer capscrew 5/18 U nut retainer 5/16 5/16 washer spacer plate 4 4 2 2 2 qty. 1.0 9.20 Two casters per channel are required for gondola starter units and contour end bases Only one caster per channel is required for gondola add on units.10.10.20 1.00.10.10.10.20 1.15.10 4.00
3 02 top cap anchor bracket accessories [ < ] 39 084032001 0.2 1.35 Painted top cap anchor grips wallcase top cap & is fastened to the wall Zinc finish Fasteners not included standard wall tie bracket 08489 0.2 1.00 Grips the verticle edge of standard and is fastened to the wall 12 ga. steel, zinc finish Fasteners not included end bottom arm tie down center bottom arm tie down upright & bottom arm tie down Ties the end bottom arm to the floor from inside base area, not seen when unit is assembled 12 ga. steel, zinc finish Fasteners not included 0840143 Straps center bottom arm to the floor 12 ga. steel, zinc finish Fasteners not included 0840442 084154724 0.1 1.70 0.1.85 0.2 8.40 Anchor secures upright or bottom arm leveler leg to the floor, using customer supplied anchor bolts. Must be used when shelving unit exceeds a height to depth ratio of 6:1 Available in color 025 (black) only Fasteners not included Must be ordered in quantities of 10
40 [ > cornice 2 ] telescoping cornice bracket L/R bracket (087060032) Tip (087060033) hardware 087060032R 087060032L 087060033 000601123 2.0 2.0 1.1 Hooks into upright Telescopes 20 to 34 See color chart for available colors For each L/R bracket order 1 Tip (087060033) and 1 screw (000601123).1.95.95 24..10 metal cornice front 6.7 10.0 20.0 8 high with 3 bottom flange Flanges at each end for connecting segments See color chart for available colors Prices available upon request metal cornice return metal cornice shelf mount bracket 16 25 25 35 Matches metal cornice front See color chart for available colors Prices available upon request 0880019 8.9 10.2 Used to attach metal cornice to a shelf top 2 brackets are required per starter unit 1 bracket is required per add on unit Prices available upon request 2.3
3 02 cross bar accessories [ < ] depth width 41 1 3 6 8 016060479 0160603 01606 016060491 59.95 65.25 69.55 73.95 Specify paint color hangrod assembly flange bracket touch up paint description 12 14 hangrod hardware 10 14 18 22 015 decor white 0PP platinum plus 0KM dove gray 013 dark bronze 025 black 0LA frosty white 0MT liberty red 1 position Specify right or left Available in colors listed only Available in aerosal only 0160205R/L 0160206R/L 08109 0810310 0006015 0810152 084010188R/L 084010189R/L 084010190R/L 084010191R/L 000143183 000143193 000143189 000143185 0001431 000143196 000143190 Brackets in 12 and 14 depths Chrome plated rod For each R/L bracket order 2 screws (0006015) For each hangrod order two end caps (0810152) 1.2 1.7 2.2 2.6 12 oz 12 oz 12 oz 12 oz 12 oz 12 oz 12 oz 13.95 13.95 21.70 21.70 0.20 1.05 10.95 14.85 16.25 18.55 42.45 42.45 42.45 42.45 42.45 42.45 42.45
42 [ > WireFlex 2 ] WireFlex wall width starter 32 96 add on 32 96 height 84 84 84 84 84 84 011050001 011050002 011050003 011050009 011050010 011050011 Starters include wire grid, 2 end caps and top and bottom mounting channels Add ons include wire grid, vertical channel grid support, and top and bottom mounting channels 96 units includes vertical channel grid support Color 0LA (white) baked enamel only 299.70 372.25 731.10 281.70 354.25 713.10 WireFlex island width island height 32 64 80 84 84 84 84 011050004 011050005 011050016 011050006 solid end cap back panel 18 84 011050008 wire end cap back panel 18 levelers 84 0110500 0102250 Islands include wire grid, 2 end panels and 2 top and bottom mounting channels. 64" & 80" kits include vertical channel grid support Solid painted panel or WireFlex panel available to insert into metal end panels; order separately Color (0LA) white baked enamel finish Optional base decks available for side(s) and/or end(s); not necessary for support of island 766.70 900.00 1316. 1437.60 47.45 223.60 10.20
3 02 WireFlex base deck WireFlex components [ < ] 43 16 32 084452063 084452064 084452065 20.70 33.95.65 7 deep Color LA (white) WireFlex shelf 16 084452092 7 deep Color LA (white) Must be ordered in quantities of 12 12.50 WireFlex speedwall wallmount standard Fits Ultra uprights Wires spaced 1 apart 12 tall Color LA (white) height 087094398 087094390 15 016000216 1¼ on center slotting Color LA (white) 165.15 179.50 11.25
44 [ akro bin > WireFlex accessories 2 ] blue 11x8x7 0821943 22.70 11x11x15 0821970 22.70 white 11x8x7 0821945 23.80 Attaches to speedwall and WireFlex reinforced crossbar 087094421 087094422 Fits on wallmounts and regular standards Color LA (white) 152.80 176.25 vial cap bin 6 x10 084452111 Attaches to reinforced crossbar Color LA (white) 24.70 monitor tray telephone tray tray divider 16 x18 Attaches to reinforced crossbar Color LA (white) Prices available upon request 12 x12 Attaches to reinforced crossbar Color LA (white) Prices available upon request channel track 08217 divider 08218 Divides tray into smaller sections Clear acrylic Prices available upon request
4 02 bottle bay components [ < ] 45 2 6 4 4 1 5 1. Double bottle bay end panels two per module 2. Double bottle bay top one per module 3. Double bottle bay bottom one per module 4. Back panel one per module 3 8 7 5. Single bottle bay panels two per module (finished and unfinished) 6. Single bottle bay top one per module 7. Single bottle bay bottom one per module 8. Single bottle bay base cover one per module 9. Single bottle bay back brace one per module 10. Hardware pack one per module 9
46 [ > bottle bay components 402 ] double bottle bay end panels 85 0841506 Height: 85 1 / 4 " Depth: 15" All steel construction, LA (frosty white) Steel end unfinished Melamine overlay end panels available 15.4 317.00 double bottle bay bottom 24 29 44 084150665 084150664 084150663 084150662 11.3 11.3 11.3 15.0 Unit widths: 24", 285/16", ", 4311/16" Depth: 15" All steel construction, 025 (black) 98.00 114.50 102.00 110.00 double bottle bay top bottle bay backs 24 29 44 084150669 084150668 084150667 084150666 6.0 7.5 9.0 12.0 Unit widths: 24", 285/16", ", 4311/16" Depth: 15" All steel construction, 0LA (frosty white) 15 24 29 44 412231582 0850006 08500 0850005 0850008 9.3 14.2 16.2 20.6 25.0 71.50 74.50 96.00 117.00 20.00 39.70 40.70 54.25 59.80 Available in s for single and double bottle bays, as well as 2 single bottle bays backtoback Height: 85¼" Color: LA (Frosty White)
4 02 single bottle bay end panels bottle bay components [ < ] 47 85 241560000R/L 8.5 199.00 Height: 85 1 / 4 " Depth: 7¾ All steel construction, LA (frosty white) Steel end unfinished Melamine overlay end panels available single bottle bay top 15 24 29 44 241520015 241520024 241520029 2415200 241520044 1.9 3.0 3.7 4.9 7.4 28.00 43.50 42.00 46.50 66.00 Depth: 7¾ All steel construction, LA (frosty white) single bottle bay bottom single bottle back brace 15 24 29 44 Depth: 7¾ All steel construction, LA (frosty white) 15 24 29 44 2410015 2410024 2410029 24100 2410044 2415015 2415024 2415029 24150 2415044 Depth: 7¾ All steel construction, 25 (black) 2.9 3.8 5.0 5.7 7.5 2.3 1.5 1.9 2.3 3.0 28.00 38.50 47.50.00 60.00 28.50 34.50.00 44.50.00
[ > bottle bay components 402 ] bottle bay overlay end panels style single double hardware screws 434170885 434171585 000601108 14.4 21.0 Height: 85 1 / 4 " K9 (frosty white melamine) Melamine construction Order eight (8) screws per end panel.1 108.60 134.70.10 single bottle bay base cover style single 242290000 All steel construction, 25 (black).6 10.50 bottle bay shelves bottle bay hardware pack 15 0120001 1.1 5.55 24 0120002 1.8 8.20 29 0120003 2.1 8.95 0120004 2.7 10.80 44 0120005 3.2 13.80 All steel construction, LA (frosty white) 0102287.3 15.55 Order 1 hardware pack per module
4 02 basic open unit under counter cabinets [ < ] 49 087260001 57.8 4.05 Customize with any accessory dual shelf cabinet 087260005 71.2 8.80 Includes 2 adjustable shelves waste cabinent 0872609R/L Specify R/L hand door 71.2 528.85
50 [ > under counter cabinets 402 ] locked drawer cabinet 0872600 100.3 700.15 Includes adjustable shelf drawer & half door cabinet 087260009R/L Specify R/L hand door Includes adjustable shelf All handles are included 815.25 4 drawer accessory cabinet 087260004 81.4 1374.15
4 02 5 drawer accessory cabinet under counter cabinets 087260012 Top drawer includes lock [ < ] 1427.80 sink cabinet 087260023R/L Specify R/L hand door Does not include sink 111.8 567.15 printer cabinet 087260022 1.6 885.60 Printer drawer is longer to allow greater extension of the drawer Printer shelf is 22½ wide and 28 deep
52 [ > under counter cabinets 402 ] 3 drawer vial/bottle cabinet 087260024 169.2 1439.85 Each drawer has 4 adjustable dividers half modular cabinet 087260011 12 wide CPU pull out drawer available 241.2 412.80 printer pullout cabinet 087260021 203.7 885.60 Full extension slides allow easy access to back of printer
4 02 3 drawer locked narcotics cabinet under counter cabinets 087260015R/L Completely closed back [ < ] 53 1.4 1264.10 over sink cabinet 087260016 tall; 28 wide; 11 deep 2 adjustable shelves 147.4 597.05 5 drawer RX cabinet 087260013 132.8 2282.60 4 bottom drawers divided into 3 sections with card follower system Top drawer includes lock
54 [ > under counter accessories 402 ] counter top 8 10 0871174 0871175.5 64.4 wide, 13/16 thick 2 2½ diameter holes spaced 12 from each end Gromet covers included High pressure laminate J3 (frosty white) Sides machined for easy assembly 439.00 4.70 backsplash 8 10 087260027 087260028 7.0 8.6 4 high, 13/16 thick High pressure laminate J3 (frosty white) Top edge laminated 113.55 128.55 high rise end panel adjustable shelf 0850331 deep, 42 tall High pressure laminate J3 (frosty white) Used to finish off a run of cabinets that do not terminate at a wall 085220400 21.4 229.70 8.3 68.40
4 02 backroom system back room components & information [ < ] 55 The slimline upright and shelf support of Streater's backroom storage shelving system offers easy assembly, strength and durability at an economical. Factory assembled uprights, 7/8" wide, are slotted on the sides to receive the shelf supports. Interchangeable front and rear shelf supports protect the edge of the shelf and are adjustable on 1¼" increments. The particle board shelf may be removed or replaced without removing the shelf supports. Local codes concerning fire regulations, sanitation regulation and /or seismic certifications may apply to some installations. Check with your local building authorities to determine what codes, if any, may apply. PRICES AVAILABLE UPON REQUEST outrigger system This system is designed for hand loading only. PLEASE NOTE: Personnel must be provided with safe access to all elevations of storage equipment or display fixtures via ladders, stairways or other means, in accordance with applicable OSHA regulations. In no case should anyone be allowed to climb or stand on storage or display equipment. PRICES AVAILABLE UPON REQUEST
56 [ widespan > outrigger & widespan 402 ] This system is designed for hand loading only. PLEASE NOTE: Personnel must be provided with safe access to all elevations of storage equipment or display fixtures via ladders, stairways or other means, in accordance with applicable OSHA regulations. In no case should anyone be allowed to climb or stand on storage or display equipment. PRICES AVAILABLE UPON REQUEST