Contrôle substances indésirables Ambiance Intérieure Insulating breather membrane EUROCLASS A2-s1,d0 EN 13859-1 EN 13859-2 - A u-d e l à de l a r é gl e m e nt a ti o n - BREATHABLE NO RISK OF CONDENSATION NON-COMBUSTIBLE EUROCLASS A2-s1,d0 EUROCLASS A2-s1,d0
NO RISK OF CONDENSATION 2 in 1 insulating breather membrane Reflective insulation with high reflectivity Very low radiation to the outside (emissivity = 5 %) WINTER SUMMER Very high reflectivity 95 % In winter : reflects up to 95 % of radiant heat back toward the living space, keeping your home warmer and dramatically reduces your heating costs. Very high reflectivity 95 % Heater Emissivity 5 % Air conditioning In summer : reflects solar radiation back outside to prevent overheating of the attic and the living space. Significantly reduces your air conditioning use and consumption. Airtight insulation (roofing membrane) Waterproof rain barrier Drives eventual water leaks to the gutter Air and vapour exhaust Water vapour coming from inside attic can escape in the ventilation space Airtight wind shield Ventilated roof air gap Hot or cold air leaks Water vapour Weather barrier (application under external wall cladding) Heated or cooled living space Water vapour due to human activities Air entrance highwater vapour permeability It is possible to estimate the average production of water vapour by a4-individual family to approximately 12 liters per day. In order to prevent pathological risk and damages that could occur to building structure, it is essential to use a breathable product with high water vapour permeability that will lead the water vapour to exhaust the building.
pure aluminum foil reinforced with glass fibers waterproof membrane high density blanket made with E glass filaments breather pure aluminum foil ISO 9001 14001 Breathable Manufactured under certification Tearproof (EN 12310-1) Summer thermal insulation Winter thermal insulation Waterproof Airtight HIGH DENSITY BLANKET MANUFACTURING 1 200 mm fiberglass filaments Fibers needling 2 3 High density blanket (1 mm) HEALTH AND ENVIRONMENT : guaranteed Asbestos free,formaldehyde free and V.O.C. free (Volatile Organic Compound). Filaments composing are classified as non carcinogenic by European Directive n 97/69/CE and by I.A.R.C (International Agency for Research on Cancer). More than 90 % of raw materials used in the manufacturing process of are already recycled materials. is also 100 % recyclable. is manufactured under ISO 14001 Certification (Environmental management) ensuring a complete respect of environmental friendly procedures during the manufacturing process.
An outstanding level of performance Winter and summer thermal comfort (energy savings) REFLECTIVE INSULATION (Reflectivity rating : 95% - Lambda : 0,029 W/m K) High water vapour permeability (breathable : avoids condensation problems, can be applied on continuous supports such as existing insulation, sheating...) Waterproof and Airtight (100% waterproof) Tearproof according to EN 13859-1standard Euroclass A2-s1,d0 (Safety of people and goods) equivalent to M0 ratings) BREATHABLE W1 MD : 275 N - CD : 280 N NON-COMBUSTIBLE Building Airtightness and building structure protection BUILDING AIRTIGHTNESS : With the generalization of «Low energy consumption» buildings, an airtight building envelope is now considered has a paramount to obtain indoor comfort and significant reduction of energy consumption. Installed as a roof underlayment, creates a complete insulating envelope of the roof avoiding thermal briges and heat exchanges due to roof air leaks. This airtight envelope allows the roof structure to breathe. makes it possible to complete, with only one installation, the insulation and the weather barrier (airtight and waterproof ) of the roof while allowing the roof structure to breathe with a high vapour permeability. With its high resilience characteristics and high density (135 Kg / m 3 ), alone has a sound reduction capacity of Rw = 16 db. BUILDING STRUCTURE PROTECTION Avoids condensation and mold problems thanks to high vapour permeability. Protects the building against external weather assaults like rain, snow, dirt, insects... especially when traditional roofing materials are damaged. Unlike traditional roof underlayments, high density avoids noises due to wind clapping. Higher fire protection. Limits flame spread and smoke development. Delays structural collapse. : marked (According to : EN 13859-1 - EN 13859-2)
NO RISK OF CONDENSATION highwater vapour permeability Easy to install CAN BE APPLIED ON CONTINOUS SUPPORTS SUCH AS EXISTING INSULATION, SHEATING... PROTECTS EXISTING INSULATION CAN BE NAILED, STAPPLED OR SCREWED insulation REINFORCED INSULATIONN
Contrôle substances indésirables Ambiance Intérieure Technical sheet Composition Thickness Roll size Density Packaging Roll weight Roll diameter Physical datas Emissivity / Reflectivity Breathable and waterproof membrane reinforced with fiberglass fabric / pure aluminum foil High density blanket made with continuous E glass filaments Micro-perforated pure aluminum foil (breathable) 10 mm (+0/-2mm) 1m x 18 ml (18 m²) 1 346 g/m² 6 rolls / box - 2 boxes / pallet 24 kg 420 mm 5% / 95 % Thermal conductivity Mechanical datas Fire rating 0,029 W/mK Accessories Adhesive aluminum tape REFLEXBOND 100 mm SUMMER THERMAL TEST 80 70 y : Euroclass A2-s1,d0 (Non combustible) - M0 Water vapour permeability Sd 0,041 m (breathable) - water vapour resistance factor (μ) : 7 Waterproof W1 (waterproof under 1000 mm water column) Tear resistance (nail tear resistance) MD : 275 N - CD : 280 N Sound reduction Rw = 16dB ( alone) 60 60 HEATED CAVITY 49,6 50 heated cavity Plaster boards Air gaps 40 Mineral wool 34,1 30 20 14,3 14,6 12,2 11,3 11,3 11,3 11,4 11,7 12,4 12,9 13,6 10 11,3 11,3 11,3 11,5 11,5 11,9 12,1 12,6 12,8 13,2 Mineral wool 0 260 mm 1 2 3 4 5 6 7 8 9 10 Time - hours Temperature - C Comparative test / 260 mm Mineral wool 73,5 75,4 72,3 74,6 69,6 66,8 GENERAL DOCUMENTATION - 00303C 01/2016 - A u-d e l à de l a r é gl e m e nt a ti o n - ZONEVERTEEXCELL.COM ZI des Châtelets - 8 rue du Boisillon - 22950 Trégueux - France Tél. : +33 (0)2 96 78 79 80 - Fax : +33 (0)2 96 78 65 67 - contact@winco-tech.com - www.winco-tech.com