TopGard Type A Aluminum Emulsion

Similar documents
JM One-Step Foamable Adhesive, Part 2

MBR Bonding Adhesive Base

JM EPDM/PVC Pourable Sealer - Part A

Weather Protective Coating

JM Roofing System Urethane Adhesive, Part 2.

Asphalt Emulsion Roof Coating

JM One-Part Pourable Sealer

MBR Flashing Cement Base

MBR Cold Application Adhesive

Insulation Fabrication Adhesive

CR Seam Coating. Version 1.0 Revision Date 05/29/2015 Print Date 05/29/2015

MBR Utility Cement (Summer and Winter Grade)

Bonded Perlite Thermal Insulation

Fiberglass-Reinforced, Asphalt-Coated Ply Sheets IV

One Coat Finishing Cement

Thermo-12(R) Gold Calcium Silicate Insulation

JM TPO Water Based Membrane Adhesive

Fiber Glass Wool Automotive Insulation, Uncured

Bestile Utility Cement

InsulThin HT. Version 1.3 Revision Date 02/05/2016 Print Date 02/05/2016

253 Glass Marbles. Version 1.0 Revision Date 04/21/2017 Print Date 04/21/2017

JM Single Ply Sealing Mastic

JM PVC Edge Sealant. Version 1.4 Revision Date 05/19/2016 Print Date 05/19/2016

Coated glass faced polyiso board

JM EPDM Water Based Membrane Adhesive

Version 1.6 Revision Date Print Date

JM Open-cell (oc) and Open-cell Appendix x (ocx) Spray Polyurethane Foam (SPF) Component B (USA)

CAPTURE, Professional Steam Clean

SAFETY DATA SHEET Class C Solutions: Heavy Duty Glass Clnr 4/1gal #C21926

Safety Data Sheet OARS Liquid

Thermo-12(R) Gold Calcium Silicate Insulation

SAFETY DATA SHEET BOARDWALK HIGH TRAFFIC FLOOR POLISH 4/1G Version 1.2 Revision Date 03/13/2017 Print Date 03/21/2017

SAFETY DATA SHEET GENUINE JOE ALL PURPOSE CLEANER GJO /1G

SAFETY DATA SHEET GENUINE JOE PINE OIL CLEANER GJO /1G

SAFETY DATA SHEET GENUINE JOE NEUTRAL CLEANER GJO /1G

Material Safety Data Sheet AQUA-CAL liquid

Safety Data Sheet Aqua-Root Pellet

Ultra-Plex Red Grease Cartridge

SAFETY DATA SHEET BOARDWALK NEUTRAL FLOOR CLNR CONC 4-1GL Version 1.0 Revision Date 10/22/2015 Print Date 03/21/2017

PURELL Education Hand Sanitizer SF607 Foam

AMP Activator Version 1.2 SDS Number: Revision Date:

Fiberglass Blowing Wool

Formaldehyde-free Fiberglass Duct HVAC Insulation

JM Open-cell Spray Polyurethane Foam (oc SPF) Component B (USA)

Group A Strep Primer Pair

Material Safety Data Sheet VERDE-LAWN

Safety Data Sheet PBS 150 Granular

Material Safety Data Sheet SALT-AID liquid

Version 1.3 Revision Date Print Date

Bestile Utility Cement

Residential Mineral Wool Batt Insulation

KIT CAP-G/CTM WASH RGT 5.1L IVD

ZEP MARB, GRANITE CLNR ZU Version 2.1 Revision Date 12/06/2016 Print Date 05/04/2018

HVAC Insulation. Version 1.3 Revision Date 09/01/2017 Print Date 09/01/2017

Single Ply LVOC Caulk

High Purity Silica Felt/Fiber

Version 1.3 Revision Date Print Date

APPLIED BIOCHEMISTS NO FOAM Version 1.0 SDS Number: Revision Date:

PreciControl HbA1c norm

KEYACID RHODAMINE WT LIQUID

SAFETY DATA SHEET Product: MARC 189 SUPER IMPACT GREASE

Fiber Glass Insulation

Safety Data Sheet Aqua-Carbon Liquid

ZEP LQ SEPTIC TANK CLEANR Version 2.2 Revision Date 12/01/2016 Print Date 07/12/2018

PreciControl Anti-HBc IgM

DMEM high glucose w/o Na Pyruvate Version 2.0 SDS Number: Revision Date:

SAFETY DATA SHEET SSS JOURNEY GLASS & SURFACE CLEANER (#05050)

BZ7375 HD SWEEPING COMPOUND R LB

BZ7375 ZP HD SWEEP COMP R LB DR

Material Safety Data Sheet CAPTURE SPOT STAIN REMOVER 32OZ 6 PER CASE

CLN STONE PLUS DEGRSR OBS Version 2.1 Revision Date 12/14/2016 Print Date 11/25/2017

CAPTURE PREMIST 24OZ 6 PER CASE

B01804 Mst Neut Floor Cleaner EP 1gll

Version 4 Revision Date 01/18/2018 Print Date 01/26/2018

SAFETY DATA SHEET HILLYARD QUICK & CLEAN GLASS & SURFACE CLEANER HIL

BZ7593 ZEP HDWR LAM CLN ZUHLF128 4/1 GAL Version 3.0 Revision Date 09/27/2016 Print Date 11/02/2016

BZ7351 NON ACID BWL CLNR R QT/CS Version 1.2 Revision Date 11/30/2016 Print Date 01/12/2018

DRI OXYCODONE CALIBRATOR 100

SAFETY DATA SHEET HILLYARD QUICK & CLEAN GUM-GO

PURELL Professional HEALTHY SOAP Fresh Scent Foam

BL0838 MST PRO-TEC 4/1GLL Version 1.0 Revision Date 06/22/2015 Print Date 10/07/2015

BZ7920 ZC ALL PURPOSE CLNR ZUALL32 12/QT Version 3.0 Revision Date 04/20/2016 Print Date 05/09/2017

BZ7920 ZEP ALL PURP CLNR ZUALL32 12/QT Version 3.0 Revision Date 04/20/2016 Print Date 11/14/2016

MBR Cold Application Adhesive

Version 1.3 Revision Date Print Date

BL0915 MST FROSTY PEARL RTU 4/1GLL Version 1.0 Revision Date 06/16/2015 Print Date 10/14/2015

BZ7351 NON ACID BWL CLNR R QT/CS Version 1.1 Revision Date 05/27/2015 Print Date 06/01/2015

MSDS Number: : F

Transcription:

SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Trade name : TopGard Type A Aluminum Emulsion Manufacturer or supplier's details Company : Johns Manville Address : P.O. Box 5108 Denver, CO USA 80127 Telephone : 303-978-2000 8:00AM-5:00PM M-F Emergency telephone number : 1-800-424-9300 (Chemtrec, in English) Prepared by : productsafety@jm.com SECTION 2. HAZARDS IDENTIFICATION GHS Classification Skin corrosion/irritation : Category 2 Serious eye damage/eye irritation Specific target organ toxicity - single exposure : Category 2 : Category 3 GHS Label element Hazard pictograms : Signal word Hazard statements Precautionary statements : Warning : H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. : Prevention: P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P264 Wash skin thoroughly after handling. Response: P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P304 + P312 IF INHALED: Call a POISON CENTER or doctor/ physician if you feel unwell. P337 + P313 If eye irritation persists: Get medical advice/ attention. 1 / 9 US/EN

P332 + P313 If skin irritation occurs: Get medical advice/ attention. P362 Take off contaminated clothing and wash before reuse. Storage: P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up. Disposal: P501 Dispose of contents/ container to an approved waste disposal plant. Other hazards None known. SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous components asphalt 8052-42-4 >= 20 - < 30 aluminium 7429-90-5 >= 5 - < 10 Talc (Mg3H2(SiO3)4) (< 10% free silicium dioxide) 14807-96-6 >= 5 - < 10 SECTION 4. FIRST AID MEASURES General advice If inhaled In case of skin contact In case of eye contact If swallowed : Move out of dangerous area. Consult a physician. Show this safety data sheet to the doctor in attendance. Do not leave the victim unattended. : If unconscious place in recovery position and seek medical advice. If symptoms persist, call a physician. : Immediate medical treatment is necessary as untreated wounds from corrosion of the skin heal slowly and with difficulty. If on skin, rinse well with water. If on clothes, remove clothes. : Small amounts splashed into eyes can cause irreversible tissue damage and blindness. Remove contact lenses. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. Continue rinsing eyes during transport to hospital. Protect unharmed eye. Keep eye wide open while rinsing. If eye irritation persists, consult a specialist. : Keep respiratory tract clear. Do NOT induce vomiting. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician. 2 / 9 US/EN

Take victim immediately to hospital. SECTION 5. FIREFIGHTING MEASURES Unsuitable extinguishing media Specific hazards during firefighting Hazardous combustion products Specific extinguishing methods Further information Special protective equipment for firefighters : High volume water jet : Do not allow run-off from fire fighting to enter drains or water courses. : No hazardous combustion products are known : Standard procedure for chemical fires. : Standard procedure for chemical fires. Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. : Wear self-contained breathing apparatus for firefighting if necessary. SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Environmental precautions Methods and materials for containment and cleaning up : Use personal protective equipment. : Prevent product from entering drains. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities. : Neutralise with acid. Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal. SECTION 7. HANDLING AND STORAGE Advice on safe handling : Do not breathe vapours/dust. Avoid exposure - obtain special instructions before use. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. To avoid spills during handling keep bottle on a metal tray. Dispose of rinse water in accordance with local and national regulations. 3 / 9 US/EN

Persons susceptible to skin sensitisation problems or asthma, allergies, chronic or recurrent respiratory disease should not be employed in any process in which this mixture is being used. Conditions for safe storage : Keep container tightly closed in a dry and well-ventilated place. Observe label precautions. Electrical installations / working materials must comply with the technological safety standards. SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Components with workplace control parameters Components CAS-No. Value type (Form of exposure) asphalt 8052-42-4 (Fume, inhalable fraction) Control parameters / Permissible concentration 0.5 mg/m3 (as benzene soluble aerosol) Basis ACGIH C (Fumes) 5 mg/m3 NIOSH REL aluminium 7429-90-5 5 mg/m3 NIOSH REL (Respirable) (total) 10 mg/m3 NIOSH REL (total 15 mg/m3 dust) (respirable fraction) 5 mg/m3 Talc (Mg3H2(SiO3)4) (< 10% free silicium dioxide) (Total dust) (respirable dust fraction) (welding fumes) (pyro powders) (Respirable fraction) 15 mg/m3 5 mg/m3 5 mg/m3 5 mg/m3 1 mg/m3 14807-96-6 (Dust) 20 Million particles per cubic foot NIOSH REL NIOSH REL ACGIH 2 mg/m3 NIOSH REL (Respirable) 0.1 fibre/cm3 ACGIH (Respirable fraction) 2 mg/m3 ACGIH (respirable 2 mg/m3 4 / 9 US/EN

Personal protective equipment Hand protection Remarks dust fraction) : Take note of the information given by the producer concerning permeability and break through times, and of special workplace conditions (mechanical strain, duration of contact). Eye protection Skin and body protection Hygiene measures : Tightly fitting safety goggles Wear face-shield and protective suit for abnormal processing problems. : impervious clothing Choose body protection according to the amount and concentration of the dangerous substance at the work place. : Handle in accordance with good industrial hygiene and safety practice. When using do not eat or drink. When using do not smoke. Wash hands before breaks and at the end of workday. Written instructions for handling must be available at the work place. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Colour Odour Odour Threshold : liquid : black : Wood ph : 9 Melting point/freezing point : 100 C Flash point : 100 C Method: closed cup Evaporation rate Flammability (solid, gas) Upper explosion limit Lower explosion limit Vapour pressure Relative vapour density : 18 mmhg 5 / 9 US/EN

Relative density Water solubility Solubility in other solvents Partition coefficient: n- octanol/water Auto-ignition temperature Thermal decomposition Viscosity, dynamic Viscosity, kinematic SECTION 10. STABILITY AND REACTIVITY Reactivity Chemical stability Possibility of hazardous reactions Conditions to avoid : No decomposition if stored and applied as directed. : No decomposition if stored and applied as directed. : No decomposition if stored and applied as directed. SECTION 11. TOXICOLOGICAL INFORMATION Skin corrosion/irritation Remarks: Extremely corrosive and destructive to tissue. Serious eye damage/eye irritation Remarks: May cause irreversible eye damage. Respiratory or skin sensitisation Remarks: May cause sensitisation of susceptible persons by skin contact or by inhalation of aerosol or dust. IARC Group 1: Carcinogenic to humans Talc (Mg3H2(SiO3)4) (< 10% free silicium dioxide) 14807-96-6 6 / 9 US/EN

ACGIH Confirmed human carcinogen Talc (Mg3H2(SiO3)4) (< 10% free silicium dioxide) 14807-96-6 NTP No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by. Known to be human carcinogen Talc (Mg3H2(SiO3)4) (< 10% free silicium dioxide) 14807-96-6 Further information Remarks Components: asphalt: Remarks SECTION 12. ECOLOGICAL INFORMATION Ecotoxicity Persistence and degradability Bioaccumulative potential Mobility in soil Other adverse effects Regulation Remarks Additional ecological information 40 CFR Protection of Environment; Part 82 Protection of Stratospheric Ozone - CAA Section 602 Class I Substances This product neither contains, nor was manufactured with a Class I or Class II ODS as defined by the U.S. Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B). Components: asphalt: 7 / 9 US/EN

Additional ecological information SECTION 13. DISPOSAL CONSIDERATIONS Disposal methods Disposal of residual product Contaminated packaging : Do not dispose of waste into sewer. Do not contaminate ponds, waterways or ditches with chemical or used container. Send to a licensed waste management company. : Empty remaining contents. Dispose of as unused product. Do not re-use empty containers. SECTION 14. TRANSPORT INFORMATION International transport regulations These products are not classified as dangerous goods according to international transport regulations. SECTION 15. REGULATORY INFORMATION TSCA list : Not relevant Not relevant EPCRA - Emergency Planning and Community Right-to-Know Act CERCLA Reportable Quantity This material does not contain any components with a CERCLA RQ. SARA 304 Extremely Hazardous Substances Reportable Quantity This material does not contain any components with a section 304 EHS RQ. SARA 302 : No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. SARA 313 : The following components are subject to reporting levels established by SARA Title III, Section 313: aluminium 7429-90-5 7 % Clean Air Act This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air Act Section 12 (40 CFR 61). This product does not contain any chemicals listed under the U.S. Clean Air Act Section 112(r) for Accidental Release Prevention (40 CFR 68.130, Subpart F). This product does not contain any chemicals listed under the U.S. Clean Air Act Section 111 SOCMI Intermediate or Final VOC's (40 CFR 60.489). California Prop 65 This product does not contain any chemicals known to State 8 / 9 US/EN

of California to cause cancer, birth defects, or any other reproductive harm. The components of this product are reported in the following inventories: TSCA : On TSCA Inventory DSL : All components of this product are on the Canadian DSL. SECTION 16. OTHER INFORMATION Further information Revision Date : 06/11/2015 The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. 9 / 9 US/EN