MOORECONCRETE Redi-Rock Walls Precast interlocking blocks for retaining and freestanding walls www.moore-concrete.com
RETAINING WALLS High quality precast solution Redi-Rock is the optimum engineered answer to all your retainer wall requirements. These 1 tonne interlocking blocks are moulded from high strength concrete and delivered ready to build. The product is designed with a natural rock effect, which offers a much more aesthetically pleasing alternative to traditional retainer wall designs. As the Redi-Rock blocks are dry laid, it is a quick and easy job to build a wall imagine creating a structure with giant concrete Lego TM blocks. These blocks are versatile enough to achieve height without compromising strength, with fully engineered plans pre-drawn for different heights and ground conditions. The system provides many advantages over alternative retaining wall systems, not least substantial cost savings and faster build times. QUALITYPRECASTSOLUTIONS
Top 555kg +/- 1010mm 125mm 330mm 250mm Dia 100mm High (Typ.) Bottom 1126kg +/- 580mm 914mm mm 1168mm 700mm 1168mm 1040mm 250mm Dia 100mm High (Typ.) Middle 1066kg +/- 580mm 914mm mm Planter 916kg +/- 410mm 914mm 580mm mm 200mm 1168mm 1040mm 1168mm 1040mm COBBLESTONE Top Middle Bottom MOORECONCRETE
REDI-ROCK RETAINING WALL APPLICATIONS WATER Dry laid 100 per cent concrete with no steel reinforcement, ideal in a wide range of water, shoreline and floodzone applications. HOUSING Save money and utilize more land, whilst the blocks provide an attractive finish. RAIL Less disruption to services through quick and economical installation, in any weather, makes this the perfect solution. HIGHWAYS Large cost savings are possible due to the quick installation and less land take required. LANDSCAPING Planters and sophisticated curves make this the most attractive retaining wall system available. QUALITYPRECASTSOLUTIONS
PLANNING AND INSTALLATION Moore Concrete offer extensive engineering, design and installation support for the Redi-Rock modular wall system which includes: *Drawing Not to Scale Batter Angle 4.0 ± Ground Level Site survey Engineered design charts and calculations construction details bespoke engineering service for unusual and problem situations Manufacturing Installation manual 3.2m Free Draining Backfill Placed 300mm Wide Behind Wall KEY BENEFITS OF REDI-ROCK RETAINING WALLS Bury Depth 150mm Min Ground Level Leveling Pad Depth 300mm Min 1040mm Blocks Fast and easy to install up to 10 times the speed of traditional walls Space saving designs. Geogrid is rarely needed meaning walls take up less space Blocks delivered ready to build The interlocking blocks do not need mortar, so can be laid in any weather Aesthetically pleasing, with the look of natural stone Minimal maintenance required Engineered strength, achieving height without geogrid Security / force protection / flood protection systems available Can be used seamlessly with Redi-Rock freestanding walls design and installation support offered as part of the package Risk reduced, as number of people and time on site reduced If plans change, just pick up and build in a new location the ultimate sustainable solution Non-Woven Geotextile Fabric (if required) Base Elevation Crushed Stone Leveling Pad Perf. Drain Pipe with Sock (or as specified by eng.) MOORECONCRETE
REDI-ROCK FREESTANDING WALLS High quality precast solution The Redi-Rock freestanding blocks are textured on both sides. They are dry-laid and quicker to install than conventional systems. If project plans change, just dismantle and use again. Besides looking great, these free standing walls serve as guard rails or barrier walls to protect areas from errant traffic and other threats, and can be modified with cables or rods for additional force protection as well as with a waterproof membrane for emergency or long term flood protection. Moore Concrete has the resource to make designing your freestanding wall easy. We offer a full design service and installation support. Redi-Rock free standing walls are ideal to stand alone or integrate with a Redi-Rock retainer wall. QUALITYPRECASTSOLUTIONS
FREESTANDING BLOCK SPECIFICATIONS Straight Top Corner OPTIONAL 0.296 m 3 679 kg +/- Half 0.148 m 3 339 kg +/- 1,168 610 0.296 m 3 679 kg +/- 1168 610 356 0.226 m 3 518 kg +/- Half 0.112 m 3 257 kg +/- 1,168 610 254 190 0.128 m 3 293 kg +/- Two-Sided Cap 152 0.302 m 3 693 kg +/- 584 254 Dia. 1168 724 Half 0.151 m 3 346 kg +/- 0.326 m 3 749 kg +/- Half 0.163 m 3 372 kg +/- 1,168 1,168 584 610 610 All block styles are available with 75mm Horizontal Tube (for post tension cable) and/or 150mm Vertical Tubes (for mechanical tie-down bolts) to allow the blocks to be used in a Force Protection application. Force Protection 76 Dia. Horizontal Tube (Straight full bottom block shown) 152 Dia. Vertical Tube MOORECONCRETE
FORCE PROTECTION Redi-Rock s Force Protection System is the most innovative perimeter protection product on the market, with an appearance that reflects the Essence of Natural Rock. Post-Tension Cable and J-Bolt System: to link the blocks together. Modular Precast Concrete Blocks: If you ever need to move the wall, it can easily be disassembled and reassembled in a new location.* * Redi-Rock s barrier wall does not require a footing in most applications eliminating otherwise expensive construction costs. It installs easily using only minor construction. Testing: Redi-Rock s force protection system has been engineered and tested extensively. The post-tension cables running throughout the wall allow it to flex when impacted. This flexibility gives the wall massive stopping power, with friction absorbing the kinetic energy of, for example, an impacting vehicle. Redi-Rock post-tension cable system Suitability: All the aforementioned qualities combine to make Redi-Rock a fast, effective, re-usable solution to perimeter hostile vehicle attack. It works brilliantly as a security barrier system at: Airports Train stations Military facilities Utility and critical infrastructure SYSTEM ADVANTAGES POINT-BY-POINT: Fast to install Lego TM like system Removable / Relocatable No ground anchor uses its own weight Integral cable dissipates kinetic energy Proven to stop a 7.5 Tonne truck at 48kmph (30mph) Aesthetically pleasing, with the look of natural stone Moore Concrete Products Ltd, Caherty House, 41 Woodside Road, Ballymena, County Antrim, Northern Ireland BT42 4QH Tel: +44 (0) 28 2565 2566 Fax: +44 (0) 28 2565 8480 Web: www.moore-concrete.com Email: info@moore-concrete.com