Model # 358-R48. 7/7/2011 Page 1 of 11

Similar documents
Model # BT238-U6. 9/30/2014 Page 1 of 12

Model # 238-U6. 5/24/2013 Page 1 of 11

Model # 357-MC. 8/13/2018 Page 1 of 12

Model # 358-OP. 8/5/2014 Page 1 of 12

Model # 940PPS-V3. 2/12/2014 Page 1 of 10

Model # 158-P4. 12/12/2013 Page 1 of 11

Model # 815P-VCA3. 3/31/2011 Page 1 of 10

Model #369S-PR. 8/23/2016 Page 1 of 11

Model #369SM-RDP. 8/23/2016 Page 1 of 10

Model # 358H-PR. 4/8/2011 Page 1 of 12

Model # V. 1/31/2014 Page 1 of 8

Model # 358PS-OP. 12/13/2013 Page 1 of 12

Model #369S-RDP. 8/23/2016 Page 1 of 11

Model # 238HS-P8. 4/27/2011 Page 1 of 11

Model # 358PS-RDP. 12/13/2013 Page 1 of 12

Model # 362S-RDP. 9/17/2012 Page 1 of 12

Model # 800SM-PS3. 8/3/2016 Page 1 of 8

Model # 95-S8. Page 1 of 8

1675 Locust Street Red Bud, IL Phone: Fax: WARRANTY & TERMS

Model # 338S-OP. 9/30/2011 Page 1 of 13

Model # 922-S4. 12/18/2013 Page 1 of 8

Model # 338S-PR. 5/1/2014 Page 1 of 12

Model # BARK-358-RDP

Model # 504S-P. 9/14/2011 Page 1 of 9

Model # 338S-P. 7/31/2012 Page 1 of 13

Model # 338SM-OP. 9/30/2011 Page 1 of 12

1675 Locust Street Red Bud, IL Phone: Fax: WARRANTY & TERMS

Model # 940S-P6-BB. 6/7/2017 Page 1 of 10

Model # 964-S6. 2/3/2015 Page 1 of 8

Model #967- S6. 7/7/2016 Page 1 of 14

Model # 338S-RDP. 7/31/2012 Page 1 of 13

Model # 91-S6. 6/19/2014 Page 1 of 5

Model # 940SM-V8. Page 1 of 10

Model # 5803SM. 6/15/2018 Page 1 of 5

Model # 940SM-P8. Page 1 of 10

Model # SV-R32AU. 2/13/2015 Page 1 of 11

1675 Locust Street Red Bud, IL Phone: Fax: WARRANTY & TERMS

1675 Locust Street Red Bud, IL Phone: Fax: WARRANTY & TERMS

Model # PR /21/2018 Page 1 of 10

Model #CL-36FT. 6/22/2017 Page 1 of 6

Model # 600H-D. 4/2/2012 Page 1 of 6

Model # 612H. 7/11/2016 Page 1 of 6

Model # BARK /26/2012 Page 1 of 5

1675 Locust Street Red Bud, IL Phone: Fax: WARRANTY & TERMS

2/24/2015 Page 1 of 5

H 12 Heavy Duty Modern Tripod 8 Seat Swing Heavy Duty Hangers

COPYRIGHT 2001 BY: GAMETIME REVISED: 08/09/01

To Contact PS DOORS:

WARNING- THIS EQUIPMENT IS DESIGNED FOR ADULTS ONLY. ONLY HEALTHY PEOPLE AGES 13 AND UP SHOULD USE THE EQUIPMENT.

Made in U.S.A. Moai Bike Rack Submittal Sheet. Materials: Finishes: Mount Options: Capacity: Setbacks: 2 Bikes

Made in U.S.A. Sunrise Bike Rack Submittal Sheet. Materials: Finishes: Mount Options: Capacity: Setbacks:

IMPORTANT. Use of safety surfacing (wood mulch) in compliance with ASTM specification F1292 is required. WARNING

EASY RIDER (MUSTANG) EASY RIDER (PONY) EASY RIDER (ZEBRA) EASY RIDER (BRONCO)

FitTech UP171F ELLIPTICAL (FOOTING) UP171I ELLIPTICAL (IN GROUND) UP171S ELLIPTICAL (SURFACE) Parts List

FitTech UP166F CHEST PRESS (FOOTING) UP166I CHEST PREES (IN GROUND) UP166S CHEST PRESS (SURFACE)

B. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work.

BESTMOVE STANDING TRANSFER AID

Made in U.S.A. Wave Style Bike Rack Submittal Sheet. Materials: 1.5 Schedule 40 Steel Pipe (1.

BESTMOVE STANDING TRANSFER AID

General Guidelines. Tools Required. Steel Folding Scooter & Wheelchair Carrier Instructions for Part # SC400-V2. Safety

SECTION ORNAMENTAL WELDED STEEL FENCING

SECTION METAL STAIRS

General Guidelines. Tools Required. Safety. Deluxe Steel Folding Scooter & Wheelchair Carrier Instructions for Part # SC500-V3

OWNER S MANUAL SERIES MDS-96-BK, SM, DR

OWNER S MANUAL SERIES MDS-96-BK, SM, DR

General Guidelines. Tools Required. Instructions for Part # SC500-AF. Safety

MODEL GEK E3 Guard Enclosure Kit. Operator s Manual for Morse Guard Enclosure Kit Model GEK E3 for Can Tumbler Model E3

MODEL GEK E1 Guard Enclosure Kit. Operator s Manual for Morse Guard Enclosure Kit Model GEK E1 for Can Tumbler Model E1

EASY RIDER (MUSTANG) EASY RIDER (PONY) EASY RIDER (ZEBRA) EASY RIDER (BRONCO)

BESTMOVE STANDING TRANSFER AID

Operator s Manual for Morse Mobile-Karrier for 55-Gallon Plastic or Steel Drum

20 Portable Saw Mill OWNER S MANUAL

PAIRED LADDER SAFETY GATE Installation Instructions/Operation and Maintenance Manual

SECTION METAL STAIRS

SECTION ORNAMENTAL ALUMINUM FENCING

NOVELLA. Installation Instructions for Wall Mount Lavatory with Corner Cabinet and Storage System INTRODUCTION

UNIVERSAL UTILITY TRUCK RACK

SECTION MISCELLANEOUS METALS

LADDER SAFETY GATE Installation Instructions/Operation and Maintenance Manual

Model F-9 Picnic Table, with Perforated Steel Tops

24 Portable Saw Mill OWNER S MANUAL

SECTION ELEVATED BLEACHERS (Angle Frame Semi-Closed Deck)

1. Temperature Change: 120 deg F (67 deg C), ambient; 180 deg F (100 deg C), material surfaces.

Universal Elevator Mount Owners Manual

METAL LADDERS (LADDER SAFETY GATE FALL PROTECTION)

SECTION 2 DIVISION 05 METALS

Pallet Gate Installation Instructions and Operators Manual

Transcription:

Model # 358-R48 7/7/2011 Page 1 of 11

7/7/2011 Page 2 of 11 1675 Locust Street Red Bud, IL 62278 Phone: 618-282-8200 Fax: 618-282-8202 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic coated elements. Ultra Play guarantees all items for one full year to be free of defects in workmanship or materials when installed and maintained properly. We agree to repair or replace, any items determined to be defective. Items specifically not covered by this warranty include vandalism, man made or natural disasters, lack of maintenance, normal weathering or wear and tear due to public abuse. Damages or loss in transit is the responsibility of the carrier, whether visible or concealed. It is the responsibility of the recipient to assure that the order is received complete. Before signing the delivery receipt, inspect the shipment immediately and completely. Note any damages or shortages on the bill of lading. Damage reports must be filed within 10 days. Ultra Play is NOT responsible for damages or loss in transit. Title to all goods passes to the customer at the time of shipment. Ultra Play will assist in filing claims if the freight arrangements were made by Ultra Play at your request. CANCELLATIONS AND RETURNS: Cancellations are only accepted with approval of Ultra Play. No merchandise shall be returned without a Return Goods Authorization number which is issued by customer service. Any authorized merchandise must be carefully packed and received in saleable condition. A restocking charge of up to 25% will be applied to all returned goods when the error is not the fault of Ultra Play. All returns must be shipped freight prepaid.

7/7/2011 Page 3 of 11 SAFETY WARNINGS & EQUIPMENT INSPECTION Owners and installers please note these safety warnings and make use of this checklist on a regular basis. Follow installation instructions when erecting equipment. Ground surfaces around equipment should be restored as needed. Concrete footings should never be exposed. Surface depth should comply with ASTM and CPSC specifications. Check for and repair damage caused by wear or vandalism, a major factor in injury causing situations. All protruding bolts should be covered or cut off and finished smooth. Sharp edges on pipes should be capped or removed. Check for bent, broken, or severly worn pipe, and replace. All equipment should be free of rust and repainted whenever necessary to deter rusting. We provide our customers with layout sheets and installation instructions. Please keep on file the specifications sheet that contains the listing of every part used. Never add components not intended for use with this product. Regular maintenance is necessary in this and all park and recreational equipment to insure the safety of the user. Note: Proper maintenance of equipment requires regular tightening of all bolts, nuts, and setscrews. Note: Regular checking of all parts, castings, etc. should be made. If a part is broken or worn, it shoud be replaced immediatly. Check to be sure all fittings are tight and that bars and pipes do not move. Replace all worn S-hooks. S-hooks must be completely closed. Failure to close S-hooks can result in serious injury to the user. NEVER reuse S-hooks. Test for free movement of swing hanger and other moving attached parts. Check for worn chains and replace them. A soft resilient surface should be placed under all swings extending at least twice the height of the top rail both front and back.

7/7/2011 Page 4 of 11 HARDWARE 5/16" x 1" Machine Bolt 3/8" x 1" Carriage Bolt 5/16" x 2-1/4" Carriage Bolt 5/16" Washer 5/16" Hex Nut

7/7/2011 Page 5 of 11 TOOLS REQUIRED 1/2" & 9/16" Wrench 1/2" & 9/16" Socket Wrench Tape Measure Level

7/7/2011 Page 6 of 11 ULTRA SITE PRODUCT SPECIFICATIONS Top & Seats: Minimum of 96% commingled post-consumer or post-industrial recycled plastic. With a maximum of 4% due to various additives including color and UV stabilization to obtain desirable properties. Each seat is reinforced with ¼ steel strips. Frame: 1-5/8 O.D. x 14 gauge pre-galvanized structural steel tubing. Legs are bent over a mandrel through the bend radius producing a wrinkle free bend. Brace attachment points are 1-1/2 x2 x3/16 steel flat bar. Cross braces 1.029 O.D. x 15 gauge pre-galvanized structural steel tubing. The tabletop attachment angle is 2 x 2 x 3/16 formed steel angle which is mechanically fastened to the legs. Seat mounting angle is 2 x 2 x 3/16 formed steel angle which is MIG welded to the legs. All electrically MIG welded. Frame Coating: Electrostatic powder coated application oven cured or hot dipped galvanized. Hardware: All zinc coated steel hardware fasteners. 358-R48 48 PORTABLE TABLE WITH 4 SEAT Dimensions: Top is 48 x 47-1/2" x 30 high. Seats are 48 long x 18 high. Outside to outside dimensions of a 4 seat table is 74-1/2 square.

7/7/2011 Page 7 of 11 COMPONENTS ITEM NO. PartNo DESCRIPTION QTY 2 x 10 Brown Recycled Umbrella 1 BRN48-2x10-UT, Table Plank (48"), 2 x 10 Cedar CDR48-2x10-UT, Recycled Umbrella Table Plank GRN48-2x10-UT, or (48"), 2 x 10 Green Recycled GRY48-2x10-UT Umbrella Table Plank (48"), or 2 x 10 Gray Recycled Umbrella Table Plank (48") 1 2 3 4 BRN48-2x10-T, CDR48-2x10-T, GRN48-2x10-T, or GRY48-2x10-T BRN48-2x10-MT, CDR48-2x10-MT, GRN48-2x10-MT, or GRY48-2x10-MT BRN48-2x10-MS, CDR48-2x10-MS, GRN48-2x10-MS, or GRY48-2x10-MS 2 x 10 Brown Recycled Table Plank (48"), 2 x 10 Cedar Recycled Table Plank (48"), 2 x 10 Green Recycled Table Plank (48"), or 2 x 10 Gray Recycled Table Plank (48") 2 x 10 Brown Recycled Mitered Table Plank (48"), 2 x 10 Cedar Recycled Mitered Table Plank (48"), 2 x 10 Green Recycled Mitered Table Plank (48"), or 2 x 10 Gray Recycled Mitered Table Plank (48") 2 x 10 Brown Recycled Mitered Seat Plank (48"), 2 x 10 Cedar Recycled Mitered Seat Plank (48"), 2 x 10 Green Recycled Mitered Seat Plank (48"), or 2 x 10 Gray Mitered Seat Plank (48") 5 01-04-0183 5 Plank Angle 2 6 G-W358 358 Wood Leg 4 7 33-02-0001 5/16" Zinc Plated Washer 44 8 33-02-0002 3/8" Zinc Plated Washer 8 9 33-05-0001 5/16" x 1" Machine Bolt (Zinc) 4 10 33-01-0001 5/16" Hex Nut (Zinc) 40 11 33-01-0002 3/8" Hex Nut (Zinc) 4 12 33-06-0006 5/16" x 2 1/4" Carriage Bolt (Zinc) 36 13 33-06-0063 3/8" x 1" Carriage Bolt (Zinc) 4 14 01-04-0187 recycled 4' plank stiffener strip 8 15 P-01-04-0122 358 Crossbrace w/ Umbrella Tube 1 2 2 4 2 14 1 5 3 15 11 7 12 10 The Stiffener Strips are inserted on the bottom side of the Seat Planks before assembly. 9 13 8 6 4

7/7/2011 Page 8 of 11 STEP 1 15 10 7 9 6 Attach the Crossbrace between the 358 Legs as shown using specified hardware.

7/7/2011 Page 9 of 11 STEP 2 3 1 2 7 10 5 11 13 8 Attach the 5 Plank Angle to the 358 Legs as shown using specified hardware. Then attach the 48" Top Planks as shown using specified hardware.

7/7/2011 Page 10 of 11 STEP 3 4 12 7 10 Attach the 48" Seat Planks to the 358 Legs using specified hardware.

7/7/2011 Page 11 of 11 OVERALL DIMENSIONS 48" 74 1/2" 74 1/2" 47 1/2" 9 1/4" 17 7/8" 29 15/16"