VOLUME 1 - WINDOWS AND DOORS Window and Door Selection Guide PART 1 WINDOW SELECTION GUIDE WSG-11 PART 2 - PERFORMANCE SPECIFICATIONS Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows and Glass Doors 101/I.S. 2-97 Voluntary Performance Specification for Windows, Skylights and Glass Doors Standard/Specification for Windows, Doors, and Unit Skylights North American Fenestration Standard/Specification for windows, doors, and skylights North American Fenestration Standard/Specification for windows, doors, and skylights User Guide to NAFS-11 North American Fenestration Standard/Specification for windows, doors, and skylights 101/I.S. 2/NAFS-02 101/I.S. 2/A440-05 101/I.S. 2/A440-08 101/I.S. 2/A440-11 101-IS2-A440-11- UG 101/I.S. 2/A440-17 Voluntary Specification for Rigid Polyvinyl Chloride (PVC) Exterior Profiles 303-18 Voluntary Specification for Acrylonitrile-Butadiene-Styrene (ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends 304-07 Voluntary Specification for Fiber Reinforced Thermoset Profiles 305-18 Voluntary Specification for Laminates Intended for Use on AAMA Certified Profiles 307-16 Voluntary Specification for Cellular Polyvinyl Chloride (PVC) Exterior Profiles 308-18 Standard Specification for Classification of Rigid Thermoplastic/Cellulosic Composite Materials 309-13 Voluntary Specifications for Reinforced Thermoplastic Fenestration Exterior Profile Extrusions 310-12 Voluntary Specification for Rigid Thermoplastic Cellulosic Composite Fenestration Exterior Profiles 311-13 Voluntary Specification for the Lamination of Wood and Cellulosic Composite Materials Intended for 312-14 Use on AAMA Certified Profiles Voluntary Specification for Molded Aliphatic Polyurethane Elastomer Frame Materials 313-10 General Guidelines for Troubleshooting Welded Thermoplastic Corners 320-10 Voluntary Performance Rating Method for Mulled Fenestration Assemblies 450-10 Voluntary Laboratory Test Method to Qualify Fenestration Installation Procedures 504-05 Dry Shrinkage and Composite Performance Thermal Cycling Test Procedure (Editorially Revised) 505-17 Voluntary Specifications for Impact and Cycle Testing of Fenestration Products 506-16 Standard Practice for Determining the Thermal Performance Characteristics of Fenestration 507-15 Systems Installed in Commercial Buildings Voluntary Guide Specification for Blast Hazard Mitigation for Fenestration Systems 510-14 Voluntary Specification for Cycle Performance and Testing of Side-Hinged Exterior Door Multipoint 909-13 Locking Hardware Voluntary Life Cycle Specifications and Test Methods for AW Class Architectural Windows and 910-16 Doors Voluntary Specification for Non-Residential Fenestration Building Information Modeling (BIM) 912-13 Specification for Operating Cycle Performance of Side-Hinged Exterior Door Systems 920-16 Specification for Determining the Vertical Loading Resistance of Side-Hinged Door Systems 925-17 Voluntary Specification for Secondary Storm Products for Windows and Sliding Glass Doors 1002-11
Voluntary Specification for Side-Hinged Secondary Storm Doors 1102-11 Voluntary Specifications for Forced-Entry Resistant Aluminum Prime Windows 1302.5-76 Voluntary Specifications for Forced-Entry Resistant Aluminum Sliding Glass Doors 1303.5-76 Voluntary Specification for Forced Entry Resistance of Side-Hinged Door Systems 1304-02 Voluntary Standard for Thermal Performance of Windows, Doors and Glazed Wall Sections 1504-97 Voluntary Test Methods for Thermal Performance of Fenestration Products with Multiple Glazing 1505-09 Options Voluntary Test Method for Laboratory Heat Build-Up Effects on Fenestration Products 1506-18 Voluntary Standard for Utilization in Manufactured Housing for Primary Windows and Sliding Glass 1701.2-95 Doors *Voluntary Standard for Utilization in Manufactured Housing for Swinging Exterior Passage Doors 1702.2-95 *Voluntary Standard Egress Window Systems for Utilization in Manufactured Housing 1704-95 Voluntary Specifications for Residential Translucent Sloped Glazing Systems 2001-07 Specifications for Sunrooms (AAMA/NPEA/NSA) 2100-12 Voluntary Guideline for Engineering Analysis of Window and Sliding Glass Door Anchorage Systems 2501-06 Comparative Analysis Procedure for Window and Door Products 2502-07 Quality Assurance Processing & Monitoring Guide for Poured and Debridged Polyurethane Thermal QAG-1-09 Barriers Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers QAG-2-12 Fenestration Anchorage Guidelines TIR-A14-10 PART 3 - THERMAL AND ACOUSTICAL PERFORMANCE AND TESTS Voluntary Test Method for Thermal Transmittance and Condensation Resistance of Windows, Doors and Glazed Wall Sections Voluntary Specification for the Acoustical Rating of Windows, Doors, Skylights and Glazed Wall Sections 1503-09 1801-13 PART 4 - FIELD TESTING METHODS Voluntary Specification for Field Testing of Newly Installed Fenestration Products 502-12 Voluntary Guideline for Forensic Water Penetration Testing of Fenestration Products 511-08 Voluntary Specifications for Tornado Hazard Mitigating Fenestration Products 512-11 PART 5 - COATINGS AND FINISHES SPECIFICATIONS Cleaning and Maintenance Guide for Architecturally Finished Aluminum 609 & 610-15 Voluntary Specification for Anodized Architectural Aluminum 611-14 Voluntary Specification, Performance Requirements, and Test Procedures for Combined Coatings 612-17a of Anodic Oxide and Transparent Organic Coatings on Architectural Aluminum (Editorially Revised) Voluntary Performance Requirements and Test Procedures for Organic Coatings on Plastic 613-17a Profiles (Editorially Revised) Voluntary Specification, Performance Requirements and Test Procedures for High Performance 614-17a Organic Coatings on Plastic Profiles (Editorially Revised) Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing 615-17a Organic Coatings on Plastic Profiles (Editorially Revised) Voluntary Specifications for High Performance Organic Coatings on Coil Coated Architectural Hot 621-02 Dipped Galvanized (HDG) and Zinc-Aluminum Coated Steel Substrates Voluntary Specification, Performance Requirements and Test Procedures for Organic Coatings on 623-17a Fiber Reinforced Thermoset Profiles (Editorially Revised)
Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Fiber Reinforced Thermoset Profiles (Editorially Revised) Voluntary Specification, Performance Requirements and Test Procedures for Superior Performance Organic Coatings on Fiber Reinforced Thermoset Profiles(Editorially Revised) Voluntary Specification, Performance Requirements and Test Procedures for Exterior Stain Finishes on Wood, Cellulosic Composites and Fiber Reinforced Thermoset Window and Door Components Voluntary Specification, Performance Requirements and Test Procedures for Solar Reflective Finishes Voluntary Performance Requirements and Test Procedures for Organic Coatings on Wood and Cellulosic Composite Substrates Voluntary Specification for In-Process Quality Control Requirements for Applicators of Organic Coatings to Polyvinyl Chloride (PVC) Exterior Profiles Voluntary Specification, Performance Requirements and Test Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels Voluntary Specification, Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and Panels 624-17a 625-17a 633-11 643-16 653-14 663-14 2603-17a 2604-17a 2605-17a PART 6 - HARDWARE, WEATHERSTRIP AND SEALANT SPECIFICATIONS Voluntary Specifications for Pile Weatherstriping & Replaceable Fenestration Weatherseals 701/702-11 Voluntary Specifications for Non-Integral Door Bottom Weatherseals 703-11 Voluntary Specification for Self-Adhering Flashing Used for Installation of Exterior Wall Fenestration Products 711-13 Voluntary Specification for Mechanically Attached Flexible Flashing 712-14 Voluntary Test Method to Determine Chemical Compatibility of Sealants and Self-Adhered Flexible Flashings Voluntary Specification for Liquid Applied Flashing Used to Create a Water-Resistive Seal around Exterior Wall Openings in Buildings 713-08 714-15 Voluntary Specifications and Test Methods for Sealants 800-16 Voluntary Practice for Assessment of Single Component Aerosol Expanding Polyurethane Foams for Sealing Rough Openings of Fenestration Installations 812-04(2010) Voluntary Specification and Test Methods for Adhesives Used in Simulated Divided Lites 813-11 Fenestration Sealants Guide for Windows, Window Walls and Curtain Walls 851-09 Voluntary Specification for Rotary & Linear Operators in Window Applications 901-16 Voluntary Specification for Sash Balances 902-16 Voluntary Standard for Performance Testing of Handle Sets used with Multipoint Hardware on Side- Hinged Doors 903-12 Voluntary Specification for Multi-Bar Hinges In Window Applications 904-14 Voluntary Specification for Sliding Door and Lift and Slide Roller Assemblies 906-15 Voluntary Specification for Corrosion Resistant Coatings on Carbon Steel Components 907-15 Voluntary Specification for Friction Based Sash Balances 908-16a Voluntary Specification for Cycle Performance and Testing of Side-Hinged Exterior Door Multipoint Locking Hardware 909-13 Voluntary Specification for the Water Penetration Resistance and Structural Load Performance of 930-03 Locking/Latching Hardware Used in Side-Hinged Door Systems Airflow Through Integral Ventilating Systems/Devices TIR-A12-09
VOLUME 2 - METAL CURTAIN WALLS PART 1 METAL CURTAIN WALL MANUAL Metal Curtain Wall Manual MCWM-1-89 PART 2 TESTING Methods of Test for Exterior Walls 501-15 Standard Test Method for Water Penetration of Windows, Curtain Walls and Doors Using Dynamic Pressure Quality Assurance and Diagnostic Water Leakage Field Check of Installed Storefronts, Curtain Walls, and Sloped Glazing Systems Recommended Static Test Method for Evaluating Curtain Wall and Storefront Systems Subjected to Seismic and Wind Induced Interstory Drifts and Recommended Dynamic Test Method for Determining the Seismic Drift Causing Glass Fallout from a Wall System 501.1-17 501.2-15 501.4-09 & 501.6-09 Test Method for Thermal Cycling of Exterior Walls 501.5-07 Recommended Static Test Method for Evaluating Windows, Window Wall, Curtain Wall and Storefront Systems Subjected to Vertical Inter-Story Movements Standard Test Method for Determination of Resistance to Human Impact of Window Systems Intended for Use in Psychiatric Applications Voluntary Specification for Field Testing of Newly Installed Metal Storefronts, Curtain Walls and Sloped Glazing Systems 501.7-17 501.8-14 503-14 Standard Test Method for Static Loading and Impact on Exterior Shading Devices 514-16 PART 3 ALUMINUM CURTAIN WALL DESIGN GUIDES Voluntary Test Method and Specification for Pressure Equalized Rain Screen Wall Cladding Systems 508-14 Care and Handling of Architectural Aluminum from Shop to Site Design Wind Loads for Buildings and Boundary Layer Wind Tunnel Testing Structural Properties of Glass Structural Sealant Glazing Systems Aluminum Curtain Wall Design Guide Manual (Editorial Revision 5/05) The Rain Screen Principle and Pressure Equalized Wall Design Installation of Aluminum Curtain Walls Fire Safety in High-Rise Curtain Walls Glass and Glazing CW-10-15 CW-11-85 CW-12-84 CW-13-85 CW-DG-1-96 CW-RS-1-12 CWG-1-89 FSCOM-1-09 GAG-1-97 PART 4 TECHNICAL INFORMATION REPORTS Sound Control for Fenestration Products Structural Performance of Composite Thermal Barrier Framing Systems Design Guide for Metal Cladding Fasteners Maximum Allowable Deflection of Framing Systems for Building Cladding Components at Design Wind Loads TIR-A1-15 TIR-A8-16 TIR-A9-14 TIR-A11-15
VOLUME 3 - ALUMINUM STOREFRONT & ENTRANCE ALUMINUM STOREFRONT AND ENTRANCE MANUAL SFM-1-14 Section 1 - Terminology Part 1 Section 2 - Design Part 2 Section 3 - Hardware Part 3 Section 4 - Engineering Part 4 Section 5 - Specifications Part 5 Section 6 - References Part 6
VOLUME 4 - SKYLIGHT AND SPACE ENCLOSURES PART 1 - PERFORMANCE STANDARDS Voluntary Specification for Skylights (AAMA/WDMA) 1600/I.S. 7-00 PART 2 - DESIGN GUIDES Installation Guidelines for Unit Skylights 1607-14 Daylighting Design Guidelines for Roof Glazing in Atrium Spaces DDGA-89 Glass Design for Sloped Glazing GDSG-1-87 Structural Design Guidelines for Aluminum Framed Skylights SDGS-1-89 Skylight Handbook Design Guidelines SHDG-1-88 Two-Sided Structural Glazing Guidelines for Aluminum Framed Skylights TSGG-04 Sloped Glazing Guidelines PART 3 - TECHNICAL INFORMATION REPORTS TIR-A7-11