The Effect of Hydrogen Content on Ballistic Transport Behaviors in the Ni-Nb-Zr-H Glassy Alloys

Similar documents
Soft Magnetic Properties of Nanocystalline Fe Si B Nb Cu Rod Alloys Obtained by Crystallization of Cast Amorphous Phase

New Cu-based Bulk Metallic Glasses with High Strength of 2000 MPa

Formation and Soft Magnetic Properties of Co Fe Si B Nb Bulk Glassy Alloys

Synthesis and Fundamental Properties of Cu-Based Bulk Glassy Alloys in Binary and Multi-component Systems

Structure Analyses of Fe-based Metallic Glasses by Electron Diffraction

Magnetic Domain Structure of Nanocrystalline Zr 18-x Hf x Co 82 Ribbons: Effect of Hf

Rotation mechanism of shear fracture induced by high plasticity in Ti-based nano-structured composites containing ductile dendrites

Nanocrystalline structure and Mechanical Properties of Vapor Quenched Al-Zr-Fe Alloy Sheets Prepared by Electron-Beam Deposition

Schottky Tunnel Contacts for Efficient Coupling of Photovoltaics and Catalysts

Fabrication of Ti-Ni-Zr Shape Memory Alloy by P/M Process

Excimer Laser Annealing of Hydrogen Modulation Doped a-si Film

a) The self-diffusion coefficient of a metal with cubic structure can be expressed as

Characterization of Nano-Scale Fine Precipitates in Al-Mg-Si Alloys for Automotive Applications

Fabrication of high performance MgB 2 wires by an internal Mg diffusion process

Solar cells conversion efficiency enhancement techniques

Electronic structure and x-ray-absorption near-edge structure of amorphous Zr-oxide and Hf-oxide thin films: A first-principles study

EFFECTS OF MICROWAVE ABSORPTION ON LONG AND SHORT SINGLE-WALLED CARBON NANOTUBES AT 10-6 TORR

Devitrification of rapidly quenched Al Cu Ti amorphous alloys

Effect of aromatic hydrocarbon addition on in situ powder-in-tube processed MgB 2

Structure and optical properties of M/ZnO (M=Au, Cu, Pt) nanocomposites

Amorphous Silicon Solar Cells

Hahn-Meitner-Institut Berlin, Glienicker Str. 100, D-14109, Berlin, Germany

The local atomic packing of a single-component glass is quasi-crystalline

Upconversion. How to get high-frequency laser light from longer wavelength sources?

80 Development of REBa2Cu3Ox Coated Conductor on Textured Metal Substrate

S.C. COLAK, E. ARAL Physics Department,Faculty of Art and Science, Osmangazi University, Eskişehir, TURKEY.

INVESTIGATION OF STRUCTURAL CHANGES IN METALLIC GLASS Fe 18Cο60Si9B 13

Annealing Effect on Mechanical Properties of Ti-Al Alloy/Pure Ti Harmonic-Structured Composite by MM/SPS Process

Hyperfine field distributions in disordered Mn 2 CoSn and Mn 2 NiSn Heusler alloys

Electronic and electrochemical properties of Mg 2 Ni alloy doped by Pd atoms *

Nonlinear Thickness and Grain Size Effects on the Thermal Conductivity of CuFeSe 2 Thin Films

The Influence of Nanocrystalization of the FeSiB Amorphous Alloy by Means of Nd: YAG Pulsed Laser heating on its Magnetic Properties.

CHARACTARISTICS OF DAMAGE AND FRACTURE PROCESS OF SOLID OXIDE FUEL CELLS UNDER SIMULATED OPERATING CONDITIONS BY USING AE METHOD

Evaluation of 4 Fe-doped InP wafers using a scanning photoluminescence technique

Surface Analysis of Electrochromic Switchable Mirror Glass Based on Magnesium-Nickel Thin Film in Accelerated Degradation Test

Free Electron Model What kind of interactions hold metal atoms together? How does this explain high electrical and thermal conductivity?

XRD and TEM analysis of microstructure in the welding zone of 9Cr 1Mo V Nb heat-resisting steel

Extruded Rods with <001> Axial Texture of Polycrystalline Ni-Mn-Ga Alloys

A vapor (or gas) needs a completely enclosed container to have a definite volume; it will readily take on any shape imposed.

Iron-based bulk metallic glasses

Microstructural Evolution of Ti-Mo-Ni-C Powder by Mechanical Alloying

High aspect ratio nanostructures: nanotubes, wires, plates, and ribbons. Outline

Combinatorial RF Magnetron Sputtering for Rapid Materials Discovery: Methodology and Applications

Second stage cooling from a Cryomech PT415 cooler at second stage temperatures up to 300 K with cooling on the first-stage from 0 to 250 W

Quenching steels with gas jet arrays

Free Electron Model What kind of interactions hold metal atoms together? How does this explain high electrical and thermal conductivity?

Light-Induced Degradation of Thin Film Silicon Solar Cells

Mould fluxes for steelmaking - composition design and characterisation of properties. Research Institute, Stockholm

Hf Doping Effect on Hard Magnetism of Nanocrystalline Zr18-x HfxCo82 Ribbons

Effect of Nitrogen Addition on Superelasticity of Ti-Zr-Nb Alloys* 1

1. ORDER AND DISORDER

The effect of ion milling on the morphology of ramp-type Josephson junctions

Deformation Twinning in Bulk Aluminum with Coarse Grains

Novel concept of rechargeable battery using iron oxide nanorods. anode and nickel hydroxide cathode in aqueous electrolyte

Structural relaxation in metallic glasses

Magnetic Force Microscopy: nanoscale magnetic imaging and lithography

High-Resolution, Electrohydrodynamic Inkjet Printing of Stretchable, Metal Oxide Semiconductor Transistors with High Performances

Molecular dynamic simulations of the high-speed copper nanoparticles collision with the aluminum surface

Nanosilicon single-electron transistors and memory

Simulation and Experimental Analysis of Metal Jet Emission and Weld Interface Morphology in Impact Welding* 1

The application of nano metal powder

Energy Efficiency of Amorphous Metal Based Transformers. R. Hasegawa Metglas, Inc 440 Allied Drive, SC USA

Diode laser beam absorption in laser transformation hardening of low alloy steel

Experiment 2b X-Ray Diffraction* Optical Diffraction Experiments

METASTABLE PHASES AND NANOSTRUCTURING OF Fe-Nb-Si-B BASE RAPIDLY QUENCHED ALLOYS

Transmission Electron Microscopy (TEM) Prof.Dr.Figen KAYA

Towards scalable fabrication of high efficiency polymer solar cells

Cu(In,Ga)Se 2 FILM FORMATION FROM SELENIZATION OF MIXED METAL/METAL-SELENIDE PRECURSORS

Electromagnetic Casting Technique for Slab Casting

Alloys and Solid Solutions

In-Process Monitoring and Adaptive Control in Micro Welding with a Single-Mode Fiber Laser.

The principle Of Tungsten Inert Gas (TIG) Welding Process

Ceramic and glass technology

CHAPTER 3 EFFECT OF L -LYSINE MONOHYDROCHLORIDE DIHYDRATE ON THE GROWTH AND PROPERTIES OF ADP SINGLE CRYSTALS

All-solid-state Li battery using a light-weight solid electrolyte

Texture and Microstructure of Ti-Ni Melt-Spun Shape Memory Alloy Ribbons

Generation Response. (Supporting Information: 14 pages)

Simulation of Performance of Cadmium Telluride Solar Cell Using AMPS-1D Program

Single Crystal Growth of Aluminum Nitride

Laser Welding of Engineering Plastics

nano-ta TM : Nano Thermal Analysis

Hydrothermal Synthesis of Zinc Oxide Nanowires on Kevlar using ALD and Sputtered ZnO Seed Layers

Effects of Phase Constitution of Zr-Nb Alloys on Their Magnetic Susceptibilities

MIT Amorphous Materials

Amorphous Metallic Glass as New High Power and Energy Density Anodes For Lithium Ion Rechargeable Batteries

16.2 Scanning Infrared Spectrometers

1. Introduction. 2. COMD Mechanisms. COMD Behavior of Semiconductor Laser Diodes. Ulrich Martin

Preparation and Characterization of Micro-Crystalline Hydrogenated Silicon Carbide p-layers

Click to edit Master title style

An XPS and Atomic Force Microscopy Study of the Micro-Wetting Behavior of Water on Pure Chromium* 1

Microstructure and texture of asymmetrically rolled aluminium and titanium after deformation and recrystallization

EXPERIMENTAL INVESTIGATION ON COOLING RATE FOR CENTRIFUGAL CASTING Kirti Kanaujiya, Yugesh Mani Tiwari Department of Mechanical Engineering

Electronically switchable diffractive optical elements

and Technology of Thin Films

OF ALLOY 718 DURING VACUUM ARC REMELTING WITH HELIUM GAS COOLING BETWEEN INGOT AND CRUCIBLE. L. G. Hosamani, W. E. Wood* and J. H.

Ultrastrong and Ultrastable Metallic Glass

Relationship between Hydrogen Absorption and Corrosion Behavior of Ti-6Al-4V Alloy Immersed in Acidic Fluoride Solutions

Transparent Ceramic Yb 3+ :Lu2O3 Materials

Hybrid atomization method suitable for production of fine spherical lead-free solder powder

Transcription:

Int. J. Mol. Sci. 2012, 13, 180-186; doi:10.3390/ijms13010180 Article OPEN ACCESS International Journal of Molecular Sciences ISSN 1422-0067 www.mdpi.com/journal/ijms The Effect of Hydrogen Content on Ballistic Transport Behaviors in the Ni-Nb-Zr-H Glassy Alloys Mikio Fukuhara * and Yoshimasa Umemori Institute for Materials Research, Tohoku University, Sendai 980-8577, Japan; E-Mail: umemori@imr.tohoku.ac.jp * Author to whom correspondence should be addressed; E-Mail: fukuhara@imr.tohoku.ac.jp; Tel.: +81-22-215-2610; Fax: +81-22-215-2381. Received: 9 October 2011; in revised form: 6 December 2011 / Accepted: 14 December 2011 / Published: 23 December 2011 Abstract: The electronic transport behaviors of (Ni 0.39 Nb 0.25 Zr 0.35 ) 100 x H x (0 x < 23.5) glassy alloys with subnanostructural icosahedral Zr 5 Nb 5 Ni 3 clusters have been studied as a function of hydrogen content. These alloys show semiconducting, electric current-induced voltage (Coulomb) oscillation and ballistic transport behaviors. Coulomb oscillation and ballistic transport occur at hydrogen contents between 6.7 and 13.5 at% and between 13.5 and 21.2 at%, respectively. These results suggest that the localization effect of hydrogen in the clusters plays an important role in various electron transport phenomena. Keywords: glassy alloy; centimeter-sized ballistic transport; hydrogen doping; icosahedral cluster 1. Introduction Glassy alloys are peculiar metallic alloys because they lack, on the nanoscale, the long-range translational order of crystalline alloys [1]. Therefore, much attention has been devoted to examining their diverse electronic characteristics. In particular, we have found that (Ni 0.39 Nb 0.25 Zr 0.35 ) 100-x H x (0 < x < 20) alloys are characterized by semi-, superior (ballistic)- and superconductivity, and these alloys show electron avalanche and Coulomb oscillation at higher hydrogen content [2]. Following the discovery of centimeter-sized ballistic conductivity, we have studied a rotating speed effect on electronic transport

Int. J. Mol. Sci. 2012, 13 181 behaviors of Ni-Nb-Zr-H glassy alloys. Supercooling (104.7-m/s) of the molten alloy produces a ballistic conductor with electrical conductivity of about 0.1 nω cm (0.01% of silver (1.62 μω cm)) for (Ni 0.39 Nb 0.26 Zr 0.35 ) 97.8 H 2.2 glassy alloy and a room-temperature discrete Coulomb oscillation for (Ni 0.39 Nb 0.25 Zr 0.35 ) 95.2 H 4.8 glassy alloy [3]. The increase in degree of amorphousness by supercooling induces uniformity of cluster morphology, leading to superior conductivity and quantization of Coulomb oscillation. We postulated the existence of macroscopic quantum electron tunnels passing along the millimeter-sized zigzag paths of atomic bond arrays with a large capacitance (of the order of several femtofarad) among Ni-centered ideal [4] and Zr-centered distorted [3,5] icosahedral Zr 5 Ni 5 Nb 3 clusters for ballistic transport and Coulomb oscillation, respectively, although the amorphous structure in glassy alloys is composed of a large number of low symmetry-clusters located around the main icosahedral ones. In this study, we report the effect of hydrogen content on ballistic transport behaviors in the Ni 39 Nb 25 Zr 35 glassy alloys with subnanometer-scale sized clusters, as a representative composition for ballistic behavior. This superior conducting behavior resembles the ballistic transport observed in one-dimensional, nanometer-scale channels, such as quantum wires [6], carbon nanotubes [7,8] and GaAs-AlGaAs [9] at low temperature, in the form of quantum interference associated with coherence. The ballistic electron transport effect is promising for future electron devices and electric power applications such as lower supply voltage and leading to low power consumption. However, no research work has been carried out on this subject for glassy alloys with hydrogen, as far as we know. 2. Experimental The rotating wheel method under a helium atmosphere was used for preparing amorphous Ni 39 Nb 25 Zr 35 alloy ribbons of 1-mm width and 20-μm thickness, using of rotation speed of 6000-rpm (62.8-m/s). Hydrogen charging was carried out electrolytically in 0.5 M H 2 SO 4 and 1.4 g/l thiourea (H 2 NCSNH 2 ) at room temperature and current densities of 30 A/m 2 [10 13]. The charged specimens passed one week after charging were used in order to prevent inhomogeneous distribution of hydrogen. The amounts of hydrogen absorbed in the specimens were measured by the inert gas carrier melting-thermal conductivity method. The structure of the glassy alloy was identified by X-ray diffraction with Cu Kα radiation in the grazing incident mode. The specific electrical resistance of hydrogenated specimens was measured by the four-probe method DC and AC Current Source 6221, Nano Voltmeter 2182A (Keithley Instruments Inc.) with a dc current of ±1 ma at cooling and heating rates of 0.017 K/s from 373 K to 6 K in He of ambient pressure (Top Loading Refrigerated Cryostat; JECC Torisha Co.) [2 5,9 13]. The distance between the two voltage electrodes was 20 mm. To make clear hydrogen inhomogeneous effect, we also measured resistivity after polishing on both sides by 5 μm. 3. Results and Discussion Visibly, all the ribbons prepared by rotating wheel method were mirror-like and showed good toughness. Change from argon to helium atmosphere gasses makes the surface smooth due to

Int. J. Mol. Sci. 2012, 13 182 one-order higher thermal conductivity of helium (Ar: 0.1772 W/(m K), He: 0.152 W/(m K) [14]). This material showed three kinds of transport behaviors, semi-conducting, Coulomb oscillation and ballistic transport behaviors. For a cooling run of the polished (Ni 0.39 Nb 0.26 Zr 0.35 ) 90.5 H 9.5 glassy alloy, the resistivity (Figure 1a) shows a sluggish increase from 300 K down to 6.5 K (similar to a semiconducting material). The same trend is also shown for a heating run up to 163 K in (Figure 1b). However, the resistivity shows current-induced discrete oscillations in a temperature region of between 163 to 295 K. Quantization of Coulomb oscillation is associated with a high number of subnanometer-sized RC circuits constructed by a pair of pointed Zr 5 Ni 5 Nb 3 cluster channels and perpendicularly connecting cluster array reservoirs that contain subnanometer-sized capacitors in the alloy [13]. It has already been reported that the Coulomb oscillation is periodic [10 12]. Figure 1. The temperature dependence of the resistivity of polished (Ni 0.39 Nb 0.26 Zr 0.35 ) 90.5 H 9.5 glassy alloy in cooling run (a) and heating run (b). When hydrogen content increases over 13.5 at%, ballistic transport behavior occurs. Figure 2 is a representative example for polished (Ni 0.39 Nb 0.26 Zr 0.35 ) 85 H 15 glassy alloy. In cooling run, the resistivity decreases almost linearly down to 170 K and then suddenly reduces by three orders of magnitude at 165 K and falls down again to order of 0.001 μω cm at 88 K. Subsequently the resistivity recovers abruptly on the extended line of the cooling curve between 330 and 170 K, and then ascends once again as temperature decreases. In the heating run, the resistivity decreased according to the same curve as the cooling run, except for a drop down to order of 0.001 μω cm between 130 and 172 K. The resistivity (0.1 nω cm) at 130 K in heating run is around 0.006% of silver (1.62 μω cm) at room temperature.

Int. J. Mol. Sci. 2012, 13 183 Figure 2. The temperature dependence of the resistivity of polished (Ni 0.39 Nb 0.26 Zr 0.35 ) 85 H 15 glassy alloy in cooling run (a) and heating run (b). To ensure the reproducibility of these changes of the resistance and the domain of existence of the ballistic transport effect, we repeated the cooling and heating runs four times measurement of ballistic transport behavior in a temperature region of between 300 and 6 K using the polished (Ni 0.39 Nb 0.26 Zr 0.35 ) 78.8 H 21.2 glassy alloy. The 2nd and 4th runs followed repeatedly the 1st and 3rd runs, respectively, but the 3rd runs were carried out after 5 days of the 2nd runs. The ballistic transport occurs in both cooling and heating runs for the 1st and 2nd runs, but in the heating run alone for the 3rd and 4th runs. Since a metal/ballistic transition occurs within narrow temperature region, the transition would be derived from morphology changes associated with two types of cluster ordering: topological ordering and compositional short-range orderings [15]. As can be seen from Figures 2 and 3, the ballistic transport occurs in a temperature region of between 65 and 230 K, but there is no regular rule for holding temperature region. Therefore, the increase in degree of amorphousness, i.e., supercooling of the molten alloy will help uniformity of cluster morphology [3], leading to occurrence of ballistic transport up to 272 K. Since it is assumed that the mean free path of electrons in a glassy alloy is much larger than the width of the tunnels (0.23 nm [5]) between the clusters, we can imagine the existence of macroscopic quantum electron tunnels passing along the arrays. Furthermore, the Coulomb oscillation, which is observed for alloy with lower hydrogen content (in Figure 1b), revealed in lower temperature region of the 4th cooling run. For this reason, we assume that repeated cooling/heating runs induces formation of capacitance tunnels with femtofarad capacitance among clusters. We summarize electronic transport behaviors for cooling and heating runs of the hydrogenated (Ni 0.39 Nb 0.25 Zr 0.35 ) 100-x H x (0 x < 23.5) glassy alloys before and after polishing (Figure 4). The glassy alloys display three-kinds of electronic transport behaviors, semiconducting, ballistic transports and Coulomb oscillation. The Coulomb oscillation occurs below hydrogen content of 13.5 at% except for 21.2 at% H-specimen under repeated cooling and heating runs, and the ballistic transport appears at hydrogen content region of between 13.5 and 21.2 at%. This trend is similar to previous result of hydrogenated (Ni 0.39 Nb 0.25 Zr 0.35 ) 100 x H x (0 < x < 20) glassy alloys obtained by rotating speed of

Int. J. Mol. Sci. 2012, 13 184 3000 rpm (31.4 m/s) [2]. In addition, we observed the stability of the resistance with the time at a constant temperature in the region characterized by these Coulomb oscillation and ballistic transport phenomena. Furthermore, we observed similar behaviors on ribbons prepared from different batches. Figure 3. The temperature dependence of the resistivity of polished (Ni 0.39 Nb 0.26 Zr 0.35 ) 78.8 H 21.2 glassy alloy in the 1st cooling and heating runs (a); the 2nd runs (b); the 3rd runs (c); and the 4th runs (d). Figure 4. The effect of H content on the occurrence of semiconducting, ballistic transport and Coulomb oscillation properties of the (Ni 0.39 Nb 0.25 Zr 0.35 ) 100 x H x (0 x < 23.5) glassy alloys.

Int. J. Mol. Sci. 2012, 13 185 From these results, we assume that for Coulomb oscillation, the inhomogeneous hydrogen absorption below hydrogen content of 13.5 at% in Ni-centered ideal icosahedral clusters facilitates formation of subnanometer scaled capacitance tunnels, and for ballistic transport, full hydrogen absorption into the clusters in hydrogen content between 13.5 and 21.2 at% assists regular array formation of clusters. The ballistic transport and Coulomb oscillation prefer to occur in heating run rather than in cooling run. This suggests that occurrence of both phenomena needs higher degree of amorphousness, i.e., uniformity of cluster morphology. Furthermore, we found a similar resistance result for electronic transport behaviors of the hydrogenated glassy alloys before and after polishing. This indicates that there is no inhomogeneous distribution effect of hydrogen. 4. Conclusions Characteristic electric resistivity of the (Ni 0.39 Nb 0.25 Zr 0.35 ) 100 x H x (0 x < 23.5) glassy alloys with Ni-centered subnanostructural icosahedral Zr 5 Nb 5 Ni 3 clusters was measured in a temperature region of between 330 and 6 K. The glassy alloys display three-kinds of electronic transport behaviors, semiconducting, ballistic transports and Coulomb oscillation. The resistivity of the (Ni 0.39 Nb 0.25 Zr 0.35 ) 100 x H x (6.7 < x < 13.5) alloys showed the electric current-induced voltage (Coulomb) oscillation. The hydrogenated (Ni 0.39 Nb 0.25 Zr 0.35 ) 100 x H x alloy (13.5 < x < 21.2) revealed ballistic transport in a temperature region of between 65 and 230 K, which was around 0.006% of resistivity of silver at room temperature. However, there was no regular rule for holding the temperature region. From these results, we assume that for Coulomb oscillation, the inhomogeneous hydrogen absorption below hydrogen content of 13.5 at% in Ni-centered ideal icosahedral clusters, facilitates formation of subnanometer scaled capacitance tunnels on the outer space of the clusters; and for ballistic transport, full hydrogen absorption into the clusters in hydrogen content between 13.5 and 21.2 at%, assists regular array formation of clusters. Thus this paper will throw new light for innovative technologies based on cluster science. Acknowledgements This work was supported by a Grant-in-Aid for Science Research in a Priority Area, Advanced Materials Development and Integration of Novel Structured Metallic Glasses and Inorganic Materials, from the Ministry of Education, Science, Sports and Culture, Japan. References 1. Yavari, A.R. Materials science: A new order for metallic glasses. Nature 2006, 439, 405 406. 2. Fukuhara, M.; Yoshida, H.; Koyama, K.; Inoue, A.; Miura, Y. Electronic transport behaviors of Ni-Nb-Zr-H glassy alloys. J. Appl. Phys. 2010, 107, 033703. 3. Fukuhara, M.; Yoshida, H. Rotating speed effect on electronic transport behaviors of Ni-Nb-Zr-H glassy alloys. J. Alloys Comp. 2011, doi:10.1016/j.jallcom.2011.11.014.

Int. J. Mol. Sci. 2012, 13 186 4. Matsuura, N.; Fukuhara, M.; Konno, K; Fujita, T.; Chen, M.W.; Fujima, N.; Inoue, A. Distorted icosahedral Ni 5 Nb 3 Zr 5 clusters in the as-quenched and hydrogenated amorphous (Ni 0.6 Nb 0.4 ) 0.65 Zr 0.35 alloys. J. Non-Cryst. Solids 2011, 357, 3357 3360. 5. Fukuhara, M.; Fujima, N.; Oji, H.; Inoue, A.; Emura, S. Structures of the icosahedral clusters in Ni-Nb-Zr-H glassy alloys determined by first-principles molecular dynamics calculation and XAFS measurements. J. Alloys Comp. 2010, 497, 182 187. 6. Webbs, R.A.; Washborn, S.; Umbach, C.P.; Laibowitz, R.B. Observation of h/e Aharonov-Bohm oscillations in normal-metal rings. Phys. Rev. Lett. 1985, 54, 2696 2699. 7. Bokarth, M.; Cobden, D.H.; Mceuren, P.L.; Chopra, N.G.; Zettl, A.; Thess, A.; Smalley, R.E. Single-electron transport in ropes of carbon nanotube. Science 1997, 275, 1922 1925. 8. Berger, C.; Poncharal, P.; Yi, Y.; De Heer, W. Ballistic conduction in multiwalled carbon nanotubes. J. Nanosci. Nanotechnol. 2003, 3, 171 177. 9. Wharam, D.A.; Thornton, T.J.; Newbury, R.; Peper, M.; Ahmed, H.; Frost, J.E.F.; Hasko, D.G.; Peacock, D.C.; Ritchie, D.A.; Jones, G.A.C. One-dimensional transport and the quantization of the ballistic resistance. J. Phys. C Solid State Phys. 1988, 21, L209 L214. 10. Fukuhara, M.; Kawashima, A.; Yamaura, S.; Inoue, A. Coulomb oscillation of a proton in a Ni-Nb-Zr-H glassy alloy with multiple junctions. Appl. Phys. Lett. 2007, 90, doi:10.1063/1.2739080. 11. Fukuhara, M.; Yamaura, S.; Inoue, A. A proton dot tunneling in a Ni-Nb-Zr-H glassy alloy with multiple junctions. J. Phys. Conf. Ser. 2009, 144, 012086. 12. Fukuhara, M.; Inoue, A. Room-temperature Coulomb oscillation of a proton dot in Ni-Nb-Zr-H glassy alloys with nanofarad capacitance. J. Appl. Phys. 2009, 105, doi:10.1063/1.3100041. 13. Fukuhara, M.; Inoue, A. Effect of current on Coulomb oscillation in a Ni-Nb-Zr-H glassy alloy with multiple junctions. Appl. Phys. Lett. 2010, 97, doi:10.1063/1.3527084. 14. Barbalace, K.L. Periodic Table of Elements-Sorted by Thermal Conductivity. EnvironmentalChemistry.com. 1995 2011. Available online: http://environmentalchemistry.com/ yogi/periodic/thermal.html (accessed on 10 March 2011). 15. Egami, T. Structural relaxation in amorphous alloys-compositional short range ordering. Mater. Res. Bull. 1978, 13, 557 562. 2012 by the authors; licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution license (http://creativecommons.org/licenses/by/3.0/).