CUSTOM wall systems A vertsatile program that creates true custom, built-to-spec wall systems and components 1219-030 Base with finished top Perfect Fit Custom Wall Systems / CLASSIC CHERRY COLLECTION 73
CUSTOM wall systems This program offers you the opportunity to create your own customizable, wall system or entertainment components. With designer hardware and styling options, you'll be on your way to enjoying attractive storage and media solutions 2 standard base heights 2 standard base depths 2 standard top heights 2 standard top depths custom sizes available 74 CLASSIC CHERRY COLLECTION / Perfect Fit Custom Wall Systems
Fit Custom Wall Systems / CLASSIC CHERRY COLLECTION 75
standard components Top Units Top Units available in two widths, two depths and two heights. 36" WIDE Top Units Interior Dimensions: 1226-500 thru 530 34-1/2W 22D 48-1/2H 1226-000 thru 030 34-1/2W 14D 48-1/2H 1228-500 thru 530 34-1/2W 22D 60-1/2H 1228-000 thru 030 34-1/2W 14D 60-1/2H 1226-500 Open Top 36W 24D 53-1/2H 1226-000 Open Top 36W 16D 53-1/2H 1226-510 Wood 36W 24D 53-1/2H 1226-010 Wood 36W 16D 53-1/2H 1226-520 Mullioned 36W 24D 53-1/2H 1226-020 Mullioned 36W 16D 53-1/2H 1226-530 Glass 36W 24D 53-1/2H 1226-030 Glass 36W 16D 53-1/2H 20" WIDE Top Units Interior Dimensions: 1225-500 thru 530 18-1/2W 22D 48-1/2H 1225-000 thru 030 18-1/2W 14D 48-1/2H 1227-500 thru 530 18-1/2W 22D 60-1/2H 1227-000 thru 030 18-1/2W 14D 60-1/2H Base Units 1225-500 Open Top 20W 24D 53-1/2H 1225-000 Open Top 20W 16D 53-1/2H 1225-510 Wood 20W 24D 53-1/2H 1225-010 Wood 20W 16D 53-1/2H 1225-520 Mullionedt 20W 24D 53-1/2H 1225-020 Mullioned 20W 16D 53-1/2H 1225-530 Glass 20W 24D 53-1/2H 1225-030 Glass 20W 16D 53-1/2H Base Units available in two widths, two depths and two heights. 36" WIDE Base Units Interior Dimensions: 1212-500 / 510 34-1/2W 22D 24H 1212-000 / 010 34-1/2W 14D 24H 1212-500 Open Base 36W 24D 30-1/2H 1212-000 Open Base 36W 16D 30-1/2H 1212-510 Wood Door Base 36W 24D 30-1/2H 1212-010 Wood Door Base 36W 16D 30-1/2H 1212-520 Three Drawer Base 36W 24D 30-1/2H 1212-020 Three Drawer Base 36W 16D 30-1/2H 1214-500 / 510 34-1/2W 22D 36H 1214-000 / 010 34-1/2W 14D 36H 20" WIDE Base Units Interior Dimensions: 1211-500 / 510 18-1/2W 22D 24H 1211-000 / 010 18-1/2W 14D 24H 1213-500 / 510 18-1/2W 22D 36H 1213-000 / 010 18-1/2W 14D 36H 1211-500 Open Base 20W 24D 30-1/2H 1211-000 Open Base 20W 16D 30-1/2H 1211-510 Wood Door Base 20W 24D 30-1/2H 1211-010 Wood Door Base 20W 16D 30-1/2H 1211-520 Three Drawer Base 20W 24D 30-1/2H 1211-020 Three Drawer Base 20W 16D 30-1/2H 76 CLASSIC CHERRY COLLECTION / Perfect Fit Custom Wall Systems
specifications OVERALL Combine different size bases and tops for overall heights of 84", 96" and 108". Important Notes 1228-500 Open Top 36W 24D 65-1/2H 1228-000 Open Top 36W 16D 65-1/2H 1228-510 Wood 36W 24D 65-1/2H 1228-010 Wood 36W 16D 65-1/2H 1228-520 Mullioned 36W 24D 65-1/2H 1228-020 Mullioned 36W 16D 65-1/2H 1228-530 Glass 36W 24D 65-1/2H 1228-030 Glass 36W 16D 65-1/2H Because of top moulding overhang, allow an additional 6 inches to overall configuration width. When specifying units with different overall heights, allow an additional 4" depth for moulding clearance. TOPS Open Wood Doors Glass Doors Mullioned Glass Doors 53-1/2H - standard 3 shelves 65-1/2H - standard 4 shelves 1227-500 Open Top 20W 24D 65-1/2H 1227-000 Open Top 20W 16D 65-1/2H 1227-510 Wood 20W 24D 65-1/2H 1227-010 Wood 20W 16D 65-1/2H 1227-520 Mullioned 20W 24D 65-1/2H 1227-020 Mullioned 20W 16D 65-1/2H 1227-530 Glass 20W 24D 65-1/2H 1227-030 Glass 20W 16D 65-1/2H lighting standard on open or glass door tops wood-framed glass shelves standard optional wood shelves or full glass shelves available at additional cost vented finished top standard BASES Open wood shelves standard Wood Doors 1214-500 Open Base 36W 24D 42-1/2H 1214-000 Open Base 36W 16D 42-1/2H 1214-510 Wood Door Base 36W 24D 42-1/2H 1214-010 Wood Door Base 36W 16D 42-1/2H 1214-520 Four Drawer Base 36W 24D 42-1/2H 1214-020 Four Drawer Base 36W 16D 42-1/2H wood shelves standard 30-1/2H - standard 1 shelf 42-1/2H - standard 2 shelves Drawers 30-1/2H - standard 3 drawers 42-1/2H - standard 4 drawers Note: 1213-500 Open Base 20W 24D 42-1/2H 1213-510 Wood Door Base 20W 24D 42-1/2H 1213-520 Four Drawer Base 20W 24D 42-1/2H If base unit is ordered without a top unit, a finished top surface must be ordered at an additional charge. 1213-000 Open Base 20W 16D 42-1/2H 1213-010 Wood Door Base 20W 16D 42-1/2H 1213-020 Four Drawer Base 20W 16D 42-1/2H Perfect Fit Custom Wall Systems / CLASSIC CHERRY COLLECTION 77
Bar Units All Bar Units include mirrored back, interior lighting, overhead rack for stemmed glasses, formica work surface, wine rack, vented finished top and door lock. The 65-1/2H Bar Units also contain one adjustable overhead storage shelf. Bar Units available with a 30-1/2H base only. standard components Entertainment Centers Standard with lighting, vented finished top and vented TV area. Please refer to page 83 for standard Wire Management Access Areas. TV opening: 53-1/2W 22-1/2D 38H Base: 2 sections / each: 26W 22D 24H one tier of adjustable wood shelves TV opening: 53-1/2W 22-1/2D 38H Base: 2 sections / each: 26W 22D 24H one tier of adjustable wood shelves TV opening: 53-1/2W 22-1/2D 38H Base: 2 sections / each: 26W 22D 36H two tiers of adjustable wood shelves TV opening: 53-1/2W 22-1/2D 38H Base: 2 sections / each: 26W 22D 36H two tiers of adjustable wood shelves 1226-511 Wood 36W 24D 53-1/2H 1228-511 Wood 36W 24D 65-1/2H 1215-010 Entertainment Center 55W 24D 84H 1216-010 Entertainment Center 55W 24D 96H 1217-010 Entertainment Center 55W 24D 96H 1218-010 Entertainment Center 55W 24D 108H 1226-011 Wood 36W 16D 53-1/2H 1228-011 Wood 36W 16D 65-1/2H TV opening: 44W 22-1/2D 33H Base interior: 44W 22D 24H one tier of adjustable wood shelves TV opening: 44W 22-1/2D 33H Base interior: 44W 22D 24H one tier of adjustable wood shelves TV opening: 44W 22-1/2D 33H Base interior: 44W 22D 36H two tiers of adjustable wood shelves TV opening: 44W 22-1/2D 33H Base interior: 44W 22D 36H two tiers of adjustable wood shelves 1226-521 Mullioned 36W 24D 53-1/2H 1226-021 Mullioned 36W 16D 53-1/2H 1228-521 Mullioned 36W 24D 65-1/2H 1228-021 Mullioned 36W 16D 65-1/2H 1215-000 Entertainment Center 45-1/2W 24D 84H Corner Units 1216-000 Entertainment Center 45-1/2W 24D 96H 1217-000 Entertainment Center 45-1/2W 24D 96H 1218-000 Entertainment Center 45-1/2W 24D 108H Standard with finished top 1234-000 Corner Unit 16W 16D 84H 1234-100 Corner Unit 16W 16D 96H 1235-000 Corner Unit 16W 16D 96H 1235-100 Corner Unit 16W 16D 108H consists of 53-1/2H top 30-1/2H base consists of 65-1/2H top 30-1/2H base consists of 53-1/2H top 42-1/2H base consists of 53-1/2H top 42-1/2H base 1226-531 Glass 36W 24D 53-1/2H 1226-031 Glass 36W 16D 53-1/2H 1228-531 Glass 36W 24D 65-1/2H 1228-031 Glass 36W 16D 65-1/2H interior top: 13W 11-1/4D 48-1/2H interior base: 13W 11-1/4D 24H interior top: 13W 11-1/4D 60-1/2H interior base: 13W 11-1/4D 24H interior top: 13W 11-1/4D 48-1/2H interior base: 13W 11-1/4D 36H interior top: 13W 11-1/4D 60-1/2H interior base: 13W 11-1/4D 36H 78 CLASSIC CHERRY COLLECTION / Perfect Fit Custom Wall Systems
examples: Entertainment Bases Example #1 Please refer below for standard Wire Management Access Areas. 1226-020 1226-020 1235-000 1235-000 1219-010 Entertainment Base 47W 25-1/2D 30-1/2H Interior Dimensions: 44W 22D 24H Finished top One adjustable wooden shelf 1219-020 Entertainment Base 47W 25-1/2D 42-1/2H Interior Dimensions: 44W 22D 36H Finished top One adjustable wooden shelf 1214-020 1214-020 1218-010 1219-030 Entertainment Center 56-1/2W 25-1/2D 30-1/2H Two sections Interior Dimensions of each: 26W 22D 24H Finished top One adjustable wooden shelf in each 1219-040 Entertainment Center 56-1/2W 25-1/2D 42-1/2H Two sections Interior Dimensions of each: 26W 22D 36H Finished top One adjustable wooden shelf in each Left to Right: (1) 1235-000 Corner Unit (1) 1214-020 Four Drawer Base (1) 1226-020 Glass (1) 1218-010 Entertainment Center (1) 1214-020 Four Drawer Base (1) 1226-020 Glass (1) 1235-000 Corner Unit Shown above in Champagne Finish Wire management access areas Note Because of top moulding overhang, allow an additional 6 inches to overall configuration width. Also, when specifying units with different overall heights, allow an additional 4" depth for moulding clearance. Perfect Fit Custom Wall Systems / CLASSIC CHERRY COLLECTION 79
standard components Example #2 Left to Right: (1) 1235-000 Corner Unit (1) 1214-020 Four Drawer Base (1) 1226-030 Glass (1) 1218-010 Entertainment Center (1) 1214-020 Four Drawer Base (1) 1226-030 Glass (1) 1235-000 Corner Unit With special contemporary hardware Please refer to page 83 for standard Wire Management Access Areas. Shown above in Mystic Finish Note Because of top moulding overhang, allow an additional 6 inches to overall configuration width. Also, when specifying units with different overall heights, allow an additional 4" depth for moulding clearance. 16" 36" 55" 36" 16" 16" 24" 16" 80 CLASSIC CHERRY COLLECTION / Perfect Fit Custom Wall Systems
custom components Perfect Fit Custom Wall Systems / CLASSIC CHERRY COLLECTION 81
CUSTOM options custom options available Entertainment Centers sized to fit any TV / screen (max 60" width) speaker-cloth doorfronts remote infrared sensor base only with finished top Bar Units refrigeration Shown at right are the most commonly requested special options. If you require additional options, please contact us and we'll be happy to create a plan to meet your specific needs. Top Units bi-fold doors sliding doors pocket doors seeded glass doors antique mirror doors wire-front doors standard & custom mullion doors shelf options - glass - wood dimension change Base Units finished top surface - 3/4" square edge wood top - 1" traditional edge wood top change drawer style dimension change Special Options remote infrared sensors locking systems -decorative -cylinder surge protector 82 CLASSIC CHERRY COLLECTION / Perfect Fit Custom Wall Systems
how to order Electronic and Digital Components Checklist Wide-screen TV Home Theater Screen TV DVD player Home Entertainment System Cable / Satelite Box Speakers External surge power unit Wireless networking hub Docking Station Amplifier Tuner Receiver Additional components? Please itemize and supply dimensions CUSTOM WALL SYSTEM 1. FLOOR PLAN Provide room plan showing where wall system is to be placed remember to show doors, windows and ceiling height 2. DETAILED DRAWING Indicate the overall size of the system and what type of cabinets are required (i.e. entertainment, bar, desk, etc.) 3. DIMENSIONS If possible, we will use the components shown in the standard section and change as necessary to customize your system. Show how the individual units will be laid out. If the component isn t shown in the standard section, give description and size of the unit you require, and we will custom build. 4. UNIQUE SPECIFICATIONS Let us know your request for special options (see list of examples offered on page 86). We are able to provide many custom features. 5. FINISH CHOICE Choose your finish from the 36+ Harden finishes, or if you'd like, choose a custom finish option (provide sample, or additional information for match) 6. HARDWARE SELECTION Select hardware from our options available (shown on page 91) or use one of your own selections. Please provide sample(s) if you will be supplying the hardware. QUICKQUOTE Program Although some complex specifications may require more time, Harden s QuickQuote program guarantees that most project quotes are calculated and delivered the same day. Email perfectfit@ harden.com with all the information noted above, including dimensions and digital sketches, and receive a detailed quote for your custom project. Perfect Fit Custom Wall Systems / CLASSIC CHERRY COLLECTION 83
custom components Example #3 84 CLASSIC CHERRY COLLECTION / Perfect Fit Custom Wall Systems
examples: ENTERTAINMENT COMPONENT BAR UNIT COMPONENT SAMPLE CONFIGURATION * * listed left to right 1 1225-030 Glass 1 1211-020 Three Drawer Base 1 1216-010 Entertainment Ctr 1 1225-030 Glass 1 1211-020 Three Drawer Base 1 1234-000 Corner Unit 2 1225-010 Wood SPECIAL: Size to be 25W x 16D x 23-1/2H Open space Grommets for wiring Surge protection End panels to accommodate fabric back & task lighting Open writing surface with end panels for support 1 1226-031 Bar Unit 1 1212-000 Open Base SPECIAL: Grommets for wiring Surge protection 5 ft. desk runoff Reverse mold to 1212-000 w/ right side facing pedestal Leather insert on desk runoff Keypad pull-out to be centered over kneewell with leather insert File drawer on runoff end Custom Options: Leather/Nailhead on All Flat Door Panels - Leather Panels - Small Rustic Nail Head Seeded Glass Doors Cabinetmaker's Cherry hardware: - 1629 Door Pulls (vertical) - 1613 Drawer Pulls - Silver option Shown in Spring Creek Finish Note Because of top moulding overhang, allow an additional 6 inches to overall configuration width. Also, when specifying units with different overall heights, allow an additional 4" depth for moulding clearance. CLASSIC CHERRY COLLECTION / Perfect Fit Custom Wall Systems 85
CUSTOM options Example #4 86 CLASSIC CHERRY COLLECTION / Perfect Fit Custom Wall Systems
examples: SAMPLE CONFIGURATION * * listed left to right 1 1213-010 Wood Door Base 1 1225-020 Mullioned 1 1218-010 Entertainment Center 1 1213-010 Wood Door Base 1 1225-020 Mullioned 1 1235-000 Corner Unit 1 1226-011 Wood SPECIAL: No doors 1 1214-010 Wood Door Base Custom Options: Custom P-top 108L x 36W Custom Column Base 42H Custom Panel Base Shown in Old Tavern Finish Note Because of top moulding overhang, allow an additional 6 inches to overall configuration width. Also, when specifying units with different overall heights, allow an additional 4" depth for moulding clearance. Perfect Fit Custom Wall Systems / CLASSIC CHERRY COLLECTION 87
finishes Standard Finishes Harden s standard solid wood finishes offer the designer variations in color, sheen, and physical characteristics ranging from classic, full-filled lacquer to rustic, hand-planed selections. Custom Match Harden will custom match finish to any existing furniture and/or color chip. The process is easy... 1. Supply a sample of finish to be matched 2. Our finishing specialists will formulate a matching finish 3. A sample panel will be submitted for your approval 4. After approval, the formula will be kept on record in the event it s needed on another project. Specialty Finishes HAND-PAINTED FINISHES A number of hand-painted finishes have been developed, each with its own unique chracteristics Tarnished Hardware is standard Physical Distressing is unique to each finish please refer to actual finish panel for best representation. DECORATIVE FINISHES Our decorative finishes feature multiple layers of color, often in combination with unique highlights and textures Painted Hardware is standard Physical Distressing is unique to each finish please refer to actual finish panel for best representation. Additional charges are applied for these special applications Combination Finishes Just supply a sketch/drawing indicating desired finish on each piece. Physical distressing is standard on some finishes please indicate if you would like standard sheen and/or distressing or other options. If you would like help with your finish selection, please refer to the latest Harden Finish Brochure or contact your customer service representative or refer to our website www.harden.com for the most current, detailed finish information NOTE: Please refer to actual finish panels for the most accurate finish representations. 88 CLASSIC CHERRY COLLECTION