AU5800 Job Aid Booklet For Training Purposes Only These job aids are shortened versions of procedures found in the references below. Information in the job aid is correct as of the date published. Verify you have the correct information. References: AU5800 Chemistry Analyzer User s Guide PN A98352AB (October 2012) AU5800 Chemistry Analyzer Quick Response Guide PN B00418AB (October 2012) AU5800, Customer, Job Aid Booklet Page 1 of 31
AU5800 Chemistry Analyzer WARNINGS AND PRECAUTIONS Read all product manuals and consult with Beckman Coulter-trained personnel before attempting to operate the instrument. Beckman Coulter, Inc. urges its customers and employees to comply with all national health and safety standards such as the use of barrier protection. This may include, but is not limited to, protective eyewear, gloves, suitable laboratory attire when operating or maintaining this or any other automated laboratory equipment. INTENTION FOR USE This document is not intended to replace the information in your User s Guide or Quick Response Guide. Information in the User s Guide and Quick Response Guide supersedes information in any other manual. REVISION STATUS Based on AU5800 software version 4.21 TRADEMARKS AU5800 Chemistry Analyzer AU5800, Customer, Job Aid Booklet Page 2 of 31
Table of Contents Set the Start Condition... 5 Check and Load Reagents... 6 Load a Fixed (Assigned) Reagent... 7 Perform Analyzer Calibration... 8 Perform Quality Controls for All Tests... 9 Perform Quality Control for Selected Tests... 10 Manual Programming for Samples on Racks... 11 Perform Add On and Rerun Tests on Racks... 12 Recall Patient Results... 13 Print RB/CAL/QC Reports... 14 Transfer Data to Host... 15 Calibration Verification... 16 Review and Print QC... 18 Delete QC Data and Enter Comments... 19 Set Calibrator Lot Concentrations... 20 Configure New QC Lot Parameters... 21 Daily Analyzer Maintenance... 22 Load ISE Reagents (ISE Option only)... 24 Perform ISE Clean (ISE Option only)... 25 Perform ISE Calibration (ISE Option only)... 26 Define a User Menu... 27 Save or Load System Parameters... 28 Save Data to External Media... 29 Perform an End Process... 30 Perform and Recover from an Emergency Stop... 31 AU5800, Customer, Job Aid Booklet Page 3 of 31
AU5800, Customer, Job Aid Booklet Page 4 of 31
Set the Start Condition AU5800, Customer, Job Aid Booklet Page 5 of 31
Check and Load Reagents AU5800, Customer, Job Aid Booklet Page 6 of 31
Load a Fixed (Assigned) Reagent AU5800, Customer, Job Aid Booklet Page 7 of 31
Perform Analyzer Calibration AU5800, Customer, Job Aid Booklet Page 8 of 31
Perform Quality Controls for All Tests AU5800, Customer, Job Aid Booklet Page 9 of 31
Perform Quality Control for Selected Tests AU5800, Customer, Job Aid Booklet Page 10 of 31
Manual Programming for Samples on Racks AU5800, Customer, Job Aid Booklet Page 11 of 31
Perform Add On and Rerun Tests on Racks AU5800, Customer, Job Aid Booklet Page 12 of 31
Recall Patient Results AU5800, Customer, Job Aid Booklet Page 13 of 31
Print RB/CAL/QC Reports AU5800, Customer, Job Aid Booklet Page 14 of 31
Transfer Data to Host AU5800, Customer, Job Aid Booklet Page 15 of 31
Calibration Verification AU5800, Customer, Job Aid Booklet Page 16 of 31
Calibration Verification, continued AU5800, Customer, Job Aid Booklet Page 17 of 31
Review and Print QC AU5800, Customer, Job Aid Booklet Page 18 of 31
Delete QC Data and Enter Comments AU5800, Customer, Job Aid Booklet Page 19 of 31
Set Calibrator Lot Concentrations AU5800, Customer, Job Aid Booklet Page 20 of 31
Configure New QC Lot Parameters AU5800, Customer, Job Aid Booklet Page 21 of 31
Daily Analyzer Maintenance AU5800, Customer, Job Aid Booklet Page 22 of 31
Daily Maintenance, continued AU5800, Customer, Job Aid Booklet Page 23 of 31
Load ISE Reagents (ISE Option only) AU5800, Customer, Job Aid Booklet Page 24 of 31
Perform ISE Clean (ISE Option only) AU5800, Customer, Job Aid Booklet Page 25 of 31
Perform ISE Calibration (ISE Option only) AU5800, Customer, Job Aid Booklet Page 26 of 31
Define a User Menu AU5800, Customer, Job Aid Booklet Page 27 of 31
Save or Load System Parameters AU5800, Customer, Job Aid Booklet Page 28 of 31
Save Data to External Media AU5800, Customer, Job Aid Booklet Page 29 of 31
Perform an End Process AU5800, Customer, Job Aid Booklet Page 30 of 31
Perform and Recover from an Emergency Stop AU5800, Customer, Job Aid Booklet Page 31 of 31