Data Sheet Part Number :
Introduction Part Number : Compact Power Lighting Source Features Package: Au plated 2 pad design package with silicone resin View Angle : 120 Typical color temperature : 5500K Optical efficiency : 55lm/W Precondition : JEDEC Level 2a ESD Withstanding Voltage : up to ±2kV [HBM] Applications traffic lights back lighting (LCD, switches, keys, displays, illuminated advertising) interior and exterior automotive lighting substitution of micro incandescent lamps marker lights (e.g. steps, exit ways, etc.) signal and symbol luminaire Environmental Compliance Samsung is compliant to the restrictions of hazardous substances in electronic equipment, namely, the RoHS, ELV, ISO14001 and REACH directives. Samsung will not intentionally supplement the restricted materials to the LED product: Cd,Pb,Hg,PBBs,PBDEs and Cr 6+ - 1 -
Table of Contents Part Number Description ------------------------ 3 Characteristic ------------------------ 4 Typical Characteristic ------------------------ 4 Luminous intensity Bin ------------------------ 4 Forward Voltage Bin ------------------------ 4 Color Bin Definition ------------------------ 5 Absolute Maximum Rating ------------------------ 6 Typical Characteristic Graph ------------------------ 7 Mechanical Dimension ------------------------ 12 Soldering Condition ------------------------ 13 Package Information ------------------------ 14 Product Labeling Information ------------------------ 16 Reliability Test Condition ------------------------ 17 Precaution ------------------------ 18 Revision History ------------------------ 20 Company Information ------------------------ 20-2 -
Part Number Description The Part number designation is explained as follows : SP M WH T3235A3XC M0 SA AB C DE F GHI JKLMN OP QR Where: AB - designates company name and Samsung LED PKG (SP for Samsung LED PKG) C - designates power variant (M for automotive Middle Power) DE - designates color variant (WH for automotive White and single color) F - designates LED PKG version (value T for initial version) GHI - designates product configuration and type J - designates operating condition (value 5 for 50mA) K - designates specific property L - designates CRI variant (value 3 for CRI Min. 70) MN - designates forward voltage property OP - designates CIE coordination property QR - designates luminous intensity property - 3 -
Characteristics Typical Characteristics [T j =25 ] [1] Parameter Symbol Value Unit Luminous Flux (I F = 50mA) Φ V 9.0 lm Forward Voltage (I F = 50mA) V F 3.1 V Viewing Angle φ 120 Deg. Thermal Resistance (Junction to solder point) R th_js 70 K/W Luminous Intensity Bin [2] Symbol Condition Bin Code [T j =25 ] [1] Luminous Intensity Luminous Flux [2] I V [cd] Φ V [lm] Min. Max. Min. Max. I V, Φ V I F = 50mA A1 2.0 3.0 6.0 9.0 A2 3.0 4.0 9.0 12.0 Forward Voltage Bin [2] [T j =25 ] [1] Symbol Condition Bin Code Min. Typ. Max. Unit C1 2.7-3.0 V F I F = 50mA C2 3.0-3.3 V C3 3.3-3.6 * Note 1] Measurement condition : LED(T J)=Ambient temperature(t A), by applying pulse current for under 25 ms. [2] Luminous intensity measuring equipment : CAS140CT I V and V F tolerances are ±10% and ±0.1 V, respectively. [3] Luminous flux value is just reference purposes. LED are sorted by the value of luminous intensity. - 4 -
Color Bin Definition [4] Symbol Condition Bin Code Cx Cy MZ 0.3115 0.3205 0.3197 0.3100 0.2837 0.2956 0.3131 0.2990 M1 0.3197 0.3288 0.3288 0.3205 0.3131 0.3282 0.3081 0.2956 Cx, Cy I F =50mA M2 0.3288 0.3288 0.3386 0.3386 0.3081 0.3282 0.3426 0.3235 M3 0.3386 0.3386 0.3484 0.3484 0.3235 0.3426 0.3571 0.3388 M4 0.3484 0.3484 0.3582 0.3582 0.3388 0.3571 0.3715 0.3542 * Note [4] Chromaticity coordinates : Cx,CyaccordingtoCIE1931. Cx and Cy tolerances are ±0.01, respectively. - 5 -
Absolute Maximum Ratings Parameter Symbol Value Unit Operating temperature range T opr -40 ~ 110 Storage temperature range T stg -40 ~ 110 I 10 ma Junction temperature T jmax 125 Maximum forward current [5] I F 70 ma (T c : 25 ) [6] Minimum forward current [5] (T c : 25 ) [6] F Maximum peaked current (T c : 25 ) [6] I FM 100 ma Reverse voltage (T c : 25 ) [6] V R 5 V Thermal resistance (Junction to soldering point) R thj-s 70 K/W Power consumption (T c : 25 ) [6] P tot 180 mw ESD Sensitivity (HBM) - ±2 kv * Notes [5] Unpredictable performance may be resulted by driving the product at below Min. I F or above Max. I F. But there will be no damage to the product. [6] The measurement condition means that temperature dependence is excluded by applying pulse current for under 25 ms. - 6 -
Typical Characteristics Graph Typical Spectrum : I F = 50mA, T c = 25 C [6] Chromaticity Coordinate Shift vs Angle : I F =50mA, T c = 25 C [6] - 7 -
Relative Luminous Intensity & Forward Voltage vs Forward Current : T c = 25 C [6] Forward Voltage[V] Chromaticity Coordinate Shift vs Forward Current : Reference point_i F =50mA, T c = 25 C [6] - 8 -
Relative Luminous Intensity & Shift Forward Voltage vs Temperature : Reference point_25, I F =50mA Chromaticity Coordinate Shift vs Temperature : Reference point_25, I F =50mA - 9 -
Typical Radiant Pattern : I F =50mA, T c = 25 C Max. Permissible Forward Current : I F =f(t c ) - 10 -
Expectation Life Time Operating Condition B50L80 [7] B3L80 50mA, T c = 25 C 190,000 80,000 70mA, T c = 25 C 100,000 40,000 70mA, T c = 85 C 19,000 8,000 NOTE [7] Lifetime shown is an estimation of expected lifetimes (Bxx, Lyy) is computed as 90% lower confidence limit of the Samsung Led's product as a function of drive current and case temperature. The lifetime estimates in the above table reflect statistical figures based on calculations of technical data and are subject to change. - 11 -
Mechanical Dimension [8] 2 Cathode mark 1 * Note [8] Unit : mm, Tolerance : ±0.10mm Do not place pressure on the encapsulating resin (hatch area) The maximum compressing force is 15N on the polymer Electric Schematic Diagram 2 1-12 -
Soldering Conditions Pad Configuration & Solder Pad Layout [9] * Note [9] Unit : mm, Tolerance : ±0.10mm Reflow Soldering Condition (Pb Free) Reflow Frequency : 2 times max. Manual Soldering Condition Not more than 5 seconds @MAX300, under soldering iron.(one time only) - 13 -
Packing Information Taping [10] A B C D E F 4.00 ±0.1 4.00 ±0.1 2.00 ±0.05 1.75 ±0.1 3.50 ±0.05 8.00 +0.3 * Note [10] Unit : mm, Cumulative tolerance/10 pitches to be ±0.2mm LED taping quantity : 2,000EA / Reel. Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10 angle to be the carrier tape. -0.1 Reel [11] A B C W1 W2 180.0-3.0 5.70 ±0.2 9.0 ±0.3 13.0 ±0.5 11.4 ±1.0 [11] Unit : mm - 14 -
Packing Box information Dimension of Transportation Box in mm Width Length Height 220 245 182-15 -
Product Labeling Information Label Information ABCDEF SPMWHT3235A3 ABCDEF XXXX IIIIIIIIIIIIIIIIIIIIIIIIIIII 123456789 / 1abc / 1,000 PCS IIIIIIIIIIIIIIIIIIIIIIIII Bin Code Part Number Lot Number 1. Bin Code AB : Forward Voltage(V F ) Bin CD : Chromaticity Coordinate Bin EF : Luminous Flux(Φ V ) Bin 2. Lot No. 123456789 / 1abc / 2,000 PCS 1 : Production Site (S:SAMSUNG KOREA, G:TIANJIN CHINA) 2 :L(LED) : Product State (A:Normality, B:Bulk, C:First Production, R:Reproduction, 3 S:Sample) 4 : Year (X:2013, Y:2014, Z:2015...) 5 : Month (1 ~ 9, A, B, C) 6 : Day (1 ~ 9, A, B ~ V) 789 : SAMSUNG ELECTRONICS Product number (1 ~ 999) abc : Reel Number (1 ~ 999) - 16 -
Reliability Test Conditions For detailed Information please contact your SAMSUNG Sales partner - 17 -
Precaution for Use 1) For over-current-proof function, customers are recommended to apply resistors to prevent sudden change of the current caused by slight shift of the voltage. 2) This device should not be used in any type of fluid such as water, oil, organic solvent, etc. When washing is required, IPA is recommended to use. 3) When the LEDs illuminate, operating current should be decided after considering the ambient maximum temperature. 4) LEDs must be stored in a clean environment. If the LEDs are to be stored for 3 months or more after being shipped from Samsung Electronics, they should be packed by a sealed container with nitrogen gas injected.(shelf life of sealed bags: 12 months, temp. ~40, ~90%RH) 5) After storage bag is open, device subjected to soldering, solder reflow, or other high temperature processes must be: a. Mounted within 672 hours (28 days) at an assembly line with a condition of no more than 30 /60 %RH, b. Stored at <10 %RH. 6) Repack unused Products with anti-moisture packing, fold to close any opening and then store in a dry place. 7) Devices require baking before mounting, if humidity card reading is >60 % at 23±5. 8) Devices must be baked for 1 hour at 65±5, ifbaking is required. 9) The LEDs are sensitive to the static electricity and surge. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. If voltage exceeding the absolute maximum rating is applied to LEDs, it may cause damage or even destruction to LED devices. Damaged LEDs may show some unusual characteristics such as increase in leak current, lowered turn-on voltage, or abnormal lighting of LEDs at low current. - 18 -
10) VOCs (volatile organic compounds) may be occurred by adhesives, flux, hardener or organic additives which is used in luminaires (fixture) and LED silicone bags are permeable to it. It may lead a discoloration when LED expose to heat or light. This phenomenon can give a significant loss of light emitted (output) from the luminaires (fixtures). In order to prevent these problems, we recommend you to know the physical properties for the materials used in luminaires, It requires to select carefully. - 19 -
Revision History Date Revision History Author Drawn Approved 2010.12.31 Initial Edition - Preliminary W.H Jung Y.H. Song 2012.10.08 Specification format change J.C. Kang S.H. Lee 2013.02.15 Precaution Revision J.C. Kang S.H. Lee 2013.10.10 Color Bin Definition addition J.C. Kang S.H. Lee Company Information US Samsung Semiconductor Inc., 3655 N. First Street, San Jose CA 95134, USA TEL. +1-408-544-4000 Europe Samsung Electronics Germany GmbH, Samsung House, Am Kronberger Hang 6, Schwalbach/Ts,Germany TEL. +49-6196-66-0 Copyright @1995-2013 All rights reserved Samsung Electronics San #24, Nongseo-Dong, Giheung-Gu, Yongin-City, Gyeongii-Do 446-711 Korea http://www.samsung.com/sec/business/# Sales Contact : em.yeon@samsung.com Japan Samsung Japan Corporation SLED Team 10F, Shinagawa Grand Central Tower 2-16-4, Kounan, Minato-ku, Tokyo 108-8240, Japan TEL. +81-3-6369-6327 China (Tianjin Office in China) Tianjin Samsung LED Co., LTD. Weisi (6th) Rd., Micro-Electronics Industrial Park, Xiqing District, Tianjin 300385, China TEL. +86-755-8608-5550 - 20 -