Artem Korobenko. Research Interests. Education. Scholarships, Honors and Awards. Curriculum Vitae

Similar documents
Alice Alipour CV - Page 1 of 5

Master in Wind Energy

Megan P. O Connor, Ph.D.

THE DEPARTMENT OF STRUCTURAL ENGINEERING

Universitat Politècnica de Catalunya. BarcelonaTech 2017/18

Sandia Blade Design Tools: NuMAD Overview

Supply Chain Management; Capacity and Inventory Planning; Electricity Markets; Healthcare Analytics.

Interference of Wind Turbines with Different Yaw Angles of the Upstream Wind Turbine

MIN Z. CARTER. Master of Business Administration (December 2002) Troy State University, Troy, Alabama

Probabilistic Methodology For Life Prediction of Aircraft Turbine Rotors

Aerodynamic Design of 2.5 MW Horizontal Wind Turbine Blade in Combination with CFD Analysis

ZHOU, CAIZHI EDUCATION RESEARCH INTERESTS EXPERIENCE

CFD Analysis of Pelton Runner

An Experimental Study of Advance Hybrid Savonius With Arm Gear Based Structure For Electric Power Generation

Three-Dimensional Numerical Simulation of a Model Wind Turbine

Numerical Investigation of Bare and Ducted Horizontal Axis Marine Current Turbines

Alex Scott Purdue University, B.S., Industrial Engineering, West Lafayette, IN

EDUCATION Ph.D. Sustainability September 2007 May 2011

TurboMachinery Research Group - TMR Dipartimento di Meccanica e Aeronautica - URLS

School of Management & Labor Relations, Rutgers University, Piscataway, NJ Assistant Professor, Human Resource Management

DIRECTORATE FOR FUEL AND ENERGY SECTOR. Development of Wind Energy Technology in the World

Structural design of spars for 100-m biplane wind turbine blades

JIP on Coupled analyses of FOWTs

Wind Turbine Engineering R&D

Benjamin John Davis. Assistant Professor The Cooper Union for the Advancement of Science and Art (New York, NY)

CIVIL, CONSTRUCTION, AND ENVIRONMENTAL ENGINEERING

Wind Turbines Design

Wind Effects on Buildings and Urban Environment

CURRICULUM VITAE. 4. Sutley, E.J., J.W. van de Lindt, and L. Peek, (2016). Community-Level Framework for Seismic

BASHAR ALSMADI. Mobile : (962) OR

Curriculum Vitae (June 2013) Zhiqing Zhou. Department of Psychology, University of South Florida Phone: /

FSI ANALYSIS OF TRAILING EDGE REGION COOLING IN HP STAGE TURBINE BLADE

Dr. Kathrin Menberg. Telephone (office): (office):

Performance-Based Design of Wood Shearwalls Considering Performance of the Overall Structure

Project 4.23: Powertrain Thermal Management Strategies Based on Active Monitoring and Control PI: Ma (Virginia Tech)

JRC SJTU/NTNU Milestones and future activities. Professor Olav B. Fosso Director, Strategic Research Area Energy

CFD/FEM Based Analysis Framework for Wind Effects on Tall Buildings in Urban Areas

Derivation of Global Parametric Performance of Mixed Flow Hydraulic Turbine Using CFD. Ruchi Khare, Vishnu Prasad and Sushil Kumar

Advanced Gas Turbine Concept, Design and Evaluation Methodology. Preliminary Design of Highly Loaded Low Pressure Gas Turbine of Aircraft Engine

Proceedings of Meetings on Acoustics

Maria B. Gondo, Ph.D.

Bachelor of Science in Psychology (Honors) May 2001 Minor: Business Administration University of Florida, Gainesville, FL

AERO-DESIGN ANALYSIS FOR MODIFIED DARRIEUS BASED- STRAIGHT BLADED VAWT SYSTEMS

Jonathan A. Dantzig. Ph.D., Mechanics and Materials Science, The Johns Hopkins University, M.S.E., Mechanics, The Johns Hopkins University, 1975

Wind energy research in Denmark: International cooperation

Faculty Development. Measures of Success and How to Attain Them

Department of Aerospace Engineering Indian Institute of Technology, Kanpur. Placement Brochure

Curriculum Vitae Natalia Giugni Vidal. Anderson School of Management University of New Mexico 1924 Las Lomas NE Albuquerque, NM 87106

Renewable Energy. Visible light. Cool air. Warm air. Condensation. Precipitation. Evaporation

Associate Professor of Marketing and Statistics Smeal College of Business The Pennsylvania State University October 22, 2004

Aerodynamic Performance Sensitivity Analysis of Blade Design for a 100 kw HAWT

Sheng (Monica) Wang. The Ohio State University Major Human Resource Management/Organizational Behavior Minor Quantitative Psychology

Introduction to Department of Mechanical Engineering

The DTU 10MW Reference Wind Turbine

CFD Analysis of a Low Head Propeller Turbine with Comparison to Experimental Data By: Artem Ivashchenko, Mechanical Solutions, Inc.

THIN-WALLED components have an increasingly

GENARO J. GUTIERREZ (512)

TEMPERATURE STRATIFICATION OF CIRCULAR BOREHOLE THERMAL ENERGY STORAGES

HA THU LE. Biography EDUCATION

BRUCE EDWARD FOX. Professor of Forest Management P.O. Box Northern Arizona University Flagstaff, AZ

An Overview of the Transportation Research Board

Experimental study on horizontal axis wind turbine with splitted winglets

College of Science and Engineering. Project Title: Development of a High-Resolution Virtual Wind Simulator for Optimal Design of Wind Energy Projects

NANO TECHNOLOGY AND MATERIAL SCIENCE EXPO Propel New Technologies by Integrating Nanoscience and Material structures

Energy Resources and Policy Handout: Wind power

SIMULATION AND PIV EXPERIMENT OF THE DUCTED WATER CURRENT TURBINE AND EXTREMELY LOW HEAD HELICAL TURBINE

GAMZE ARMAN

Department of Electrical and Computer Engineering Michigan Technological University 1400 Townsend Drive Houghton, MI 49931

Effect of Rotation Speed of a Rotary Thermal Wheel on Ventilation Supply Rates of Wind Tower System

Andrew McGowan Ph.D. Candidate NSF IGERT Fellow

Tingting Yan. Associate Professor (with tenure) Department of Marketing & Supply Chain Management 317 Prentis Building

Hyun Woo Chris Lee, Ph.D.

Contact Pressure Analysis of Steam Turbine Casing

CFD Analysis of Domestic Centrifugal Pump for Performance Enhancement

A305 Bourns Hall, University of California, Riverside, Riverside Phone: (951)

CURRICULLUM VITAE Dr. John Ngubiri

CURRICURUM VITAE DAE HUN CHUNG, PH.D.

CURRICULUM VITAE BASHARAT JAMIL

Numerical Study of Atmospheric Ice Accretion on Wind Turbines

Project Title: Development of a High-Resolution Virtual Wind Simulator for Optimal Design of Wind Energy Projects

MAJOR ACADEMIC QUALIFICATIONS

Alexandre Jacquillat

COMPUTATIONAL AND EXPERIMENTAL STUDY OF OPTIMAL DESIGN ON HYBRID VERTICAL AXIS WIND TURBINE

DEPARTMENT OF INDUSTRIAL ENGINEERING Padova - Italy

ROBERTO TARTAGLIA CURRICULUM VITAE. 64 Raffaello Road, Naples, Italy, ph mobile

Kassahun Melesse Curriculum Vitae 2 of 5. Urban Agriculture in Ethiopia: The Case of Addis Ababa, Senior Essay, Addis Ababa University, 2000

Modelling Wind Turbine Inflow:

Ontwerpsoftware voor windenergietoepassingen

FINITE ELEMENT ANALYSIS SIMULATION FOR MILITARY TRAINING TECHNOLOGY DESIGN OPTIMIZATION

Elise Chandon Ince July 2017

Complete Course List Taught Courses

DENISE M. KEELE, Ph.D.

Stress Analysis and Weight Optimization of a Wing Box Structure Subjected To Flight Loads

Design and Fabrication of Darrieus Wind Turbine with Static Stress Analysis of Rotor & its Structures

HONGJOO WOO, Ph.D. Assistant Professor

The Aerospace Industry Steering Committee on Structural Health Monitoring and Management (AISC-SHM): Progress on SHM guidelines for aerospace.

PhD Dissertation Title: A mathematical programming life-cycle assessment model for solid waste management decision making

Hydroelectric Power. Renewable Energy Sources

بسم ا... النور. In the Name of Allah

CONCEPTUAL DESIGN OF A VTOL REMOTELY PILOTED AIRCRAFT FOR EMERGENCY MISSIONS

Transcription:

Artem Korobenko Curriculum Vitae Assistant Professor Phone: 864-650-6943 Department of Mechanical and Manufacturing Email: artem.korobenko@ucalgary.edu Engineering Website: www.korobenkocfsm.com University of Calgary, 40 Research Place NW, Calgary, Alberta, Canada T2L 1Y6 Research Interests Education Computational Mechanics Finite Element Methods (FEM) and Isogeometric Analysis (IGA) Computational Fluid Dynamics (CFD) and Fluid-Structure Interaction (FSI) Wind Turbine Applications Aerospace Engineering Offshore and Marine Engineering Turbulence Modeling and Computations Damage in Composite Materials 08/2011-12/2014 University of California, San Diego, La Jolla, CA, USA Ph.D., Structural Engineering Department/Computational Science, Mathematics and Engineering Program (CSME) Dissertation: Advanced FSI Techniques in Application to Horizontal and Vertical Axis Wind Turbines 08/2009-05/2011 Clemson University, Clemson, SC, USA M.Sc., Mechanical Engineering Department Thesis: Computational Analysis of the Dynamic Forces on the Rotor of an Offshore Wind Turbine 09/2004-06/2009 National Aerospace University Kharkov Aviation Institute, Kharkov, Ukraine B.Eng., Department of Aircraft Engines Graduation with honors: June 2008 Thesis: The Design of Gas-Turbine Driven with Heat Regenerator Scholarships, Honors and Awards September, 2016 Nominee for 2016 UCSD Chancellor s Postdoctoral Scholar Award

September, 2015 September, 2015 January, 2014 July, 2013 Nominee from Structural Engineering Department for 2015 UCSD Chancellor s Dissertation Medal Finalist for an oral presentation at Postdoctoral Research Symposium (PDA 2015) at University of California San Diego. IGA 2014: Integrating Design and Analysis, Poster Competition Award 12th U.S. National Congress on Computational Mechanics Travel Award 2011-2012 Graduate Research Fellowship, Structural Engineering Department, University of California, San Diego, La Jolla, CA, USA. 2009-2011 Fulbright Graduate Student Program, Mechanical Engineering Department, Clemson University, Clemson, SC, USA. 2004-2009 Ukrainian State Scholarship to complete Bachelor s Program, National Aerospace University Kharkov Aviation Institute, Kharkov, Ukraine. Academic Experience October 2016 present January 2015 October 2016 University of Calgary, Calgary, Alberta, Canada Assistant Professor, Department of Mechanical and Manufacturing Engineering University of California, San Diego, La Jolla, CA, USA Postdoctoral Researcher, Structural Engineering Department Supervisor: Prof. Yuri Bazilevs Courses Taught Winter 2017 ENER 350: Computing Tools for Energy Engineers" Professional Service Member of ASME since 2011 Scientific expert for Fulbright Graduate Student Program since 2012 External reviewer for Research Grant Council of Hong-Kong since 2015 Member of IACM since 2015 Member of USACM since 2015 Member of EMI since 2015 Member of Computational Mechanics TC at EMI since 2016 Vice-chair for Committee on Fluid-Structure Interaction (CFSI) of the Applied Mechanics Division (AMD) of ASME since 2016

Chairmanship and Session Organization Journal Referee Refereed Journal Articles Main organizer of Mini-symposia Session Computational Fluid-Structure Interaction: Methods and Applications at 14 th US National Congress on Computational Mechanics (USNCCM14), July 17-20, 2017, Montréal, Québec, Canada. Co-organizer of Mini-symposia Session: Stabilized, Multiscale, and Isogeometric Methods in CFD at IACM 19 th International Conference on Finite Elements in Flow Problems (FEF 2017), April 5-7, 2017, Rome, Italy. Main organizer of Mini-symposia Session: Isogeometric Methods in Computational Mechanics at 2017 EMI Conference, June 4-7, 2017, San Diego, CA, USA. Co-organiser of Thematic Session: Industrial applications of IGA and Meshfree methods at 2016 USACM Conference on Isogeometric Analysis and Meshfree Methods to be held on October 10-12, 2016, La Jolla, CA, USA. Co-chair of Mini-symposia Session: Computational methods for solid and structural mechanics at 2015 Engineering Mechanics Institute (EMI) Conference of the American Society of Civil Engineers (ASCE), Stanford University, CA, USA, June 16-19, 2015. Computational Mechanics Computers & Fluids Mathematical Models and Methods in Applied Science ASME Journal of Applied Mechanics Experimental Techniques 14. J.Yan, Y.Bazilevs, A.Korobenko, A.Tejada-Martinez, R.Golshan A new multiscale residual-based turbulence modeling and LES simulations of stratified flows, 2016, Computers & Fluids, under review 13. A.Korobenko, J.Yan, S.M.I.Gohari, S.Sarkar, Y.Bazilevs FSI Simulations of Multiple Horizontal-Axis Wind Turbines Interacting with Atmospheric Boundary Layer Flow, 2016, in preparation 12. J.Yan, X.Deng, A.Korobenko, Y.Bazilevs Free-surface flow modeling and simulation of horizontal-axis tidal-stream turbines, Computers & Fluids, 2016, accepted, Available online: http://dx.doi.org/10.1016/j.compfluid.2016.06.016

11. Y.Bazilevs, A.Korobenko, X.Deng, J.Yan Dynamically-Coupled Fluid- Structure Interaction and Isogeometric Damage Model for Fatigue Prediction in Full-Scale Wind Turbines, Journal of Applied Mechanics, 2016, 83(6), 061010 DOI:10.1115/1.4033080 10. J.Yan, A.Korobenko, X.Deng, Y.Bazilevs Computational free-surface fluid-structure interaction with application to offshore floating wind turbines, Computers & Fluids, 2016, accepted, Available online: DOI:10.1016/j.compfluid.2016.03.008 9. J.Yan, B.Augier, A.Korobenko, J.Czarnowski, G.Ketterman, Y.Bazilevs FSI modeling of tandem compliant hydrofoils for kayak propulsion, Computers & Fluids, 2015, accepted, Available online: DOI:10.1016/j.compfluid.2015.07.013 8. Y.Bazilevs, X.Deng, A.Korobenko, F.Lanza di Scalea, S.G.Taylor, M.D.Todd Isogeometric Fatigue Damage Prediction in Large-Scale Composite Structures Driven by Dynamic Sensor Data, Journal of Applied Mechanics, 82(9), 2015, DOI: 10.1115/1.4030795 7. Y.Bazilevs, A.Korobenko, J.Yan, A.Pal, S.M.I.Gohari, S.Sarkar ALE- VMS Formulations for Stratified Turbulent Incompressible Flows with Applications, Mathematical Models and Methods in Applied Science, 25(12), 2015, DOI: 10.1142/S0218202515400114. 6. B.Augier, J.Yan, A.Korobenko, J.Czarnowski, G.Ketterman, Y.Bazilevs Experimental and numerical FSI study of compliant hydrofoils, Computational Mechanics, June 2015, Volume 55, Issue 6, pp 1079-1090, DOI:10.1007/s00466-014-1090-5 5. X.Deng, A.Korobenko, J.Yan and Y.Bazilevs Isogeometric Analysis of Continuum Damage in Rotation-Free Composite Shells, Computer Methods in Applied Mechanics and Engineering, 284, 349-372, 2015, DOI:10.1016/j.cma.2014.09.015 4. Y.Bazilevs, A.Korobenko, X.Deng, J.Yan, M.Kinzel, J.O.Dabiri FSI Modeling of Vertical- Axis Wind Turbines, Journal of Applied Mechanics, 81(8), 2014, DOI:10.1115/1.4027466 3. Y.Bazilevs, A.Korobenko, X.Deng, J.Yan Novel Structural Modeling and Mesh Moving Techniques for Advanced FSI Simulation of Wind Turbines, International Journal for Numerical Methods in Engineering, 102(3-4), 766-783, 2014, DOI: 10.1002nme.4738 2. A.Korobenko, M.-C.Hsu, I.Akkerman, Y.Bazilevs, Aerodynamic simulation of vertical-axis wind turbines, Journal of Applied Mechanics, 81(2), 021011, 2013, DOI: 10.1115/1.4024415

Book Chapters 1. A.Korobenko, M.-C.Hsu, I.Akkerman, J.Tippmann, Y.Bazilevs, Structural mechanics modeling and FSI simulation of wind turbines, Mathematical Models and Methods in Applied Science, 23, 249-272, 2013, DOI: 10.1142/S0218202513400034 (Highly cited paper) 1. A. Korobenko, X. Deng, J. Yan, Y. Bazilevs, Recent Advances in Fluid- Structure Interaction Simulations of Wind Turbines, in Advances in Computational Fluid-Structure Interaction and Flow Simulation, A Tribute to Tayfun Tezduyar on the Occasion of his 60th Birthday, edited by K. Takizawa and Y. Bazilevs, Springer, 2015. Selected Oral and Poster Presentation 22. Multiscale DDDAS Framework for Aerospace Composite Structures with Emphasis on Unmanned Aerial Vehicle, 1 st International Conference on InfoSymbiotics/DDDAS, Hartford, CT, USA, August 9-12, 2016. 21. Dynamic-Data-Driven Damage Prediction in Aerospace Composite Structures, AIAA Aviation Forum 2016, Washington, DC, USA, June 13-17, 2016. 20. Advances in Fluid-Structure Interaction Simulations of Wind Turbines, Aerospace and Offshore Structures, 2016 Engineering Mechanics Institute (EMI) Conference of the American Society of Civil Engineers (ASCE) and Probabilistic Mechanics & Reliability Conference, Vanderbilt University, TN, USA, May 22-25, 2016. 19. Advanced Computational Analysis of Wind Turbines, Danish Center for Applied Mathematics and Mechanics, Technical University of Denmark, Copenhagen, Denmark, May 19, 2016. 18. Advanced Computational Analysis for Energy Applications, Department of Mechanical and Manufacturing Engineering, University of Calgary, Calgary, Canada, April 19, 2016. 17. Advanced Computational Analysis of Aerospace Composite Structures, Department of Mechanical, Aerospace and Biomedical Engineering, University of Tennessee, Knoxville, Knoxville, TN, USA, April 15, 2016.

16. Aerodynamic Simulation of Multiple Horizontal-Axis Wind Turbines Interacting with Atmospheric Boundary Layer Flow, 10th Southern California Symposium on Flow Physics (SoCal Fluids X), University of California Irvine, Irvine, April 9, 2016. 15. Isogeometric Analysis of Thin Shell Structures: From Geometry Modeling to Fluid-Structure Interaction, Department of Marine Technology, NTNU, Trondheim, Norway, September 4, 2015. 14. Dynamically Coupled Fluid-Structure Interaction and Damage Model for Fatigue Prediction in Composite Structures, 13th U.S. National Congress on Computational Mechanics USNCCM13, San Diego, CA, USA, July 26-30, 2015. 13. Isogeometric Dynamic-Data-Driven Analysis of Fatigue Damage in Wind Turbine Blades, 2015 Engineering Mechanics Institute (EMI) Conference of the American Society of Civil Engineers (ASCE), Stanford University, CA, USA, June 16-19, 2015. 12. Computations of Atmospheric Boundary Layer Flow Interacting with Spinning Wind Turbine Rotor, 9th Southern California Symposium on Flow Physics (SoCal Fluids IX), San Diego State University, San Diego, April 18, 2015. 11. Computational Fluid-Structure Interaction with Emphasis on Wind Turbine Modeling, 2014 Engineering Mechanics Institute (EMI) Conference of the American Society of Civil Engineers (ASCE), Hamilton, ON, Canada, August 5-8, 2014. 10. Advances in Computational FSI Including Dynamically Data-Driven Simulations, Advances in Computational Fluid-Structure Interaction and Flow Simulation. A Conference Celebrating 60th Birthday of Tayfun E.Tezduyar, Tokyo, Japan, March 19-21, 2014. 9. Isogeometric Shell Modeling in Fluid-Structure Interaction Analysis of Wind Turbines, Poster presented at Isogeometric Analysis: Integrating Design and Analysis IGA2014, Austin, TX, USA, January 8-10, 2014. (Poster Competition Award) 8. Isogeometric Shell Modeling in Fluid-Structure Interaction Analysis of Wind Turbines, Isogeometric Analysis: Integrating Design and Analysis IGA2014, Austin, TX, USA, January 8-10, 2014.

Refereed Conference Proceedings and Abstracts 7. FSI Analysis of Wind Turbines at Full Scale, Poster presented at 12th U.S. National Congress on Computational Mechanics USNCCM12, Raleigh, NC, USA, July 22-25, 2013. 6. FSI Analysis of Vertical-Axis Wind Turbines (VAWT) at Full Scale, 12th U.S. National Congress on Computational Mechanics USNCCM12, Raleigh, NC, USA, July 22-25, 2013. (USNCCM12 Travel Award) 5. Dynamic Data-Driven Application System Framework for Large-Scale Composite Structures, International Conference on Computational Science (ICCS 2013), Barcelona, Spain, June 5-7, 2013. 4. FSI Analysis of Wind Turbines at Full Scale, Poster presented at the UCSD Jacobs School of Engineering 32rd Annual Research Expo, La Jolla, California, April 18, 2013. 3. Fluid-Structure Interaction Validation Study of Horizontal Axis Wind Turbine at Full Scale, 25th JSME Computational Mechanics Division Conference, Kobe, Japan, October 6-9, 2012. 2. Fluid Structure Interaction Analysis of Horizontal Axis Wind Turbines with Composite Blades and Spar Structures, 6th Southern California Symposium on Flow Physics (SoCal Fluids VI), University of California, Santa Barbara, CA, April 14, 2012. 1. Aerodynamics and Fluid-Structure Interaction Modeling of Wind Turbines, Poster presented at the UCSD Jacobs School of Engineering 31st Annual Research Expo, La Jolla, CA, April 12, 2012. 18. A.Korobenko, M.Pigazzini, V.Singh, H.Kim, D.Allaire, K.Willcox, A.L. Marsden, Y.Bazilevs Dynamic-Data-Driven Damage Prediction in Aerospace Composite Structures, AIAA Aviation Forum 2016 Conference Proceedings, DOI: 10.2514/6.2016-4126. 17. A.Korobenko, J.Yan, X.Deng, Y.Bazilevs Advances in Fluid-Structure Interaction Simulations of Wind Turbines, Aerospace and Offshore Structures, 2016 Engineering Mechanics Institute (EMI) Conference of the American Society of Civil Engineers (ASCE) and Probabilistic Mechanics & Reliability Conference, Vanderbilt University, TN, USA, May 22-25, 2016.

16. J.Yan, A.Korobenko, X.Deng, Y.Bazilevs Computational Free-Surface FSI with Applications, 2016 Engineering Mechanics Institute (EMI) Conference of the American Society of Civil Engineers (ASCE) and Probabilistic Mechanics & Reliability Conference, Vanderbilt University, TN, USA, May 22-25, 2016. 15. A.Korobenko, Y.Bazilevs, J.Yan, I.Gohari, S.Sarkar Aerodynamic Simulation of Multiple Horizontal-Axis Wind Turbines Interacting with Atmospheric Boundary Layer Flow, 10th Southern California Symposium on Flow Physics (SoCal Fluids X), University of California Irvine, Irvine, April 9, 2016. 14. J.Yan, X.Deng, A.Korobenko, Y.Bazilevs Free-surface Modeling of Tidal Stream Turbines, 10th Southern California Symposium on Flow Physics (SoCal Fluids X), University of California Irvine, Irvine, April 9, 2016. 13. A.Korobenko, X.Deng, J.Yan, Y.Bazilevs, Dynamically Coupled Fluid- Structure Interaction and Damage Model for Fatigue Prediction in Composite Structures, 13th U.S. National Congress on Computational Mechanics USNCCM13, San Diego, CA, USA, July 26-30, 2015. 12. J.Yan, A.Korobenko, X.Deng, Y.Bazilevs, Computational Free- Surface-Flow-Structure Interaction with Applications to Offshore Wind Turbines, 2015 Engineering Mechanics Institute (EMI) Conference of the American Society of Civil Engineers (ASCE), Stanford University, CA, USA, June 16-19, 2015. 11. A.Korobenko, X.Deng, J.Yan, Y.Bazilevs, Isogeometric Dynamic- Data-Driven Analysis of Fatigue Damage in Wind Turbine Blades, 2015 Engineering Mechanics Institute (EMI) Conference of the American Society of Civil Engineers (ASCE), Stanford University, CA, USA, June 16-19, 2015. 10. Y.Bazilevs, A.Korobenko, J.Yan, A.Pal, S.M.I.Gohari, S.Sarkar, Computations of Atmospheric Boundary Layer Flow Interacting with Spinning Wind Turbine Rotor, 9th Southern California Symposium on Flow Physics (SoCal Fluids IX), San Diego State University, San Diego, April 18, 2015. 9. X.Deng, A.Korobenko, J.Yan, Y.Bazilevs, Isogeometric Analysis of Progressive and Fatigue Failure with Application to Wind Turbine Blades, American Society for Composites 29 th Technical Conference 16 th US-Japan Conference on Composite Materials ASTM-D30 Meeting, La Jolla, CA, USA,

September 9-11, 2014. 8. A.Korobenko, Y.Bazilevs, Computational Fluid-Structure Interaction with Emphasis on Wind Turbine Modeling, 2014 Engineering Mechanics Institute (EMI) Conference of the American Society of Civil Engineers (ASCE), Hamilton, ON, Canada, August 5-8, 2014. 7. A.Korobenko, X.Deng, J.Yan, M.-C.Hsu, Y.Bazilevs, Advances in Computational FSI Including Dynamically Data-Driven Simulations, Advances in Computational Fluid-Structure Interaction and Flow Simulation. A Conference Celebrating 60th Birthday of Tayfun E.Tezduyar, Tokyo, Japan, March 19-21, 2014. 6. A.Korobenko, X.Deng, J.Yan, M.-C.Hsu, Y.Bazilevs, Isogeometric Shell Modeling in Fluid-Structure Interaction Analysis of Wind Turbines, Isogeometric Analysis: Integrating Design and Analysis IGA2014, Austin, TX, USA, January 8-10, 2014. 5. A.Korobenko, M.-C.Hsu, I.Akkerman, Y.Bazilevs, FSI Analysis of Vertical-Axis Wind Turbines (VAWT) at Full Scale, 12th U.S. National Congress on Computational Mechanics USNCCM12, Raleigh, North Carolina, July 22-25, 2013. 4. Y. Bazilevs, A.Korobenko, X.Deng, J.Tippman, and M.-C.Hsu, Wind Turbine Simulation: Structural Mechanics, FSI, and Computational Steering, 5 th International Conference on Coupled Problems in Science and Engineering, Ibiza, Spain, June 17-19, 2013. 3. Y.Bazilevs, M.-C.Hsu, M.T.Bement, A.Korobenko, Dynamic Data Driven Application System Framework for Large-Scale Composite Structures, International Conference on Computational Science (ICCS 2013), Barcelona, Spain, June 5-7, 2013. 2. A.Korobenko, M.-C.Hsu, I.Akkerman, Y.Bazilevs, Fluid-Structure Interaction Validation Study of Horizontal Axis Wind Turbine at Full Scale, 25th JSME Computational Mechanics Division Conference, Kobe, Japan, October 6-9, 2012. 1. A.Korobenko, M.-C.Hsu, I.Akkerman, Y.Bazilevs, Fluid Structure Interaction Analysis of Horizontal Axis Wind Turbines with Composite Blades and Spar Structures, 6th Southern California Symposium on Flow Physics (SoCal Fluids VI), University of California, Santa Barbara, California, April 14, 2011.