SPECIAL INSPECTION PROCEDURE IBC CHAPTER 17

Similar documents
AGREEMENT CONCERNING EXISTING AS BUILT CONSTRUCTION

Washoe County PLAN SUBMITTAL

Special Inspections Instructions

DEVELOPMENT SERVICES PO Box 1110 Tampa, FL Date: May 12, Interested Parties. John L. Barrios, CBO, Building Official

Inspection and Quality Assurance Requirements for Metal Plate Connected Wood Trusses. Educational Overview

Management. Construction. Development. WE PROVIDE A complete roster of building services to streamline the construction process

SECTION QUALITY REQUIREMENTS

STATEMENT OF SPECIAL INSPECTION FORM

Project Address: Name of Person Completing Form:

PROCEDURE FOR REQUESTING A BUILDING PERMIT

CITY OF GLASGOW BUILDING PERMIT APPLICATION 126 E. Public Square Glasgow, KY Phone: (270) Fax: (270)

APPLICATION FOR SOLAR PERMIT

Document A305 TM. Contractor's Qualification Statement

Dricon FRT Wood Specification

OWNER S AFFIDAVIT. I, certify that I am the owner of the property described as: ADDRESS: LOT: BLOCK: SUBDIVISION:

PERMITS, ADDRESSES, AND INSPECTIONS

Questions and Answers about Madison Crescent and Noise Issues

BUILDING CODES & DESIGN CRITERIA

Sub-Contractor/Supplier Pre-Qualification Questionnaire

Commercial and/or Residential Permit Forms

SUPPLIER QUALITY REQUIREMENTS

BIG SKY OWNERS ASSOCIATION

SECTION 16496A MTS MANUAL TRANSFER SWITCH (MANUAL CONTROL ONLY) Note to Spec Writer: { } Denotes EATON Feature reference number

NORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017

VERTICAL ASSESSMENT INSPECTION ISO/IEC 17020:2012

LEED v4 for Homes, Residential Project Summary and Checklist One and Two Family New Construction

DIVISION: CONCRETE SECTION: CONCRETE ACCESSORIES SECTION: REINFORCING STEEL REPORT HOLDER: PJ S REBAR INC.

5.43 NOSA CMB

Application Requirements for obtaining a Building Permit

ICC Product Update December 23, 2009

INDUSTRIALIZED HOUSING AND BUILDINGS Administrative Rules of the Texas Department of Licensing and Regulation 16 Texas Administrative Code, Chapter 70

Inspection Requirements For Anchors in Concrete in Accordance With ACI and

Virginia Tech University Building Officials Office. Uniform Statewide Building Code Special Inspection. Guidelines and Procedures

Questions and Answers Questions et réponses

CITY OF HAGERSTOWN PLANNING & CODE ADMINISTRATION DEPARTMENT. Submittal Requirements

New York State Contract Reporter NYS' official source of contracting opportunities Bringing business and government together

NRC INSPECTION MANUAL INSPECTION PROCEDURE 35065

BUILDING PERMIT APPLICATION GUIDE FOR HOMEOWNERS

Centerwide System Level Procedure

TOWN OF PORT ROYAL BUILDING CODES DEPARTMENT Building Permit Submittal Requirements

Supplemental Concrete Tilt Up Retrofit Plan Check Correction Sheet (2014 LABC)

NR CHECKLIST Rev. 1. QAM IMP References NBIC Part 3, 1.8 Y N Y N a. Organization. Company Name/Certificate Number: Page 1 of 26

BUILDING PERMIT APPLICATION TYPE OF PERMIT: NEW CONSTRUCTION ADDITION ALTERATION HUD HOME MODULAR HOME OTHER:

1. Pre-Construction Conference Information: Date of Pre-Construction Conference: Owner/Operator Name:

New York State Unified Solar Permit Expedited Solar Permit Process for Small-Scale Roof-Mounted Residential and Commercial Solar Electric

TOWN OF ROTTERDAM RESIDENTIAL BUILDING PERMIT APPLICATION Ext. 395 Needed to Obtain Permit:

WSH (Design for Safety) Regulations - An Overview -

APPLICATION FOR PORCH / DECK PERMIT

Quality Control and Quality Assurance for Installation of Steel Deck

City of Altamonte Springs Developer s Guide

Earthquake Brace + Bolt Program: Rules for Participation

Permit Requirements: Building Codes: The City of Clanton has adopted the following codes which are enforced by the Building Department:

PACIFIC MARINE SERVICES

Facilities Planning and Construction (FP&C)

BUILDING PERMIT APPLICATION

On Site Completion of Construction of Manufactured Homes

CITY OF CRANSTON RESIDENTIAL PERMIT PROCEDURE BASEMENT RENOVATION

LEED for Homes Sampling Protocol for Multi-family Projects 2011 Version

Civil Engineering Responsibilities in Special Inspection

DIVISION: CONCRETE SECTION: CONCRETE ACCESSORIES SECTION: REINFORCING STEEL REPORT HOLDER: PEIKKO GROUP, INC.

Desk Audit of. Based on Federal Transit Administration (FTA) Quality Assurance and Quality Control Guidelines FTA-IT

COMMERCIAL WINDSTORM MITIGATION INSPECTION REPORT

BASEMENT FINISH CONSTRUCTION

DRAWING NUMBER REVISION TITLE REV DATE PAGE

HYBRID COLLABORATIVE DELIVERY TEAM/ INTEGRATED PROJECT DELIVERY DOCUMENTS SUBMITTAL PROCESS

Announces. Important Changes to the Project Inspector Exam Process for The exam is based on the 2010 California Building Code.

PIKES PEAK REGIONAL BUILDING DEPARTMENT

Chapter 1: Application and Administration

Guide for AWS Visual Weld Inspection

REQUEST FOR SPECIAL IDENTIFICATION NUMBER (MVIN) APPLICATION CHECKLIST

Specifying metal studs for interior and exterior walls can be simple.

Submission Checklist: In-Home Applicants Only - Please complete #1-5 on Submission Checklist

STRUCTURAL TESTS AND SPECIAL INSPECTIONS

ARKANSAS STATE HIGHWAY AND TRANSPORTATION DEPARTMENT CONSULTANT SELECTION PROCEDURES FOR ENGINEERING AND DESIGN RELATED SERVICES

BULLETIN. Permitting Tips (2/10/14)

HOUSE REPAIRS & RENOVATIONS BUILDING PERMIT REQUIREMENTS

1996 Bachelor of Science, Civil Engineering University of Central Florida, Orlando, Florida

SIDING BUILDING PERMIT APPLICATION

BORDEREAU DE TRANSMISSION DESSINS D'ATELIER & FICHES TECHNIQUES. PROJET : Centre de formation Duchesnay N/D : (X)

Figure 1. Report of Inspection Process Flowchart.

Green Ordinance Implementation City of Dallas, TX

How IBC-2009 seismic and wind loading standards apply to emergency standby power systems

NY State Unified Solar Permit

ECONOMICS COURSE. Preconstruction Operations

Service Suppliers Performing Tightness Testing of Hatches With Ultrasonic Equipment on Ships, High Speed and Light Craft and Mobile Offshore Units

The following materials and documents are required in order for you to obtain a Building Permit:

Building Permit Application Instructions INFORMATION REQUIRED FOR ISSUANCE OF A BUILDING PERMIT

CITY of COLDWATER. Requirements for Obtaining Building Permits City of Coldwater, Michigan

Architectural Services

PLAN SUBMITTAL GUIDELINES FOR THE HYBRID COLLABORATIVE DELIVERY TEAM

Oregon Solar Installation Specialty Code and Commentary

The following is required for a complete permit submittal for each unit.

ACC New Home Approval Process, Builder Guidelines, & Design Review Checklist

Residence Hall Phase XVI Code Item 308 Code Item 312 Advanced Planning

APPENDIX 3 PASSHE FORM 150 ASP APPLICATION FOR SPECIFIC PROJECT

MUNICIPAL OFFICES 1481 EAST COLLEGE AVENUE, STATE COLLEGE, PA TELEPHONE: FAX:

Construction Quality Assurance

Application for a Sewage System Permit

Vendor Qualification Survey

Transcription:

SPECIAL INSPECTION PROCEDURE IBC CHAPTER 17 When Required All projects that require a SC licensed Architect or Engineer per SC Architectural and Engineering registration law. Overview The program consists of five forms, which must be filled out by the SC Design Professional in Responsible Charge and submitted to the building department. The Statement of the Design Professional in Responsible Charge, Earthquake Design Data Form, Checklist of Required Special Inspection Reports, & The Statement of Special Inspections must be submitted at the time of application for Plan Review. The Final Report of Special Inspections is to be placed at the jobsite with all the field reports upon completion of the project, and made available to the Building Inspector during or prior to the Final Building Inspection. The Owners Acknowledgement of Special Inspections must also be submitted at the time of application for plan review. The Contractor's Statement of Responsibility for Seismic-Force-Resisting Systems must be submitted prior to permitting. Statement of Design Professional in Responsible Charge This form provides the general information about the project and identifies the SC Design Professional in Responsible Charge as required in IBC Section 106.3.4.1. This form is submitted as a condition for permit issuance and as a commitment to Special Inspections. Earthquake Design Data Form This form is to be completed by the Structural Engineer and must be consistent with the Structural Analysis on the construction documents. Checklist of Required Inspection Reports, The Statement of Special Inspections These forms are to be filled out by the SC Design Professional in Responsible Charge by checking the boxes of the required inspections specific to the project. The names of the individuals or firms providing these inspections will be entered at this time. The qualifications for the inspector will be specific to the inspection performed. The minimum qualifications will be as listed by the South Carolina Building Code Council Special Inspection Policy document, or as approved by the Building Official. The forms will be reviewed by the Greenville County Plan Review Department for completeness. The Statement of Special Inspections is required for all projects. Field Reports These reports are the results of the required inspections and must be performed by the individuals/firms designated by the SC Design Professional in Responsible Charge. All field reports generated from the inspections must be kept on the jobsite in a binder with the County of Greenville approved drawings and contain the following information: (A generic example form is included in this package). The project name and Permit Number. The project address. The name address and phone number of the individual/finn performing the inspection and generating the report. The IBC Section or Table number of the inspection. The criteria for each inspection must be performed as outlined in the appropriate code section or table and as specified in The Checklist of Special Inspections. Some inspections are periodic, some are continuous, and others are performed only once. When tables are referenced all applicable criteria in the table must be addressed. Final Report of Special Inspections The SC Design Professional in Responsible Charge shall collect final inspection reports from all inspections requiring more than one inspection then fill out the Final Report of Inspections. This report is certifying that all required inspections have been perfonned and all corrections have been made. The report is then put with the field reports in the binder on the jobsite prior to requesting a Final Building Inspection. An updated Checklist of Required Special Inspection Reports & The Statement of Special Inspections including all names and addresses of firms that performed the inspections must also to be provided. Contractor's Statement of Responsibility for Seismic-Force-Resisting Systems This form is to be filled out by the contractor. Owners Acknowledgement of Special Inspections This form is to be filled out by the owner of the project. 3 January 2005/Rev. 8 Feb. 2008 1 of 16