Bolted Three Piece Forged Steel TRUNNION BA VAV
Trunnion Valve Features: Forged -piece construction Fire safe design ouble block and bleed design C.S. trim with mil NC ISO mounting pads Sealant injection ports for both stem and seats ifting lugs and support stands on and larger for safety and ease of field handling esign & Quality Specifications: ASM B. ASM B. API NAC MR-0-75 API 59 API 07, th edition ISO 900 Canadian Registration Numbers (CRN) Table of Contents:. Features and esign Specifications. Part Number Identification Temperature & Pressure Chart. FIG: TB - & Class 50-00 Class 50-00. Standard Materials ist: FIG: TB & Class 50-00 Class 50-00 5. FIG: TB - & Class 900-500 Class 00-500. Standard Materials ist: FIG: TB & Class 900-500 Class 00-500 7. FIG: TB - & arger Class 50-500. Standard Materials ist: FIG: TB & arger Class 50-500 9. imensions - FP Trunnions. imensions - FP Trunnions. imensions - RP Trunnions. imensions - RP Trunnions. Top Works. Bolting imensions
PART NUMBR INTIFICATION Type T - Trunnion Construction Style B - Bolted pc B - Bolted pc Port F=Full R=Reduced Size 5= /" =" = /" 5= /" 7= 7/" 0=" 5= /" 0=" 0=" 0=" 0=" 0=" =" Connection Type A=RF Smooth Face B=BW Sch. 0 C=BW Sch. 0 =BW Sch. 0 =BW Sch XXH J=RTJ R=Raised Face X=Special Pressure Rating 0-50 ASM 0-00 ASM 0-00 ASM 0-00 ASM 09-900 ASM 5-500 ASM 5-500 ASM A - 00 API A - 000 API A5-5000 API Style/Service A= NAC =ow Temp. (- 50 F) NAC N=NAC X=Other/Special Top Works G - Gear Op. H - Handle B - Bare Stem Trim Options S - Teflon/HSN S - Nylon/HSN S - Peek/HSN T B - F 0 R 0 G S Therefore atb-f0r0g is a Trunnion, Bolted Piece, Full Port, inch, Raised Face, Class 00, ow Temp. NAC Trim, Gear Operator. Please Contact Meridian for Body, Trim, Connection and Pressure Classes not listed above. TMPRATUR/PRSSUR CHART Temperature C 9 9 0 000 7 ASM 500 500 000 7 500 7 ASM 900 PSI 00 Class 500 Class 900 500 ASM 00 Class 00 Class 00 00 9 Class 50 ASM 00 VITON 500 Nylon Teflon 0 ASM 50 0 0 00 00 500 00 Bars Temperature F U TO CONTINUOUS VOPMNT OF OUR PROUCTS, W RSRV TH RIGHT TO MOIFY OUR PROUCT SIGN OR CONSTRUCTION WITHOUT PRIOR NOTIC.
FIG: TB - & Class 50 ~ 00 Class 50 ~ 00 -PIC FORG ST, BOT BOY CONSTRUCTION, FIR SAF SIGN, ANTI-STATIC, SAT & STM INJCTION, VR OPRAT, OCKING VIC, ISO MOUNTING PA. 7 7 5 0 5 9 7 9 7 5 0 S O 9 9 U TO CONTINUOUS VOPMNT OF OUR PROUCTS, W RSRV TH RIGHT TO MOIFY OUR PROUCT SIGN OR CONSTRUCTION WITHOUT PRIOR NOTIC.
STANAR MATRIAS IST & Class 50 ~ 00 Class 50 ~ 00 ow Temp. (-50F) No. Parts NAC Service NAC Service NAC Service Body ASTM A5N ASTM A50-F ASTM A-F Adaptor ASTM A5N ASTM A50-F ASTM A-F Ball NC NC ASTM A-F Handle ASTM A-WCB ASTM A5-CB Seat Retainer ASTM A-F ASTM A-F ASTM A-F 7 Seat Insert Glass Filled PTF-00 Class Glass Filled PTF-00 Class Glass Filled PTF-00 Class Nylon-900 & 500 Class Nylon-900 & 500 Class Nylon-900 & 500 Class Stem NC NC ASTM A-F 9 Trunnion ASTM A5 NP ASTM A50-F NP ASTM A-F Body Gasket Graphite Graphite Graphite Gland Gasket Graphite Graphite Graphite Spacer PTF PTF PTF Stem Packing Graphite Graphite Graphite Seat Retainer Gasket Graphite Graphite Graphite 5 Top Plate ASTM A5 ASTM A50-F ASTM A-F Gland ASTM A5 ASTM A50-F ASTM A-F 7 Stop Plate Carbon Steel Carbon Steel Thrust Washer PTF PTF PTF 9 Stem Bearing +PTF +PTF +PTF Trunnion Bearing +PTF +PTF +PTF Seat Follower ASTM A5 NP ASTM A50-F NP ASTM A-F Antistatic Spring Seat Spring Inconel X-750 Inconel X-750 Inconel X-750 Grounding Plunger ASTM A-F ASTM A-F ASTM A-F 5 Seat Retainer O-Ring HSN HSN Viton / HSN Body O-Ring HSN HSN Viton / HSN 7 Stem O-Ring HSN HSN Viton / HSN Gland O-Ring HSN HSN Viton / HSN 9 Vent Valve ASTM A-F ASTM A-F ASTM A-F 0 Body Stud ASTM A9-B7M ASTM A-7M ASTM A9-B Body Nut ASTM A9-HM ASTM A9-7M ASTM A9- Gland Bolt ASTM A9-B7M ASTM A-7M ASTM A9-B Top Plate Bolt ASTM A9-B7M ASTM A-7M ASTM A9-B Bottom Plate Bolt ASTM A9-B7M ASTM A-7M ASTM A9-B 5 Pin Carbon Steel Carbon Steel Retainer Clip Carbon Steel Carbon Steel 7 Washer Carbon Steel Carbon Steel Bolt Carbon Steel Carbon Steel 9 Stop Screw Carbon Steel Carbon Steel 0 Name Plate Rivet Name Plate Aluminum Aluminum Plug Grease Injection Fitting ASTM A-F ASTM A-F ASTM A-F U TO CONTINUOUS VOPMNT OF OUR PROUCTS, W RSRV TH RIGHT TO MOIFY OUR PROUCT SIGN OR CONSTRUCTION WITHOUT PRIOR NOTIC.
FIG: TB - & Class 900 ~ 500 Class 00 ~ 500 (For Class 500 valves, please consult Meridian.) -PIC FORG ST, BOT BOY CONSTRUCTION, FIR SAF SIGN, ANTI-STATIC, SAT & STM INJCTION, VR/GAR OPRAT, OCKING VIC, ISO MOUNTING PA. 5 9 0 A 7 7 5 5 B 5 A C B 9 7 9 7 C 7 9 0 9 OPN SHUT S O 5 5 50 5 5 7 5 5 5 Gear Operator U TO CONTINUOUS VOPMNT OF OUR PROUCTS, W RSRV TH RIGHT TO MOIFY OUR PROUCT SIGN OR CONSTRUCTION WITHOUT PRIOR NOTIC. 5
STANAR MATRIAS IST (For Class 500 valves, please consult Meridian.) No. Parts NAC Service ow Temp. (-50F) NAC Service NAC Service Body ASTM A5N ASTM A50-F ASTM A-F Adaptor ASTM A5N ASTM A50-F ASTM A-F Ball NP NP 7- Handle Yoke ASTM A -WCB ASTM A5-CB Seat Retainer ASTM A -F ASTM A-F ASTM A-F 7 Seat Insert Nylon-900 & 500 Class Nylon-900 & 500 Class Nylon-900 & 500 Class PK - 500 Class PK - 500 Class PK - 500 Class Stem NP NP 7-9 Trunnion ASTM A5 NP ASTM A50-F NP ASTM A-F Body Gasket Graphite Graphite Graphite Gland Gasket Graphite Graphite Graphite Spacer PTF PTF PTF Stem Packing Graphite Graphite Graphite Seat Retainer Gasket Graphite Graphite Graphite 5 Top Plate ASTM A5 ASTM A50-F ASTM A-F Gland ASTM A5 ASTM A50-F ASTM A-F 7 Stop Plate Carbon Steel Carbon Steel Thrust Washer PTF PTF PTF 9 Stem Bearing +PTF +PTF +PTF Trunnion Bearing +PTF +PTF +PTF Seat Follower ASTM A5 NP. ASTM A50-F NP. ASTM A-F ock Pin Carbon Steel Carbon Steel Antistatic Spring ASTM A -F ASTM A-F ASTM A-F Seat Spring Inconel X-750 Inconel X-750 Inconel X-750 5 Grounding Plunger ASTM A -F ASTM A-F ASTM A-F Seat O-Ring HSN HSN HSN 7 Body O-Ring HSN HSN HSN Stem O-Ring HSN HSN HSN 9 Gland O-ring HSN HSN HSN 0 Pipe Handle Carbon Steel Carbon Steel Vent Valve ASTM A -F ASTM A-F ASTM A-F Body Stud ASTM A9 -B7M ASTM A-7M ASTM A9-B Body Nut ASTM A9 -HM ASTM A9-7M ASTM A9- Stop Screw ASTM A9 -B7M ASTM A-7M ASTM A9-B 5 Yoke Screw ASTM A9 -B7M ASTM A-7M ASTM A9-B Gland Bolt ASTM A9 -B7M ASTM A-7M ASTM A9-B 7 Top Plate Bolt ASTM A9 -B7M ASTM A-7M ASTM A9-B Pin Carbon Steel Carbon Steel 9 Handle Bolt Carbon Steel Carbon Steel 0 Bottom Plate Bolt ASTM A9 -B7M ASTM A-7M ASTM A9-B Retainer Clip Carbon Steel Carbon Steel Name Plate Rivet Name Plate Aluminum Aluminum Plug ASTM A -F ASTM A-F ASTM A-F 5 Grease Injection Fitting ASTM A -F ASTM A-F ASTM A-F *7 Back up Ring PTF PTF PTF * Back up Ring PTF PTF PTF *9 Back up Ring PTF PTF PTF 50 Stem Key Carbon Steel Carbon Steel 5 Key Pin Carbon Steel Carbon Steel **5 Gear Operator WCB CC CFM **5 Gear Operator Stud ASTM A9 -B7M ASTM A-7M ASTM A9-B **5 Nut ASTM A9 -HM ASTM A9-7M ASTM A9- *Only applies to Class 500 & 500 / **Only applies to Gear Operated Valves U TO CONTINUOUS VOPMNT OF OUR PROUCTS, W RSRV TH RIGHT TO MOIFY OUR PROUCT SIGN OR CONSTRUCTION WITHOUT PRIOR NOTIC. & Class 900 ~ 500 Class 00 ~ 500
N FIG. TB - & arger, Class 50 ~ 500 (For Class 500 valves, please consult Meridian.) -PIC FORG ST, BOT BOY CONSTRUCTION, FIR SAF SIGN, ANTI-STATIC, SAT & STM INJCTION, GAR OPRAT, ISO MOUNTING PA. 9 5 7 7 OPN A SHUT 0 9 9 A 9 5 B B 7 7 S O C O P 0 5 7 5 U TO CONTINUOUS VOPMNT OF OUR PROUCTS, W RSRV TH RIGHT TO MOIFY OUR PROUCT SIGN OR CONSTRUCTION WITHOUT PRIOR NOTIC. 7
(For Class 500 valves, please consult Meridian.) STANAR MATRIAS IST and arger Class 50 ~ 500 ow Temp. (-50F) No. Parts NAC Service NAC Service NAC Service Body ASTM A5N ASTM A50-F ASTM A-F Adaptor ASTM A5N ASTM A50-F ASTM A-F * Ball A5 NP/F F NP/F ASTM A-F Gear Op/Handwheel WCB CC CFM * Seat Retainer A5 NP/F F NP/F ASTM A-F 7 Seat Insert Nylon-" Bore and larger 00 C, all 900 C and 500 C Nylon-" Bore and larger 00 C, all 900 C and 500 C Nylon-" Bore and larger 00 C, all 900 C and 500 C Grease Injection Fitting ASTM A-F ASTM A-F ASTM A-F *9 Stem A5 NP/F F NP/F ASTM A-F Trunnion Alignment Pin ASTM A-F ASTM A-F ASTM A-F Shim ASTM A-F ASTM A-F ASTM A-F Stem Packing Flexible Graphite Flexible Graphite Flexible Graphite Trunnion Support ASTM A-WCB NP. ASTM A5-CB NP. ASTM A5-CF Gland Gasket Spiral Wound Graphite Spiral Wound Graphite Spiral Wound Graphite 5 Body Gasket Spiral Wound Graphite Spiral Wound Graphite Spiral Wound Graphite Spacer PTF PTF PTF 7 Seat Retainer Gasket Flexible Graphite Flexible Graphite Flexible Graphite Gland ASTM A5 ASTM A50-F ASTM A-F 9 Top Plate ASTM A5 ASTM A50-F ASTM A-F Thrust Washer PTF PTF PTF Trunnion Bearing +PTF +PTF +PTF Seat Follower ASTM A5 NP. ASTM A50-F NP. ASTM A-F Vent Valve ASTM A-F ASTM A-F ASTM A-F rain Plug ASTM A-F ASTM A-F ASTM A-F 5 Seat Spring Inconel X-750 Inconel X-750 Inconel X-750 Antistatic Spring 7 Grounding Pluger Gland O-Ring Viton / HSN Viton / HSN Viton / HSN 9 Stem O-Ring Viton / HSN Viton / HSN Viton / HSN 0 Seat O-Ring Viton / HSN Viton / HSN Viton / HSN O-Ring Viton / HSN Viton / HSN Viton / HSN Body Stud ASTM A9-B7M ASTM A-7M ASTM A9-B Body Nut ASTM A9-HM ASTM A9-7M ASTM A9- Top Plate Bolt ASTM A9-B7M ASTM A-7M ASTM A9-B 5 Gland Plate Bolt ASTM A9-B7M ASTM A-7M ASTM A9-B Gear Operator Stud ASTM A9-B7M ASTM A-7M ASTM A9-B 7 Nut ASTM A9-HM ASTM A9-7M ASTM A9- Pin Carbon Steel Carbon Steel 9 Key Pin Carbon Steel Carbon Steel 0 Stem Key Carbon Steel Carbon Steel Name Plate Rivet Name Plate ifting ugs Carbon Steel Carbon Steel Carbon Steel Support egs Carbon Steel Carbon Steel Carbon Steel **5 Back up Ring PTF PTF PTF ** Back up Ring PTF PTF PTF **7 Back up Ring PTF PTF PTF ** Back up Ring PTF PTF PTF * bore supplied with SS, bore and larger c/w CS NP Trim / ** Only applies to Class 500. U TO CONTINUOUS VOPMNT OF OUR PROUCTS, W RSRV TH RIGHT TO MOIFY OUR PROUCT SIGN OR CONSTRUCTION WITHOUT PRIOR NOTIC.
O N P IMNSIONS ~ FP Trunnions OPN SHUT H H S O C S O W NPS " " " " CASS RF RTJ H W WIGHT 50 IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM BS KG 5 7.00 7 7.50 9. 7.. 5 - - - - 0 00 5.50 9.. 7.. 5 - - - - 77 5 00 5.50 9. 95. - -. 5 - - - - 95 900/500 5.50. 7 7.. 97 - - 9.. 00 0 500.7 - - 7.9 5 9. 0.7 0.5 - - 9.. 00 0 50 7.00.50 7... 5 - - - - 0 00 7..75 99 7... 5 - - - - 5 00 7.00 5. 59 7.0 7 - - 5.7 00 - - - - 5 75 900 7 5.00 5. 9. 50. 9.7 755 - - 7 5 500 7.50 70. 7. 5 5.0 - - 9.. 00 0 500.5 - - 5. 5.7 - -.0 5.7 00 0 50 9.00 9 9.50.0 5.0 7. 5 - - - - 9 00.00. 7. 9 5.0 5.7 00 - - - - 00 7.00 7.. - - 9.7 755 - - - - 9 5 900.00 57. 0. 75 5..7 5 - - - - 0 50 500.50 5.0 5.7 7 5.7 - -.0 5.7 00 0 0 500.5 9 - -.9.9 0.5 - -.0 5.7 00 0 50 5 5.50 9.00 0 9. 7. - - 9.. 00 90 00 5 5.90 0.50 9. 5.7 - - 9.. 00 0 0 00 5.00 559. 5. 5 7.5 90 - - 9.. 00 59 5 900 5.00.. 7. 7 - -. 5 9.7 500 0 500 5.7 7.75 705.00 7.. 00 - -. 5. 00 50 U TO CONTINUOUS VOPMNT OF OUR PROUCTS, W RSRV TH RIGHT TO MOIFY OUR PROUCT SIGN OR CONSTRUCTION WITHOUT PRIOR NOTIC. 9
O N P IMNSIONS ~ FP Trunnions OPN SHUT H H S O C S O W NPS " " " CASS RF RTJ H W WIGHT IN MM IN MM IN MM IN MM IN MM IN MM IN MM BS KG 50.00 57.50 70.5 9.5 5 9.. 00 759 5 00 9.75 50.0 5...0 5.7 00 0 5 00.00 0.. 7.. 5 9.7 500 9 0 900 9.00 77 9. 79.0 55.9. 5. 00 09 550 500 9.75. 0 5.9 0.5.. 00 5 7 50 5.00 5.50 5.5 9..0 5.7 00 0 00 5.0 5.00 5. 7. 77. 5 9.7 500 09 550 00 5.00 77. 790. 70. 70. 5. 00 550 705 900 5.00. 0.5.0 5. 90 5.7 00 759 00 500 9.5 9.00 99 9.0 00 7.7 50 5.7 00 9.7 500. 00 9 00 50.00.5 7.0.7 9. 5 9.7 500 95 0 00 5.50..7 7.. 5. 00 9 750 00.00..9 0.5 5. 90 5.7 00 95 0 900.00 95. 97.7 55.0 9.. 00 9 0 500. 9.50 0 5. 5. 5 7. 7 9.7 500. 00 95 0 For arger Sizes Up to " Please Consult Meridian For imensional Information U TO CONTINUOUS VOPMNT OF OUR PROUCTS, W RSRV TH RIGHT TO MOIFY OUR PROUCT SIGN OR CONSTRUCTION WITHOUT PRIOR NOTIC.
O N P IMNSIONS OPN SHUT ~ RP Trunnions H H S O C S O W NPS "X" "X" "X" "X" CASS RF RTJ H W WIGHT IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM BS KG 50 5.00.50 7. 7.. 5 - - - - 77 5 00 5..75 99 7. 7.. 5 - - - - 0 00 5.00 5. 59 7. - -. 5 - - - - 7 900 5 5.00 5. 7 7.. 97 - - 9.. 00 9 95 500 5.50 70. 7 7 7.. 97 - - 9.. 00 50 7 9.00 9 9.50 7... 5 - - - - 5 00 7.00. 7... 5 - - - - 5 70 00 7 7.00 7. 7.0 7 - - 5.7 00 - - - - 7 0 900 7.00 57. 0 9. 50. 9.7 755 - - - - 9 95 500 7.50 5.0 5. 5 5.0 - - 9.. 00 0 50 5.50 9.00 0 5.0 5.0 7. 5 - - - 9 95 00 5.90 0.50 9 5 7. 9 5.0 5.7 00 - - - - 59 00.00 559. 5 5. - - 9.7 755 - - - - 5 900.00. 5. 75 5..7 5 - - - - 5 500 7.75 705.00 7 5.7 7 5.7 - -.0 5.7 00 7 5 50 5.00 57.5 70 9. 7. - - 9.. 00 0 0 00 5 9.75 50. 5. 5.7 - - 9.. 00 7 5 00 5.00 0.. 5 7.5 90 - - 9.. 00 57 0 900 5 9.00 77 9. 79. 7. 7 - -. 5 9.7 500 0 00 500 5.7.75. 0.. 00 - -. 5. 00 9 00 U TO CONTINUOUS VOPMNT OF OUR PROUCTS, W RSRV TH RIGHT TO MOIFY OUR PROUCT SIGN OR CONSTRUCTION WITHOUT PRIOR NOTIC.
O N P IMNSIONS OPN SHUT ~ RP Trunnions H H S O C S O NPS "X" CASS 50 00 00 900 500 W RF RTJ H W IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM.00 5.50 5 5.5 9.5 5 9.. 00.0 5.00 5 5...0 5.7 00.00 77. 790 5. 7.. 5 9.7 500.00. 0 5.0 55.7.0 55. 00 7. 9 9.00 99 9.0 00 5.9 0.5.. 00 "X" 50 00 00 900 500 9.5 5 5 5 5.00 5.50.00.00.50 95 0.50... 5. 97 5 9.5...5 7.7 7 70 50 9....0 5.7 77 70 00.0.. 5. 9.7 5 5 90 500 5.7 9.7. 5.7. 00 500 00 00 00 "X" 50 00 00 900 500. 9 7.00 0.00 5.00 0.50 9.50 5 7 9 9 57 7.50 0. 5. 0. 50.5 9 77 9 7 9 7.0.7.9.7. 0 55 5.7 7..5.0 7. 9 9 7.. 5.. 9.7 5 5 90 500 9.7. 5.7.. 500 00 00 00 00 For arger Sizes Up to " Please Consult Meridian For imensional Information U TO CONTINUOUS VOPMNT OF OUR PROUCTS, W RSRV TH RIGHT TO MOIFY OUR PROUCT SIGN OR CONSTRUCTION WITHOUT PRIOR NOTIC.
TOP WORKS stem top flange f h H t n-ød Bore IMNSIONS mm ISO 5 (in) CASS A B C H h f t n-d Flange " " " 50 5 70 9 5 - F 00 5 70 9 5 - F 00 5 70 5.5 5 - F 900/500 50 5 5 0 5.5. - F 50 5 70 5.5 5 - F 00 5 70 5.5 5 - F 00 50 5 5 0 5.5 - F 900 75 0 5 50 7 5 - F 500 75 0 0 7 5 5 5 5 - F 50 5 70 5.5 5 - F 00 50 5 5 0 9 7 - F 00 75 0 5 50 7 5 - F 900 75 0 0 7 59 5. 5 5 - F stem ØA ØB ØC Ø Key top flange n-ød f t KY Bore IMNSIONS mm ISO 5 IN 5 (in) CASS A B C f t n-d Flange b*h*l 500 5 0 50 50 5. - F C*9*50 " " " " 50 75 0 0 7.5 5 5 - F C**50 00 75 0 0 7.5 5 5 - F C**50 00 5 0 50 50. - F C*9*50 900 00 5 0 0 70. - F5 C**70 500 00 5 0 70 90 7. - F5 C**90 50 5 0 50 50. - F C*9*50 00 5 0 50 50. - F C*9*50 00 00 5 0 0 70. - F5 C**70 900 00 5 0 70 0 7. - F5 C**0 500 00 5 0 0 0 7.5 - F5 C**0 50 5 0 50 50. - F C*9*50 00 00 5 0 0 70. - F5 C**70 00 00 5 0 70 0 7. - F5 C**0 900 00 5 0 0 7.5 - F5 C** 500 00 5 0 0 7.5 - F5 C** 50 00 5 0 0 70. - F5 C**70 00 00 5 0 70 0 7. - F5 C**0 00 00 5 0 70 0 7. - F5 C**0 900 00 5 0 0 7.5 - F5 C** 500 50 9 0 0 50 7.5 - F0 C**50 U TO CONTINUOUS VOPMNT OF OUR PROUCTS, W RSRV TH RIGHT TO MOIFY OUR PROUCT SIGN OR CONSTRUCTION WITHOUT PRIOR NOTIC.
BOTING IMNSIONS ASM CASS 50 00 00 900 500 500 NOMINA PIP SIZ / / / / / FANG IAM..00 7.00 7.50 9.00.00.50.00 9.00.00.50 5.00 7.50.00.50 7.50.5.00.50 5.00 7.50.50.00 5.50.00 0.50.00.50 7.50.5.75.00.50.00.00.75 7.00 9.5.00 7.00.50 9. 9.50.50 5.00.50.50 9..50.5 5.50 9.00 9.5.00.00 BOT CIRC IAM..75 5.50.00 7.50 9.50.75.5 7.00.75.5.75 5.00 9.50 5.00 5.. 7...00 5.5 7.75.5.50.75 7.00.00 5.00 5...50.50.75 7.00 9.5.75.75 5.75.50.00.50 7.50 7.50 9.5.50 5.50.50 7.50.00 9.50.50 5.50.75 9.00.75 IMNSIONS IN INCHS NO. OF STUS IAM. OF STUS 5 / 5 / 5 / 5 / / / 7 / 7 / / / / 5 / / / / / 7 / / / / / / / 5 / / / 7 / / / / / / 5 / 5 / 7 / 7 / 7 / / / / 7 / / / / 5 / / / STU BOT NGTH RAIS FAC / / / / / / / 5 / 5 / / 7 / / / / 5 / / / 7 7 / 7 / / 9 / / 5 5 5 / / 7 / / / 9 / / / 5 / / 5 / / 7 / / 5 / / / 7 / / / / 9 / RING JOINT / / 5 / 7 / 9 9 / / / / 5 / / 5 / / 7 / / 5 / / 7 7 / / / 7 9 / U TO CONTINUOUS VOPMNT OF OUR PROUCTS, W RSRV TH RIGHT TO MOIFY OUR PROUCT SIGN OR CONSTRUCTION WITHOUT PRIOR NOTIC.
OC R7 0/0 70-9 Street dmonton AB Canada T B Tel: (70) -7 Toll Free: -00--997 Fax: (70) 9-55 Toll Free Fax: -00--9