ANDING DEVICES
About us Eurofork S.r.l., founded in year 2000, is an Italian company which produces automatic handling systems. ith its over 20 years of know-how gained in the handling field, Eurofork today is one of the leading players on the global market concerning the production of handling devices, for both number of units produced and for its turnover. In addition to Telescopic forks division, the company boasts two other areas: Service department that deals with after sales assistance, maintenance, and selling of spare parts, and ESMARTSUTTE division, specialized in the design and manufacture of shuttle systems for multi depth automated warehouses. Vision & Mission The aim of Eurofork is to be a reference point in the logistic automation field as producer of high quality handling devices. Company s past, present and future are connected by one guideline: INNOVATIONS FOR SYSTEM INTEGRATORS Eurofork s ambition is to propose always more innovative products granting System Integrators cutting-edge solutions. Our goal is to satisfy Customers with functional, beautiful and efficient products.
Telescopic Forks Telescopic forks are made of a fixed body and a variable number of sliders. Such devices are mainly used in automated warehouses and in several industrial automation systems. In the automated warehouses, the telescopic forks handle loads from the aisle s centre to the rack positions and vice versa. They can be installed also on other devices as AGVs-GVs with a lifting unit. Accordingly to the storage units positiong, telescopic forks are classified in Single Deep forks (two mobile parts and one fixed body), Double Deep forks (three mobile parts and one fixed body) and Triple Deep forks (four mobile parts and one fixed body). ESMARTSUTTE ESMARTSUTTE is the patented solution for high density warehouses. It consists in two independent modules: shuttle and satellite. The shuttle is the main trolley which carries the satellite and/or the storage unit in the X-direction. This module can be supplied with an integrated chain conveyor that is used to transfer the storage units to the IN/OUT bays. The satellite is the smaller trolley which lifts, carries and stores the loading unit in the warehouse channels (Z-direction). Service Eurofork service team consists of skilled technicians able to operate in reduced time on all types of telescopic forks and other handling devices even produced by other manufacturers. Different types of assistance contracts will guarantee minimized costs and will increase the product s lifetime. ith regards to ESMARTSUTTE system, with a remote assistance our technicians can solve problems in real time.
Telescopic Forks Telescopic forks are classified as follows: Single Deep: characterized by two slides and one fixed body. These forks perform a bilateral movement called single deep, being able to handle loads stored in a single line shelves. Double Deep: characterized by three slides and one fixed body. These forks perform a bilateral movement called double deep, so can handle loads stored in a two lines shelves. These forks can reach a higher ratio between stroke and fork s length if compared to the single deep ones: that means that it is possible to obtain greater strokes. Triple Deep: characterized by four slides and one fixed body. These forks perform a bilateral movement called triple deep. They are able to handle loads stored in a three lines shelves. Usually this kind of forks are used as double deep forks in case a reduced fixed body length is required or an high load shall be handled. The motion is transmitted from the geared motor to the first mobile part; the second sliding part will move at a double speed compared to the first one, thanks to a series of gears, chains or belts bounded to the fixed body. In case of double (or triple) deep telescopic forks, the motion will be transferred to the third (or fourth) sliding part. Cam-followers are used to vertically guide sliding parts, while lateral guided is obtained by using shoes accordingly to the working environment. Images in this catalogue are purely indicative, therefore Eurofork reserves the right to make improvements to the products without prior notice. www.eurofork.com
Single Deep S D egend Single Deep: X X S A D X Fork length Single Deep stroke Aisle width oad length ateral clearence A egend Double Deep: Double Deep S1 S2 A D X Y Fork length Single Deep stroke Double Deep stroke Aisle width oad length ateral clearence Gap between loads D S1 S2 Y X A
SINGE DEEP FORKS SD160... 8 SD175... 10 SD180... 12 SD190... 16 SD200... 18 SD250... 20 SD274... 22 SD300... 24 AUTOMOTIVE... 26 MINIOAD ANDING DEVICES SD200 & DD220 & DD225... 28 SD120 & SD130... 30 MÖE COMPACT S... 32 MÖE COMPACT D... 34 DOUBE DEEP FORKS DD160... 36 DD160V... 38 DD175... 40 DD175V... 42 DD180... 44 DD180V... 46 DD210 & DD220... 48 DD210V & DD220V... 50 SPECIA PRODUCTS SD370... 52 SD220 & SD280 & SD300... 53 SD114... 54 SD150... 55 DD350... 56 DD520 & DD600... 57 TD175X229... 58 TO SQUARED FORKS... 59 COI FORKS... 60 CRITICA ENVIRONMENTS FORKS... 61 ADDITIONS IFT SYSTEMS... 62 VARIABE FORK TO FORK DISTANCE... 63 BET SYSTEMS... 64 CAIN SYSTEMS... 65 SUTTE SYSTEMS ESMARTSUTTE... 66 STACKERSAT... 67
SINGE DEEP SD160 This type of single deep fork has been developed to offer the best solution to handle storage units with a small fork. Despite its small dimensions, 160 mm width and 65 mm height of mobile elements, this type of forks can handle storage units up to 800 kg on a complete set of forks. Each fork can be customized based on Customer s requirements. SD160 products are covered by international patent. Code idth eight SD160X65 160 mm 65 mm ighlights igh reliability and positioning accuracy Small size and lightweight Reduced deflection value Common spare parts for SD fork type Completely customizable AS/RS AGV GV Transfer station Additions Belts Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
Example of application Customer data Pallet 700 X 700 mm AGV idth 1000 mm 800 kg Stroke 1200 mm egend S US T Q Single Deep Stroke Upper Slide ength Single Deep Thickness idth ength Installation eight Suggested fork Set of two SD160X65 T 65 mm 160 mm 250 mm 1000 mm US 700 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 50 m/min Acceleration without load 1 m/s 2 Deflection 18 mm 9
SINGE DEEP SD175 This type of single deep fork has been designed to allow Customer to handle storage units in refrigerated environments with temperatures up to -28 C (- 18 F) with a small fork. The maximum load to be handle on a complete set in standard working condition is 1500 kg. Each fork can be customized based on Customer s requirements. SD175 products are covered by international patent. Code idth eight SD175X65 175 mm 65 mm SD175X68 175 mm 68 mm SD175X71 175 mm 71 mm Advantages igh reliability and positioning accuracy Optimized dimensions to handle EPA orks up to -28 C (- 18 F) Completely customizable EPA AS/RS Freezer Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
Example of application Customer data Pallet 1000 X 1200 mm Aisle idth 1600 mm 1500 kg Stroke 1400 mm arehouse Temperature -28 C egend S US T Q Single Deep Stroke Upper Slide ength Single Deep Thickness idth ength Installation eight Suggested fork Set of two SD175X71 T 71 mm 175 mm 250 mm 1400 mm US 1200 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 50 m/min Acceleration without load 1 m/s 2 Deflection 23 mm 11
SINGE DEEP SD180 This type of single deep fork has been developed to handle storage units in automated warehouses with a small fork. This product is characterized by an high inertia granted by whole element profile optimization, which allows to handle up to 1500 kg storage units with low deflection values. SD180 family is the standard Eurofork product used for simple deep loads handling. Thanks to its functionality and manufacturing process, the SD180 fork is extremely versatile. SD180 family is principally indicated to handle EPA with small storage units. Code idth eight SD180X65 180 mm 65 mm SD180X68 180 mm 68 mm SD180X70 180 mm 70 mm Each fork can be customized based on Customer s requirements. SD180 products are covered by international patent. ighlights igh reliability and positioning accuracy Optimized dimensions to handle EPA igh inertia / reduced deflection value Common spare parts for SD fork type Completely customizable AS/RS Transfer station Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
Example of application Customer data Pallet 800 X 1200 mm Aisle idth 1600 mm 1500 kg Stroke 1400 mm egend S US T Q Single Deep Stroke Upper Slide ength Single Deep Thickness idth ength Installation eight Suggested fork Set of two SD180X70 T 70 mm 180 mm 160 mm 1400 mm US 1200 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 50 m/min Acceleration without load 1 m/s 2 Deflection 24 mm 13
SINGE DEEP SD180 This type of single deep forks has the same characteristics of the previous mentioned models. Its higher dimensions permits to handle higher storage units than standard EPA: a complete set of SD180 forks can load up to 1900 kg maintaining low deflection values. It is mainly offered to handle non standard storage units. Each fork can be customized based on Customer s requirements. SD180 products are covered by international patent. Code idth eight SD180X85 180 mm 85 mm SD180X95 180 mm 95 mm SD180X100 180 mm 100 mm SD180X130 180 mm 130 mm ighlights igh reliability and positioning accuracy Optimized dimensions igh inertia / reduced deflection value Common spare parts for SD fork type Completely customizable AS/RS Transfer station Aerospace application Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
Example of application Customer data Pallet 1300 X 1300 mm Aisle idth 1600 mm 1900 kg Stroke 1500 mm egend S US T Q Single Deep Stroke Upper Slide ength Single Deep Thickness idth ength Installation eight Suggested fork Set of two SD180X130 T 130 mm 180 mm 250 mm 1400 mm US 1300 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 50 m/min Acceleration without load 1 m/s 2 Deflection 6 mm 15
SINGE DEEP SD190 Thanks to the enhancement performed on previous described SD forks types, and to their proven reliability, Eurofork developed a stronger version of SD forks suitable to handle heavy loads. SD190 forks can load up to 2000 kg per set. Each fork can be customized based on Customer s requirements. SD190 products are covered by international patent. Code idth eight SD190X85 190 mm 85 mm ighlights igh reliability and positioning accuracy Optimized dimensions igh inertia / reduced deflection value Common spare parts for SD fork type Completely customizable AS/RS Aerospace application Transfer station Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
Example of application Customer data Pallet 1300 X 1300 mm Aisle idth 1600 mm 2000 kg Stroke 1500 mm egend S US T Q Single Deep Stroke Upper Slide ength Single Deep Thickness idth ength Installation eight Suggested fork Set of two SD190X85 T 85 mm 190 mm 160 mm 1400 mm US 1300 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 50 m/min Acceleration without load 1 m/s 2 Deflection 21 mm 17
SINGE DEEP SD200 This family of forks, are the reinforced version of the SD190. Thanks to its increased dimensions compared to the other forks this type of equipment is suitable to handle heavy loads. SD200 forks can load up to 3000 kg per set. Each fork can be customized based on Customer s requirements. SD200 products are covered by international patent. Code idth eight SD200X110 200 mm 110 mm SD200X130 200 mm 130 mm ighlights igh reliability and positioning accuracy Optimized dimensions igh inertia / reduced deflection value Common spare parts for SD fork type Completely customizable AS/RS Aerospace application Coil Transfer station Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
S Q T US Example of application Customer data Pallet 1600 X 1600 mm Aisle idth 1800 mm 3000 kg Stroke 1700 mm egend S US T Q Single Deep Stroke Upper Slide ength Single Deep Thickness idth ength Installation eight Suggested fork Set of two SD200X130 T 130 mm 226 mm 230 mm 1600 mm US 1600 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 50 m/min Acceleration without load 1 m/s 2 Deflection 13 mm 19
SINGE DEEP SD250 Thanks to the enhancement performed on previous described SD forks types, and to their proven reliability, Eurofork developed a stronger version of SD forks suitable to handle heavy loads. SD250 forks can load up to 3500 kg per set. Each fork can be customized based on Customer s requirements. SD250 products are covered by international patent. Code idth eight SD250X110 250 mm 110 mm SD250X130 250 mm 130 mm ighlights igh reliability and positioning accuracy Optimized dimensions igh inertia / reduced deflection value Common spare parts for SD fork type Completely customizable AS/RS Aerospace application Coil Transfer station Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
S Q T US Example of application Customer data Pallet 1600 X 1600 mm Aisle idth 1800 mm 3500 kg Stroke 1700 mm egend S US T Q Single Deep Stroke Upper Slide ength Single Deep Thickness idth ength Installation eight Suggested fork Set of two SD250X130 T 130 mm 250 mm 230 mm 1600 mm US 1600 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 50 m/min Acceleration without load 1 m/s 2 Deflection 12 mm 21
SINGE DEEP SD274 This product has the same technical characteristic of the other SD forks. ith its increased forks dimensions, SD274 forks can handle special heavy loads up to 4000 Kg per set. Each fork can be customized based on Customer s requirements. SD274 products are covered by international patent. Code idth eight SD274X130 274 mm 130 mm SD274X150 274 mm 150 mm ighlights igh reliability and positioning accuracy Optimized dimensions igh inertia / reduced deflection value Common spare parts for SD fork type Completely customizable AS/RS Aerospace application Coil Transfer station Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
S Q T US Example of application Customer data Pallet 1400 X 1400 mm Aisle idth 2100 mm 4000 kg Stroke 1750 mm egend S US T Q Single Deep Stroke Upper Slide ength Single Deep Thickness idth ength Installation eight Suggested fork Set of two SD274X150 T 150 mm 274 mm 250 mm 1500 mm US 1400 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 50 m/min Acceleration without load 1 m/s 2 Deflection 10 mm 23
SINGE DEEP SD300 Thanks to the enhancement performed on previous described SD forks types, and to their proven reliability, Eurofork developed the strongest version of standard SD forks suitable to handle heavy loads. SD300 forks can load up to 4500 kg per set. Each fork can be customized based on Customer s requirements. SD300 products are covered by international patent. Code idth eight SD300X130 300 mm 130 mm SD300X150 300 mm 150 mm ighlights igh reliability and positioning accuracy Optimized dimensions igh inertia / reduced deflection value Common spare parts for SD fork type Completely customizable AS/RS Aerospace application Coil Transfer station Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
S Q T US Example of application Customer data Pallet 2000 X 2000 mm Aisle idth 2400 mm 4500 kg Stroke 2200 mm egend S US T Q Single Deep Stroke Upper Slide ength Single Deep Thickness idth ength Installation eight Suggested fork Set of two SD300X150 T 150 mm 300 mm 250 mm 2000 mm US 2000 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 50 m/min Acceleration without load 1 m/s 2 Deflection 20 mm 25
SINGE DEEP AUTOMOTIVE All the above described SD fork can work in Automotive field, thanks to a dedicated study. Completely geared transmission and special components, allows the forks to perfectly absorb the stresses deriving from car frame handling. These forks are also used in applications where the load is handled in the center of the forks, reducing then fork s component strain. Automotive forks code is characterized by A suffix at the end of complete dimension code name. Each fork can be customized based on Customer s requirements. Code idth eight SD180X85A 180 mm 85 mm SD200X100A 200 mm 100 mm SD200X130A 200 mm 130 mm SD250X150A 250 mm 150 mm Eurofork s automotive forks are covered by international patent. ighlights igh reliability and positioning accuracy Completely geared transmission Optimized dimensions igh inertia / reduced deflection value Common spare parts for SD fork type Completely customizable Automotive Special handling Transfer station Additions ift system Variable Fork to Fork distance www.eurofork.com
Example of application Customer data Skid dimensions 2000 X 1600 mm Aisle idth 2800 mm 800 kg Stroke 2400 mm egend S US T Q Single Deep Stroke Upper Slide ength Single Deep Thickness idth ength Installation eight Suggested fork Set of two SD200x130A T 130 mm 225 mm 231 mm 2000 mm US 1600 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 50 m/min Acceleration without load 1 m/s 2 Deflection 13 mm 27
SINGE DEEP - DOUBE DEEP MINIOAD FORKS SD200 & DD220 & DD225 Telescopic forks belonging to this family are used to handle small storage units, such as plastic or cardboard boxes. M letter in the fork s code means miniload : the maximum load of these forks is 150 kg. The reduced vertical dimensions (32 or 40 mm in single deep and 60 or 80 mm in double deep) of the forks makes them extremely versatile. These forks differ from the next miniload models (SD120, SD130) for their reduced vertical dimensions. Each fork can be customized based on Customer s requirements. SD200, DD220 and DD225 product are covered by international patent. Code idth eight SD200X32M 200 mm 32 mm SD200X40M 200 mm 40 mm DD220X31X60M 220 mm 60 mm DD225X42X80M 225 mm 80 mm ighlights igh reliability and positioning accuracy Small size and lightweight Reduced deflection value Reduced cycle times ower noise level during operations Completely customizable Miniload AS/RS AGV GV Additions Belts ift system www.eurofork.com
S Q T US Example of application Customer data Box dimensions 600 X 400 mm Aisle idth 800 mm 50 kg Stroke 700 mm egend S US T Q Single Deep Stroke Upper Slide ength Single Deep Thickness idth ength Installation eight Suggested fork Set of one SD200X32M T 32 mm 200 mm 100 mm 700 mm US 600 mm Speed with load 50 m/min Acceleration with load 2 m/s 2 Speed without load 80 m/min Acceleration without load 3 m/s 2 Deflection 4 mm 29
SINGE DEEP SD120 & SD130 SD120 and SD130 forks model are used to handle small storage units, such as plastic or cardboard boxes with a maximum weight of 300 kg (on two forks). These forks differs from other miniloads forks for the reduced width of their mobile parts. They can reach an high acceleration to significantly reduce the cycle time. Each fork can be customized based on Customer s requirements. SD120 and SD130 products are covered by international patent. Code idth eight SD120X48 120 mm 48 mm SD120X58 120 mm 58 mm SD130X70 130 mm 70 mm ighlights igh reliability and positioning accuracy Small size and lightweight Reduced deflection value Reduced cycle times ower noise level during operations Completely customizable Miniload AS/RS AGV GV Additions Belts ift system Variable Fork to Fork distance www.eurofork.com
Example of application Customer data oad dimensions 800 X 800 mm Aisle idth 1000 mm 300 kg Stroke 900 mm egend S US T Q Single Deep Stroke Upper Slide ength Single Deep Thickness idth ength Installation eight Suggested fork Set of two SD120X58 T 58 mm 120 mm 150 mm 900 mm US 800 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 60 m/min Acceleration without load 2 m/s 2 Deflection 8 mm 31
MÖE SYSTEM 1 BOX MÖE COMPACT S Eurofork reinvented its old Mowe system. Thanks to reduced dimensions and its lightness, this new device is indicated in case of miniload systems to handle plastic or carton boxes on shelving racks in automatic warehouses. This solution has been developed to handle a box with a width ranging from 200 mm to 800 mm and a maximum weight of 80 kg. This equipment is strictly linked to storage units dimensions, as well as to their weight and materials. Eurofork has a solutions for every kind of box: this product is studied to automatically detect the length of the box. Each device can be customized based on Customer s requirements. ighlights igh reliability and positioning accuracy Box length automatic detection Small size and lightweight igh speed Completely customizable Miniload AS/RS AGV GV Additions Belts Variable Fork to Fork distance www.eurofork.com
Example of application Customer data Box dimensions 600 X 400 mm Aisle idth 790 mm 25 kg Stroke 770 mm egend S Stroke US Upper Slide ength T Single Deep Thickness Distance between mobile parts 1 Total device width ength Mobile Parts eight 1 Installation eight Suggested device Set of one MÖE COMPACT S T 40 mm 430 mm 1 920 mm 205 mm 1 288 mm 690 mm US 690 mm Speed with load 80 m/min Acceleration with load 2,6 m/s 2 Speed without load 100 m/min Acceleration without load 4 m/s 2 33
MÖE SYSTEM 2 BOXES MÖE COMPACT D This solution has been developed to handle two boxes at the same time with a width ranging from 200 to 800 mm and a maximum weight of 150 kg. Thanks to reduced dimensions and its lightness, this new system is indicated in case of miniload systems to handle plastic or carton boxes on shelving racks in automatic warehouses. This equipment is strictly linked to storage units dimensions, as well as to their weight and materials. Eurofork has a solutions for every kind of box: this product is studied to automatically detect the length of the box. Each device can be customized based on Customer s requirements. ighlights igh reliability and positioning accuracy Small size and lightweight igh speed Box length automatic detection Completely customizable Miniload AS/RS AGV GV Additions Belts Variable Fork to Fork distance www.eurofork.com
S1 T S2 US 1 1 Example of application Customer data Box dimensions 600 X 400 mm Aisle idth 1510 mm 50 + 50 kg Stroke S1 720 mm Stroke S2 1390 mm egend S1 Single Deep Stroke S2 Double Deep Stroke US Upper Slide ength T Single Deep Thickness Distance between mobile parts 1 Total device width ength Mobile Parts eight 1 Installation eight Suggested device Set of one MÖE COMPACT D T 43 mm 430 mm 242 mm 1410 mm US 1410 mm Speed with load 50 m/min Acceleration with load 0,7 m/s 2 Speed without load 100 m/min Acceleration without load 3 m/s 2 35
DOUBE DEEP DD160 This type of Double deep forks has been developed to offer the best solution to handle storage units with a small forks. Despite its small dimensions, this type of forks can handle storage units in double deep up to 800 kg on a complete set of forks. Each fork can be customized based on Customer s requirements. DD160 forks are covered by international patent. Code idth eight SD eight DD DD160X65X140 160 mm 140 mm 140 mm SD: Single Deep DD: Double Deep ighlights Reduced deflection value igh reliability and positioning accuracy Common spare parts for DD fork type Completely customizable Small size and lightweight AS/RS AGV GV Transfer station Additions Belts Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
Example of application egend Customer data Pallet Aisle idth Stroke S1 Stroke S2 Suggested fork Set of two DD160X65X140 600 X 800 mm 1000 mm 800 kg 800 mm 1500 mm S1 S2 US T1 T2 Q Single Deep Stroke Double Deep Stroke Upper Slide ength Single Deep Thickness Double Deep Thickness idth ength Installation eight T1 65 mm T2 140 mm 160 mm 250 mm 800 mm US 800 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 60 m/min Acceleration without load 1,5 m/s 2 Deflection S1 2 mm Deflection S2 13 mm 37
DOUBE DEEP VARIANT TYPE DD160V This type of double deep fork has been developed to offer the best solution to handle storage units with a small fork. Compared to the previous solution (DD160), Variant forks have two geared motors: the first one is used to perform single deep stroke with two slides only, while the other geared motor operates for Double Deep with three slides. Each fork can be customized based on Customer s requirements. DD160V forks are covered by international patent. Code idth eight SD eight DD DD160X65X140V 160 mm 65 mm 140 mm SD: Single Deep DD: Double Deep ighlights Completely customizable Small size and lightweight Reduced deflection value igh reliability and positioning accuracy Common spare parts for DD fork type AS/RS AGV GV Transfer station Additions Belts Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
Example of application egend Customer data Pallet Aisle idth Stroke S1 Stroke S2 Suggested fork Set of two DD160X65X140V 600 X 800 mm 1000 mm 800 kg 800 mm 1500 mm S1 S2 US T1 T2 Q Single Deep Stroke Double Deep Stroke Upper Slide ength Single Deep Thickness Double Deep Thickness idth ength Installation eight T1 65 mm T2 140 mm 160 mm 250 mm 800 mm US 800 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 60 m/min Acceleration without load 1,5 m/s 2 Deflection S1 3 mm Deflection S2 13 mm 39
DOUBE DEEP DD175 DD175 forks family are used for double deep loads handling. These forks are particularly suitable to handle EPA or similar loads up to 1500 kg. Thanks to their special construction materials, these products are also suitable to operate at temperatures of up to 28 Celsius degrees (-18 F). Each fork can be customized based on Customer s requirements. DD175 forks are covered by international patent. Code idth eight SD eight DD DD175X68X165 175 mm 165 mm 165 mm DD175X70X167 175 mm 167 mm 167 mm SD: Single Deep DD: Double Deep ighlights igh reliability and positioning accuracy Optimized dimensions for EPA handling Operating up to -28 C (-18 F) Completely customizable EPA AS/RS Freezer Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
Example of application egend Customer data Pallet Aisle idth Stroke S1 Stroke S2 Suggested fork Set of two DD175X70X167 800 X 1200 mm 1600 mm 1500 kg 1400 mm 2700 mm S1 S2 US T1 T2 Q Single Deep Stroke Double Deep Stroke Upper Slide ength Single Deep Thickness Double Deep Thickness idth ength Installation eight T1 70 mm T2 167 mm 175 mm 250 mm 1450 mm US 1200 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 60 m/min Acceleration without load 1 m/s 2 Deflection S1 12 mm Deflection S2 70 mm 41
DOUBE DEEP VARIANT TYPE DD175V Code idth eight SD eight DD DD175X68X165V 175 mm 68 mm 165 mm DD175X70X167V 175 mm 70 mm 167 mm DD175V fork are used for double deep pallets handling. Double deep Variant forks have been designed to handle EPA up to 1500 kg. This option allows a more efficient organization of the warehouse thanks to an optimal positioning of the pallets, avoiding the use of steel tops. Thanks to their special construction materials, these products are also suitable to operate at temperatures of up to 28 Celsius degrees (-18 F). Each fork can be customized based on Customer s requirements. DD175V forks are covered by international patent. SD: Single Deep DD: Double Deep ighlights igh reliability and positioning accuracy Small size and lightweight Reduced deflection value Common spare parts for SD fork type Completely customizable EPA AS/RS Freezer Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
Example of application Customer data Pallet Aisle idth Stroke S1 Stroke S2 Suggested fork Set of two DD175X70X167V 800 X 1200 mm 1600 mm 1500 kg 1400 mm 2700 mm T1 70 mm T2 167 mm 175 mm 280 mm 1450 mm US 1200 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 60 m/min Acceleration without load 1 m/s 2 Deflection S1 21 mm Deflection S2 70 mm egend S1 S2 US T1 T2 Q Single Deep Stroke Double Deep Stroke Upper Slide ength Single Deep Thickness Double Deep Thickness idth ength Installation eight 43
DOUBE DEEP DD180 Code idth eight SD eight DD DD180X71X172 180 mm 172 mm 172 mm DD180X75X175 180 mm 175 mm 175 mm DD180X80X182 180 mm 182 mm 182 mm DD180 forks are the reinforced version of DD175 forks. These forks are equipped with only one geared motor which moves the three slides simultaneously, both in single and in double deep stroke. These forks have been designed to handle pallets or other loads with a maximum weight of 1800 kg pallets. DD180 forks are especially useful when the ratio between the stroke and the length of the fork is too high for a DD175 fork or when it is necessary to have a smaller deflection. Each fork can be customized based on Customer s requirements. DD180 forks are covered by international patent. SD: Single Deep DD: Double Deep ighlights igh reliability and positioning accuracy Optimized dimensions igh inertia / reduced deflection value Common spare parts for DD fork type AS/RS Transfer station Aerospace application Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
Example of application egend Customer data Pallet Aisle idth Stroke S1 Stroke S2 Suggested fork Set of two DD180X80X182 800 X 1200 mm 1600 mm 1800 kg 1400 mm 2700 mm S1 S2 US T1 T2 Q Single Deep Stroke Double Deep Stroke Upper Slide ength Single Deep Thickness Double Deep Thickness idth ength Installation eight T1 80 mm T2 182 mm 180 mm 250 mm 1400 mm US 1200 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 60 m/min Acceleration without load 1 m/s 2 Deflection S1 8 mm Deflection S2 50 mm 45
DOUBE DEEP VARIANT TYPE DD180V Variant forks DD180V have been designed and developed to handle loads stored in two lines, indeed, with their three slides, these forks can perform high strokes. These forks can handle pallets or other loads with a maximum weight of 1800 kg. Variant Forks have two geared motors: the first one is used to perform single deep strokes with two slides only, while the other geared motor operates for double deep strokes with the forks three slides. Each fork can be customized based on Customer s requirements. DD180V forks are covered by international patent. Code idth eight SD eight DD DD180X71X172V 180 mm 71 mm 172 mm DD180X75X175V 180 mm 75 mm 175 mm DD180X80X182V 180 mm 80 mm 182 mm SD: Single Deep DD: Double Deep ighlights igh reliability and positioning accuracy Optimized dimensions igh inertia / reduced deflection value Common spare parts for DD fork type AS/RS Transfer station Aerospace application Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
Example of application Customer data Pallet Aisle idth Stroke S1 Stroke S2 Suggested fork Set of two DD180X80X182V 800 X 1200 mm 1600 mm 1800 kg 1400 mm 2700 mm T1 80 mm T2 182 mm 180 mm 250 mm 1400 mm US 1200 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 60 m/min Acceleration without load 1 m/s 2 Deflection S1 15 mm Deflection S2 50 mm egend S1 S2 US T1 T2 Q Single Deep Stroke Double Deep Stroke Upper Slide ength Single Deep Thickness Double Deep Thickness idth ength Installation eight 47
DOUBE DEEP DD210 & DD220 DD210 and DD220 forks are the strongest version of the other forks and are mainly used for double deep pallet handling. These forks are used when the ratio between stroke and length of the fork is too high for other DD family forks or when it is necessary to have a smaller deflection. These forks can handle loads with a maximum weight of 2500 kg. Each fork can be customized based on Customer s requirements. DD210 and DD220 forks are covered by international patent. Code idth eight SD eight DD DD210X85X200 210 mm 200 mm 200 mm DD220X110X250 220 mm 250 mm 250 mm SD: Single Deep DD: Double Deep ighlights igh reliability and positioning accuracy Optimized dimensions Common spare parts for DD fork type Completely customizable igh inertia / reduced deflection value AS/RS Coils Transfer station Aerospace application Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
Example of application Customer data Pallet Aisle idth Stroke S1 Stroke S2 Suggested fork Set of two DD220X110X250 1200 X 1200 mm 1650 mm 2500 kg 1425 mm 2425 mm T1 110 mm T2 250 mm 220 mm 440 mm 1450 mm US 1200 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 60 m/min Acceleration without load 1 m/s 2 Deflection S1 3 mm Deflection S2 18 mm egend S1 S2 US T1 T2 Q Single Deep Stroke Double Deep Stroke Upper Slide ength Single Deep Thickness Double Deep Thickness idth ength Installation eight 49
DOUBE DEEP VARIANT TYPE DD210V & DD220V DD210V and DD220V models are the strongest Variant forks solution, equipped with two geared motors that permit either the movement of the last two slides for the single deep stroke or the movement of all three slides to achieve the double deep stroke. These forks can handle loads up to 2500 kg per set. Each fork can be customized based on Customer s requirements. DD210V and DD220V forks are covered by international patent. Code idth eight SD eight DD DD210X85X200V 210 mm 85 mm 200 mm DD220X110X250V 220 mm 110 mm 250 mm SD: Single Deep DD: Double Deep ighlights igh reliability and positioning accuracy Optimized dimensions Common spare parts for DD fork type Completely customizable igh inertia / reduced deflection value AS/RS Coils Transfer station Aerospace applications Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
Example of application Customer data Pallet Aisle idth Stroke S1 Stroke S2 Suggested fork Set of two DD220X110X250V 1200 X 1200 mm 1650 mm 2500 kg 1425 mm 2425 mm T1 110 mm T2 250 mm 220 mm 440 mm 1450 mm US 1200 mm Speed with load 30 m/min Acceleration with load 0,5 m/s 2 Speed without load 60 m/min Acceleration without load 1 m/s 2 Deflection S1 7 mm Deflection S2 18 mm egend S1 S2 US T1 T2 Q Single Deep Stroke Double Deep Stroke Upper Slide ength Single Deep Thickness Double Deep Thickness idth ength Installation eight 51
SPECIA PRODUCTS SD370 The continuous market demand to increase loads, weight, dimensions and, at the same time, to reduce the deflection values, has driven Eurofork to constantly innovate its range of products. SD370 fork, with its huge inertia and large diameter of the camfollowers, is able to handle 7000 kg with a very reduced deflection. Eurofork has also succeed in satisfying the big load handling requirements: more than 4 meters long telescopic forks has been produced to handle such loads with an high stability. Each fork can be customized based on Customer s needs. Code idth eight SD370X180 370 mm 180 mm SD370 products are covered by international patent. ighlights igh reliability and positioning accuracy eavy loads handling Reduced deflection value Common spare parts for SD fork type Completely customizable AS/RS Aerospace Coils Transfer station Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
SD220 & SD280 & SD300 These type of fork are one of the most complex with very strict requirements in terms of reliability and precision. Eurofork s systems satisfy special parameters. Eurofork can develop any kind of combination between telescopic forks and lifting systems for AGV, RGV or similar applications. This product can handle 7000 kg with a very reduced deflection and dimensions. Each fork can be customized based on Customer s needs. SD220, SD280 and SD300 are covered by international patent. Code idth eight SD220X215 220 mm 215 mm SD280X330 280 mm 330 mm SD300X250 300 mm 250 mm ighlights igh reliability and positioning accuracy Small size Reduced deflection value Completely customizable AS/RS Aerospace AGV RGV Additions Chain Conveyor ift system Variable Fork to Fork Distance 53
SPECIA PRODUCTS SD114 SD114X220 is a special product designed to meet specific needs in case of reduced pick-up space and high loads. This is possible thanks to the small sizes of the slide (114 mm wide and 220 mm height). SD114X220 can handle storage units of up to 2500 kg on each fork. Each fork can be customized based on Customer s needs. SD114X220 products are covered by international patent. Code idth eight SD114X220 114 mm 220 mm ighlights igh reliability and positioning accuracy Small size Reduced deflection value Completely customizable AS/RS Trays eavy loads application Transfer station Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
SD150 SD150 is a special product designed to meet specific needs in case of reduced pick-up space and high loads. This is possible thanks to the small sizes of the sliders (150 mm wide and 220 or 280 mm height). SD150 can handle storage units of up to 3000 kg on each fork. T letter at the end of the code refers to the structure of the upper slide. Each fork can be customized based on Customer s needs. SD150 products are covered by international patent. Code idth eight SD150X220T 150 mm 220 mm SD150X280T 150 mm 280 mm ighlights igh reliability and positioning accuracy Small size Reduced deflection value Completely customizable AS/RS Coils Transfer station Additions Chain Conveyor ift system Variable Fork to Fork Distance 55
SPECIA PRODUCTS DD350 DD350 forks are suitable for both large and thin double deep forks. Slides are 350 mm wide and their total thickness is equal to 120 mm. The minimum length of this fork is about 1500 mm and it can handle up to 1500 kg. As usual this value is influenced by the stroke/length ratio. Each fork can be customized based on Customer s needs. DD350 products are covered by international patent. Code idth eight SD eight DD DD350X90X120 350 mm 120 mm 120 mm SD: Single Deep DD: Double Deep ighlights igh reliability and positioning accuracy Small vertical size Reduced deflection value Close pallet handling Completely customizable AS/RS Transfer station Additions Chain Conveyor ift system www.eurofork.com
DD520 & DD600 These forks can handle loads up to 2000 kg (each fork) in double deep warehouses. Such devices are used in several applications mainly in open shelves or when it is necessary to handle close pallet. This device is mainly used as a mono-fork thanks to the considerable width of the upper slide (600 mm) and with an height of only 140 mm in DD520 and 200 mm in DD600. Each fork can be customized based on Customer s needs. DD520 and DD600 are covered by international patent. Code idth eight SD eight DD DD520X110X140 520 mm 140 mm 140 mm DD600X150X200 600 mm 200 mm 200 mm SD: Single Deep DD: Double Deep ighlights igh reliability and positioning accuracy Small vertical size Reduced deflection value Close pallet handling Completely customizable AS/RS Transfer station Additions Chain Conveyor ift system 57
SPECIA PRODUCTS TD175X229 TD175X229 is a special product equipped with four slides that make possible to use this equipment in case the ratio between length and stroke exceeds the normal parameters or reduced deflection request. ith its 229 mm height and 175 mm width, this model can handle loads up to 1000 kg with considerable strokes. Each fork can be customized based on Customer s needs. TD175X229 is covered by international patent. Code idth eight SD eight DD eight TD TD175X229 175 mm 229 mm 229 mm 229 mm SD: Single Deep DD: Double Deep TD: Triple Deep ighlights igh reliability and positioning accuracy Reduced deflection value Completely customizable AS/RS Additions Chain Conveyor ift system Variable Fork to Fork distance www.eurofork.com
TO SQUARED FORK Two Squared Fork is the solution for quadruple deep load handling. This device can simultaneously handle two pallets of 2000 kg each in first and second deep position, or only one pallet of max. 2000 kg in third position or max. 1500 kg in fourth position. The system can work in combination with two chain conveyors that arrange the position of the loads on board. This solution is ideal to reduce the number of cranes needed in an automated warehouse. Each fork can be customized based on Customer s needs. Two Squared Fork is covered by international patent. ighlights igh reliability and positioning accuracy Small vertical size Reduced deflection value Close pallet handling Completely customizable AS/RS Additions Chain Conveyor 59
SPECIA PRODUCTS COI FORKS To handle coils, standard forks are equipped with special supports mounted on the upper slides. Alternatively, it is possible tilt the entire equipment by means of suitable supports in order to optimize the contact surface allowing a better distribution of the stresses. In presence of storage units with different diameters, it is possible to optimize such supports to ensure optimal force distribution. Each fork can be customized based on Customer s needs. ighlights igh reliability and positioning accuracy Small size and lightweight Reduced deflection value Common spare parts for SD-DD fork type Completely customizable AS/RS AGV GV Coils Additions ift system www.eurofork.com
CRITICA ENVIRONMENTS FORKS Eurofork gained a great deal of experience over the years in various industrial fields, and is able to deal with different situations, from critical environmental conditions to a variety of loads. In the case of high humidity environments, our devices are developed by selecting suitable materials such as aluminium and highstrength stainless steel to protect the equipment from corrosion and wear and tear. Eurofork has a long experience in high temperature loads handling (up to 400 C), including loads directly picked up from furnaces. Special insulators are used to protect fork components from the heat flow. Each fork can be customized based on Customer s needs. ighlights igh reliability and positioning accuracy Small size and lightweight Reduced deflection value Covered for critical environments Completely customizable AS/RS AGV GV Critical environments Additions Belts Chain Conveyor ift system Variable Fork to Fork Distance 61
ADDITIONS IFT SYSTEMS ift system allows load handling in case of forks mounted on shuttles, AGVs, GVs or other similar applications without a lifting function. Eurofork produces a wide range of lifting systems customized base on loading unit weights; this solution can be installed in each forks device. The maximum vertical stroke of a lift can vary accordingly to each device, since the maximum value is linked to the loading unit. Its standard vertical stroke is 100 mm but we can also customize it till 350mm. Each system can be customized based on Customer s needs. ighlights igh reliability and positioning accuracy Completely customizable AGV GV Transfer stations www.eurofork.com
VARIABE FORK TO FORK DISTANCE Variable fork to fork distance is a system that allows to adjust the distance between the forks. This system is particularly useful in warehouses where it is needed to manage loads with different sizes. Through a slight modification of the fixed body, all Eurofork forks can be integrated with this system. The distance between forks variation does not compromise the duration of equipment working cycle. Each system can be customized based on Customer s needs. ighlights igh reliability and positioning accuracy Completely customizable AS/RS AGV GV Transfer station 63
ADDITIONS BET SYSTEMS Belt systems enable load handling without moving the forks. This features is used for light storage units. Eurofork also produces solutions with double belt systems that allow the separate and independent management of two storage units without need moving the forks. Each system can be customized based on Customer s needs. ighlights igh reliability and positioning accuracy Small size and lightweight Completely customizable Miniload AS/RS AGV GV www.eurofork.com
CAIN SYSTEMS Chain systems allow the handling of heavier loads than the belt systems. This equipment provided with chains is used for the management of storage units with weights of up to 1500 kg and allows the load deposit and collect in the bay without moving the forks. The chain systems require the use of a dedicated lifting unit integrated with the equipment. Each system can be customized based on Customer s needs. ighlights igh reliability and positioning accuracy Completely customizable AS/RS AGV GV Transfer station 65
SUTTE SYSTEMS ESMARTSUTTE ighlights Absolute positioning Simultaneous independent missions Full battery option available Fast start-up Increased energy saving ayout flexibility ESMARTSUTTE system is the patented solution ideal for high density storage particularly suitable for those warehouses to be built into pre-existing buildings. Thanks to the system s flexibility, eventual constrains such as vertical limits, presence of pillars or irregular layouts, can be easily managed, as well as both the IFO (ast In First Out) and FIFO (First In First Out) logics. Thanks to the DataMatrix technology, the warehouse is mapped in all its axis (X, Y, Z), allowing the absolute and continuous positioning of all its contents (machines and pallets). The innovative consequence is the possibility to independently move each machine in the warehouse: Shuttle (bigger cart) and Satellite (smaller cart) can perform two simultaneous missions increasing system s performances. ESMARTSUTTE system has been covered by International Patent PCT/ IB2014/060649. AS/RS Additions Chain Conveyor www.eurofork.com
STACKERSAT To offer a complete range of products to System lntegrators, Eurofork has developed a shuttle ideal for those warehouses where stacker crane is still the most suitable solution. To guarantee the stability of the Storage Unit during the transfer between machines and rack, StackerSAT has 8 wheels drive. Power supply is provided by 48V latest generation lithium battery which can guarantee 24/7 operations thanks to charging stations positioned on the stacker crane s frame. lt is not required to replace the discharged battery neither to stop the machine for recharge [that usually takes place in masked time]. One of the main features of the system is the use of components characterized by high level of reliability and worldwide availability. This choice, combined with a strong standardization, makes easy and economical the machines maintenance. ighlights Absolute positioning Simultaneous independent missions Fast start-up Increased energy saving ayout flexibility AS/RS AGV 67
Eurofork S.r.l. 19, Via Battitori 10060 Macello (TO) Italy +39 0121 33 90 03 eurofork@eurofork.com www.eurofork.com All Eurofork products are made in Italy