MATERIAL SAFETY DATA SHEET Product Trade Name: Revision Date: 31-Aug-2007 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product Trade Name: Synonyms: Chemical Family: Application: Manufacturer/Supplier Prepared By None Polymer Additive Baroid Fluid Services Product Service Line of Halliburton P.O. Box 1675 Houston, TX 77251 Telephone: (281) 871-4000 Emergency Telephone: (281) 575-5000 Chemical Compliance Telephone: 1-580-251-4335 e-mail: fdunexchem@halliburton.com 2. COMPOSITION/INFORMATION ON INGREDIENTS SUBSTANCE CAS Number PERCENT ACGIH TLV-TWA OSHA PEL-TWA Anionic polyacrlyamide PROPRIETARY 60-100% Not applicable Not applicable 3. HAZARDS IDENTIFICATION Hazard Overview No significant hazards expected. 4. FIRST AID MEASURES Inhalation Skin Eyes Ingestion Notes to Physician If inhaled, remove from area to fresh air. Get medical attention if respiratory irritation develops or if breathing becomes difficult. Wash with soap and water. Get medical attention if irritation persists. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes and get medical attention if irritation persists. Under normal conditions, first aid procedures are not required. Not Applicable Page 1 of 6
5. FIRE FIGHTING MEASURES Flash Point/Range (F): Flash Point/Range (C): Flash Point Method: Autoignition Temperature (F): Autoignition Temperature (C): Flammability Limits in Air - Lower (%): Flammability Limits in Air - Upper (%): Fire Extinguishing Media Special Exposure Hazards All standard firefighting media. Decomposition in fire may produce toxic gases. Organic dust in the presence of an ignition source can be explosive in high concentrations. Good housekeeping practices are required to minimize this potential. Special Protective Equipment for Fire-Fighters Full protective clothing and approved self-contained breathing apparatus required for fire fighting personnel. NFPA Ratings: Health 0, Flammability 1, Reactivity 0 HMIS Ratings: Flammability 1, Reactivity 0, Health 0 6. ACCIDENTAL RELEASE MEASURES Personal Precautionary Measures Use appropriate protective equipment. Slippery when wet. Environmental Precautionary Measures Procedure for Cleaning / Absorption Prevent from entering sewers, waterways, or low areas. Scoop up and remove. 7. HANDLING AND STORAGE Handling Precautions Storage Information Avoid contact with eyes, skin, or clothing. Avoid creating or inhaling dust. Slippery when wet. Store away from oxidizers. Store in a cool, dry location. Keep container closed when not in use. Keep from excessive heat. Product has a shelf life of 60 months. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering Controls Respiratory Protection Use in a well ventilated area. Not normally necessary. Hand Protection Skin Protection Eye Protection Other Precautions Normal work gloves. Normal work coveralls. Wear safety glasses or goggles to protect against exposure. 9. PHYSICAL AND CHEMICAL PROPERTIES Physical State: Powder Page 2 of 6
9. PHYSICAL AND CHEMICAL PROPERTIES Color: White to yellow Odor: Odorless ph: 7-9 (5%) Specific Gravity @ 20 C (Water=1): 0.75-0.95 Density @ 20 C (lbs./gallon): Bulk Density @ 20 C (lbs/ft3): 48-55 Boiling Point/Range (F): 219 Boiling Point/Range (C): 103 Freezing Point/Range (F): Freezing Point/Range (C): Vapor Pressure @ 20 C (mmhg): Vapor Density (Air=1): Percent Volatiles: 8-13 Evaporation Rate (Butyl Acetate=1): Solubility in Water (g/100ml): Soluble Solubility in Solvents (g/100ml): VOCs (lbs./gallon): Viscosity, Dynamic @ 20 C (centipoise): Viscosity, Kinematic @ 20 C (centistrokes): Partition Coefficient/n-Octanol/Water: Molecular Weight (g/mole): 10. STABILITY AND REACTIVITY Stability Data: Hazardous Polymerization: Conditions to Avoid Incompatibility (Materials to Avoid) Hazardous Decomposition Products Additional Guidelines Stable Will Not Occur None anticipated Strong oxidizers. Prolonged contact with aluminum. Contact with copper. Contact with iron. Oxides of nitrogen. Ammonia. Carbon monoxide and carbon dioxide. Not Applicable 11. TOXICOLOGICAL INFORMATION Principle Route of Exposure Inhalation Skin Contact Eye Contact Ingestion Aggravated Medical Conditions Chronic Effects/Carcinogenicity Other Information Eye and skin contact. Not irritating to skin in rabbits. Non-irritating to rabbit's eye None known No data available to indicate product or components present at greater than 1% are chronic health hazards. Toxicity Tests Oral Toxicity: Page 3 of 6
Dermal Toxicity: Inhalation Toxicity: Primary Irritation Effect: Carcinogenicity Genotoxicity: Reproductive / Developmental Toxicity: 12. ECOLOGICAL INFORMATION Mobility (Water/Soil/Air) Persistence/Degradability Bio-accumulation Ecotoxicological Information Acute Fish Toxicity: LC50: (96 hour) 180 mg/l (Lepomis macrochirus) TLM96: 130 mg/l (Oncorhynchus mykiss) Acute Crustaceans Toxicity: Acute Algae Toxicity: Chemical Fate Information Other Information Not applicable 13. DISPOSAL CONSIDERATIONS Disposal Method Contaminated Packaging Bury in a licensed landfill according to federal, state, and local regulations. Follow all applicable national or local regulations. 14. TRANSPORT INFORMATION Land Transportation DOT Not restricted Canadian TDG Not restricted ADR Not restricted Air Transportation ICAO/IATA Not restricted Sea Transportation Page 4 of 6
IMDG Not restricted Other Shipping Information Labels: None 15. REGULATORY INFORMATION US Regulations US TSCA Inventory EPA SARA Title III Extremely Hazardous Substances EPA SARA (311,312) Hazard Class EPA SARA (313) Chemicals EPA CERCLA/Superfund Reportable Spill Quantity EPA RCRA Hazardous Waste Classification California Proposition 65 MA Right-to-Know Law NJ Right-to-Know Law PA Right-to-Know Law All components listed on inventory. Not applicable None This product does not contain a toxic chemical for routine annual "Toxic Chemical Release Reporting" under Section 313 (40 CFR 372). Not applicable. If product becomes a waste, it does NOT meet the criteria of a hazardous waste as defined by the US EPA. All components listed do not apply to the California Proposition 65 Regulation. Does not apply. Does not apply. Does not apply. Canadian Regulations Canadian DSL Inventory WHMIS Hazard Class All components listed on inventory. Un-Controlled 16. OTHER INFORMATION The following sections have been revised since the last issue of this MSDS Not applicable Additional Information For additional information on the use of this product, contact your local Halliburton representative. For questions about the Material Safety Data Sheet for this or other Halliburton products, contact Chemical Compliance at 1-580-251-4335. Disclaimer Statement This information is furnished without warranty, expressed or implied, as to accuracy or completeness. The information is obtained from various sources including the manufacturer and other third party sources. The information may not be valid under all conditions nor if this material is used in combination with other materials or in any process. Final determination of suitability of any material is the sole responsibility of the user. Page 5 of 6
***END OF MSDS*** Page 6 of 6