Mounting systems Flat roof for the loading-optimized elevation (adhesive system) FLAMONT Production I Professional wholesale
Adhesive mounting without roof penetration no weight easy to install low price flexible no roof penetration Liquid plastic (Widocryl-Point) patented system for non-penetrating individual inclination (15, 20, 25 ) modular system for individual project no ballast, complete only 14 kg/m² Foto: Widopan stable system with project-based structural analysis report suitable for almost all of the slides and bitumen roofs no point load temperature and UV-resistant especially suitably for industrial halls with lightweight construction flat roofs easy mounting (pre-assembled mounting system) obstacles modular changeable used throughout Europe quality management according to DIN ISO 9001:2008 Competence own personal with the best education Producer qualification welding of structural steel components in accordance with DIN 18800-7 and welding of structural aluminum components according to DIN 4113-3 Full-Service planing, project engineering, production detailed checklist project-based offer consulting and training mounting instructions technical approval module and profile rail plan ALTEC Solartechnik AG 05/2011 Mistake and technical changes reserve. Fixing the C-rail Adhesive fastening with elevation angle ALTEC Solartechnik AG Industriegebiet 1 07924 Crispendorf Phone 03663 4210-0 Fax 03663 4210-211 info@altec-solartechnik.de www.altec-solartechnik.de
Mounting systems Pitched roof-assembly system ALSD Production I Professional wholesale
The system solution for pitched roofs Roof with shingle roof hooks Base plate Because pitched roofs can have many variations our connection system ALSD has many possible configurations. It can be individually adapted to every roof. In this application, the modules are attached using an aluminium and stainless steel construction above the existing roof covering. The roof remains almost intact and maintains its water-bearing function. The energy yield of the modules is increased by good ventilation: the temperature build-up behind the modules and subsequent heating is reduced. The modular construction of our assembly system enables any required system to be constructed from components that are available as single items. Consisting of aluminium extrusions, stainless steel connections and specially designed roof fixings, our system offers a high degree of flexibility in its design and application. Our mounting solutions are geared to the specific requirements on pitched roofs caused by the condition of the roof structure and the roof pitch. Individual designs for a variety of pitched roofs are possible. The high quality and durability of our products and the simple assembly of our systems characterises our company. To guarantee the optimum exploitation of available roof space and to maximise efficiency, we offer an exact planning service. This contains the precise analysis, profit predictions and static load calculations of the complete system. Pantile roof hook vertical assembly horizontal assembly individually planned arrangement
Roof roofing cut Assembly with roof hooks insert the roof hook To make an enquiry complete our Check List for Assembly Systems. It helps capture all of the important data from which we will create your individual offer. Profile rails 40 x 40 mm and pan tiled roof hook, hammer head screws including washer and nuts Advantages optimized for all common roofs quick and easy assembly very cost effective corrosion resistance due to the use of stainless steel compatible with all of our components for pitched roofs statistically calculated construction data comprehensive service to calculate performance prior to assembly Dowel screw for the connection of arrangements on trapezoidal roofings or wave roofings. Profile rails 40 x 40 mm and solar fastenings for corrugated eternit, with self- tapping thread, adapter plate, hammer head screws, washers and nuts Construction with pan tiled roof hooks
Altec Solartechnik AG 05/2011 Mistake and technical changes reserve. ALTEC Solartechnik AG Industriegebiet 1 07924 Crispendorf Phone 03663 4210-0 Fax 03663 4210-211 info@altec-solartechnik.de www.altec-solartechnik.de
Mounting systems Trapezoidal roof mounting system ALSD for trapezoidal mounting Production I Professional wholesale
Static safety on trapezoidal roofs elevated modules roof-parallel assembly ALTEC Solartechnik AG has developed a special mounting system for the mounting of photovoltaic systems on trapezoidal roofs. Two mounting types are available: the trapezoidal metal shoe or our new flexible trapezoidal roof fixing. With the trapezoidal metal shoe the trapezoidal metal profile is surrounded by the shoe which is fastened using four self-drilling screws. We have standard size shoes and we also custom make the shoes to fit the customer s requirements. The shoes are made from high-grade steel material and provide the highest security, longevity and stability. In addition, the best possible transference of force to the roof is guaranteed by the relatively large surface area of the shoe. When using the trapezoidal metal shoe there is a choice of attachment such as threaded bolt, bar, plate or angle. We will calculate the ideal solution for your arrangement. The advantage of the flexible trapezoidal roof mounting is that it can be fitted to trapezoidal roofs of different profile dimensions. This allows this mounting system to be used universally on all trapezoidal roofs. If the roof has a sufficient pitch, then the direct mounting of the rails on the trapezoidal mounting is possible. On flatter roofs the use of an elevation angle will bring the modules to the ideal position and provide the most efficient arrangement of the PV modules. elevation angle Trapezoidal metal shoe with a mounting profile Trapezoidal roof assembly with C-rail and trapezoidal metal shoes with different attachments
For our elevations, we use angle aluminum profiles that are suitable for use in all wind and snow load zones. Their rigid construction ensures very high stability. For each order of elevations we will consider the connection elements that are needed, the substructure, the angle of elevation and other parameters like static load, wind and snow loads, as well as the respective trapezoidal metal type. Request your enquiry by completing our Checklist for the Assembly on Trapezoidal Roofs. It helps capture all of the important data from which we will create your individual offer. We are happy to calculate for you the price of a custom trapezoidal shoe or send you a price list of all the standard options offered in our range. Talk to us! To ensure the weather tightness of the roof we install EPDM tape between the roof and the shoe or flexible mounting. Elevation angle for application to the trapezoidal metal shoe Our mounting systems for PV also include solar fastenings that are anchored in the substructure. They transfer the forces to the substructure and, therefore, the weight of the assembly is not transmitted to the thin roof panels. Functioning of the trapezoidal roof fixing Solar Fastenings flexible trapezoidal roof fixing
ALTEC Solartechnik AG 05/2011 Mistake and technical changes reserve. ALTEC Solartechnik AG Industriegebiet 1 07924 Crispendorf Phone 03663 4210-0 Fax 03663 4210-211 info@altec-solartechnik.de www.altec-solartechnik.de