The Ultimate in Corrosion Protection! OCAL-BLUE TM Conduit Hot-dip galvanized steel or aluminum conduit Nominal 0.00 in. ( mils) blue urethane coating on interior Hot-dipped galvanized threads (steel) Minimum 0.00 in. (0 mils) PVC coating on exterior Colour-coded thread protectors Couplings shipped with conduit are packaged separately Steel COND/-_ COND/-_ COND-_ COND-/-_ COND-/-_ COND-_ COND-_ COND-_ COND-_ COND-_ *COND-_ *COND-_ Aluminum COND/SA-_ COND/SA-_ CONDSA-_ COND-/SA-_ COND-/SA-_ CONDSA-_ CONDSA-_ CONDSA-_ CONDSA-_ CONDSA-_ CONDSA-_ CONDSA-_ Metric size designator (ANSI C80.-99). * culus Listed. Pipe Size in. (mm) / () / () (7) -/ () -/ () () () (9) (0) (9) () Outside Diameter 0.8 (.0).0 (.70). (.0). (.0).90 (8.0).8 (0.0).88 (7.00).0 (88.90).00 (0.0).0 (.0). (.0). (8.0) Outside Diameter With PVC 0.9 (.0). (8.70).0 (.0).7 (.0).98 (0.0). (.0).9 (7.00).8 (90.90).08 (0.0).8 (.0). (.0).7 (70.0) Nominal Wall Thickness 0.0 (.) 0. (.7) 0. (.0) 0. (.7) 0. (.0) 0. (.70) 0.9 (.90) 0. (.0) 0. (.) 0. (.7) 0. (.) 0.7 (.7) Nominal Wall Thickness With PVC 0. (.).7 (.7) 0.7 (.) 0.7 (.9) 0.8 (.) 0.9 (.7) 0. (.9) 0. (.) 0. (.7) 0.7 (.7) 0.9 (7.) 0. (7.87) Nominal Inside Diameter 0. (.0) 0.8 (.0).0 (7.00).9 (.0). (.0).08 (.90).9 (.0).09 (78.0).7 (90.70).0 (0.90).07 (8.90).09 (.80) Cross Section Area in Square 0.0 (7.7) 0. (.) 0.8 (.9).0 (7.97).0 (.7). (8.).80 (.) 7.9 (87.80) 9.87 (0.0).7 (.) 0.0 (08.) 8.89 (7.8) Length Without Couplings ft. (m) 9 -/ (.0) 9 -/ (.0) 9 (.0) 9 (.0) 9 (.0) 9 (.0) 9 0-/ (.0) 9 0-/ (.0) 9 0-/ (.00) 9 0-/ (.00) 9 0 (.00) 9 0 (.00) Size Material Colour Minimum Weight Per Foot lb. (KG) 0.79 (.8).0 (7.). (9.0).0 (9.7).0 (.9). (0.0).7 (9.0).8 (09.) 8. (7.9) 9.7 (.0). (9.8) 7. (79.7) COND / _- _ = space for colour identifier Blank = Steel SA = Aluminum COND/-G is / in. steel conduit coated in grey PVC. R = Red H8
Corrosion-Protected Connections for Conduit Sections OCAL-BLUE TM Couplings Nominal 0.00 in. ( mils) blue urethane coating on interior and threads Minimum 0.00 in. (0 mils) PVC coating bonded to exterior Couplings have straight threads (NPS), not tapered Molded ribs on outer coating for easy installation (up to and including in. trade size) Couplings have pressure-sealing sleeves to protect your connection Steel CPL/-_ CPL/-_ CPL-_ CPL-/-_ CPL-/-_ CPL-_ CPL-_ CPL-_ CPL-_ CPL-_ *CPL-_ *CPL-_ CPL/SA-_ CPL/SA-_ CPLSA-_ Aluminum CPL-/SA- CPL-/SA-_ CPLSA-_ CPLSA-_ CPLSA-_ CPLSA-_ CPLSA-_ CPLSA-_ CPLSA-_ Metric size designator (ANSI C80.-99). *Not CSA certified. Coupling Size / () / () (7) -/ () -/ () () () (9) (0) (9) () Minimum Length of Metal.0 (8.0). (8.9).9 (8.).9 (8.).9 (8.).9 (9.9).88 (7.0).0 (7.98).09 (78.8).9 (80.97).7 (8.9). (87.9) Total Minimum Length Including Sleeve.7 (9.).7 (9.).9 (9.70).0 (9.70).7 (.0).9 (0.79).88 (7.70) 7.0 (78.8) 7.09 (80.8) 7.9 (8.7) 7.7 (87.9) 7. (88.89) Size Material Colour Weight lb./kg 0. (0.) 0.9 (0.8) 0. (0.) 0. (.9) 0. (.) 0.77 (.).8 (.8).70 (.).78 (.70).08 (.9).00 (.) 8.00 (.0) CPL / SA- _ = space for colour identifier Blank = Steel SA = Aluminum CPLSA-B is in. aluminum coupling coated in blue PVC. R = Red H9
OCAL-BLUE TM Double-Coat Split Couplings Split couplings serve as speed unions for cost-effective joining of two separate lengths of threaded conduit. Like other Ocal TM fittings, they re double coated in urethane and PVC to safeguard your entire conduit system against corrosion. Malleable iron construction Nominal 0.00 in. ( mils) blue urethane on both interior and exterior Minimum 0.00 in. (0 mils) PVC bonded to exterior Stainless steel hardware included Join Threaded Conduit Where You Can t Use a Standard Coupling TCC- Colour _ = space for colour identifier R = Red _ NOTE The use of standard couplings is recommended whenever possible over the use of split couplings, because standard couplings provide better overall corrosion protection. TCC-_ / () TCC-_ / () TCC-_ (7) TCC-_ -/ () TCC-_ -/ () TCC-_ () Metric size designator (ANSI C80.-99). * Not CSA certified. TCC7-_ TCC8-_ TCC9-_ TCC0-_ *TCC-_ *TCC-_ () (9) (0) (9) () Speed Up Your Field Installations with Pre-Threaded Conduit Nipples! OCAL-BLUE TM Nipples Made from Ocal TM PVC-coated steel or aluminum conduit urethane coating over threads Nominal 0.00 in. ( mils) blue urethane on interior Minimum 0.00 in. (0 mils) PVC coating on exterior Colour-coded thread protectors for easy identification of conduit size Available in standard lengths close and in. to in. with custom lengths available on request Close nipples are coated only in urethane Size X Lengh Material Colour NPL / X _- _ = space for colour identifier Blank = Steel SA = Aluminum NPL/X-G is / in. x in. long steel nipple coated in grey PVC. R = Red H0
OCAL-BLUE TM NIPPLES (cont d) PVC-Coated Conduit Nipples Steel / () / () (7) -/ () -/ () () () (9) (0) * (9) * () Close (0.8) (.) (7.) (88.9) Nipple Length (0.) (7.0) (.) 8 (0.) 0 (.0) CLNPL/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X-_ NPL/X-_ NPL/X8-_ NPL/X0-_ NPL/X-_ CLNPL/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X-_ NPL/X-_ NPL/X8-_ NPL/X0-_ NPL/X-_ CLNPL-_ NPLX-_ NPLX/-_ NPLX-_ NPLX/-_ NPLX-_ NPLX-_ NPLX-_ NPLX8-_ NPLX0-_ NPLX-_ (0.8) CLNPL/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X-_ NPL/X-_ NPL/X8-_ NPL/X0-_ NPL/X-_ CLNPL/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X/-_ NPL/X-_ NPL/X-_ NPL/X-_ NPL/X8-_ NPL/X0-_ NPL/X-_ CLNPL-_ NPLX/-_ NPLX-_ NPLX/-_ NPLX-_ NPLX-_ NPLX-_ NPLX8-_ NPLX0-_ NPLX-_ CLNPL/-_ NPL/X/-_ NPL/X-_ NPL/X-_ NPL/X-_ NPL/X8-_ NPL/X0-_ NPL/X -_ CLNPL-_ NPLX/-_ NPLX-_ NPLX-_ NPLX-_ NPLX8-_ NPLX0-_ NPLX-_ CLNPL/-_ NPL/X-_ NPL/X-_ NPL/X-_ NPL/X8-_ NPL/X0-_ NPL/X-_ CLNPL-_ NPLX-_ NPLX-_ NPLX-_ NPLX8-_ NPLX0-_ NPLX-_ CLNPL-_ NPLX-_ NPLX-_ NPLX8-_ NPLX0-_ NPLX-_ CLNPL-_ NPLX-_ NPLX-_ NPLX8-_ NPLX0-_ NPLX-_ PVC-Coated Conduit Nipples Aluminum / () / () (7) -/ () -/ () () () (9) (0) * (9) * () Close (0.8) (.) (7.) (88.9) Nipple Length (0.) (7.0) (.) 8 (0.) 0 (.0) (0.8) CLNPL/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/XSA-_ NPL/XSA-_ NPL/X8SA-_ NPL/X0SA-_ NPL/XSA-_ CLNPL/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/XSA-_ NPL/XSA-_ NPL/X8SA-_ NPL/X0SA-_ NPL/XSA-_ CLNPLSA-_ NPLXSA-_ NPLX/SA-_ NPLXSA-_ NPLX/SA-_ NPLXSA-_ NPLXSA-_ NPLXSA-_ NPLX8SA-_ NPLX0SA-_ NPLXSA-_ CLNPL/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/XSA-_ NPL/XSA-_ NPL/X8SA-_ NPL/X0SA-_ NPL/XSA-_ CLNPL/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/X/SA-_ NPL/XSA-_ NPL/XSA-_ NPL/XSA-_ NPL/X8SA-_ NPL/X0SA-_ NPL/XSA-_ CLNPLSA-_ NPLX/SA-_ NPLXSA-_ NPLX/SA-_ NPLXSA-_ NPLXSA-_ NPLXSA-_ NPLX8SA-_ NPLX0SA-_ NPLXSA-_ CLNPL/SA-_ NPL/X/SA-_ NPL/XSA-_ NPL/XSA-_ NPL/XSA-_ NPL/X8SA-_ NPL/X0SA-_ NPL/XSA-_ CLNPLSA-_ NPLX/SA-_ NPL/XSA-_ NPLXSA-_ NPLXSA-_ NPLX8SA-_ NPLX0SA-_ NPLXSA-_ CLNPL/SA-_ NPL/XSA-_ NPL/XSA-_ NPL/XSA-_ NPL/X8SA-_ NPL/X0SA-_ NPL/XSA-_ CLNPLSA-_ NPLXSA-_ NPLXSA-_ NPLXSA-_ NPLX8SA-_ NPLX0SA-_ NPLXSA-_ CLNPLSA-_ NPLXSA-_ NPLXSA-_ NPLX8SA-_ NPLX0SA-_ NPLXSA-_ CLNPLSA-_ NPLXSA-_ NPLXSA-_ NPLX8SA-_ NPLX0SA-_ NPLXSA-_ Metric size designator (ANSI C80.-99). * Not CSA certified. H
Factory Bent to Save Time and Materials! OCAL-BLUE TM Standard-Radius Elbows Fabricated from Ocal TM PVC-coated conduit Standard radius is 90, and is available for immediate shipment Colour-coded thread protectors for easy identification of conduit size Special radius and degrees (0, and 0 ) not listed are also available upon request 90 Standard-Radius Elbows ELL/-_-_ ELL/-_-_ ELL-_-_ ELL-/-_-_ ELL-/-_-_ ELL-_-_ ELL-_-_ ELL-_-_ ELL-_-_ ELL-_-_ *ELL-_-_ *ELL-_-_ Radius R Offset C Straight End D Unbent Length Weight Each Steel Aluminum lb. (kg) ELL/-_-SA-_ ELL/-_-SA-_ ELL-_-SA-_ ELL-/-_-SA-_ ELL-/-_-SA-_ ELL-_-SA-_ ELL-_-SA-_ ELL-_-SA-_ ELL-_-SA-_ ELL-_-SA-_ ELL-_-SA-_ ELL-_-SA-_ Metric size designator (ANSI C80.-99). * Not CSA certified. / () / () (7) -/ () -/ () () () (9) (0) (9) ().00 (0.0).0 (.0).7 (.0) 7. (8.) 8. (09.) 9.0 (.0) 0.0 (.70).00 (0.0).00 (8.00).00 (0.0).00 (09.0) 0.00 (7.00).00 (.0).0 (.0) 8.00 (0.0) 9.0 (.0).00 (79.0).00 (0.0).00 (.0).0 (9.0) 0.7 (7.0).7 (.).00 (787.0) 9.00 (990.0).00 (0.80).00 (0.80). (7.). (7.).7 (9.8).0 (88.90).0 (88.90).0 (88.90).7 (.0).7 (.0) 7.00 (77.80) 9.00 (8.0) 0.8 (.9).07 (8.). (.7).89 (0.) 8. (8.8).9 (.8).9 (9.7) 7. (9.8).0 (890.7). (90.7).70 (.). (.) 0.7 (.9) 0.9 (.07).77 (.97). (.80).98 (0.). (0.8) 9. (.09). (9.77).0 (9.8) 9.8 (7.80) 0.8 (.89) 8.9 (7.) Angle Material Colour ELL / _- _- _ = space for colour identifier 0 = 0º Blank = Steel = º SA = Aluminum 0 = 0º Blank = 90º R = Red ELL/SA-W is a / in. trade size 90º aluminum elbow coated in white PVC. H
Choose the Size and Angle to Meet your Exact Requirements OCAL-BLUE TM Large-Radius Elbows Fabricated from Ocal TM PVC-coated conduit Standard radius in 90 available for immediate shipment Special radius and degrees not listed are also available upon request Colour-coded thread protectors for easy identification of conduit size Radius R Offset C Straight End D Unbent Length Steel Aluminum LRELL_X-_-_ LRELL_X-_-SA-_ - (7- ) LRELL_X-_-_ LRELL_X-_-SA-_ - (7-78) LRELL_X8-_-_ LRELL_X8-_-SA-_ - (7-0) LRELL_X-_-_ LRELL_X-_-SA-_ - (7-0) LRELL_X0-_-_ LRELL_X0-_-SA-_ - (7 - ) LRELL_X-_-_ LRELL_X-_-SA-_ - (7 - ) LRELL_X-_-_ LRELL_X-_-SA-_ - (7 - ) LRELL_X8-_-_ LRELL_X8-_-SA-_ - (7 - ) LRELL_X0-_-_ LRELL_X0-_-SA-_ - ( - ) Metric size designator (ANSI C80.-99). # and inch not CSA certified..00 (0.80).00 (8.00) 8.00 (7.0).00 (09.0) 0.00 (7.00).00 (9.0).00 (0.80) 8.00 (9.0) 0.00 (.00).9 (.0).00 (09.0). (7.0). (889.00). (0.0). (9.80). (7.0).00 (.00).00 (88.80) 9.00 (8.0) 9.00 (8.0) 0.00 (.00).00 (79.0).00 (79.0).00 (79.0).00 (0.80).00 (0.80).00 (0.80).00 (9.0). (0.80).00 (9.0). (98.0).9 (7.0). (98.0) 7. (8.00) 8. (90.80) 9.0 (997.0) Radius Angle Material Colour LRELL X _- _- _ = space for colour identifier = 0 = 0º Blank = Steel = = º SA = Aluminum etc. 0 = 0º Blank = 90º R = Red LRELLX8--G is a trade size steel elbow with a radius of 8 and an angle of º, coated in grey PVC H
PVC Coating Evenly Molded Around Saddle Prevents Exposure of Metal an Ocal TM Exclusive! Ocal TM PVC-Coated Beam Clamps and U-Bolts Beam clamps support and attach conduit runs to structural beams Molded right-angle beam clamps and U-bolts provide extra protection Nuts are encapsulated, (RA) providing complete protection. Hex-shaped nuts fit standard wrenches Stainless steel hardware included Parallel (PAR) and edge (EC) clamps feature nominal 0.0 in. ( mils) PVC coating for corrosion protection Right-Angle clamps (RA) and U-Bolts (UB) feature nominal 0.00 in. (0 mils) PVC coating for corrosion protection The coating is evenly molded around the saddle to prevent exposure to metal Parallel (PAR) Edge (EC) Right Angle (RA) PVC-Coated Beam Clamps Size Colour RA- _ = space for colour identifier Right Angle Parallel Edge RA/-_ PAR/-_ EC/-_ / () RA/-_ PAR/-_ EC/-_ / () RA-_ PAR-_ EC-_ (7) RA-/-_ PAR-/-_ EC-/-_ -/ () RA-/-_ PAR-/-_ EC-/-_ -/ () RA-_ PAR-_ EC-_ () RA-_ PAR-_ () RA-_ PAR-_ RA-_ PAR-_ (9) RA-_ PAR-_ (0) Custom colours also available - Std. min. quantities are required. Please contact your Regional Sales Office. U-Bolts A Boulon en U (UB) Size Colour UB- _ = space for colour identifier Custom colours also available - Std. min. quantities are required. Please contact your Regional Sales Office. A Dimension UB/-_ / ().8 (.9) UB/-_ / (). (9.9) UB-_ (7).8 (.8) UB-/-_ -/ ().9 (.) UB-/-_ -/ ().0 (.0) UB- ().97 (7.) UB-_ ().7 (88.) UB-.09 (0.98) UB-_ (9).9 (.8) UB-_ (0).09 (9.8) UB-_ (9). (8.8) UB-_ () 8.00 (0.0) Metric size designator (ANSI C80.-99). H
Support Conduit on Walls and Structures Pipe Straps PVC Coated Available in malleable iron/stamped steel with nominal 0.0 in ( mils) PVC coating in your choice of blue, white or grey Choose one- or two-hole versions Sized to allow for the extra thickness of the PVC coating Colour Suffix = colour identifier Custom colours also available - Std. min. quantities are required. Please contact your Regional Sales Office. Pipe Spacers PVC Coated Corrosion resistant PVC coated malleable iron. Pre-mountable, stackable to eliminate offsetting. Spacers can be stacked for offsets on wall or into outlet box. Prevents conduit rusting from wall condensation. Eliminates offsetting of conduit. One Hole Pipe Straps Pipe Strap (in.) Material Figure Pipe Spacers Fig. Fig. One Hole Pipe Straps 77CR* / Malleable iron 78CR* / Malleable iron 0CR* HSC-G** Steel Fig. Fig. HMS/-G** -/ Malleable iron 80CR* -/ Malleable iron HMS-C-G Malleable iron CR* Pipe Spacers HMS/-C-G Malleable iron CB/-G** HMS-C-G Malleable iron CB-G** 0CR Serie CB/-G HMS-C-G Malleable iron CB-G** * CSA Certified ** UL not applicable Two Hole Pipe Straps Pipe Strap (in.) Material Figure Pipe Spacers Two Hole Pipe Straps Fig. HMS-C-G Malleable iron HMS/-C-G Malleable iron HMS-C-G Malleable iron HMS-C-G Malleable iron HMCB-/-C-G HMCB--C-G H