Recycling contaminants: chemicals in the paper product cycle David Laner 1, Kostyantyn Pivnenko 2, Thomas F. Astrup 2 1 Institute for Water Quality, Resources and Waste Management, TU Wien, Karlsplatz 13, 1040 Wien, Austria 2 Department of Environmental Engineering, Technical University of Denmark, DK-2800 Kgs. Lyngby, Denmark Discussion forum on Life Cycle Assessment November 30 th 2016, ETH Zürich 1/18
Clean cycles safe final sinks Source: Laner & Rechberger (2016), doi: 10.1007/978-94-017-7610-3 based on Kral et al. (2013), doi:http://dx.doi.org/10.1016/j.scitotenv.2012.08.094 2/18
Paper not just fibers Paper has a high share of secondary production >70% Paper is not composed of fibers only Inks Biocides Solvents Binders Pigments Source: http://thefiberwire.com Plasticisers 3/18
Unwanted cycles Bisphenol A (BPA) Mainly used in thermal paper (color developer) and also for glueing Diethylhexyl phthalate (DEHP) Used as plasticizers in lacquers, dispersion glues, and printing inks Source: Liao & Kannan (2011), doi: 10.1021/es202507f Mineral oil hydrocarbons (MOHs) Mainly used in offset printing (solvents) Contamination of foodstuff reported Source: Foodwatch (2015) 4/18
Goal & Approach Goals: Evaluate the flows of chemicals (BPA, DEHP, MOHs) in circular product systems (given limited data availability) using the example of paper Develop and assess strategies for reducing contamination of paper products with these chemicals Approach European paper flow budget for the year 2012 Determine the amount of chemicals used in paper products Dynamic model of the paper cycle Analyse scenarios for reducing chemicals contamination of paper products 5/18
1. Balancing paper flows in Europe (2012) Production Conversion Input data: Production statistics, trade statistics, paper collection & recycling, waste management, etc. Recycling Use I-U Stock Collection Waste Management Stock CEPI, 2012 Balanced paper flow system, Process transfer coefficients (goods level) Source: Pivnenko et al. (2016), doi: 10.1021/acs.est.6b01791. 6/18
2. Determining chemicals flows Production Conversion Input data: Paper waste chemical analyses, production model & removal efficiencies, paper conversion model. Recycling input concentrations = output concentrations Use I-U Stock Collection Waste Management Stock CEPI, 2012 Source: Pivnenko et al. (2016), doi: 10.1021/acs.est.6b01791. Amounts of chemicals added per year, Process transfer coefficients (substance level) 7/18
3. Dynamic model of goods & substance cycles Production Conversion Input data: Paper production constant (goods level), constant amount of chemicals added every year (substance level), product lifetime functions Recycling Lifetime functions for paper product groups In-use phase Lifetime functions Stock Collection Waste Management Stock Scenarios to investigate chemical cycles in paper products Source: Pivnenko et al. (2016), doi: 10.1021/acs.est.6b01791. 8/18
4. Scenario analysis S1 Optimised collection S2 S0 Minimise Cleaner Reference production S3 Ban of chemical scenario Doubling concentrations of removal in paper rates Phase Steady products out state: of chemicals while constant (e.g. MOHS from 40% to maintaining paper Reduction production of 80%) & higher the use level to fiber and 0 of constant recycling within chemicals losses by 5 optimised years usage waste paper collection S2 S3 S0 S1 9/18
Paper flows in Europe (2012) Collection rate ~ 70% Recycling rate (within CEPI) ~ 51% Source: Pivnenko et al. (2016), doi: 10.1021/acs.est.6b01791. 10/18
Chemicals flows in Europe (2012) Source: Pivnenko et al. (2016), doi: 10.1021/acs.est.6b01791. 11/18
Dynamic model: Reference scenario Based on: Pivnenko et al. (2016), doi: 10.1021/acs.est.6b01791. 12/18
Implementation SC1 & 2 Implementation SC3 Reduction measures: BPA in paper products Steady state 19% 5% lower CR: 25% 9% 100% t LOD = 31 yrs LOD = 0.1 mg/kg Based on: Pivnenko et al. (2016), doi: 10.1021/acs.est.6b01791. 13/18
Implementation SC1 & 2 Implementation SC3 Reduction measures: DEHP in paper products Steady state 5% 5% lower CR: 26% 46% 100% t LOD = 15 yrs LOD = 2.5 mg/kg Based on: Pivnenko et al. (2016), doi: 10.1021/acs.est.6b01791. 14/18
Implementation SC1 & 2 Implementation SC3 Reduction measures: MOHs in paper products Steady state 13% 5% lower CR: 27% 80% t LOD = 13 yrs LOD = 80 mg/kg 100% Based on: Pivnenko et al. (2016), doi: 10.1021/acs.est.6b01791. 15/18
Conclusions Chemicals cycles in paper products Didactical case study (assumptions & uncertainties) Monitoring of contaminants in material cycles Measures for reducing paper product contamination Phase out is most effective (however, 13-31 years to fall below LOD) Collection (at current collection rates) close to optimum (low to moderate optimization potential) 5% lower collection rate increases the potential for reducing chemicals content in virgin paper products by optimized collection Trade-off between QUALITY and QUANTITY if waste paper share is (further) increased in paper production 16/18
Explore the trade off using LCA Resource recovery needs to be optimised quality of the secondary raw material directing pollutants to appropriate sinks substituted products min(env. Impacts), max(resource conservation) Based on: Laner & Rechberger (2007), ttp://dx.doi.org/10.1016/j.resconrec.2007.03.004 Impact assessment of products as sinks Link the modelling of substance flows in circular material flow systems to exposure, effect and consequent damage i.e. does increased recycling mean increased risk? 17/18
Thank you for your attention! Reference: Kostyantyn Pivnenko, David Laner, Thomas F. Astrup (2016): Material cycles and chemicals: Dynamic material flow analysis of contaminants in paper recycling. Environmental Science and Technology, DOI: 10.1021/acs.est.6b01791. Contact: Dr. David Laner Senior researcher Phone: +43-1-58801-22644 E-mail: david.laner@tuwien.ac.at http://www.irmar.dk/ 18/18