AVERY DENNISION Specialty Tape Division 250 Chester Street Painesville, OH 44077 Tel: 866.GO.AVERY or 866.462.8379 www.stus.averydennison.com FL 1000 Single coated 2.0 mil foil with 2.2 mils of an acrylic adhesive protected by a 40# Designed for die-cut shapes, shielding, moisture and vapor barrier sealing components or lamination to insulation materials that require environmental resistance. NA 88 6.7 NA FL 1002 Single coated 2 mil foil with 2.0 mils of a rubber-based adhesive protected by a 40# Designed for taping joints and seams against moisture and vapor on foil jacketing facings. NA 182 6.5 NA FL 1003 Single coated 1.5 mil foil with 1.5 mils of a rubber-based adhesive protected by a 40# Designed for die-cut shapes, shielding, moisture and vapor barrier sealing components or lamination to insulation materials. NA 120 5.5 NA FM 2116 Double coated 1/16, 3# white foam with 2.3 mils of a rubber-based adhesive on both sides protected by a 60# densified kraft Conformable construction designed for gap filling and cushioning NA 106/106 71.2 NA FM 2132 FM 2316 FM 2333 Double coated 1/32, 5# white foam with 2.3 mils of a rubber-based adhesive on both sides protected by a 60# densified kraft Double coated 1/16, 3# white foam with 2.1 mils of an acrylic adhesive on both sides protected by a 60# densified kraft Double coated 1/32, 5# white foam with 2.4 mils of an acrylic adhesive on both sides protected by a 60# densified kraft Conformable construction designed for gap filling and cushioning Conformable construction designed for gap filling and cushioning applications that require environmental resistance. Conformable construction designed for gap filling and cushioning applications that require environmental resistance. NA 112/112 39.2 NA NA 123/130 70.8 NA NA 134/142 39.4 NA AVERY DENNISON FM 2454 Double coated 1/32, 6# black foam with 1.8 mils of an acrylic adhesive on both sides protected by an 60# densified kraft Designed for bonding automotive mirrors to mirror housings where good adhesion, heat resistance, environmental resistance gap filling and shatter resistance are important. NA 107/107 37.2 NA FT 0411 Single coated 4 mils clear PP film coated with 1.0 mil of a long term removable acrylic adhesive protected by a clay coated kraft A transparent protective film allows perfect visual inspection. Designed as an application tape for emblem and badge mounting. The transparent protective film allows for visual inspection. The tape can be cleanly removed from plastics, wood, painted steel and glass surfaces even after long term use. NA 14 10.0 NA FT 0720 DL-C Clear Double-linered transfer tape with 1.3 mils of an acrylic adhesive protected by a 50# densified kraft liner and a 1.0 mil PET Specially developed for buried graphic label NA 26 5.5 NA FT 0720 DL-W White Double-linered transfer tape with 1.1 mils of a white opaque acrylic adhesive protected by a 50# densified kraft liner and a 1.0 mil PET Specially developed for buried graphic label NA 35 5.3 NA FT 0815 Single coated 5 mil foil with 1.2 mils of a rubber-based adhesive protected by a 60# Designed for moisture barrier and heat shield 40 128 9.7 NA 2009 Tape Products Directory 33
FT 0816 FT 0900 B FT 0900 B PET FT 1115 FT 1122 HLP FT 1123 FT 1125 HLP FT 1126 12PT BD FT 1126 FT 1143 FT 1147 Low VOC FT 1149 Low VOC FT 1150 FT 1158 FT 1159 Single coated 5.0 mil foil with 4.7 mils of an acrylic adhesive protected by a 60# Black flock with 4.5 mils of an acrylic adhesive protected by an 84# polycoated Black flock with 4.5 mils of an acrylic adhesive protected by a 2.0 mil PET 4.7 mil acrylic adhesive protected by an 80# 2.1 mil acrylic adhesive protected by an 84# polycoated 3.0 mil acrylic adhesive protected by an 80# 4.5 mil acrylic adhesive protected by an 84# polycoated 4.9 mil acrylic adhesive protected by a 12 point board 4.9 mil acrylic adhesive protected by an 80# 3.1 mil acrylic adhesive protected by an 80# 2.9 mil acrylic adhesive protected by an 83# natural polycoated kraft 4.5 mil acrylic adhesive protected by an 84# polycoated 2.0 mil acrylic adhesive protected by an 80# 5.2 mil acrylic adhesive protected by an 80# 2.2 mil high tack rubber-based adhesive protected by an 80# Designed for moisture barrier and heat shield applications that require environmental resistance. Designed for sound deadening and anti-squeak Designed for sound deadening and anti-squeak The PET liner acts as a processing aid for improved die cutting. Designed for polyurethane foam bonding applications and offers plasticizer resistance. Designed to meet adhesion and shear requirements for most long term nameplate and decorative trim Ideal for lamination to graphic overlay material. Designed for applications requiring an acrylic adhesive for laminating to polyurethane foams where high initial tack and adhesion are required. Designed to meet adhesion and shear requirements for most long term nameplate and decorative trim Ideal for lamination to graphic overlay material. Designed for applications requiring an acrylic adhesive for laminating to polyurethane foams where high initial tack and adhesion are required. Designed for applications requiring an acrylic adhesive for laminating to polyurethane foams where high initial tack and adhesion are required. Designed for polyurethane foam bonding applications and offers plasticizer resistance. Designed for applications requiring high adhesion to low surface energy materials and bonding to foams and fabrics where low-fogging is required. Does not contain any of the 13 chemicals restricted by the Japanese Ministry of Health, Labor and Welfare. Designed for applications requiring high adhesion to low surface energy materials and bonding to foams and fabrics where low-fogging is required. Does not contain any of the 13 chemicals restricted by the Japanese Ministry of Health, Labor and Welfare. Designed for the permanent mounting of foil, metal and plastic nameplates and decorative trim. Designed for applications requiring an aggressive fiber-filled acrylic adhesive offering excellent diecutting and slitting properties. Designed for applications requiring good quick stick and adhesion to low surface energy substrates and foams. 35 106 13.2 NA NA 88 44.1 NA NA 88 39.5 NA NA 77 9.3 NA NA 61 8.7 NA NA 125 7.6 NA NA 75 11.1 NA NA 134 17.4 NA NA 134 9.5 NA NA 69 7.7 NA NA 123 9.5 NA NA 149 11.1 NA NA 61 6.6 NA NA 146 9.8 NA NA 181 6.8 NA 34 2009 Tape Products Directory
FT 165 FT 1906 FR 1.2 mil synthetic rubber-based adhesive protected by a 2.2 mil white glassine 2.0 mil modified fire retardant acrylic adhesive protected by a 60# calendared kraft FT 3012 Double-linered transfer tape with 2.3 mils of a silicone based adhesive protected by a 2.0 mil PET liner and 2.5 mil white PET FT 3047 Double-linered transfer tape with 2.2 mils of a modified acrylic adhesive protected by a 53# densified kraft liner on both sides. FT 310 FT 333 FT 445 0.5 mil PET with 0.6 mils of a removable acrylic 1.75 mils of a permanent adhesive on the liner side protected by a white glassine 0.5 mil PET with 2.1 mils of an acrylic by a 60# 1.0 mil PP with 2.3 mils of a rubberbased by a 60# FT 666 Double coated PET scrim with 2x 3.15 mils of a synthetic rubber adhesive protected by a havana glassine FT 702P FT 7951 FT 8217 FT 8260 Low VOC FT 8302 0.5 mil PET with 2.0 mils of an acrylic 2.9 mils of an acrylic adhesive on the liner side protected by a 63# polycoated PET scrim reinforced transfer tape with 3.15 mils of an emulsion coated modified acrylic adhesive protected by a havana glassine 0.3 oz non-woven with 3.2 mils of an acrylic 2.1 mils of an acrylic adhesive on the liner side protected by a 60# densified kraft 3.0 mil SB non-woven with 2.0 mils of an acrylic adhesive on the unwind side and 2.0 mils of an acrylic adhesive on the liner side protected by a 83# natural polycoated kraft 0.5 mil PET with 1.7 mils of a rubberbased 1.4 mils of a rubber-based adhesive on the liner side protected by an 60# Designed for envelopes and continuous forms. NA 74 3.4 NA Designed for applications requiring high flame retardant properties to meet the most stringent flammability requirements. Designed for applications where heat and environmental resistance is important. Offers excellent die cutting and slitting properties. Designed for tamper evident graphical applications whereby the adhesive is leaving a UV luminescent footprint. The removable adhesive can be removed with no ghosting up to one year after application from most hard substrates. Designed to bond to polyurethane foams, sponge rubber, metal and plastic parts where high adhesion is required. substrates Designed for bonding to foamed rubbers and plastics used in industrial gaskets and weather seals. Good compatibility with EPDM/rubbers. Designed for bonding to high surface energy plastics and metal substrates. General purpose foam bonding, gaskets, sound deadening and insulation materials. Typical end uses involving critical temperature performance, interior automotive trim, PU foams, felts, fabrics and fibers. Designed for use on applications that require excellent adhesion to foam or low surface energy substrates along with good dimensional stability. Designed for applications requiring high adhesion to low surface energy materials and bonding to foams and fabrics where low-fogging is required. Does not contain any of the 13 chemicals restricted by the Japanese Ministry of Health, Labor and Welfare. Economical general purpose product. Ideal for foam bonding. NA 35 5.5 NA NA 75 6.8 NA NA 56 8.6 NA 16 18/96 5.7 100 16 80/80 8.2 100 25 152/138 9.1 65 235 10.4 16 74/61 9.9 100 NA 117 6.7 NA NA 133/106 10.3 NA NA 169/95 11.6 NA 16 124/145 7.1 100 2009 Tape Products Directory 35
FT 8305 FT 8306 FT 8311 FT 8312 FT 8326 12 PT BD FT 8327 FT 8327 12PT BD FT 8337 FT 8345 FT 8346 FT 8380 0.5 mil PET with 1.2 mils of a rubberbased by a 60# 0.5 mil PET with 2.1 mils of a permanent rubber 0.8 mils of a removable acrylic adhesive on the liner side protected by a 60# 0.5 mil PET with 1.8 mils of a high-tack acrylic 1.8 mils of a high-tack acrylic adhesive on the liner side protected by a 76# 1.0 mil PET with 2.1 mils of a rubberbased 3.2 mils of a rubber-based adhesive on the liner side protected by a 100# 0.5 mil PET with 2.1 mils of a rubberbased 1.8 mils of a rubber-based adhesive on the liner side protected by a 146# natural poly-coated kraft 0.5 mil PET with 2.0 mils of a rubberbased 1.6 mils of a rubber-based adhesive on the liner side protected by a 76# densified kraft liner 0.5 mil PET with 2.0 mils of a rubberbased 1.6 mils of a rubber-based adhesive on the liner side protected by a 12 point board 0.5 mil PET with 1.9 mils of a rubberbased 0.8 mils of a rubber-based adhesive on the liner side protected by an 80# 0.5 mil PET with 2.4 mils of a rubberbased by a 60# 0.5 mil PET with 2.4 mils of an acrylic 1.8 mils of an acrylic adhesive on the liner side protected by an 80# densified kraft 0.5 mil PET with 1.2 mils of a rubberbased 1.0 mils a of rubber-based adhesive on the liner side protected by a 60# substrates. Designed for use where temporary mounting to substrates is desired. Designed for a variety of applications requiring initial quick stick. Excellent for foam bonding application and used in electronic and packaging substrates. Designed for bonding to a wide variety of polyurethane and polyethylene foams used in gasketing, sealing and sound damping Designed for bonding to a wide variety of polyurethane and polyethylene foams used in gasketing, sealing and sound damping Designed for bonding to a wide variety of polyurethane and polyethylene foams used in gasketing, sealing and sound damping Designed to offer temporary removability on a wide variety of substrates. substrates Designed for use in applications requiring lamination to polyurethane foams. Designed for use on bonding point of purchase display information to shelving materials. 16 134/136 6.5 100 16 21/130 6.9 100 16 74/70 8.7 100 32 223/197 12.2 100 16 119/124 16.9 100 16 119/124 8.7 100 16 119/124 16.9 100 16 43/114 7.8 100 16 179/163 8.9 100 16 120/125 9.3 100 16 64 6.2 100 36 2009 Tape Products Directory
FT 8392 FT 8392 12 PT BD FT 8397 FT 8716 FT 9302M FT 9325 PG FT 9330 FT 9361 Low VOC FT A FT B FT B 12 PT BD 0.5 mil PET with 1.3 mils of a high performance acrylic on the unwind side and 1.5 mils of an aggressive rubberbased adhesive on the liner side protected by an 80# 0.5 mil PET with 1.3 mils of a high performance acrylic on the unwind side and 1.5 mils of an aggressive rubberbased adhesive on the liner side protected by a 12 point board 0.5 mil PET with 1.2 mils of a high tack acrylic 1.0 mils of a high tack acrylic adhesive on the liner side protected by a 60# 0.3 oz non-woven with 1.3 mils of a high performance acrylic adhesive on the unwind side and 1.3 mils of an acrylic adhesive on the liner side protected by a 80# 2.0 PET with 2.7 mils of a silicone adhesive on the unwind side with 2.1 mils of a modified acrylic on the liner side protected by a 76# densified kraft 0.5 PET with 2.4 mils of a rubber-based adhesive on the unwind side with 3.0 mils of a rubber-based adhesive on the liner side protected by a 52# densified kraft 0.5 PET with 2.0 mils of a rubber-based adhesive on the unwind side with 2.4 mils of a rubber-based adhesive on the liner side protected by a 2.0 mils PET 0.5 mil PET with 2.0 mils of an acrylic 2.0 mils of an acrylic adhesive on the liner side protected by a 83# natural polycoated kraft 0.5 mil PET with 2.0 mils of an acrylic by a 60# 0.5 mil PET with 1.7 mils of a rubberbased 1.5 mils of a rubber-based adhesive on the liner side protected by an 80# 0.5 mil PET with 1.7 mils of a rubberbased 1.5 mils of a rubber-based adhesive on the liner side protected by a 12 point board A tape designed with an acrylic adhesive suitable for polyurethane foam bonding and a general purpose rubber adhesive for a wide variety of substrates. A tape designed with an acrylic adhesive suitable for polyurethane foam bonding and a general purpose rubber adhesive for a wide variety of substrates. Economical tape designed for use in applications requiring lamination to polyurethane foams. Designed for bonding to a wide variety of foams. This product offers excellent environmental and chemical resistance. Designed for applications requiring good adhesion to low surface energy and textured materials. Designed with a finger lift edge for box closure substrates Designed for applications requiring high adhesion to low surface energy materials and bonding to foams and fabrics where low-fogging is required. Does not contain any of the 13 chemicals restricted by the Japanese Ministry of Health, Labor and Welfare. Designed for bonding to high surface energy plastics, metal and foam substrates where resistance to plasticizers is required. Designed to provide an economical product for general purpose bonding. Designed to provide an economical product for general purpose bonding. 16 114/66 7.9 100 16 114/66 15.8 100 16 101/109 6.3 100 NA 56/56 8.2 NA 64 88/126 12.4 100 16 152/144 9.1 100 16 192/176 6.9 100 16 91/87 9.1 100 16 70/70 8.0 100 16 142/139 8.3 100 16 142/139 16.2 100 2009 Tape Products Directory 37
FT C FT D FT E-8 FT EZ-8 HPA 1902 HPA 1902 PET HPA 1905 HPA 1905 PET UHA 0805 UHA 1185 HLP UHA 1191 UHA 1192 UHA 1195 10# tissue with 1.8 mils of a rubberbased 1.6 mils of a rubber-based adhesive on the liner side protected by a 60# 0.5 mil PET with 2.5 mils of a rubberbased by a 60# 0.5 mil PET with 1.4 mils of a rubberbased by an 80# 0.5 mil PET with 1.5 mils of a rubberbased by an 80# 2.5 mil acrylic adhesive protected by an 58# natural polycoated kraft 2.5 mil acrylic adhesive protected by a 2.0 mil PET 5.0 mil acrylic adhesive protected by an 58# natural polycoated kraft 5.0 mil acrylic adhesive protected by a 2.0 mil PET Single coated 10 mil foil with 4.8 mils of an ultra high adhesion acrylic adhesive protected by a 84# polycoated 4.6 mil ultra high adhesion adhesive protected by an 84# polycoated 11.0 mil ultra high adhesion adhesive protected by an 80# 2.0 mil ultra high adhesion adhesive protected by an 80# 5.0 mil ultra high adhesion adhesive protected by an 80# Designed as a general purpose tissue tape providing high conformability and high adhesion to a variety of surfaces. Designed for applications where high adhesion and tack are required on a variety of substrates. Ideal for applications requiring initial lamination to polyurethane foams and temporary removability from a variety of substrates. Designed for applications requiring initial lamination to polyurethane foams and temporary removability from a variety of substrates. Offers easier liner removal than FT E-8. Designed for use on nameplates, membrane touch switch assemblies and graphic overlays. Applications requiring good "holding power" under stress and load. Designed for use on nameplates, membrane touch switch assemblies and graphic overlays. Applications requiring good "holding power" under stress and load. Designed for use on nameplates, membrane touch switch assemblies and graphic overlays. Applications requiring good "holding power" under stress and load. Designed for use on nameplates, membrane touch switch assemblies and graphic overlays. Applications requiring good "holding power" under stress and load. Designed for reducing resonate noise, vibration and stress fatigue in structures as a constrained layer damper (CLD). Used in industrial, transportation, electronic and appliance markets providing resistance to heat, solvents and humidity. Designed for applications requiring excellent high temperature performance. The adhesive offers excellent resistance to solvents such as gasoline, motor oil and anti-freeze. Provides excellent resistance to UV light exposure. Designed for applications requiring high adhesion, tack and shear to low This product provides excellent adhesion to textured materials. Designed for applications requiring high adhesion, tack and shear to low Designed for applications requiring high adhesion, tack and shear to low This product provides excellent adhesion to textured materials. NA 135/111 8.5 NA 16 260/227 9.0 100 16 106/101 8.0 100 16 110/101 8.1 100 NA 71 6.8 NA NA 76 4.5 NA NA 87 9.3 NA NA 102 7.0 NA NA 125 21.4 NA NA 67 11.2 NA NA 216 15.6 NA NA 93 6.6 NA NA 137 9.6 NA 38 2009 Tape Products Directory
UHA 1198 UHA 8250 UHA 8272-100 UHA 8791 UHA 9350 UHMW 0433 UHMW 0435 XHA 9625 XHA 9632 XHA 9645 XHA 9660 XHA 9690 8.0 mil ultra high adhesion adhesive protected by an 80# 0.3 oz. non-woven with 2.0 mils of an ultra high adhesion acrylic adhesive on the unwind side and 2.0 mils of an ultra high adhesion rubber adhesive on the liner side protected by a 80# densified kraft 10# tissue with 3.3 mils of an acrylic 2.4 mils of an ultra high adhesion acrylic adhesive on the liner side protected by a 100# 0.3 oz. non-woven with 2.9 mils of an acrylic 5.2 mils of an ultra high adhesion rubber adhesive on the liner side protected by an 80# 0.5 mil PET with 2.0 mils of an ultra high adhesion acrylic adhesive on the unwind side and 2.0 mils of an ultra high adhesion rubber adhesive on the liner side protected by a 80# densified kraft 3 mil UHMW-PE with 2.0 mils of a high tack modified acrylic adhesive protected by a 80# 5 mil UHMW-PE with 2.0 mils of a high tack modified acrylic adhesive protected by a 80# XHA 9625 is a patented 25 mil bonding XHA 9632 is a patented 32 mil bonding XHA 9645 is a patented 45 mil bonding XHA 9660 is a patented 60 mil bonding XHA 9690 is a patented 90 mil bonding Designed for applications requiring high adhesion, tack and shear to low This product provides excellent adhesion to textured materials. Excellent adhesion to open cell polyurethane foams. Ideal for applications requiring temperature resistance and good conformability. Excellent adhesion to open cell polyurethane foams. Ideal for applications requiring temperature resistance and good conformability. NA 159 12.6 NA NA 125 9.6 NA NA 64/77 13.1 NA Designed for bonding automotive trim carpeting. NA 193/110 13.7 NA Excellent adhesion to open cell polyurethane foams. Ideal for applications requiring temperature resistance. An abrasion resistant tape designed for low coefficient of friction Ideal for antisqueak and rattle An abrasion resistant tape designed for low coefficient of friction Ideal for antisqueak and rattle XHA 9625 delivers quick initial bond and is XHA 9632 delivers quick initial bond and is XHA 9645 delivers quick initial bond and is XHA 9660 delivers quick initial bond and is XHA 9690 delivers quick initial bond and is NA 126 9.4 NA NA 106 9.6 NA NA 110 11.6 NA NA 348 25 NA NA 276 32 NA NA 264 45 NA NA 288 60 NA NA 300 90 NA 2009 Tape Products Directory 39
XHA 9725 XHA 9725 is a patented 25 mil bonding XHA 9725 delivers quick initial bond and NA 464 25 NA XHA 9732 XHA 9732 is a patented 32 mil bonding XHA 9732 delivers quick initial bond and NA 368 32 NA XHA 9745 XHA 9745 is a patented 45 mil bonding XHA 9745 delivers quick initial bond and NA 352 45 NA XHA 9760 XHA 9760 is a patented 60 mil bonding XHA 9760 delivers quick initial bond and NA 384 60 NA XHA 9790 XHA 9790 is a patented 90 mil bonding XHA 9790 delivers quick initial bond and NA 400 90 NA 40 2009 Tape Products Directory