PROCESS MEASURING AND EMISSIONS MONITORING TECHNOLOGY

PROCESS MEASURING AND EMISSIONS MONITORING TECHNOLOGY

2 Company 35 years of know-how and experience The acronym ENOTEC is derived from ENergy Optimisation TEChnology. This is ENOTEC s core strength - manufacturing equipment and offering services which result in emissions reduction and combustion efficiency. ENOTEC s current HQ in Marienheide - Germany German solutions Established by Fred Gumprecht in 1980, ENOTEC has expanded its product and services range through the years, so that ENOTEC is today your competent partner for a large range of emission and process analyzing applications. A Solution for all Analysis Problems ENOTEC has not only limited itself to the development and production of gas analyzers. ENOTEC is also globally renowned for planning and execution of emission and process measuring technology. In this regard, our systems range from a single probe of our own production, to individually designed systems, consisting of our own analysers combined with products from well known and proven producers, through to ready-for-use emission and process projects, all built completely to your specifications. Continuous training and experience of over 35 years, enable our engineers and technicians to advise you expertly and reliably in all questions relating to analyser technology.

Company 3 Superior Analyzers The oxitec 5000 oxygen analyzer, developed by enotec and used throughout the world in thousands of combustion and process plants of all kinds is constantly developed to be cutting edge, providing highest accuracy even under the most adverse of conditions. cemtec, the patented, self-cleaning, maintenance-free Kiln probe system for cement kilns, endures extreme dust loads and high temperatures typical for this application. This high dust resistance of the cemtec combined with a continuous mechanical and pneumatic cleaning of the probe, enabled manufacturers to conduct fl ue gas measurements, maintenance-free for intervals of several months for the fi rst time. The comtec 6000 gas analyzer for the measurement of o 2 (oxygen) and Co e (combustibles), which is the world-wide fi rst reliable InSitu gas analyzer system for combustibles. comtec 6000 permits a more effi cient burner regulation and a faster diagnosis of the combustion quality. a considerable reduction of costs is possible due to the increased accuracy of measurement, energy saving and emission reduction. The cost of acquisition accordingly pays itself off in a very short time. The aquatec 1000 H 2 o analyzer is used in dehydration processes such as for tobacco or plasterboards, to economically accelerate the drying process. In addition, aquatec 2000 for CEms measures o 2 and H 2 o and includes a gas conditioning system. The sme electronic unit, fi rst launched in 1987 has over the years been continually developed and upgraded to include new technologies and is now, as the SME5 well known for its reliability and range of functions. The sme5 has an impressive array of hardware and software features to enable intuitive handling and a comprehensive evaluation of your measurements. latest generation microcontroller, high precision integrated circuits, large bright display and self diagnostics are just a few of the outstanding assets of the sme5. The enotec REmoTE enables hands free control of all enotec analyzers. Viewing analyzer and process information from your smartphone or tablet is now possible. Development and Innovation enotec continually strives to produce products which are high in quality and precision and are exactly engineered to function in the most demanding of applications. a large percentage enotec s workforce is dedicated to research and development. Robustness and Accuracy many imitations of the original sensor exist, though none reach the accuracy, robustness and reaction time of the enotec o 2 sensors. Built to survive corrosive and and aggressive gas conditions, the enotec o 2 sensor stays gas tight through its long service life Cross-section of a probe fi lter head

4 Enotec milestones enotec Milestones Continual development 1980 Establishment of ENOTEC in Gummersbach. 1986 ENOTEC starts producing its own oxygen analyzer systems based on the ZrO 2 measuring principle. 1987 Self-development of the OXITEC SME 1 electronic unit. 1990 The relocation to Marienheide to the current headquarters took place in 1990. 1992 Registration of the OXITEC trademark. 1993 In-house production of sensors for oxygen measurement begins. 1994 Establishment of subsidiary ENOTEC UK. 1997 Establishment of subsidiary ENOTEC USA. 1998 Introduction of the explosion-proof OXITEC ATEX oxygen analyzer system. 1999 Quality Management System ISO 9001 is adopted. The ENOTEC ASIA subsidiary is established. 2000 OXITEC electronic unit receives TÜV eligibility. 2003 COMTEC is launched, the world s first reliable InSitu measurement of CO e and O 2 in real-time. 2004 Introducing CEMTEC, the high temperature, InSitu analyzer system for O 2 and CO e. 2006 SIL 2 Qualification for the OXITEC oxygen analyzer system. The 10.000th O 2 sensor is built. 2008 TÜV eligibility for OXITEC 500E. The 15.000th O 2 sensor and 20th CEMTEC are built. 2010 Corresponding to ENOTEC s 30th anniversary, next generation CO e sensors are introduced. 2011 The COMTEC 600E is introduced. The 20 000th O 2 sensor and the 25th CEMTEC are delivered. 2014 ENOTEC REMOTE is launched - Remote control of all ENOTEC analyzers using a phone / tablet. 2015 The ENSITU 7000 transmitter-probe is market-ready. The ENOTEC OOO subsidiary is established. 2017 The new ENOTEC factory with over 4000 m 2 is completed.

EnoTEC WoRlDWIDE 5 enotec worldwide GloBal support since its inception in 1980, ENOTEC has continually expanded, not only its product range but also its global expertise and availability. ENOTEC now has four international subsidiaries in the UK, Usa, singapore and minsk. In addition, ENOTEC has a multitude of distributors on 5 continents. This product and application knowledge combined with local know-how in their various countries ensures that ENOTEC distributors are able to offer solutions for all measurement applications. Having completed factory training in ENOTEC s Germany HQ in marienheide, all distributors are able to provide technical support for ENOTEC products in all applications.

6 oxitec oxitec 5000 oxygen analyzers The OXITEC 5000 o 2 analyzer system is the reference product for all Insitu o 2 analyzers on the market. Its unbeatable robustness, process response time, accuracy and versatility make it the # 1 choice for almost all o 2 process measurement and CEms applications - even in most aggressive processes. OXITEC analyzers range from budget friendly ECONOMY analyzers to atex certifi ed Dust Ex and Gas Ex analyzers and all include the OXITEC o 2 sensor which is reliable & robust like no other, designed and manufactured to withstand aggressive gases, high dust concentration and high vibration processes. BENEFITS: > Worldwide 2 year complete system warranty > Maintenance free due to highest quality probe material (DIN 1.4571 / SS316Ti) > Most robust probe construction, designed for demanding processes. Also designed to withstand high vibration applications Up to 10 years life time > Complete system as standard no hidden costs (Abrasion Shield - Protection Tube - Pneumatics etc.) included > Equipped with a secure ENOTEC REMOTE interface as standard, incl. smartphone App free of charge for highest ease of use DEVELOPED AND MANUFACTURED IN GERMANY sme-53 electronic unit and KEs-5001 probe

ComTEC 7 comtec 6000 o 2 and co e analyzers COMTEC 6000 measures o 2 and Co e * Insitu! This enables redundant process control measurement with high accuracy in real time. The additional Co e sensor detects all unburned components (Co, H 2, C x H y ) for optimal combustion control - as a result fuel consumption and emissions are reduced. For process measurements it is important to measure Co e, not only Co: 10% after combustion, many fuels produce H 2, CH 4 etc. which cannot be detected by a Co measurement alone. These components in higher concentrations are the result of a poor combustion. The COMTEC 6000 analyzer range includes atex and safe area systems. BENEFITS: > Measuring O 2 and CO e InSitu is highly cost effective with low maintenance compared to an expensive extractive system > CO e sensor with low SO 2 crosssensitivity for many applications > Most robust probe construction. Designed for demanding processes. Also designed to withstand high vibration applications COe 5% O2 > Robust and proven O 2 MLT sensors included as standard λ = 1 25% achieve optimal combustion control. > Equipped with secure ENOTEC REMOTE interface as standard, incl. smartphone App free of charge for highest ease of use *Co and equivalent sme-5d electronic unit and KEX-6001 o 2 / Co e probe

8 CEmTEC cemtec patented, self-cleaning, MainTenance-free kiln probe system CEMTEC is a robust self-cleaning analyzer system for the most demanding of applications; Continuous measurement in cement / lime kiln inlets or for other high temperature, high dust applications such as in the steel industry. The self-cleaning functions include CEMTEC s rotating probe tube, for removal of build-up to prevent sticking and to ensure that the probe is heated homogenously to prevent thermal deformation. The probe fi lter/plunger keeps the inlet free of plugging and the powerful air booster keeps the large fi lter free from blockages. These freely programmable features combined with unparalleled mechanical robustness makes CEMTEC the best choice for process control in cement plants and similar. BENEFITS: > CEMTEC stays in the process continuously! No removal of the probe is required - measuring uptime of 95% during kiln operation > Fuel and emissions reduction coupled with higher product quality > Engineered especially for use of secondary fuels > CEMTEC delivers dust-free process gas for measurement in any process gas e.g O 2, CO NO x. > Continual improvement of the CEMTEC analyzer system makes it the most robust and reliable cement plant probe on the world market The CEMTEC kiln inlet probe.

systec 9 systec system integration for process and cems ENOTEC produces tailor-made system solutions for process control and for CEms. as system integrators, ENOTEC is able to combine its own products with all major analyzer manufacturers to produce CEms and process monitoring systems exactly according to customer specifi cations for projects ranging from single process measurements to turnkey emission measurements. Being DIN ISO certifi ed, ENOTEC uses applicable VDE standards and Usa / EU directives for optimal design, installation and commissioning of analyzer systems. The monitoring of combustion processes ranges from complex analyzer systems for ensuring system safety to systems for compliance with environmental agency regulations such as: > 13. BImSchV - Large combustion and gas turbine plants > 17. BImSchV - Incineration or co-incineration of waste > 27. BImSchV - Cremation facilities > 30. BImSchV - Facilities for biological treatment of waste > TA Luft - Other facilities for compulsory inspection In addition to to the production of CEms, ENOTEC offers installation and commissioning as well as service and maintenance. ENOTEC s qualifi ed service technicians carry out service and maintenance not only for our own products, but from practically all manufacturers of combustion related analyzer equipment. For more informations: www.enotec.de

10 aquatec aquatec h 2 o and o 2 analysis Drying processes are energy intensive! a quick and reliable measurement of the drying progress reduces the drying time considerably and therefore enables energy effi ciency. The AQUATEC 1000 is used for drying processes such as for tobacco / wood or for drywalls / plasterboards. Because of its wet InSitu measurement procedure, the AQUATEC 1000 analyzer is superior to systems with extractive measurement in terms of speed and accuracy In addition, the AQUATEC 2000 analyzer system for process and CEms measures H 2 o and o 2 and provides a gas conditioning system. Customers have the added benefi t of being able to utilize the conditioned process gas for integration of additional analyzers. BENEFITS: > Quick and economical drying processes > Exact and controlled drying for improved product quality > Robust and accurate, for a long life span > Equipped with a secure ENOTEC REMOTE interface as standard, incl. Smartphone App free of charge for highest ease of use sme 53 electronic unit and KEs-1322 probe

EnoTEC REmoTE 11 enotec remote remote control of all enotec analyzers ENOTEC REMOTE ENOTEC has combined the production of high quality gas analyzers with modern and secure communication technology. It is now possible to control ENOTEC analyzers safely and conveniently in hazardous areas (Zone 1 / 2) while still being compliant, as well as in safe areas BENEFITS: > Hands free control of all ENOTEC analyzers while maintaining all safety protocols and procedures. > Easier and even more comfortable handling of ENOTEC analyzers is now possible, enabling you to view process values in real-time on your smartphone > Complete remote control of all functions, incl. remote calibration by smartphone > Save process and analyzer data to your phone or send it to colleagues or to ENOTEC for support. available for your phone and tablet for free.

Höher Birken 6 51709 Marienheide - Germany Tel.: +49(0)226445780 Fax: +49(0)2264457830 info@enotec.com www.enotec.com Alterations and errors reserved.