Silicone Joints > Marine Industry > Engine builders > Industrial verhicles www.amco-europe.eu
Silicone Joints > Straight silicone hoses > Straight silicone reducers > Silicone Elbows 135 > Silicone Elbows 90 > Silicone Elbows 45 > Silicone Joints > Silicone Turbo joints Depending on the pressure, temperature and purpose of the silicone products, we choose the type of silicone, number of layers and type of material for the layers to be used, so that we always have the best product for the job. - Silicone Vinyl Methyl Quality for cooling and heating systems, ozon and age resistance - Silicone Fluor vinyl methyl quality oil and chemical resistance - Polyester layers from 50 Celc. Up to + 180 Celc.c. - Nomex Layers from 50 Celc. Up to + 200 Celc. - Glas fibre layers from 50 Celc. Up to +235 Celc. Because of efforts that are constantly made to improve our products, the data and characteristics indication may be varied without notice, and are therefore not binding on us 2
Silicone flexible pipe connectors TYPE SPC Colour blue: For heating and cooling systems, radiators, air, etc. Colour green: For oil, solvents, chemicals, Drinking water, etc. Temperature range: from -60 C up to +180 C. Maximum working pressure: 4 barg Easy and fast to install with pipe clamps. ID OD Lt Lt L Tangent Inside Diam. ID Ø (mm) Tangent Outside Diam. OD Ø ( mm) Overall Length L (mm) Tangent Length Lt (mm) 34 43 120 45 38 48 120 45 42 52 120 52 48 58 130 52 54 64 150 60 60 70 160 60 76 86 180 60 89 99 200 75 108 118 200 75 114 127 200 75 133 146 200 75 140 154 200 75 3
In principle these connectors are used in cooling circuits of the air charge in turbo systems in engines for industrial vehicles and also at some tender spots in circuits of air containing oil and/or hydrocarbons. Flexible connectors in silicone for turbo systems. TYPE SPC The connectors are at the outside in silicone Vinyl Methyl Quality and at the inside in oilresistant silicone Fluor Vinyl Methyl Quality. Pressure bearing layers in textile and reinforcement rings at the outside in stainless steel. Temperature range: from -60 C up to +200 C. ID Lt Lc Lt L Inside Diameter ID Ø Number of Convolutions Conc. Length Lc (mm) Tangent Length Lt (mm) Overall length L (mm) 50 1 up to 6 (2 conv.) 64 48 100 up to 300 60 1 up to 6 (2 conv.) 64 48 100 up to 300 65 1 up to 6 (3 conv.) 88 56 100 up to 300 70 1 up to 6 (2 conv.) 64 48 100 up to 300 76 1 up to 6 (2 conv.) 64 48 100 up to 300 80 1 up to 6 (3 conv.) 88 56 100 up to 300 85 1 up to 6 (3 conv.) 88 56 100 up to 300 89 1 up to 6 (1 conv.) 38 31 100 up to 300 95 1 up to 6 (4 conv.) 130 40 100 up to 300 100 1 up to 6 (1 conv.) 38 31 100 up to 300 114 1 up to 6 (3 conv.) 88 56 100 up to 300 4
Flexible silicone tubes for heating and cooling systems. TYPE ST3/ST4 The tubes are at the in and outside in silicone Vinyl Methyl Quality. Pressure bearing layers in polyester. Number of layers 3 (type ST3) or 4 (type ST4) The working and burst pressures according to table below increase with 30 to 40 % depending on the diameter for type ST4. Temperature range: from -60 C up to +180 C. Standard overall lengths from 1 up to 4 meters. Custom made lengths can be delivered on request. Ideal for cutting in straight pieces of necessary lengths. Diameter Working Pressure (bar) Working Pressure (bar) Diameter Working Pressure (bar) Working Pressure (bar) ST3 ST4 6 14,8 21,2 8 11,9 17,2 10 10,1 14,7 13 8,3 12,2 16 7,1 10,5 18 6,4 9,6 19 6,2 9,3 22 5,5 8,3 25 5,0 7,6 28 4,6 7,0 30 4,3 6,7 32 4,1 6,4 35 3,8 6,0 38 3,6 5,6 40 3,5 5,4 44 3,2 5,1 45 3,1 5,0 ST3 ST4 48 3,0 4,8 50 2,9 4,6 51 2,8 4,6 53 2,8 4,4 55 2,7 4,3 57 2,6 4,2 60 2,5 4,1 62 2,4 4,0 63 2,4 3,9 65 2,3 3,8 70 2,2 3,6 76 2,0 3,4 80 2,0 3,3 83 1,9 3,2 90 1,8 3,0 100 1,6 2,8 5
Flexible silicone tubes for oil. TYPE ST3-OR The tubes are at the outside in silicone Vinyl Methyl Quality. The inside is made of an oil resistant silicone quality. Pressure bearing layers in polyester. Number of layers 3 The working and burst pressures according to the table of type ST3. Temperature range: from -60 C up to +180 C. Standard overall lengths from 1 up to 4 meters. Custom-made lengths can be delivered on request. Ideal for cutting in straight pieces of the necessary lengths. Flexible silicone tubes for high temperature. TYPE ST3-HT The tubes are made of high temperature silicone quality. Pressure bearing layers in glass fibre. Number of layers 3 The working and burst pressures according to the table of type ST3. Temperature range: from -60 C up to +235 C. Standard overall lengths from 1 up to 4 meters. Custom-made lengths can be delivered on request. Ideal for cutting in straight pieces of the necessary lengths. 6
Very flexible silicone tubes for heating and cooling systems. TYPE ST3-SP The tubes are at the in and outside in silicone Vinyl Methyl Quality. Temperature range: from -60 C up to +180 C. Standard overall lengths from 1 up to 4 meters. Custom-made lengths can be delivered on request. Ideal for cutting in straight pieces on necessary lengths. Concentric reducers with several layers of polyester or aramid fiber to withstand the pressure. From ID Ø 13 mm. up to ID Ø 120 mm. in various length. Elbows 45 / 90 / 135 with several Layers of polyester to withstand the pressure. Available in the diameter ID Ø 6 mm. up to Ø 100 mm. in length from 100 mm, 150 mm. and 200 mm. Straight silicone hose with several polyester layers top withstand the pressure. From ID Ø 6 mm. up to ID Ø 100 mm. Length of 1 meter, but can be cut to smaller lengths to customers wishes. For more detailed information see page 5. Spiral Silicone hose for cooling and heating systems where higher flexibility is required. Available in Diameter ID Ø 10 mm. up to ID Ø 120 mm. Good resisted against ozone, aging, anti-freeze and higher temperature. 7
From our delivery program Stainless steel expansion joints for low pressure systems, such as exhaustgas systems with a large variety of end connections! Custom made or special execution based on the design specifications of the project are no exception for us. Stainless steel corrugated hoses with or without a stainless steel braiding. Availale in several stainless steel quality s. Stainless steel corrugated hoses with or without a stainless steel braiding for low pressure or exhaustgas purposes and higher temperatures with end connections according the customers specification. Standard rubber expansion joints in several rubber quality s such as EPDM, Nitril Butyl, Neoprene or Viton, in several standard installation length. And end connections according to DIN, ANSI, or JIS. Rubber expansion joints for power plants, special design, hand build joints. With calculated supports such as Tie-bars with spherical bearings, retaining rings and vacuum rings. AMCO Europe B.V. AMCO Europe B.V. Kiotoweg 361 3047 BG Rotterdam The Netherlands Tel. : +31 (0)10 28 60 244 Fax : +31 (0)10 28 60 234 E-mail : info@amco-europe.eu Web : www.amco-europe.eu