www.ntf.dk Hygienic modular guarding in stainless steel GB
Comp-Line stainless steel modular guarding HYGIENIC AREA GUARDING Comp-Line is a series of modular machine guarding for the food industry that satisfies the requirements for hygiene, ease of cleaning and safety. Comp-Line is a complete stainless steel system for machine protection and guarding. EASILY ADJUSTED ON SITE Comp-Line is a system that is easy to install, and uniquely it can be adjusted in both height and length on site according to specific needs and wishes. Comp-Line also allows for any holes or cut-outs you might need to make in your guarding. Such flexibility helps ensure that you always get the best possible individual solution for machine protection and guarding. Furthermore, Comp-Line has been impact tested to withstand loads of 1600 joules. We offer fast delivery of our modular guarding, which are compliant with existing requirements for finger, hand and arm protection.
Certainty of supply and top quality SLIDING DOOR SYSTEM Hygienic and easily cleaned sliding door system No horizontal surfaces The large rolling surface provides optimal service life and stability The solid and simple locking mechanism ensures effective closure of the sliding door 2000 MM STANDARD MODULE LETTER DESCRIPTION DIM. IN MM A Door module 1085 B Door width 1000 C Module 2000/1000 D Mesh width 923/1923 E Mesh height 1870 F Post height 2000 G Clearance 130 Type: MESH 135-20 Type: WIRE Ø3 mm and Ø4 mm 2400 mm available on request.
Effective products with a long service life EASY ASSEMBLY All joints are made with flange bolts and spacers Optional threaded rods for raising off the floor The accompanying spacers ensure optimal hygienic assembly CLOSED PROFILES Easy assembly No horizontal surfaces Meets the requirements of DS/EN ISO 13857-2008 Standard height of 2000 mm Modular design Easy assembly and installation Built in AISI 304, 1. cl. pickled Available in AISI 316 on request UNIQUE ASSEMBLY The simple system design means that it can be assembled by just one person, thanks to the unique assembly method. Meets the requirements of annex 1, item 1.4.2.1 of the Machine Directive. The fixing system must remain attached to either the guarding or the post Tools must be used for disassembly Fixed guarding must be incapable of remaining in place without their fixings
High-Line modules for better hygiene and safety EFFECTIVE AND HYGIENIC CLEANING High-Line is a series of modularly built machine guarding and protection for the food and pharma industries that is designed to combine hygiene and safety. High-Line is easy to install and adapt, both in height and length, according to your needs and wishes. The system utilises open profiles and consists of a welded mesh of stainless steel with no horizontal surfaces to collect impurities. This design ensures particularly effective and hygienic cleaning of High-Line, which is absolutely critical in the food and pharma industries. Furthermore, High-Line has been impact tested to withstand loads of 1600 joules. Our modular guarding is designed and built in accordance with existing requirements for finger, hand and arm protection. We provide fast delivery and adapt with bends, cut-outs and fittings.
Wide variety of high-stability products SLIDING DOOR SYSTEM Hygienic and cleaning-friendly sliding door system No horizontal surfaces The large rolling surface provides optimal service life and stability The solid and simple locking mechanism ensures effective closure of the sliding door 2000 MM STANDARD MODULE LETTER DESCRIPTION DIM. IN MM A Door module 1106 B Door width 1000 C Module 1106/706/406 D Mesh width 1000/600/300 E Mesh height 1870 F Post height 2000 G Clearance 130 Type: MESH 135-20 Type: WIRE Ø3 mm and Ø4 mm Available in heights of 2500 and 2700 mm on request.
Hygienic design and high functionality EASY ASSEMBLY All joints are made with flange bolts and spacers Optional threaded rods for raising off the floor Even for installations not raised off the floor, effective hygienic cleaning is made possible, thanks to the patented design Comes with spacers, to ensure optimal hygienic conditions in high risk zones NO CLOSED PROFILES Easy assembly No horizontal surfaces Meets the requirements of DS/EN ISO 13857-2008 Standard height of 2000 mm Modular design Easy assembly and installation Built with AISI 304, 1. cl. pickled Available in AISI 316 on request NEW ASSEMBLY METHOD The simple system design means that it can be assembled by just one person, thanks to the newly designed assembly method. Meets the requirements of annex 1, item 1.4.2.1 of the Machine Directive. The fixing system must remain attached to either the guarding or the post Tools must be used for disassembly Fixed guarding must be incapable of remaining in place without their fixings
WWW.NTF.DK NTF Aalborg A/S is a leading stainless steel factory specialising in round steel, mesh and wire. We are a dynamic and innovative niche company with a unique team of dedicated, professional and skilled employees. We have solid references in the pharmaceutical and food industries, to which we deliver customer-tailored solutions of the highest quality. With NTF on your team, you are guaranteed a lasting partnership and professional advising. At www.ntf.dk you will find a full overview of our product programme, new products and our offer of the month. PROCESS EQUIPMENT An extensive range of racks, baskets and other customer-specific solutions made of stainless wire and round steel, with focus on handling and refinement, primarily for the food and pharmaceutical industries. All-welded solutions in a hygienic and cleaning-friendly design. EQUIPMENT AND HYGIENE The NTF Hygiene range includes products for, e.g. hygiene sluices, racks for clothing, helmets and hearing protection, footwear, hose holders and waste baskets. The wide product range that combines innovative design and high functionality. All products feature a hygienic stainless steel design. SUBCONTRACTING WORK NTF has special expertise in wire and round steel for the industry, machine and system manufacturers and forging companies, offering, for instance 3D round steel bending, wire straightening, CNC spot-welding, TIG welding and more. We focus on product development, technical knowhow and cooperation with customers. NTF-Aalborg A/S Hagensvej 17 DK-9530 Støvring Tel +45 9837 3766 Fax +45 9837 3751 mail@ntf.dk www.ntf.dk Version 2017-02