An extensive range for all applications Adhesive and Thermal Seals ADHESIVE SEALS FluidX offer a wide selection of adhesive seals suitable for use on most manual, automated or semi-automated adhesive sealing systems. Standard foil seals, which can be either peeled or pierced, ideal for low temperature storage. Transparent and foil seals for PCR. Economical transparent seal for temporary storage of aqueous samples. Optically clear seals that are perfect for QPCR and fluorescence, available with a non-sticky pressure-sensitive adhesive for ease of use. Gas permeable seals, impervious to fluids, which enhance cell growth. Silicone foil, available in peelable or piercable versions, that demonstrates excellent solvent resistance and is ideal for use with plates containing DMSO. Black PE foil for light sensitive applications. DMSO-resistant gold foil seal. All seals are available in a choice of sizes, pre-cut sheets or roll format.
ADHESIVE SEALS DESCRIPTION Adhesive PCR transparent seals Clear film with good solvent resistance. Peelable. Applications: PCR. Economy adhesive transparent seals Cat No 41-1001 Precut (117mm* x 80mm, 100 sheets) 40-1006 (90mm x 100m) roll for X-Seal Manual Adhesive Sealer 40-1008 (90mm x 100m) roll for Abgene Seal-It100 41-1002 Precut Clear film with no solvent resistance. Temp range -20 to 120 o C. Not gas permeable. Peelable. Applications: Temporary storage of aqueous samples. Not recommended for PCR or low temperature storage. Adhesive PCR foil seals Temp range -20 to 150 o C. Not gas permeable. Peelable and pierceable. Applications: PCR. 41-1003 Precut (122mm* x 80mm, 100 sheets) 40-1009 (90mm x 100m) roll for Abgene Seal-It100 Adhesive clear seals for QPCR and fluorescence Optically clear film with good solvent resistance. Temp range -80 to 110 o C. Not gas permeable. Peelable and pierceable. Applications: QPCR, fluorescence, crystallography and genotyping. 41-1004 Precut (120mm* x 80mm, 100 sheets) 40-1007 (90mm x 100m) roll for X-Seal Manual Adhesive Sealer 43-1032 (500m x 115.5mm) for Velocity 11 Non-sticky pressure-sensitive adhesive. Gas permeable adhesive membrane Non-woven cream membrane. No solvent resistance. Temp range 10 to 120 o C. Gas permeable but impervious to fluids. Peelable. Applications: Enhances cell growth. Suitable for use in autoclave and similar equipment. 41-1005 Precut (132mm* x 80mm, 50 sheets) 40-1005 (81mm x 100m) roll for X-Seal Manual Adhesive Sealer, with adapter Adhesive silicone foil, pierceable Foil with excellent solvent resistance. Pierceable. Applications: Ideal for sealing plates containing DMSO 41-1006 Precut 40-1011 (81mm x 150m) roll for X-Seal Manual Adhesive Sealer, with adapter Adhesive silicone foil, peelable Foil with excellent solvent resistance. Peelable. Applications: Ideal for sealing plates containing DMSO. 41-1007 Precut (122mm* x 80mm, 100 sheets) 40-1012 (81mm x 150m) roll for X-Seal Manual Adhesive Sealer, with adapter Non-sticky pressure-sensitive adhesive. * size when adhesive strip removed Tel:+44 (0) 1625 861614 Email:info@fluidx.co.uk www.fluidx.co.uk
ADHESIVE SEALS cont.. DESCRIPTION Adhesive polyoelfin film Clear film with good solvent resistance. Temp range -25 to 120 o C. Not gas permeable. Peelable. Applications: No contact between sample and adhesive. Use for imaging and protein crystallography applications. Cat No 41-1008 Precut (120mm* x 80mm, 100 sheets) 40-1003 (90mm x 100m) roll for X-Seal Manual Adhesive Sealer Non-sticky pressure-sensitive adhesive. Standard adhesive foil, pierceable Pierceable. Applications: Suitable for microplate storage at low temperatures, PCR. Standard adhesive foil, peelable Peelable. Applications: Suitable for microplate storage at low temperatures. PCR. Black PE foil Black foil with good solvent resistance. Temp range -40 to 80 o C. Not gas permeable. Peelable. Applications: Ideal for light-sensitive applications. 41-1009 Precut 40-1002 (90mm x 100m) roll for X-Seal Manual Adhesive Sealer 41-1010 Precut 40-1001 (90mm x 100m) roll for X-Seal Manual Adhesive Sealer 41-1011 Precut (142mm* x 80mm, 50 sheets) 40-1010 Foam-backed seal for PCR 41-1012 Precut (50 sheets) Cream foam. No solvent resistance. Temp range -20 to 40 o C. Not gas permeable. Peelable. Applications: 3M seal for PCR. Gas permeable adhesive seal 41-1013 Precut (122mm* x 80mm, 50 sheets) Cream seal. No solvent resistance. Temp range 10 to 120 o C. Gas permeable. Peelable. Applications: Able to place temporary seal over top for transportation. Gas permeable polyolefin film, pre-pierced Clear film with good solvent resistance. Temp range -25 to 120 o C. Gas permeable. Peelable. Applications: Particularly suitable for imaging and protein crystallography applications. DMSO-resistant foil Gold seal with excellent solvent resistance. Temp range -85 to 120 o C. Not gas permeable. Peelable. Applications: Compound storage. 41-1014 Precut (126mm* x 80mm, 50 sheets) 40-1004 (90mm x 150m) roll for X-Seal Manual Adhesive Sealer 41-1015 Precut (122mm* x 80mm, 100 sheets) 40-1013
THERMAL SEALS FluidX offer a wide selection of thermal seals suitable for use on most manual, automated or semi-automated thermal sealing systems. EZ peel foil, resistant to DMSO, which is peelable direct from freezer. Ideal for low temperature storage. EZ pierce foil with good solvent resistance that can be pierced with tip. Suitable for PCR and compound storage. Crystal Clear peelable film, ideal for QPCR and fluorescence. Thermal bond heavy duty foil for long term sample storage. Suitable for use with DMSO and hazardous materials. DMSO-resistant peelable foil. All seals are available in a choice of sizes, pre-cut sheets or roll format. FluidX reserve the right to update and change product information without notice. FluidX Ltd. 2009.
THERMAL SEALS DESCRIPTION EZ peel, peelable heat seal for polypropylene plates Foil. Resistant to DMSO at less than 4 o C Temp range -90 to 120 o C. Not gas permeable. Peelable direct from freezer. Cat No 44-1001 Precut 43-1021 (500m) roll for ALPS100 43-2021 (25m) sample roll for ALPS100 43-1001 (610m x 78mm) roll for ALPS300/3000 43-2001 (25m) sample roll for ALPS300/3000 Applications: Low temperature compound storage, short-term room temperature storage. PCR. Seals can be re-applied. EZ pierce 20um, pierceable seal for polypropylene plates Pierceable with tip. 44-1002 Precut 43-1005 (610m x 78mm) roll for ALPS300/3000 43-2005 (25m) sample roll for ALPS300/3000 43-1007 (500m x 115.5mm) roll for PlateLoc 43-2007 (25m) sample roll for PlateLoc Applications: Compound storage, sample shipping, PCR. Can re-seal over existing seal. A thinner version of Cat No 44-1004. Crystal clear peelable seal Clear film with moderate solvent resistance. Peelable Applications: Use with polypropylene plates, good optical clarity. Suitable for QPCR, fluorescence. EZ pierce seal for polypropylene plates Pierceable with tip. Peelable 44-1003 Precut 43-1008 (500m x 78mm) roll for ALPS300/3000 43-2008 (25m) sample roll for ALPS300/3000 43-1010 (500m x 115.5mm) roll for PlateLoc 43-2010 (25m) sample roll for PlateLoc 44-1004 Precut 43-1012 (610m x 78mm) roll for ALPS300/3000 43-2012 (25m) sample roll for ALPS300/3000 43-1020 (500m x 115.5mm) roll for PlateLoc 43-2020 (25m) sample roll for PlateLoc Applications: Compound storage, sample shipping, PCR. Suitable for use with DMSO. Can add a secondary seal for transportation. Crystal weld seal Clear film with good solvent resistance. Not peelable or pierceable. 44-1005 Precut 43-1015 (610m x 78mm) roll for ALPS300/3000 43-2015 (25m) sample roll for ALPS300/3000 Applications: Optically clear for visual inspection. Suitable for use with DMSO and hazardous materials.
THERMAL SEALS cont.. DESCRIPTION Thermal bond heavy duty foil Temp range -20 to 120 o C. Not gas permeable. Peelable Applications: A long term seal. Suitable for use with DMSO and hazardous materials. Cat No 44-1006 Precut 43-1017 (500m x 78mm) roll for ALPS300/3000 43-2017 (25m) sample roll for ALPS300/3000 43-1019 (500m x 115.5mm) roll for PlateLoc 43-2019 (25m) sample roll for PlateLoc Gas permeable heat seal Non-woven cream seal with no solvent resistance. Temp range 10 to 120 o C. Gas permeable. Peelable 44-1007 Precut Available for use on ALPS300/3000 Applications: Gas permeable membrane that provides a barrier to solid contaminants. Suitable for cell culture. Seals polystyrene and polypropylene plates. DMSO resistant peel seal Foil with excellent moderate solvent resistance. Peelable Applications: Compound storage with DMSO, low and room temperature. Clear seal for ABI3730 sequencer Clear thin film. Not gas permeable. Applications: PCR sequencing 44-1008 Precut 43-1030 (500m x 78mm) roll for ALPS300/3000 43-2030 (25m) sample roll for ALPS300/3000 43-1031 (500m x 115.5mm) roll for PlateLoc 43-2031 (25m) sample roll for PlateLoc Also available in REMP format 43-1011 (610m x 78mm) roll for ABI3730 sequencer 43-2011 (25m) sample roll for ABI3730 sequencer ABgene ALPS 3000 TM ABgene ALPS 300 TM V11 PlateLoc TM FluidX reserve the right to update and change product information without notice. FluidX Ltd. 2009.
ADHESIVE SEALS OVERVIEW DESCRIPTION PRECUT ROLLS FURTHER DETAILS APPLICATIONS X-Seal Manual and Automated Adhesive Sealers X-Seal Automated Adhesive Sealer and Abgene fomat Appearance Solvent resistance Temperature range C Gas permeable Peelable/ Pierceable Adhesive PCR seals, transparent, peelable 41-1001 (117mm* x 80mm, 100 sheets) 40-1006 (90mm 40-1008 (90mm Clear film Good -80 to 120 No Peelable PCR Adhesive, transparent seal for PP and PS plates. (A less expensive version of 41-1001) 41-1002 Clear film None -20 to 120 No Peelable Temporary storage of aqueous samples. Not recommended for PCR or low temperature storage. Adhesive, transparent seal for PP and PS plates. (A less expensive version of 41-1001) 41-1003 (122mm* x 80mm,100 sheets) 40-1009 (90mm x200m) Foil Good -20 to 150 No Peelable and Pierceable PCR. Adhesive clear seals for QPCR and fluorescence applications 41-1004 (120mm* x 80mm, 100 sheets) 40-1007 (90mm Optically clear film Good -80 to 110 No Peelable and Pierceable Suitable for QPCR, fluorescence, crystallography and genotyping applications. Non-sticky, pressure-sensitive adhesive. Adhesive silicone foil, high solvent resistance, Pierceable 41-1006 40-1011 with adapter (81mm x 150m) Foil Excellent -80 to 120 No Pierceable Ideal for sealing plates containing DMSO. A bestseller! Adhesive silicone foil, high solvent resistance, peelable 41-1007 (122mm* x 80mm,100 sheets) 40-1012 with adapter (81mm x 150m) Foil Excellent -80 to 120 No Peelable Ideal for sealing plates containing DMSO. Nonstick, pressuresensitive adhesive. A best-seller! Adhesive polyolefin film, peelable, solvent resistance 41-1008 (120mm* x 80mm, 100 sheets) 40-1003 (90mm Clear film Good -25 to 120 No Peelable No contact between sample and adhesive. Nonsticky, pressuresensitive adhesive. Particularly suitable for imaging and protein crystallography. Standard adhesive foil, Pierceable 41-1009 40-1002 (90mm Foil Good -80 to 120 No Pierceable Standard Pierceable foil, suitable for microplate storage at low temperatures. PCR. Standard adhesive foil, peelable 41-1010 40-1001 (90mm Foil Good -80 to 120 No Peelable Standard peeling foil, suitable for microplate storage at low temperatures. PCR. Black PE foil, light resistant, solvent resistant, peelable 41-1011 (142mm* x 80mm, 50 sheets) 40-1010 Black Good -40 to 60 No Peelable Ideal for light sensitive applications PQ foam-backed seal for PCRresistant, peelable 41-1012 (50 sheets) Cream foam None -20 to 40 No Peelable 3M seal for PCR. DMSO-resistant adhesive foil, peelable 41-1015 (122mm* x 80mm, 100 sheets) 40-1013 Gold Excellent -80 to 120 No Peelable Compound storage. Gas permeable adhesive membrane, impervious to fluids. 41-1005 (132mm* x 80mm, 50 sheets) 40-1005 with adapter (81mm x 100m) Non-woven, cream None 10 to 120 Yes but impervious to fluids Peelable Gas permeable membrane for enhanced cell growth. Suitable for use in autoclave and similar equipment. Gas permeable adhesive seal 41-1013 (122mm* x 80mm, 50 sheets) Cream None 10 to 120 Yes Peelable Able to place a temporary seal over the top for transportation Gas permeable adhesive polyolefin film, pre-pierced for gas exchange 41-1014 (126mm* x 80mm, 50 sheets) 40-1004 (90mm vvv Clear film Good -25 to 120 Yes Peelable Particularly suitable for imaging and protein crystallography applications. Pre-pierced foil ensures good gas exchange.
THERMAL SEALS OVERVIEW DESCRIPTION PRECUT ROLLS FURTHER DETAILS APPLICATIONS X-Seal Manual Thermal Sealer X-Seal Automated Thermal Sealer and ALPS 300/3000 PlateLoc format Appearance Solvent resistance Temperature range C Gas permeable Peelable/ Pierceable EZ Peel, peelable heat seal for polypropylene plates. 44-1001 43-1001 (610m x 78mm), 43-2001 Foil Resistant to DMSO at < 4 C -90 to 120 No Peelable direct from freezer. Good barrier to aqueous solutions. Low temperature compound storage, short term room temperature compound storage, PCR. Seals can be re-applied. EZ Pierce 20um, pierceable seal for polypropylene plates. 44-1002 43-1005 (610m x 78mm), 43-2005 43-1007 (500m x115.5mm), 43-2007 Foil Good -80 to 120 No Pierceable with tip Compound storage, sample shipping, PCR. Can reseal over existing seal. (Thinner version of 44-1004). EZ Pierce foil heat seal 44-1004 43-1012 (610m x 78mm), 43-2012 43-1020 (500m x115.5mm), 43-2020 Foil Good -80 to 120 No Can be pierced with tip. Peelable For pp plates. Compound storage, sample shipping, PCR. Suitable for use with DMSO. Can add a secondary seal over the top for transportation. Thermal bond, heavy duty foil 44-1006 43-1017 (500m x 78mm), 43-2017 43-1019 (500m x115.5mm), 43-2019 Foil Good -20 to 120 No Peelable A long term seal. Suitable for use with DMSO and hazardous materials Cristal clear seal, peelable seal. Good optical clarity. 44-1003 43-1008 (500m x 78mm), 43-2008 43-1010 (500m x115.5mm), 43-2010 Clear film Moderate -80 to 120 No Peelable Use with polypropylene and polystyrene plates, Good optical clarity. Suitable for QPCR, fluorescence. Clear weld seal 44-1005 43-1015 (610m x 78mm), 43-2015 Clear film Good -80 to 120 No No Optically clear for visual inspection. Suitable for use with DMSO and hazardous materials. Gas permeable heat seal 44-1007 Available Non-woven, cream None 10 to 120 Yes Peelable Gas permeable membrane that provides a barrier to solid contaminants. Suitable for cell culture. Seals polypropylene and polystyrene plates. DMSO resistant peel seal 44-1008 43-1030 (500m x 78mm), 43-2030 43-1031 (500m x 115mm), 43-2031 (sample roll, also available in REMP format) Foil Excellent -80 to 120 No Peelable Compound storage with DMSO, low and room temperature. Clear seal for ABI 3730 sequencer 43-1011 (610m x 78mm) for ABI3730 sequencer, 43-2011 Clear thin film No PCR sequencing. EZ Peel, peelable heat seal for polypropylene plates also available for use with ALPS 100 sealer. Cat No 43-1021 (500m roll), and 43-2021.