ENDURACLAD INTERNATIONAL PTY LTD Head Office: 41 Roscoe Street, Henderson WA 6166 Phone: (08) 9437 4506 E-mail: sales@enduraclad.com.au
j Where Quality follows Integrity ENDURACLAD INTERNATIONAL PTY LTD Advanced Ceramics and Ultra-High Performance Polymer Linings 1
WWW... ENDURACLAD INTERNATIONAL PTY LTD Advanced Ceramics and Ultra-High Performance Polymer Linings 2
protecting areas with extreme sliding abrasion from bulk material handling, particularly with Coal and Ore minerals. Advanced ceramics have many advantages over steel products. Low Cost The cost for lining a chute with ceramic is considerably less than what you would expect to pay for in steel. Enduraclad International Pty Ltd have increased their portfolio by introducing a new and exciting range of products made from advanced ceramics and high performance polymer linings. These products come from ECI s Enduratile range and have already shown great success with established clients. Enduraclad International Pty Ltd are Australia s fastest growing wear plate supplier and manufacturer of high quality products which include a range of Steel, Ceramic and Polymer linings. Supplying wear products to Australia s most reputable mining companies and working with world leaders in wear resistant materials guarantees excellent quality and complete satisfaction from new and existing customers. ECI is a local supplier which enables us to provide quick response and delivery times for all our customers. Our experienced staff and quality control methods ensure us to provide the highest quality products with excellent results. Less Weight Ceramic tiles weigh approximately 56% less than steel. In perspective, if an area of 6m² was lined with 25mm thick steel it would weigh approximately 1147kg whereas ceramic would weigh only 505kg. Ceramic reduces the constant load on equipment and makes installation easier. Productivity The ceramics extreme hardness and smooth surface allows for superior material flow resulting in an increase in production, efficiency and reducing the risk of product hang ups. Long Life Our ceramic tiles contain 92% pure aluminum oxide, a material well known for its crystalline structure found similarly in diamond. This gives the ceramic an incomparable resistance to wear caused from constant abrasion. Turn over to page 3 to see ECI s diverse range of advanced ceramic products available In applications subject to high wear and impact abrasion, ECI can provide your business with alternative cost effective solutions to extend the life of your investment, increase productivity and reduce maintenance costs. have proven to be the frontrunner in wear protection, typically outlasting Ni- Hard by more than 5 times the life expectancy. Ceramic wear liners are now in high demand for ENDURACLAD INTERNATIONAL PTY LTD Advanced Ceramics and Ultra-High Performance Polymer Linings 3
are the latest edition to the Enduratile product range. ECI focuses on constant research and development on their polymer products. After a series of tests and trials performed we have established a polymer material that has a wear life many times greater than that of wear resistant rubber and any other polymer based material in the Australian market, it s even got a wear life expectancy greater than steel! A team of experts have specially formulated a polymer matrix that has the abrasion resistance comparable to Ni-Hard and the impact resistance many times greater than rubber. Most of all, there are NO health risks associated with our product! Endurathane is a revolutionary product that will save your company from spending excessive amounts of money on capital outlays. Because of its versatility, Endurathane is available in many forms and can be applied to any type of steel surface in both wet and dry environments. Tests show that Endurathane has the dynamics to replace steel lining in areas subject to high impact, sliding/impinging abrasion, corrosion and in temperatures up to 170 C. Endurathane is sourced in Australia and produced locally at Enduraclad Internationals Henderson facility. Enduraclad International Pty Ltd, Henderson WA 6166 Endurathane has the physical attributes superior to rubber and the chemical balance of high quality plastics, making it the most versatile product available in the Australian market. Compared to steel, Endurathane has considerable economic advantages. Low Cost Endurathane is very cost effective and is only a fraction to what you d expect to pay for steel product. Less Weight Endurathanes lightweight molecules make handling incredibly easy, weighing a mere 28kg per square meter. Based on 25mm thickness Long Life Test results show Endurathane can typically outwear steel by as much as 3 times (ASTM G65) Applicability Endurathane is flexible and can be adhered to any flat or curved steel surface. In most cases, achieving a bond tensile strength exceeding a whopping 30+MPa! Turn over to page 5 to see ECI s range of High Performance Polymer products available ENDURACLAD INTERNATIONAL PTY LTD Advanced Ceramics and Ultra-High Performance Polymer Linings 4
ECI manufacture and stock a variety of alumina ceramic products. Each product is uniquely designed to exhibit specific characteristics required to perform in many different fields of applications. Is a cost effective method used to glue wear resistant alumina ceramic directly to a steel surface using specially formulated Epoxy resins. This method has been used for many years and has proven to work extremely well in pipes and in applications subject to sliding abrasion of fine grains with little to no impact. Technical Data Unit Value Alumina % 91-92 Hardness N/mm² (GPa) 9900 (9.9) Vickers Bulk Density g/cm³ 3.61 Fracture Toughness Compression Strength 20 c MPa 3.75 GPa 1.77 Before After Direct Bonding can also be supplied in the form of liners. Alumina ceramic tiles are glued to a 250 grade steel backing plate to which studs are welded to for where bolt on installations are required. Neoprene rubber is fitted to the top of the backing plate and sides of the ceramic to reduce vibration and noise in operation and to avoid damage during transportation and installation. Reclaimer Buckets for BHP fitted with Enduratile alumina ceramic. Enduratile Direct Bond Pipe Liners for Rio Tinto slurry feeder. ENDURACLAD INTERNATIONAL PTY LTD Advanced Ceramics and Ultra-High Performance Polymer Linings 5
offer superior wear and impact protection, typically outlasting metallic linings such as Chromium Carbide by more than 10 times. Combining hard wearing ceramic tiles with a durable polymer matrix proves to be a great solution for protecting capital investments. The Enduratile modern design consists of extremely wear resistant ceramic tiles bonded to a 250 grade steel plate, protected with a highly durable polyether material. Each liner is baked at high temperatures to maximize physical and mechanical properties whilst achieving superior bond strength between the urethane, steel and ceramic. The ceramic tiles are uniformly arranged to suit the flow direction in each application. This reduces the channeling effect of the polyurethane, which sometimes can result in damaging the ceramic tile. E9500 ceramic wear liners are laid out and QA approved before being fitted to transfer chute. E9500 Ceramic Wear Liner The E9500 was developed as an all-rounder and is ECI s most requested ceramic wear liner. The polymers excellent physical qualities provide support for the ceramic tiles during operation and able to withstand the rigorous conditions found in most types of applications. E8500 Ceramic Wear Liner The E8500 has a softer polymer coating to complement heavy impact from larger media in the bulk materials handling sector. The polymers high tensile strengths and abrasion resistance ensures a long lasting product. CHARACTERISTICS Outstanding Abrasion Resistance Good Impact Tolerance Superior Bond Strength Excellent Flow Performance Long Wear Life Any Shape or Size Lightweight APPLICATION TYPES Feeders Deflector and impact plates Shiploaders Reclaimers Ball mills Chutes Bin linings CHARACTERISTICS High Impact Tolerance Excellent Abrasion Resistance Outstanding Bond Strength Excellent Flow Performance Long Wear Life Any Shape or Size Lightweight APPLICATION TYPES Feeders Deflector and impact plates Shiploaders Reclaimers Ball mills Chutes Bin linings ENDURACLAD INTERNATIONAL PTY LTD Advanced Ceramics and Ultra-High Performance Polymer Linings 6
ES8500 IMPACT Ceramic Wear Liner ES8500 IMPACT liners are designed to withstand heavy impact during material transfer. These liners consist of extremely dense, hexagonal shaped ceramic tiles coated in a rubber like polymer material to absorb forceful energy. The small ceramic tiles allow the weight and force from the impact to distribute over a series of tiles rather than just the one, significantly reducing the risk of fracture. E9500 Ceramic wear liners installed in chute at ECI. CHARACTERISTICS Very High Impact Tolerance Good Abrasion Resistance Outstanding Bond Strength Long Wear Life Any Shape or Size Lightweight APPLICATION TYPES Deflector and impact plates Feeders Hoppers Loaders Bin linings Head Chute from Rio Tinto arrived at ECI for maintenance. Before After Insert Photo of chute complete with ceramic tiles lined. Nasty blowout: Lined with competitors chromium carbide wear plate. Head chute refurbished and lined with ECI s E9500 and ES580 IMPACT product from their Enduratile range ENDURACLAD INTERNATIONAL PTY LTD Advanced Ceramics and Ultra-High Performance Polymer Linings 7
is a family of ultra-high performance polymer linings available from our Enduratile range. Endurathane is perfect for companies seeking a low cost, low maintenance solution for wear and corrosion protection. Endurathanes versatility and exceptional dynamic properties will prove to outlast abrasion resistant rubber ten-fold, making it the most advanced polymer based lining available in Australia. Endurathane can be supplied in Black, Blue, Yellow, Green, Orange and Red. (Please contact ECI on availability) Endurathane Sheets are available in the following sizes: Typical Dimensions* Typical Thicknesses* 1000 x 1000 mm 1200 x 2400 mm 10 30 mm 1800 x 3600 mm *Size and thickness can be tailored to suit your requirements. Please contact ECI if you wish to make a special order. UHPS7000 High Performance Polymer Lining UHPS7000 is our softest available polymer lining, ideal for dampening and absorbing impact during bulk material handling and transportation. The materials strong crosslink structure allows it to flex without stretching or losing shape. Recommended Fields of Application: Conveyors Bins and Hoppers Bed Linings Skirting Curtains UHPS8500 High Performance Polymer Lining UHPS8500 is our most abrasive resistant polymer lining, comparable to that of Ni-Hard. UHPS8500 is virtually unbreakable and will perform remarkably in high impact areas. Recommended Fields of Application: Chute Linings Bins and Hoppers Mining Vehicle Linings Pipelines Bucket Linings Feeders Conveyors ENDURATHANE TECHNICAL DATA SHEET UHPE5300 High Performance Polymer Lining UHPE5300 has a very low co-efficient of sliding friction which is used particularly in areas in transport and storage of wet or glutinous materials. Recommended Fields of Application: Bins and Hoppers Mining Vehicle Linings Transport Industry Pipelines Product Code: Specific Gravity Shore Hardness Tensile Strength Bashore Rebound DIN Abrasion Loss Elongation at Break Temperature Range Corrosion Resistant (g/cm³) (A/D) (MPa) (%) (mm³) % C Y/N UHPS8500 1.15 85A 36.6 55 12 590-210 to +155 Y UHPS7000 1.16 70A 20.3 58 17 915-200 to +140 Y UHPE5300 1.12 53D 37.9 52 45 450-230 to +155 Y Above values are based on typical results. ENDURACLAD INTERNATIONAL PTY LTD Advanced Ceramics and Ultra-High Performance Polymer Linings 8
The installation of linings is a significant part to protecting an application. How you do it may be the difference between a satisfactory wear life and an exceptional wear life. ECI have a team of experienced personnel at their Henderson facility who can retro fit your application to ensure linings are installed correctly in order to achieve a sustainable wear life. Stud Welding Adhering Endurathane sheeting with a thickness less than 25mm can be directly glued to an application with a steel surface. The surface must be grit blasted and cleaned of greases and removal of any visible oxidation. A high strength glue, specifically formulated for adhering rubber plastics to steel is applied to the back of the lining and pressed onto the structure. The glue requires a minimum of 24 hours before operation to achieve optimum bond strength. Bolt on systems are the most common fixing methods used in the mining industry. ECI use high quality studwelding equipment and stud products in accordance with Australian Standards (AS 1554.4:2010). All Enduratile products can be installed by mechanically fastening it to the application using bolted or welded fasteners. This method is not available for products with a thickness less than 25mm. ENDURACLAD INTERNATIONAL PTY LTD Advanced Ceramics and Ultra-High Performance Polymer Linings 9
Enduraclad International Pty Ltd pride themselves on commitment to meeting customer s requirements and on time. All products from Enduraclad International are backed by our 100% quality control systems and sampling methods to ensure customer satisfaction. All orders are sent with material and inspection testing certification. As a certified ISO 9001:2008 company, we endeavor to continue our company values and commitment to quality. Enduraclad International Pty Ltd Head Office: 41 Roscoe Street, Henderson WA 6166 Factory 2: 4 Lodge Drive, Rockingham WA 6168 Office: 08 9437 4506 Fax: 08 6311 7381 ENDURACLAD INTERNATIONAL PTY LTD Advanced Ceramics and Ultra-High Performance Polymer Linings 10
CHROMIUM CARBIDE * CERAMICS * POLYMER COATINGS * STEEL * NI-HARD * DOMITE * FABRICATION * CUTTING SERVICES * INSTALLATIONS * STUD WELDING * SHAPING AND PRESSING * ENDURACLAD INTERNATIONAL PTY LTD Advanced Ceramics and Ultra-High Performance Polymer Linings 11