Micro-Rebar Technology Superior Concrete. Chuck Wilson Helix Steel Distribution Manager North America

Similar documents
1 Exam Prep Placing Reinforcing Bars Tabs and Highlights

Lintel Tables Design Notes and Limitations

Concrete weighs about 150 pounds per cubic foot

Bonner Bridge Replacement Update:

Tips For Designing Constructable Concrete Buildings

03 CONCRETE TAKEOFF SUMMARY REPORT Takeoff and Items Cost Summary. Ryan Manocchio

A Guide for the Interpretation of Structural Design Options for Residential Concrete Structures

Structural System. Design Criteria Fire Resistance Concrete designed for 2 HR rating (worst case) Geotechnical Report Allowable Bearing Capacity

PRECAST CONCRETE PRODUCTS

Structural Tests and Special Inspections Form. Inspection of Fabricators (1704.2)

Elevated Slab Sequence

INSTEEL WIRE PRODUCTS. Product Catalog

POST FRAME BUILDING STANDARDS

REINFORCING TABLES INSTALLATION MANUAL

Project Address: Name of Person Completing Form:

Locrete Building System: the Technology Handbook

Minimum Guidelines for the Design and Use of Underpins When Performing Foundation Stabilization and/or Supplementation UP-08

Concrete-filled fiber reinforced polymer tube-footing interaction in bending

Marina Bay Sands Hotel Arch 631 Kayla Brittany Maria Michelle

SECTION REINFORCING STEEL

The designer shall also submit additional information required by the University as described and underlined below.

DIVISION: METALS SECTION: STEEL DECKING REPORT HOLDER: EPIC METALS CORPORATION 11 TALBOT AVENUE RANKIN, PENNSYLVANIA 15104

INSULATED CONCRETE MASONRY UNITS Section 04220

SECTION MASONRY ACCESSORIES

SECTION SEISMIC RESTRAINT REQUIREMENTS FOR NON-STRUCTURAL COMPONENTS REVISED PART 1 GENERAL 1.1 DESCRIPTION:

SJI Updates Expanded Load Tables for Noncomposite Joists / Joist Girders and Development of New Composite Joist Series

Masonry Wall Bracing. A Simplified Approach To Bracing Masonry Walls Under Construction. Masonry Bracing Task Force.

Technical Assignment 1 10/8/03

Anchor bolts ASTM F1554, Gr. 36 Wide flange beams ASTM A992, Fy = 50 ksi Misc. structural steel ASTM A36, Fy = 36 ksi

CTP STITCH-TIE AGAIN! Quick and easy way to re-anchor existing veneers to back-up structures.

Copyright. magazine. CFS Load Bearing Construction

Lifting Sockets. Flat Lifting Sockets

1. Cast-in-place concrete is specified in Section

One and Two Family Additions

10/10/2007. Is it Dark at Night?

Confined masonry. Definition

Reinforced Concrete Design. A Fundamental Approach - Fifth Edition

Brent Ellmann Structural Option 200 Minuteman Park, Andover, MA Structural Consultant: Dr. Hanagan

See the IRC for additional information. See CPD-DS Information Bulletin 100 for Requirements for 1 & 2 Family Dwelling plan submittals.

Design of Semi gravity Retaining Walls

Sabah Shawkat Cabinet of Structural Engineering 2017

Technical Report 3. Alyssa Stangl Structural Option Advisor Dr. Linda Hanagan L A J O L L A C O M M O N S P H A S E I I O F F I C E T O W E R

STAY-FORM TRANSFORMING MATERIALS. into products that make a better world

SECTION STAY-IN-PLACE INSULATED CONCRETE FORMING SYSTEM

YOUR LITE-DECK SECTIONS

SPECIFICATION FOR REINFORCED SOIL WALL

151 First Side. Technical Assignment 2 November 16 th, William J. Buchko. AE 481w Senior Thesis The Pennsylvania State University

Steel fibres Structural applications

DIVISION: CONCRETE SECTION: CONCRETE ACCESSORIES SECTION: REINFORCING STEEL REPORT HOLDER: PJ S REBAR INC.

ARCH 614 Note Set 12.1 S2014abn

REINFORCED CONCRETE WALL BOUNDARY ELEMENT LONGITUDINAL REINFORCING TERMINATION

The Ultimate Structural Engineering Software Package!

Structural Comparison between Pan Joist Concrete and Steel Frame Systems for UMCP Student Housing Building B

Delivering Reliability. Electrical Vaults. Power & Energy-Underground Structures

one structural behavior, systems and design Course Description Course Description Syllabus & Student Understandings statics mechanics of materials

CANTILEVER RACK SPECIFICATIONS PART 1 GENERAL 1.1 SCOPE 1.2 APPROVED MANUFACTURER 1.3 REGULATORY ORGANIZATIONS AND GROUPS 1.4 QUALITY ASSURANCE

Frequently Asked Questions (FAQ) about Epoxy-Coated Reinforcing Bars

SECTION 1043 FENCE MATERIAL

RETAINING WALL LEVEL BACKFILL

DIVISION: MASONRY SECTION: CONCRETE UNIT MASONRY REPORT HOLDER: 3B CONSTRUCTION SOLUTIONS, INC.

Structural Design of Dam Sluice Gate Walkway Slabs: Retrofit and Replacement Options

JULY 2014 LRFD BRIDGE DESIGN 5-1

ENGINEERED POWER SOLUTIONS

CHAPTER 9 STAIR CASES 9.1 GENERAL FEATURES 9.2 TYPES OF STAIR CASES

JULY 2016 LRFD BRIDGE DESIGN 11-1

North Mountain IMS Medical Office Building

5.4 Analysis for Torsion

Section 906. STRUCTURAL STEEL

HILTI HY 150 REBAR DESIGN GUIDE

Technical Note. Specific frequently asked questions (FAQ) and responses are provided below.

One-Way Wide Module Joist Concrete Floor Design

USE OF 500 GRADE STEEL IN THE DESIGN OF REINFORCED CONCRETE SLAB. Prof. M. Shafiul Bari, Ph.D Department of Civil Engg., BUET

Building Design Data

FACT SHEET #2 DECK INFORMATION

Designing for the Future with Composites

REPORT HOLDER: MITEK USA, INC. (FORMERLY USP STRUCTURAL CONNECTORS) SOUTHCROSS DRIVE, SUITE 200 BURNSVILLE, MINNESOTA EVALUATION SUBJECT:

WALL MOUNTED ARTICULATING JIB CRANE

MERCHANTS METALS. A. ASTM F552 Standard Terminology Relating to Chain Link Fencing

Technical Note. Chicago. Figure 2 shows epoxy-coated reinforcing. bars on a bridge deck on I-294 near

SECTION CHAIN LINK FENCES AND GATES (GALVANIZED) A. Fence framework, fabric, gates, and accessories.

Trusted ICC ES. Conformity! Look. Evaluation. ICC-ES Evaluation

Quantity Take-off. 17ft. 63ft If the dimension are the centerline the calculation are easy. The Length of Trench equals = = 207 ft

Special Reinforced Concrete Structural Walls

September 1, 2003 CONCRETE MANUAL SPECIAL TYPES OF CONCRETE

CHAPTER 3 BUILDINGS WITH WOOD FRAMED EXTERIOR WALLS 301 SCOPE

DIVISION: CONCRETE SECTION: REINFORCING STEEL REPORT HOLDER: BARSPLICE PRODUCTS INC WEBSTER STREET DAYTON, OHIO

HILLSBOROUGH TOWNSHIP CODE ENFORCEMENT

RESIDENTIAL DETACHED STORAGE STRUCTURES (GARAGE)

SLAB ON GRADE Insul-Joint or Expansion Joint Material as Required by A/E Specifications AquaCheck Liquid Coating 400 (Waterproofing Membrane) with Aqu

Table of Contents.2. Introduction...3 Gravity Loading and Deflections..4. Existing Structural System..8

MID-RISE DESIGN & CONSTRUCTION

DIVISION: CONCRETE SECTION: REINFORCING STEEL REPORT HOLDER: DEXTRA MANUFACTURING CO., LTD.

Technical Data for. Headers. and Beams

DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL ROOF PANELS SECTION: METAL WALL PANELS REPORT HOLDER:

SECTION SOUND ISOLATION

GUIDE SPECIFICATIONS For STRUCTURAL PRECAST HOLLOW CORE SLABS SECTION 03410

R CODE CHANGE PROPOSAL FORM (See instructions on page 2)

16. Design of Pipeline Structures.

The Structural Redesign of Boyds Bear Country and its Related Systems. Boyds Bear Country, Pigeon Forge, Tennessee

EMERGENCY MANAGEMENT PREPAREDNESS AND ASSISTANCE TRUST FUND ARC 4496 Evaluation Questionnaire

Transcription:

Micro-Rebar Technology Superior Concrete Chuck Wilson Helix Steel Distribution Manager North America 425-239-8760

Helix is Only Steel Fiber Approved as Primary Steel in Structural Concrete ISO/IEC Guide 65 Evaluation Report UER279 Issued and in use. Assurance of Structural Capacity UL Assurance of Fire Resistance Public Reviewed Design Method ISO/IEC 17025 (IAS) Laboratory Recognized in 99 countries Micro-Rebar

Product Description Steel wire tensile strength: 270 ksi (1800 MPa) Electroplated zinc coating: 3 g/m 3 Length: 1.0 inch (25 mm), Equivalent diameter: 0.020 inch (0.5 mm) Rectangular Cross Sectional Shape Each Helix Micro-Rebar has a minimum of one 360-degree twist. 11,000 parts per pound Micro-Rebar

Helix Developed for the Military for Blast Resistant Concrete 1990 ies 10 lbs. of C4 explosive at 10 inches from the 6 inch thick test panel - Rebar Only With 50 lbs/cy of Helix & 50% Less Rebar - Only Helix Can do This!

12 Years and 30 Countries: Slabs Walls Footings - Complex Structures audi lo go Micro-Rebar

Helix Reinforces Concrete Before the First Crack First Crack in Concrete with Rebar, Plastic or Metal Fibers Helix Reinforces Concrete Before it Cracks. First Crack Point with Helix Concrete Plastic Fibers Do Nothing Micro-Rebar

ICF Construction Example Project: ICF Wall rebar both horizontal and vertical rebar. Helix Design: rebar both horizontal and vertical replaced by Helix. Lintel horizontal remains, and one vert on each side of windows and doors. Dowel between cold joints. Micro-Rebar

Uniontown Hilton PA Hilton Garden Inn Recently completed hotel. Helix used to replace the majority of the field rebar in the ICF walls. Vertical bar remained around window/door openings and in lintel.

High rise 20 story Project 10 walls 10pcy Helix plus one layer of 15M@24 ocew replaced 2 layers of 15M bar @ 24 ocew

Seattle Pier 57 Piles Project: Seattle Pier 57 Pile Foundation, March 2012 Helix Design: 53 steel piles received 24,000 pounds of Helix micro rebar to replace all #6 rebar cages saving money, reducing schedule and increasing strength. Micro-Rebar

Corrosion: Seattle Pier 57 Piles Salt Water Exposure Project: Seattle Pier 57 Grade Beam 18 lbs/cy. Picture shows 3.5 years of salt water spray exposure. No rust or cracks. Micro-Rebar

WhiteCore SCI Panel Technology Thin skinned concrete tilt panels were the second step in development.

WhiteCore SCI Panel Technology 800 foot x 200 foot x 24 to 38 foot tall Liteform/Helix Tilt Hog Barn R24 Walls. 100 foot spanning roof trusses. Panels weigh about 22 K pounds. Set the whole building with a 35 ton all terrain crane. Crane cost is normally 50% of the construction installation cost for a tilt project.

WhiteCore SCI Panel Technology Technology development has evolved into construction of large tilt up buildings. Rebar bundles in the vertical beam column without shear ties and 20 lbs/cy of Helix in the panel, both sides.

WhiteCore SCI Panel Technology Horizontal End Picks and Carrying them in a horizontal position around the job site Not the normal way to move tilt panels Only with WhiteCore SCI Panel Technology. 50 foot panels for an outdoor theater movie screen public park. Panels were stack cast and lifted horizontally with four end pick points and two in the center half way down. Unsupported cantilevered section NO CRACKS

Sunnybrook Church Parking Lot Sioux City NE Client had such good experience with the 1st - 110,000 feet of parking lot replacement that they are now replacing other areas that have failed. Now using Helix in concrete for all of their paving projects. 9 lbs per yard is their dosage rate on the entire project and patches. No frost heave issues over poor base materials

Helix 5-25 Shotcrete Optimized for current Civil Tunnel Specifications Provides Superior performance at low deflections in RDP and ASTM C1609. Plastic fibers do not perform until deflections are high Micro-Rebar

Placing and Finish Placing Per Standard Practice ACI 305R ACI 302. 1R -60 9.6 and 11.2.2.1. ACI 207 (Mass Concrete) Finishing per Standard Practice ACI 302.1R Note ACI 544-3R recommendations Adequate Paste Development Helix 3-Part CSI Specification Micro-Rebar

Twisted Micro-Rebar Technology Is the Only Micro Rebar Approved as Structural Reinforcement in Structural Concrete.