MODEL P710 SERIES MACHINES AUTOMATIC STRAPPING MACHINES Reliable packaging solutions for all industries. Auto strap load for operator convenience and safety Loop eject avoids strap jamming in the machine Heavy-duty casters for ease of mobility Auto feed retry corrects misfeeds and reduces downtime Electronic tension control for complete range of application Movable control module for ergonomic operation External coil mount for easy coil changeover Roller top work surface for easy package handling End of Strap eject for operator safety 110 volt, single phase, 60 Hz power for use in any facility
MODEL P710N NARROW HEAD STRAPPING MACHINE This variation on a standard machine has been designed with a special narrow sealing head. This allows for strapping of packages that are too small for a standard machine to pull a tight strap. Common applications for this machine are tubing, wire or other small packages that provide as little as 2 of flat surface. The standard seal head is 3 1 /2 wide. The narrow seal head is 1 1 /8 wide. This machine will also accommodate some non-compressible products (subject to sample test). Track size is 12 high by 16 wide. This machine will handle strap sizes of 3 /8 and 1 /2 with core sizes of 8 x 8 and 9 x 8.
MODEL P710Y SIDE SEAL STRAPPING MACHINE P710 Y, adapts easily to conveyorized automated packaging systems. It is easy to slide the unit out of the conveyor system when service is required. The side seal is ideal for heavy products as the weight of the product is on the conveyor and not on the strapping machine. In applications where dirt and dust are factors, the side mounted head is ideal. This machine can be integrated into fully automated lines and conveyor interlocks are a standard feature. Floor to seal centerline is 19. Available with track sizes combining in heights of 24, 32, 39, 47, 55, or 61 and a width of 20, 28, 35, 43, 51, or 59. Strap sizes of 6mm, 7mm, 9mm, 12mm, 1 /4 3 /8 and 1 /2. Core sizes of 8 x 8 and 9 x 8. Floor to top of lower track is 10.
MODEL P710A CONVEYORIZED AUTOMATIC STRAPPING MACHINE This versatile plastic strapping machine uses the same reliable platform as our popular P710 model, but adds dual conveyor belts for automated applications. With a built in inverter, the 710A offers variable tension control with a range from 4.5 to 154 lbs. This allows high tension for heavy packages or low tension to avoid product damage on soft materials. Function Selectability Single strap, double strap or conveyor mode can be selected through a three position switch to accommodate various product requirements Easy Access Seal Unit Hinged conveyor tabletops and removable service panels for easy maintenance Available with track sizes combining in heights of 20, or 28 and a width of 24, or 32. Strap sizes of 6mm, 7mm, 9mm, 12mm, 1 /4 3 /8 and 1 /2. Core sizes of 8 x 8 and 9 x 8. 1.75 Second Cycle Time High speed strapping with standard arch size Adjustable conveyor speed
MODEL P710LB LOW BOY STRAPPING MACHINE This variation on a standard machine has been designed as a low boy for applications where integration into a low conveyor line is required. This machine has a 17 conveyor top height and, as shown with a large arch, can accommodate tall packages and low conveyor lines simultaneously. Ideal for large packaged goods such as appliances, cabinets and furniture. This machine maintains portability and flexibility while allowing line operators to function at comfortable heights. The table height can be ordered to suit existing conveyors above the 17 standard. (Note - 17 with casters) Available with track sizes combining in heights of 28, 35, 43, 51 or 59 and a width of 32, 39, 47, 56 or 62. Strap sizes of 6mm, 7mm, 9mm, 12mm, 1/4 3 /8 and 1 /2. Core sizes of 8 x 8 and 9 x 8.
MODEL P710SC STAINLESS STEEL STRAPPING MACHINE The SC model has a stainless track cover and cabinet which has been designed to withstand high moisture environments. This machine is commonly used in the poultry, meat, fish and produce sector. The bottom seal on this model is ideal in environments with high moisture and also provides more ergonomic advantages in package placement, as the item can be easily positioned above the sealing head. Standard cabinet environment controls maintain ambient conditions of electrical and mechanical components. A lower stainless pan is installed to reduce moisture contamination in critical components. Available in fully automatic version - P710SCA Available with track sizes combining in heights of 20, or 28 and a width of 24 or 32. Strap sizes of 6mm, 7mm, 9mm, 12mm, 1/4 3 /8 and 1 /2. Core sizes of 8 x 8 and 9 x 8.
MODEL P710 SERIES MACHINES AUTOMATIC STRAPPING MACHINES Standard The P710 series machine offers all of the advantages of a high end automatic strapping machine designed for high output manufacturing facilities. Designed for long term reliability and all production rates, they have been proven throughout the world. High quality parts and components ensure that the machine will provide high productivity and low maintenance costs. Available in a wide variety of configurations, the machine can be ordered as a bottom seal, side seal or narrow head unit to suit your production setup and package type. Stainless steel models are available for high moisture environments, and low boy configurations are ideal for conveyors as low as 17. Automatic feed NEW Operator simply inserts the end of the strap into the wheel to load the machine then feeds the accumulator and track automatically. Auto Refeed If the strap doesn t go around the track and into the sealing head, the machine will pull the strap out and attempt to refeed it. Loop Eject Feature If the machine cycles accidentally without a package in the track, the strap is pulled tight around the sealing mechanism and then ejected, preventing time consuming strap jam. Foot pedal switch In addition to a table switch and palm switch, all P710 machines feature a standard foot switch. This allows the operator to strap the package, while leaving hands free for other tasks. Ele ctronic primar y tension sensor The P710 series features an electronic rather than mechanical primary tension sensor. This reduces strap dusting. Secondary Tension Standard short range for conventional operation. Standard long range for additional time on compressible products. Serpentine Track 4 segments make up the P710 track allowing forgiveness in strap configuration while offering a significant reduction in wear of parts. Trouble Alarm A highly audible signal can be easily heard in the event of misfeeds or other problems, allowing the operator to abort the cycle and troubleshoot. End of Strap Eject The P710 detects the end of a strap coil and ejects a small piece that is in the accumulator to warn operator that the roll is low. The operator doesn t have to stick his hand in the machine to retrieve the end of the strap. Frequency Inverter Controls the secondary tension cycle of the machine allowing for simple high speed performance without the need for reducers, sprockets, chains or belts.
MODEL P710 SERIES MACHINES AUTOMATIC STRAPPING MACHINES Available Options Specifications Three phase electrical (step down transformer) Solid table tops (no rollers) Conveyor interlocks (standard on side seal) Raised work height Lower work height Adjustable work height Single shot bull switch Feed roller dust cover Arch Size: Capacity: Strap Width: Tension: Power Supply: Net Weight : Wide range available up to 40 cycles/min 1/4, 3/8, 1/2 (5, 6, 7, 10, 13mm) 5.5-155 lbs by dial (2.5-70kg by dial) Single Phase 110V 60 Hz 363 lbs (165kg) (depending on track size) The P710 series track record dates to 1999 in a wide variety of industries and applications. Your sales representative will be available to survey your needs and provide any further specifications required for the right machine to suit your applications. Model P710N Model P710Y Model P710A Model P710LB Model P710SC Represented By: P710-02/11-94950