FORGED CARBON STEEL FITTINGS & FORGED STEEL UNIONS Screwed and Socket Welding Price Sheet CSF-7.17 Effective: July 3, 2017 Cancels Price Sheet CSF-4.11 of April 18, 2011 FOR THE MOST CURRENT PRODUCT/PRICING INFORMATION ON ANVIL PRODUCTS, PLEASE VISIT OUR WEBSITE AT WWW.ANVILINTL.COM FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. Prices apply only to Standard Sizes as listed in catalogs. On orders received for cartoned items in less than carton (not container) quantities, we reserve the right to adjust to the next carton Qty above the number of pieces shown on the order. NOTICE: To the prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. GENERAL UPC numbers are available upon request. To obtain current ISO certifications, listings, and other approvals, visit Anvil s website at. Pricing is subject to change without notice. Go to Anvil s website for the most current list price information, or contact your local Anvil representative. LOSS OR DAMAGE CLAIMS: All goods are shipped at buyer s risk. Shipments should be carefully examined upon delivery and before the carrier s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. NORTHERN REGION CUSTOMER SERVICE CENTER 80 0-301-2701 SOUTHERN REGION CUSTOMER SERVICE CENTER 800-451-4414
FORGED STEEL FITTINGS Price List 1. CONTROLLING PROVISIONS: These terms and conditions shall control with respect to any purchase order or sale of Seller s products. No waiver, alteration or modification of these terms and conditions whether on Buyer s purchase order or otherwise shall be valid unless the waiver, alteration or modification is specifically accepted in writing and signed by an authorized representative of Seller. 2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on Seller s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no backcharge, for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatever beyond the control of Seller. Seller may terminate any contract of sale of its products without liability of any nature, by written notice to Buyer, in the event that the delay in delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay. 3. WARRANTY: Seller warrants for one year from the date of shipment Seller s manufactured products to the extent that Seller will replace those having defects in material or workmanship when used for the purpose and in the manner which Seller recommends. If Seller examination shall disclose to its satisfaction that the products are defective, and an adjustment is required, the amount of such adjustment shall not exceed the net sales price of the defective products only and no allowance will be made for labor or expense of repairing or replacing defective products or workmanship of damage resulting from the same. Seller warrants the products which it sells of other manufacturers to the extent of the warranties of their respective makers. Where engineering design or fabrication work is supplied. Buyer s acceptance of Seller s design or of delivery of work shall relieve Seller of all further obligation, other than expressed in Seller s product warranty. THIS IS SELLER S SOLE WARRANTY. SELLER MAKES NO OTHER WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FOR A PARTICULAR PURPOSE WHICH EXCEED SELLER S AFORESTATED OBLIGATION ARE HEREBY DISCLAIMED BY SELLER AND EXCLUDED FROM THIS WARRANTY. Seller neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of its engineering designs or products. This warranty shall not apply to any products or parts of products which (a) have been repaired or altered outside of Seller s factory, in any manner: (b) have been subjected to misuse, negligence or accidents; (c) have been used in a manner contrary to Seller s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representatives. 4. SELLER S LIABILITY: Seller will not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether based upon warranty (except for the obligation accepted by Seller under Warranty above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer. 5. RETURNS: Seller cannot accept return of any products unless its written permission has been first obtained, in which case same will be credited subject to the following (a) All material returned must, on its arrival at Seller s Plant, be found to be in first-class condition; if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty percent (20%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid will be deducted from credit memoranda. 6. SHIPMENTS: All products sent out will be carefully examined, counted and packed. The cost of any special packing or special handling caused by Buyer s requirements or requests shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment. Claims for products damaged or lost in transit should be made on the carrier, as Seller s responsibility ceases, and title passes, on delivery to the carrier. 7. SPECIAL PRODUCTS: Orders covering special or nonstandard products are not subject to cancellation except on such terms as Seller may specify on application. 8. PRICES AND DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. Point of shipment, unless otherwise stated. 9. TAXES: The amount of any sales, excise or other taxes, if any, applicable to the products covered by this order, shall be paid by Buyer unless Buyer provides Seller with an exemption certificate acceptance to the taxing authorities. 10. NUCLEAR PLANTS: Where the products, engineering design or fabrication is for nuclear plant applications. Buyer agrees (a) to take all necessary steps to add Seller as an insured under the American Nuclear Insurers (ANI) pool and under the Mutual Atomic Energy Reinsurance Pool (MAERP) for property damage and liability insurance and if necessary steps could have been taken, but are not taken, Buyer shall hold Seller harmless against all such losses which could have been thus covered (b) Buyer agrees to hold Seller harmless with respect to any personal injury (or death), property damage or other loss in a nuclear incident which is caused directly or indirectly by defective design, material, workmanship furnished by Seller (or which could be so covered but with respect to which Buyer has elected to selfinsure), and further agrees to waive subrogation by its carriers of such insurance against Seller, and (c) as to nuclear hazards for which Buyer cannot obtain insurance coverage, the liability of Seller for any personal injury (or death), property damage or other loss directly caused by defective design, material, or workmanship furnished by Seller shall not exceed the value at the time of the loss occurrence. 11. MINIMUM INVOICE: Domestic: $100 plus transportation. International: $500 plus transportation. 12. TERMS: Cash, net 30 days unless otherwise specified. NOTE: All orders are accepted on the basis of prices in effect at the time of shipment. NOTICE: The prices and terms quoted, there will be added any manufacturers or sales tax payable on the transaction under any effective statute. FREIGHT ALLOWANCE: All prices are F.O.B. point of shipment. On shipments weighing 2,500 pounds or more, rail freight or motor freight at the lowest published rate, is allowed to all continental U.S. rail points or all U.S. highway points listed in published tariffs (Alaska and Hawaii excluded). In no case will more than actual freight be allowed. Shipments (weighing less than 2,500 pounds) will be shipped prepaid. The buyer will be invoiced for freight costs at the applicable published class, exception or commodity rate(s) or charge(s). Anvil reserves the right to select the carrier for all shipments. Revised: 2
CLASS 2000 THREADED FITTINGS FORGED STEEL FITTINGS Price List NOMINAL PIPE SIZE 1/8" ¼" 3/8" ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" LIST - $19.81 $22.92 $20.08 $21.89 $28.20 $56.40 $68.81 $94.36 $248.35 $383.49 $1,257.38 90 Elbows WGT. EACH - 0.38 0.32 0.55 0.69 1.03 1.73 2.46 4.02 7.79 11.48 20.73 CTN. QTY. - 25 25 25 25 25 10 5 5 4 2 - LIST - $29.61 $30.69 $29.18 $32.68 $38.25 $60.51 $76.15 $118.75 $317.52 $512.70 $1,289.45 45 Elbows WGT. EACH - 0.30 0.25 0.47 0.59 0.90 1.54 1.83 2.65 5.19 7.58 17.47 CTN. QTY. - 25 25 25 25 25 10 5 5 4 2 - LIST - $25.33 $28.28 $24.32 $32.95 $45.77 $80.98 $98.01 $122.53 $310.67 $535.47 $1,327.94 Tees WGT. EACH - 0.52 0.42 0.69 0.91 1.41 2.27 3.03 4.48 8.75 13.35 25.19 CTN. QTY. - 25 25 25 25 25 10 5 5 3 2 - LIST -- $74.40 $77.17 $76.30 $84.87 $99.65 $182.08 $223.37 $305.80 $1,286.71 $1,286.71 $2,034.09 Crosses WGT. EACH - 0.65 0.54 0.89 1.24 1.73 2.72 3.75 5.24 16.50 27.41 38.60 CTN. QTY. - 25 25 25 10 10 10 5 5 - - - Forged Steel Fittings Extras Below Sold in box only. FORGED STEEL FITTINGS EXTRAS Electrogalvanized Fittings... Plus 25% Normalized Fittings......................................................................................... POA Threaded by Socket Weld Fittings.... Plus 100% True Reducing Fittings, Threaded and Socket Weld.... Plus 100% Reducing, Hex Head Bushings and Socket Weld Reducer Inserts Beyond First Four Size Reductions... POA Class 3000 Socket Weld Fittings For Schedule 80 Bore... Plus 100% Class 9000 Socket Weld Fittings (For XXH Bore).... POA CLASS 3000 THREADED FITTINGS NOMINAL PIPE SIZE 1/8" ¼" 3/8" ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" LIST $28.35 $28.35 $28.35 $21.73 $27.26 $40.52 $76.98 $99.32 $120.62 $357.06 $514.39 $1,299.20 90 Elbows WGT. EACH 0.42 0.32 0.69 0.82 1.35 2.44 3.28 5.75 6.23 10.85 16.77 34.18 CTN. QTY. 25 25 25 25 10 10 5 5 5 - - - LIST $35.99 $35.99 $35.99 $35.49 $40.99 $55.83 $77.17 $110.78 $152.86 $357.16 $580.66 $1,062.16 45 Elbows WGT. EACH 0.34 0.30 0.56 0.75 1.23 2.11 2.35 4.14 4.34 7.77 12.08 24.75 CTN. QTY. 25 25 25 25 10 10 10 5 5 - - 2 LIST $34.43 $34.43 $34.43 $31.01 $41.88 $55.15 $107.04 $124.89 $161.50 $437.65 $816.13 $1,359.80 Tees WGT. EACH 0.55 0.52 0.89 1.20 2.01 3.15 4.02 7.05 7.26 13.92 21.04 39.82 CTN. QTY. 25 25 25 25 10 10 5 5 5-1 - LIST $135.78 $135.78 $135.78 $87.64 $115.64 $162.72 $215.59 $287.25 $387.23 $983.85 $1,302.72 $1,851.87 Crosses WGT. EACH 0.36 0.65 1.07 1.64 2.36 3.86 4.81 8.33 8.27 22.45 19.75 44.12 CTN. QTY. 25 25 25 25 10 5 5 5 2 - - - LIST $77.12 $42.43 $40.90 $40.90 $51.68 $68.96 $124.91 $150.99 $217.78 - - - 90 Street WGT. EACH 0.26 0.24 0.40 0.53 0.88 1.82 2.47 3.85 5.78 - - - Elbows CTN. QTY. 25 25 25 25 25 10 5 5 5 - - - LIST - - - $339.25 $358.19 $440.32 $489.71 $585.84 $727.53 - - - Laterals WGT. EACH - - - 1.75 2.73 4.43 5.50 10.81 11.70 - - - CTN. QTY. - - - - 25 12-1- 4 - - - LIST $11.04 $11.04 $11.04 $9.08 $11.81 $20.56 $34.27 $44.32 $55.31 $136.87 $258.71 $485.29 WGT. EACH 0.12 0.10 0.13 0.28 0.42 0.84 1.56 2.16 3.02 4.75 6.71 12.72 CTN. QTY. 50 50 50 50 50 25 10 12 10 5 4 2 LIST $5.74 $5.74 $5.95 $5.53 $7.93 $10.88 $19.68 $26.18 $35.19 $72.15 $162.31 $283.58 Half WGT. EACH 0.05 0.04 0.06 0.12 0.21 0.43 0.76 1.14 1.50 2.40 3.25 6.25 CTN. QTY. 25 25 25 25 25 25 25 25 25 10 12 8 LIST - $17.33 $18.06 $18.06 $21.44 $27.92 $48.90 $53.10 $77.01 $306.47 $405.31 $620.54 Reducing WGT. EACH - 0.10 0.15 0.35 0.52 1.10 2.08 2.93 4.40 7.50 11.00 20.50 CTN. QTY. - 25 25 50 25 25 - - - - - - LIST $10.75 $10.65 $10.65 $10.36 $14.44 $22.15 $35.66 $42.63 $61.36 $168.96 $311.28 $392.77 Pipe Caps WGT. EACH 0.07 0.08 0.11 0.23 0.40 0.79 1.35 1.64 2.40 4.45 7.14 12.42 CTN. QTY. 100 100 50 25 25 25 25 25 25 12 8 4 Reducing (Limit to 4 Reductions) Sold in box only. Revised: 3
CLASS 6000 THREADED FITTINGS NOMINAL PIPE SIZE 90 Elbows 45 Elbows Tees Crosses 90 Street Elbows Laterals Half Reducing Pipe Caps CLASS 3000 SOCKET WELD FITTINGS (For Schedule 40 Bore*) FORGED STEEL FITTINGS Price List 1/8" ¼" 3/8" ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" LIST POA $89.53 $89.53 $43.14 $54.95 $70.46 $152.63 $184.57 $310.99 $524.45 $1,304.88 POA WGT. EACH 0.42 0.74 1.23 1.92 2.85 4.06 6.77 7.92 14.03 21.82 38.30 34.56 CTN. QTY. - 25 25 25 15 5 5 5 2 - - - LIST - - - $60.10 $77.97 $94.08 $233.45 $233.45 $314.07 $1,191.45 $1,252.10 - WGT. EACH - - - 1.48 2.33 2.92 4.76 6.04 9.69 15.00 30.56 - CTN. QTY. - - - 25 25 5 5 4 2 - - - LIST - $89.53 $89.53 $59.18 $80.05 $138.28 $168.28 $239.15 $432.39 $1,434.19 $1,440.60 POA WGT. EACH - 0.97 1.47 2.16 3.81 5.26 7.91 10.03 18.29 28.06 42.96 65.63 CTN. QTY. - 20 20 20 10 5 5 3 2 - - - LIST - POA - $190.59 $391.09 $563.11 $769.88 $926.19 $975.59 $1,812.37 $1,924.44 - WGT. EACH - 1.20-2.76 4.59 5.88 9.75 11.40 29.23 28.30 44.12 - CTN. QTY. - 25-15 5 5 5 4 - - - - LIST - POA - $83.47 $131.05 $214.82 $404.35 $519.89 $975.59 $1,812.37 $1,924.44 - WGT. EACH - 0.01-1.18 2.09 3.12 3.80 7.20 - - - - CTN. QTY. - 17-25 25 20 - - - - - - LIST - - - $539.32 $655.58 $703.54 $1,084.33 $1,133.13 - - - - WGT. EACH - - - 3.25 6.44 7.19 12.32 13.30 - - - - CTN. QTY. - - - - - - - - - - - - LIST $27.27 $27.27 $27.27 $23.20 $26.57 $35.66 $66.84 $73.66 $109.36 $502.93 $733.45 $1,390.41 WGT. EACH 0.17 0.30 0.45 0.70 1.15 1.83 2.08 3.95 6.50 9.25 13.44 22.13 CTN. QTY. - 20 50 25 20 25 10 8 9 6 4 2 LIST POA $20.97 $22.78 $16.93 $17.96 $22.37 $50.25 $62.66 $114.14 - - - WGT. EACH 0.08 0.13 0.22 0.35 0.46 0.95 1.10 2.12 3.00 - - - CTN. QTY. - 50 50 50 15 25 25 25 10 - - - LIST - - - $179.25 $179.25 $252.86 $382.67 $350.22 $491.34 - - - WGT. EACH - - - 0.78 1.16 2.03 2.73 4.70 7.50 - - - CTN. QTY. - - - - - - - - - - - - LIST POA POA POA $32.41 $38.90 $41.40 $105.31 $107.26 $127.53 $920.07 $995.57 POA WGT. EACH - - - 0.41 0.57 1.17 1.42 2.17 3.66 4.94 7.66 14.53 CTN. QTY. - - - 20 20 25 5 25 5 - - - NOMINAL PIPE SIZE 1/8" ¼" 3/8" ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" LIST $38.52 $38.52 $38.52 $21.48 $22.36 $28.71 $55.19 $64.12 $94.31 $268.10 $463.05 $1,222.82 90 Elbows WGT. EACH 0.21 0.35 0.29 0.55 0.66 0.93 1.59 2.37 3.74 7.04 11.64 21.19 CTN. QTY. 25 25 25 25 25 25 10 5 5 - - - LIST $38.72 $38.72 $38.72 $28.63 $33.26 $43.52 $59.68 $73.14 $117.62 $308.83 $513.24 $1,011.45 45 Elbows WGT. EACH 0.28 0.31 0.23 0.42 0.55 0.86 1.38 1.67 2.49 5.15 7.27 22.22 CTN. QTY. 25 25 25 25 25 25 10 5 5 - - 2 LIST $42.56 $42.56 $42.56 $26.62 $32.55 $44.21 $67.94 $90.02 $129.97 $373.29 $892.55 $1,436.26 Tees WGT. EACH 0.54 0.36 0.36 0.68 0.84 1.32 2.05 3.03 4.26 7.87 13.12 24.87 CTN. QTY. 20 20 20 25 25 25 10 5 5-2 - LIST $0.00 $0.00 $0.00 $96.62 $99.81 $108.14 $146.72 $211.27 $304.39 $710.60 $943.73 - Crosses WGT. EACH 0.45 0.38 0.32 0.81 1.21 1.57 2.58 3.57 4.84 13.10 20.00 - CTN. QTY. 25 25 25 25 25 10 5 5 5 - - - LIST - - - $442.99 $479.85 $568.67 $629.66 $660.11 $721.16 - - - Laterals WGT. EACH - - - 1.00 1.75 2.38 3.75 4.22 6.89 - - - CTN. QTY. - - - - - - - 10 6 - - - LIST $29.38 $24.48 $24.48 $11.30 $14.62 $16.13 $28.60 $31.63 $50.51 $112.96 $253.90 $381.81 WGT. EACH 0.08 0.10 0.16 0.21 0.40 0.55 0.75 1.10 1.65 3.25 5.10 7.50 CTN. QTY. 25 50 25 50 25 25 25 25 25 20 10 4 LIST POA POA POA $12.79 $13.05 $17.44 $35.23 $35.12 $50.89 $465.49 $495.95 $623.57 Half WGT. EACH 0.09 0.12 0.23 0.28 0.43 0.66 1.10 1.06 2.15 3.70 6.00 8.00 CTN. QTY. 50 50 25 25 30 20 10 10 10 - - - LIST - $62.51 $65.89 $40.14 $40.16 $56.08 $71.63 $76.78 $84.89 $272.44 $491.25 $521.99 Reducing WGT. EACH - 0.13 0.26 0.35 0.58 1.10 1.46 1.98 3.50 5.50 6.50 10.00 CTN. QTY. - - - - - - - - - - - - LIST $23.42 $23.42 $23.42 $14.23 $16.59 $25.17 $29.66 $41.20 $63.55 $345.58 $357.14 $531.83 Pipe Caps WGT. EACH 0.07 0.09 0.17 0.30 0.37 0.60 0.96 1.27 1.99 3.38 6.30 12.08 CTN. QTY. 100 100 50 20 25 25 25 25 25 20 8 6 * Schedule 80 Bore Refer to Page 3. Sold in box only. Revised: 4
FORGED STEEL FITTINGS Price List CLASS 6000 SOCKET WELD FITTINGS (For Schedule 160 Bore) NOMINAL PIPE SIZE ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 90 Elbows 45 Elbows Tees Crosses Laterals Half Reducing Pipe Caps LIST $36.95 $41.11 $56.50 $93.50 $125.50 $184.06 $383.70 $670.81 $1,668.03 WGT. EACH 0.86 1.44 2.65 3.42 6.23 6.73 11.76 18.38 36.40 CTN. QTY. 20 25 5 5 5 2 - - - LIST $45.18 $54.18 $69.15 $138.45 $168.55 $199.08 $944.49 $992.59 $1,151.17 WGT. EACH 0.72 1.25 2.15 2.37 4.25 4.94 8.90 12.08 27.00 CTN. QTY. 25 15 5 5 5 2 - - - LIST $55.77 $64.31 $80.41 $176.54 $207.65 $263.08 $501.37 $971.20 $1,589.31 WGT. EACH 1.17 1.92 3.31 4.27 7.47 7.94 16.63 23.32 45.32 CTN. QTY. 20 10 5 5 3 2 - - - LIST $391.73 $555.51 $593.88 $825.04 $816.82 $1,151.29 - - - WGT. EACH 1.40 2.18 3.80 4.70 8.70 9.30 - - - CTN. QTY. 15 5 5 5 3 - - - - LIST $737.35 $738.14 $777.00 $814.22 $1,308.22 $1,630.97 - - - WGT. EACH 2.50 3.25 5.38 6.75 12.81 - - - - CTN. QTY. - - - - - - - - - LIST $21.99 $24.29 $30.64 $80.36 $80.36 $115.16 POA POA POA WGT. EACH 0.53 0.56 0.92 1.16 2.57 4.75 6.14 7.10 13.70 CTN. QTY. 25 25 10 10 5 6 12 6 3 LIST $34.88 $38.71 $47.85 $342.18 $456.89 $514.78 POA POA POA WGT. EACH 0.56 0.95 1.12 1.87 2.87 3.62 4.63 6.72 11.07 CTN. QTY. 25 25 25 25 10 5 6 6 2 LIST - $180.51 $191.68 $217.05 $309.66 $375.88 - - - WGT. EACH - 0.81 1.80 2.00 3.20 5.40 - - - CTN. QTY. - - - - - - - - - LIST $29.44 $42.85 $45.50 $105.69 $138.08 $204.81 POA POA POA WGT. EACH 0.42 0.58 1.21 1.00 2.12 4.87 4.90 6.25 10.00 CTN. QTY. 25 15 10 15 5 5 6 6 3 PLUGS AND BUSHINGS NOMINAL PIPE SIZE 1/8" ¼" 3/8" ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" LIST $4.81 $4.81 $5.04 $5.28 $6.58 $10.08 $20.78 $23.73 $37.48 $96.42 $161.38 $254.95 Square WGT. EACH 0.02 0.03 0.06 0.10 0.18 0.38 0.62 0.88 1.40 2.33 3.57 8.50 Head Plugs CTN. QTY. 25 25 25 25 25 25 25 25 25 20 12 - Hex Head Plugs Round Head Plugs Hex Head Bushings Flush Bushings LIST $4.03 $4.03 $4.19 $4.19 $7.78 $10.96 $18.62 $26.49 $41.11 $92.69 $169.33 $278.67 WGT. EACH 0.03 0.05 0.08 0.16 0.25 0.41 0.90 1.25 2.18 3.84 7.08 12.07 CTN. QTY. 100 100 100 100 50 25 20 10 10 15 6 4 LIST $9.54 $9.05 $9.05 $6.96 $8.21 $12.03 $27.76 $29.84 $44.40 - - - WGT. EACH 0.05 0.10 0.16 0.28 0.42 0.82 1.20 1.50 3.20 - - - CTN. QTY. 100 100 50 50 25 15 15 15 8 - - - LIST - $6.64 $6.64 $6.68 $8.21 $13.37 $21.79 $25.12 $37.71 $118.24 $182.89 $396.28 WGT. EACH - 0.02 0.03 0.10 0.19 0.39 0.72 1.02 0.85 1.20 6.80 7.00 CTN. QTY. - 100 100 100 50 50 25 20 25-6 - LIST - POA POA POA POA POA POA POA POA - - - WGT. EACH - 0.03 0.03 0.06 0.09 0.12 0.15 0.20 0.35 - - - CTN. QTY. - - - - - - - - - - - - Sold in box only. Revised: 5
Design Basis MSS-SP-79 Material Specification - ASTM A-105, ASME SA-105 SOCKET WELDING REDUCER INSERTS SIZE (INCHES) Class 3000 (For Schedule 40 Bore) Class 6000 (For Schedule 160 Bore) ½ x 3/8" FORGED STEEL FITTINGS Price List ¾ x ½" 1 x ¾" 1¼ x 1" 1½ x 1¼" 2 x 1½" 2½ x 2" 3x 2½" LIST $21.79 $26.60 $29.12 $34.17 $42.70 $58.45 $405.71 $506.25 WGT. EACH 0.18 0.25 0.35 0.56 0.62 1.50 3.00 4.40 CTN. QTY. - - - - - - - - LIST - $99.87 $103.52 $264.08 $222.16 $290.51 - - WGT. EACH - 0.41 1.10 1.60 2.90 - - - CTN. QTY. - - - - - - - - FORGED STEEL UNIONS Material Specification ASTM A-105, ASME SA-105 Manufacturing to MSS SP 83 (Class 6000 by method of MSS SP 83) CARBON STEEL ASTM A-105 Steel to Steel Seats Class 3000 Threaded Black NOMINAL PIPE SIZE 1/8" ¼" 3/8" ½" ¾" 1" 1¼" 1½" 2" 2½" 3" Class 3000 Socket Weld Black Class 6000 Threaded Black Class 6000 Socket Weld LIST $44.57 $44.57 $45.36 $38.53 $47.16 $61.62 $97.75 $116.57 $158.05 $391.71 $461.15 WGT. EACH 0.38 0.38 0.54 0.79 1.25 1.80 2.88 3.64 5.81 8.77 12.74 CTN. QTY. 25 25 25 25 25 25 18 14 9 5 4 LIST $52.49 $52.49 $52.49 $44.00 $51.33 $66.12 $106.66 $115.51 $166.31 $419.28 $505.45 WGT. EACH 0.34 0.38 0.54 0.75 1.22 1.76 2.73 3.47 5.62 8.70 12.98 CTN. QTY. 15 25 25 25 25 25 18 14 9 5 4 LIST - $116.77 $106.12 $95.07 $107.82 $139.48 $231.73 $271.37 $544.90 - - WGT. EACH - 0.59 0.84 1.38 2.01 3.28 3.96 6.82 12.16 - - CTN. QTY. - 25 25 25 25 18 14 9 5 - - LIST - $97.45 $97.45 $97.94 $113.85 $165.04 $255.27 $299.50 $564.04 - - WGT. EACH - 0.56 0.75 1.42 2.09 3.40 4.09 7.18 12.44 - - CTN. QTY. - 25 25 25 25 18 14 9 5 - - Sold in box only. FORGED STEEL HANDLE BAR UNIONS CARBON STEEL ASTM A-105 Steel to Steel Seats Class 3000 Threaded Black NOMINAL PIPE SIZE ³ ₈" ¹ ₂" ³ ₄" 1" 1¹ ₄" 1¹ ₂" 2" 2¹ ₂" 3" 4" LIST POA $51.26 $57.42 $75.26 $119.64 $125.92 $148.91 $279.90 $400.00 $810.38 WGT. EACH 0.50 0.91 1.58 2.28 3.48 4.66 7.07 11.40 15.42 36.13 CTN. QTY. 20 25 25 25 18 12 6 28 22 8 Revised: 6
NOTES
CORPORATE OFFICES 2 Holland Way Exeter, NH 03833 Tel: 603-418-2800 Fax: 603-418-2833 E-mail: marketing@anvilintl.com CUSTOMER SERVICE CENTERS UNITED STATES Tel: 800-301-2701 Fax: 708-534-5441 Email: customerservice@anvilintl.com LATIN AMERICA Tel: 800-301-2701 Fax: 708-534-5441 Email: latinoamerica@anvilintl.com CANADA Tel: 519-426-4551 Fax: 519-426-5509 Email: canadacs@anvilintl.com INTERNATIONAL Tel: 800-301-2701 Fax: 708-534-5441 Email: internationalsales@anvilintl.com REGIONAL DISTRIBUTION CENTERS UNITED STATES Illinois 7979 W. 183rd Street, Unit D Tinley Park, IL 60484 Texas 1401 Valley View Lane, Suite 150 Irving, TX 75061 Pennsylvania 800 Malleable Road Columbia, PA 17512 California 1470 S. Vintage Avenue Ontario, CA 91761 Florida 236 Outlook Point Drive, Suite 100 Orlando, FL 32809 INTERNATIONAL Canada 390 Second Avenue, Simcoe P.O. Box 40 Ontario, Canada, N3Y 4K9 b u i l d i n g c o n n e c t i o n s t h a t l a s t #605 / Printed in USA / 2017 July 3, 2017