Product Information Horizontal sliding panels function with a unique patented stainless steel bearing design. Bearings installed within the floor tracks rather than in the window panel allow panels to glide freely. This product is well suited for sliding huge glass panels for large openings from corner, side, and centre or into a cavity/pocket within the wall. Flush floor finish with no external strip drain required as the tracks act as the drain for the glass. Vitrocsa Sliding is the slimmest, highest performing product on the market. CHARACTERISTICS Tracks + Frames - Endless number of tracks. There is no limit! - Recessed and hidden within the floor, wall and ceiling - The slimmest tracks available start at only 32mm wide Vertical Profile (Interlock) - The slimmest available at only 18mm wide - Reinforced internally for high wind areas Glazing - Single, Double, Triple - Panel size up to 18m 2 (6x3m) vertical or horizontal - Sourced in Australia Drainage - Tracks designed to act as drains - No strip drains required as built-in sub sills allow for water to be collected and drained. Finishing - Air craft grade aluminium in natural anodised in 25 microns - Coloured anodising in Australia as an option - Powder coating in Australia as an option - Suitable for extreme environments with 15 year warranty Set down - Minimal set down required starting at only 65mm depth required to conceal the tracks from finished floor level FUNCTION Rollers - Stainless steel rollers bearings fitted within the tracks Operation - Smooth, easy operation Maintenance - Aluminium and stainless steel parts require minimal maintenance and can be done with ease with our removable tracks. - Extreme reliability and durability keeps maintenance to a minimum. OPTIONS Motorisation - Push button motorisation can be concealed within the structure. Locks - Various options available for locking mechanisms including electric locking. Trickle Air Vent - Allows for a continuous flow of fresh air without a security risk Flyscreens - Our profiles can be fit with flyscreens so they will work the same as glass sliding panels. Screens - Any material can be fit to our profiles including timber, stone and steel panels Partitions - A simplified sliding system is available for internal use Curving - A curved sliding system is available in single and double glazed Vitrocsa Australia 2015. All Rights Reserved 18 Underwood Ave Botany NSW 2019 Ph: 61+2 9695 1133 info@vitrocsa.com.au www.vitrocsa.com.au
Configurations Maximum glass panel sizes available 3m 6m 6m 3m Endless fixed & sliding panel configurations POCKET POCKET OR IN FRONT OF WALL No limit to the number of tracks and panels. Fixed panels note required to make up sliding doors. Panels can slide open from left, right, centre or corner. Corner opening + pocket/cavity slider Curved Sliding for radius over 4m Vitrocsa Australia 2015. All Rights Reserved 18 Underwood Ave Botany NSW 2019 Ph: 61+2 9695 1133 info@vitrocsa.com.au www.vitrocsa.com.au
Single Glazed Vitrocsa Swimms Mono 47 55 75 72 55 47
Double Glazed Vitrocsa Swimms Insulated 59 67 75 108 67 59
Triple Glazed Vitrocsa TH+ Insulated 58 66 44 80 146 66 58