Composite Production Systems Global Poly Linepipe

Headquarters 25 Bethridge Road Toronto, ON M9W 1M7 Canada Tel: +1 416 743 7111 Canada 3501 54 Avenue Southeast Calgary, AB T2C 0A9 Canada Tel: +1 403 503 0548 shawcor.com Shawcor Ltd. is a global energy services company specializing in products and services for the pipeline and pipe services segment of the oil and gas industry and related products for petrochemical and industrial markets. The Company operates through a network of fixed and mobile manufacturing and service facilities located around the world and is valued for its integrity, technology, and proven capability to execute the most complex projects in our industry. Composite Production Systems Global Poly Linepipe

Shawcor's HDPE pressure pipe and liners lower total installation and life cycle costs HDPE Pressure Pipe PE4710 PE4710 is a new and improved HDPE resin, with enhanced properties over the traditional PE3408 / PE3608 resins. Shawcor offers PE471 0 in all sizes and SDRs for use in all applications. The increased properties of PE4710 allow for higher pressure ratings without compromising the long term properties of the pipe. In accordance with ASTM D3350 and the Plastics Pipe Institute (PPI), PE471 0 qualifies for a design factor of 0.63 for water service, which is higher than the design factor of 0.50 for PE3408 / 3608. PE4710 is certified to CSA, NSF, AWWA, ASTM and NSFC for municipal applications. Description English SI Density 0.961 g/cc ASTM D1505 Flow Rate (HLMI) 8.0 g/10min ASTM D1238 Tensile Strength at Break 3,500 Psi 23 MPa ASTM D638 Elongation at Break 800% 800% ASTM D638 Flexural Modulus 150,000 Psi 1,034 MPa ASTM D790 Pent Slow Crack Growth Hydrostatic design Basis, 23 C (73 F) Hydrostatic Design Basis, 60 C (140 F) > 500 h > 500 h ASTM F1473 1,600 Psi 11.0 MPa ASTM D2837 1,000 Psi 6.9 MPa ASTM D2837 Pipe Dimensions and s 1 Extending the operational life of your steel pipeline through superior chemical, corrosion and erosion resistant liners. Improve the performance of your pipeline with Shawcor's wide variety of high density polyethylene (HDPE) pressure pipe and HDPE liners that can easily be customized from wall thickness to colour to resin. Our products offer significant technical and economic advantages, including ease of installation, reliability, flow assurance and lower total cost. Shawcor's HDPE pressure pipe and pipe liners are not only flexible and fatigue resistant but are also lightweight. Material characteristics like improved resistance to permeability and better resistance to chemicals, including hydrocarbons, even under elevated temperatures allow you to forgo costly chemical inhibition and maintenance associate with internal corrosion. Our Products Serve THE Following Applications Industrial mining applications, slurry and tailings lines Oilfield oil and gas gathering systems, coalbed methane recovery Pipe liner systems technology for steel pipe corrosion protection Natural gas distribution piping Siphon string velocity tubing string, continual gas well fluid lifting Water services municipal water service tubing, copper tube size Municipal potable water and sewage Associations and Certification Standards CSA NSF PPI AWWA ASTM API ASME IPS Pipe Size Actual OD SDR ID ¾" 1.050 11 200 0.849 0.095 0.13 0.41 1" 1.315 11 200 1.061 0.120 0.20 0.65 11 200 1.340 0.151 0.32 1.03 1 ¼" 1.660 13.5 160 1.399 0.123 0.26 0.86 15.5 139 1.433 0.107 0.23 0.75 17 125 1.452 0.098 0.21 0.69 7 335 1.325 0.271 0.61 2.00 7.3 320 1.349 0.260 0.59 1.94 9 252 1.453 0.211 0.49 1.62 1 ½" 1.900 11 200 1.533 0.173 0.41 1.36 13.5 160 1.601 0.141 0.34 0.13 15.5 139 1.639 0.123 0.30 0.99 17 126 1.663 0.112 0.28 0.91 5 500 1.368 0.475 1.25 4.10 6.3 380 1.576 0.377 1.04 3.42 7 335 1.656 0.339 0.96 3.13 7.3 320 1.686 0.325 0.92 3.02 2" 2.375 9 252 1.815 0.264 0.77 2.53 11 200 1.917 0.216 0.65 2.12 13.5 160 2.002 0.176 0.54 1.76 15.5 139 2.051 0.153 0.47 1.54 17 126 2.078 0.140 0.43 1.42 5 500 1.656 0.575 1.83 6.00 6.3 380 1.908 0.456 1.53 5.01. 7 335 2.006 0.410 1.40 4.59 7.3 320 2.042 0.393 1.35 4.43 2 ½" 2.875 9 252 2.199 0.319 1.13 3.70 11 200 2.322 0.261 0.94 3.10 13.5 160 2.423 0.213 0.78 2.57 15.5 139 2.483 0.185 0.69 2.26 17 126 2.517 0.169 0.63 2.08 5 500 2.016 0.700 2.71 8.90 6.3 380 2.321 0.556 2.27 7.43 7 335 2.440 0.500 2.08 6.81 7.3 320 2.485 0.479 2.00 6.57 3" 3.500 9 252 2.675 0.389 1.67 5.49 11 200 2.826 0.318 1.40 4.59 13.5 160 2.951 0.259 1.16 3.81 15.5 139 3.021 0.226 1.02 3.36 17 126 3.063 0.206 0.94 3.08 21 100 3.146 0.167 0.77 2.53 1. PE4710 with water at 23 C (73 F).

Pipe Dimensions and s IPS Pipe Size Actual OD SDR 4" 4.500 5" 5.563 6" 6.625 7" 7.125 8" 8.625 10" 10.750 ID 26 80 3.214 0.135 0.63 2.06 32.5 65 3.271 0.108 0.51 1.66 5 500 2.592 0.900 4.48 14.71 6.3 380 2.986 0.714 3.74 12.27 7 335 3.137 0.643 3.43 11.26 7.3 320 3.194 0.616 3.31 10.86 9 252 3.440 0.500 2.77 9.08 11 200 3.633 0.409 2.32 7.60 13.5 160 3.794 0.333 1.92 6.30 15.5 139 3.885 0.290 1.69 5.54 17 126 3.938 0.265 1.55 5.10 21 100 4.046 0.214 1.27 4.16 26 80 4.133 0.173 1.04 3.40 32.5 65 4.207 0.138 0.83 2.73 5 500 3.206 1.112 6.85 22.47 6.3 380 3.691 0.883 5.72 18.76 7 335 3.878 0.795 5.25 17.21 7.3 320 3.948 0.762 5.06 16.61 9 252 4.253 0.618 4.23 13.87 11 200 4.490 0.506 3.54 11.62 13.5 160 4.690 0.412 2.94 9.64 15.5 139 4.802 0.359 2.59 8.48 17 126 4.870 0.327 2.37 7.77 21 100 5.001 0.265 1.94 6.37 26 80 5.109 0.214 1.58 5.20 32.5 65 5.200 0.171 1.28 4.19 5 500 3.816 1.325 9.72 31.88 6.3 380 4.397 1.051 8.11 26.60 7 335 4.619 0.946 7.43 24.39 7.3 320 4.700 0.908 7.18 23.57 9 252 5.065 0.736 6.00 19.68 11 200 5.349 0.602 5.02 16.46 13.5 160 5.584 0.491 4.17 13.67 15.5 139 5.720 0.427 3.66 12.02 17 126 5.798 0.390 3.37 11.04 21 100 5.957 0.315 2.75 9.02 26 80 6.084 0.255 2.25 7.37 32.5 65 6.195 0.203 1.80 5.92 6.3 380 4.727 1.131 9.38 30.78 7 335 4.967 1.018 8.60 28.23 7.3 320 5.056 0.976 8.31 27.25 9 252 5.447 0.792 6.94 22.76 11 200 5.751 0.648 5.81 19.06 13.5 160 6.006 0.528 4.82 15.81 15.5 139 6.150 0.460 4.24 13.92 17 126 6.237 0.419 3.89 12.76 21 100 6.406 0.339 3.18 10.44 26 80 6.544 0.274 2.60 8.52 32.5 65 6.661 0.219 2.09 6.87 6.3 380 5.723 1.369 13.75 45.10 7 335 6.013 1.232 12.60 41.35 7.3 320 6.121 1.181 12.17 39.91 9 252 6.594 0.958 10.16 33.35 11 200 6.963 0.784 8.51 27.91 13.5 160 7.270 0.639 7.06 23.17 15.5 139 7.446 0.556 6.21 20.37 17 126 7.550 0.507 5.70 18.69 21 100 7.754 0.411 4.67 15.33 26 80 7.923 0.331 3.80 12.46 32.5 65 8.063 0.265 3.07 10.06 7 335 7.494 1.536 19.59 64.25 7.3 320 7.627 1.473 18.91 62.04 9 252 8.219 1.194 15.79 51.80 11 200 8.679 0.977 13.21 43.35 13.5 160 9.062 0.796 10.96 35.97 15.5 139 9.281 0.693 9.64 31.64 17 126 9.410 0.632 8.85 29.03 Pipe Dimensions and s IPS Pipe Size Actual OD SDR 12" 12.750 14" 14.000 16" 16.000 18" 18.000 20" 20.000 22" 22.000 24" 24.000 ID 21 100 9.667 0.511 7.24 23.75 26 80 9.874 0.413 5.91 19.38 32.5 65 10.048 0.331 4.77 15.66 7 335 8.889 1.821 27.54 90.36 7.3 320 9.046 1.747 26.60 87.27 9 252 9.746 1.417 22.22 72.91 11 200 10.291 1.160 18.60 61.04 13.5 160 10.749 0.944 15.42 50.60 15.5 139 11.005 0.823 13.58 44.57 17 126 11.160 0.750 12.45 40.86 21 100 11.463 0.607 10.20 33.46 26 80 11.711 0.490 8.31 27.27 32.5 65 11.919 0.392 6.70 21.99 7 335 9.760 2.000 33.21 108.96 7.3 320 9.934 1.918 32.07 105.21 9 252 10.701 1.556 26.80 87.91 11 200 11.301 1.273 22.42 73.56 13.5 160 11.802 1.037 18.60 61.03 15.5 139 12.086 0.903 16.37 53.69 17 126 12.253 0.824 15.02 49.29 21 100 12.586 0.667 12.31 40.38 26 80 12.859 0.538 10.02 32.88 32.5 65 13.086 0.431 8.09 26.55 7 335 11.154 2.286 43.38 142.33 7.3 320 11.353 2.192 41.88 137.42 9 252 12.231 1.778 34.99 114.80 11 200 12.926 1.450 29.20 95.78 13.5 160 13.488 1.185 24.29 79.71 15.5 139 13.812 1.032 21.38 70.13 17 126 14.005 0.941 19.61 64.34 21 100 14.387 0.761 16.05 52.65 26 80 14.696 0.615 13.09 42.96 32.5 65 14.957 0.492 10.56 34.64 7 335 12.549 2.571 54.89 180.10 7.3 320 12.772 2.466 53.01 173.92 9 252 13.760 2.000 44.28 145.28 11 200 14.532 1.636 37.05 121.55 13.5 160 15.174 1.333 30.74 100.87 15.5 139 15.539 1.161 27.05 88.76 17 126 15.755 1.059 24.83 81.45 21 100 16.183 0.857 20.33 66.70 26 80 16.533 0.692 16.57 54.38 32.5 65 16.894 0.553 13.35 43.80 9 252 15.289 2.222 54.67 179.36 11 200 16.145 1.818 45.75 150.09 13.5 160 16.859 1.481 37.97 124.56 15.5 139 17.265 1.290 33.41 109.60 17 126 17.506 1.176 30.65 100.54 21 100 17.981 0.952 25.10 82.36 26 80 18.369 0.769 20.47 67.16 32.5 65 18.695 0.615 16.51 54.16 9 252 16.818 2.444 66.15 217.03 11 200 17.760 2.000 55.35 181.60 13.5 160 18.545 1.630 45.94 150.71 15.5 139 18.991 1.419 40.42 132.62 17 126 19.256 1.294 37.08 121.66 21 100 19.779 1.048 30.38 99.66 26 80 20.206 0.846 24.77 81.27 32.5 65 20.565 0.677 19.97 65.53 9 252 18.347 2.667 78.73 258.28 11 200 19.375 2.182 65.88 216.12 13.5 160 20.231 1.778 54.67 179.36 15.5 139 20.717 1.548 48.11 157.83 17 126 21.007 1.412 44.13 144.78 21 100 21.577 1.143 36.15 118.60 26 80 22.043 0.923 29.48 96.71 32.5 65 22.434 0.738 23.77 77.99

MDPE Gas Distribution Pipe Data and s PE2708 and PE2708 Plus Our MDPE natural gas distribution piping is offered in a conventional uni-modal PE2708 resin and our bi-modal PE2708 Plus grade high performance resin. These resins meet the requirements of CSA B137.4. Gas pipe manufactured with our PE2708 Plus material uses a bi-modal medium density polyethylene resin that offers improved resistance to rapid crack propagation (RCP) as well as exceptional slow crack growth (SCG) (PENT performance). With these enhanced properties, CSA allows you to operate distribution systems at higher pressures over the conventional uni-modal 2708 material. PE2708 Slow Crack Growth (PENT) Per ASTM F1473 PE2708 Plus > 1,000 Hours > 15,000 Hours Crack Propagation (RCP) Full Scale, Pc @ 0 C (32 F) Per ISO 13477 90 Psi > 560 Psi S-4, Pc @ 0 C (32 F) Per ISO 13477 15 Psi > 145 Psi S-4, Tc @ 5 Bar Per ISO 13477 16 C / 60 F < -2 C / 28 F SDR Average Outside Diameter (mm) Thickness (mm) Average Inside Diameter (mm) Weight (lb per meter) ¾" IPS 26.7 3.03 20.60 0.49 1" 1PS 33.4 3.79 25.80 0.77 1 ¼" IPS 42.2 4.80 32.60 1.23 1 ½" IPS 48.3 5.48 37.30 1.61 2" IPS 60.3 6.86 46.60 2.52 3" IPS 8.8 88.9 10.10 68.70 5.46 129 Psi 145 Psi 4" IPS 114.3 12.98 88.30 9.03 6" IPS 168.3 19.12 130.00 19.58 8" IPS 219.1 24.89 169.30 33.21 10" IPS 273.1 31.03 211.00 51.59 12" IPS 323.9 36.80 250.20 72.57 ¾" IPS 26.7 2.42 21.80 0.41 11 1" IPS 33.4 3.04 27.30 0.63 100 Psi 113 Psi 1 ¼" IPS 10 42.2 4.22 33.70 1.10 112 Psi 125 Psi 1 ½" IPS 48.3 4.39 39.50 1.33 2" 1PS 60.3 5.48 49.40 2.07 3" IPS 88.9 8.08 72.70 4.50 4" 1PS 114.3 10.39 93.50 7.43 11 6" IPS 168.3 15.30 137.70 16.10 100 Psi 113 Psi 8" 1PS 219.1 19.92 179.20 27.30 10" 1PS 273.1 24.82 223.40 42.40 12" IPS 323.9 29.44 265.00 59.65 2" 1PS 60.3 4.47 51.40 1.72 3" IPS 88.9 6.59 75.70 3.74 4" IPS 114.3 8.47 97.40 6.17 6" 1PS 13.5 168.3 12.46 143.30 13.38 80 Psi 90 Psi 8" 1PS 219.1 16.23 186.60 22.68 10" IPS 273.1 20.23 232.60 35.23 12" IPS 323.9 23.99 275.90 49.56 ½" CTS 15.2 2.18 10.90 0.20 7 1" CTS 27.9 3.99 3.99 20.00 167 Psi 188 Psi 1. Other pipe diameters and SDR ratings are available on request. 2. General packaging is available in coils, reels or stick lengths.

HD-RC Resistance to Cracking Liners Bi-modal polyethylene liners that offer complete protection for higher temperatures, aggressive chemicals and hydrocarbons. Manufactured from the highest performing grade of resins available, our HD- RC liner is designed with superior slow crack growth (SCG) resistance, exceptional notch resistance and higher tensile and flexural modulus strength. Suitable for temperature extreme up to 80 C (176 F). ASTM D3350: cell classification polyethylene PE445584A PPI designation: PE 100 Eliminates corrosion Chemically compatible and broadens oil and gas applications with H 2 S and CO 2 Improved temperature performance compared to conventional PE materials Adds years of continued service to older pipelines Value Density (Natural Resin) 0.950 g/cc 0.950 g/cc ASTM D1505 Thermal Stability > 428 F > 220 C ASTM D3350 Mechanical Tensile Strength (Yield) > 3,500 Psi > 24.1 MPa ASTM D638 Flexural Modulus 150,000 Psi 1,030 MPa ASTM D790B 1 Brittleness Temperature < -103 F < - 75 C Astm d746 HD-RT Raised Temperature Liners Made from a raised temperature polyethylene material specifically designed for the extreme conditions present in oil and gas environments, HD-RT liners share the same properties as our HR-RC liners with the addition of high temperature performance (up to 95 C or 203 F). Good creep resistance Excellent slow crack growth performance Improved cyclic fatigue resistance Withstands highly oxidative conditions Value Density (Natural Resin) 0.950 g/cc 0.950 g/cc ASTM D1505 Thermal Stability > 428 F > 220 C ASTM D3350 Mechanical Tensile Strength (Yield) > 3,500 Psi > 24.1 MPa ASTM D638 HDPE Liners Notched Izod Impact at 23 C 9.1 Ft-Lb/In 490 (J/M) Astm d256 (Method a) Flexural Modulus 152,000 Psi 1,050 MPa ASTM D790B 1 HD-PG Plus Grade Liners Protect your metallic piping from internal corrosion and chemical attach with our HD-PG lined pipe system. The smooth wall liner provides high flow capacity with reduced friction and pressure loss. Suitable for temperature extremes up to 60 C (140 F). ASTM D 3350 cell classification: PE445474C PPI designation: PE4710 per PP TR-4 Eliminates corrosion Adds years of continued service to older pipelines Increases flow capacity Value Density (Black) 0.960 g/cc 0.960 g/cc ASTM D792 Tensile Strength (Yield) > 3,500 Psi > 24.1 MPa ASTM D638 Flexural Modulus 150,000 Psi 1,030 MPa ASTM D790 Brittleness Temperature Slow Crack Growth (SCG) PENT at 2.4 MPa at 80 C (176 F) < -103 F < -75 C ASTM D746 > 2,000 Hours > 2,000 Hours ASTM P1473 at 80 C (176 F) at 90 C (194 F) Pipe Crack Propagation PC S-4 at 32 F: 0 F (-18 C) Crack Propagation TC S-4 at 145 Psi (12 bar) > 10,000 Hours > 10,000 Hours Astm f1473 > 7,000 Hours > 7,000 Hours Astm f1473 > 174 Psi > 12 Bar ISO 13477 < 0 F < -18 C ISO 13477 Brittleness Temperature < -103 F < - 75 C ASTM D746 Notched Izod Impact at 23 C at 80 C (176 F) at 90 C (194 F) Pipe Crack Propagation PC S-4 at 32 F: 0 F (-18 C) Crack Propagation TC S-4 at 145 Psi (12 bar) 9.1 Ft-Lb/In 490 (J/M) ASTM D256 (Method A) > 10,000 Hours > 10,000 Hours ASTM F1473 > 10,000 Hours > 10,000 Hours ASTM F1473 > 174 Psi > 12 Bar ISO 13477 < 2 F < -17 C ISO 13477