Advanced Mechatronics System (AMS) LabVolt Series Datasheet Festo Didactic en 220 V - 50 Hz 04/2018
Table of Contents General Description 2 Packaging Station 3 Handling Station 3 Features & Benefits 3 List of Equipment 4 List of Manuals 4 Table of Contents of the Manual(s) 5 Optional Equipment 5 Equipment Description 6 Optional Equipment Description 10 General Description The Advanced Mechatronics System (AMS) is a turnkey training system fully aligned with the standards of a globally recognized program SIEMENS Mechatronic Systems Certification Program (SMSCP) and uses industrial grade components found in today s mechatronic applications. It answers the needs of vocational schools and training centers seeking a cost-effective mechatronics teaching solution in order to train skilled operators. The AMS reproduces the main steps of an industrial packaging line. Students learn about pneumatic distribution, filling, quality control, product sorting, storage and retrieval, network communication, and motor control sub-systems. In accordance with the SMSCP, the AMS includes hardware components required by this certification. The course material follows a system approach and covers the fields of electricity, mechanics, fluid power, and programmable logic controllers, as well as more advanced subjects. The AMS consists of a packaging station and a handling station. Each of these stations can operate independently or can be linked together to work as a whole in a complete, sequential process. Both stations are equipped with pneumatic, electrical, and fault panels. For more information about SMSCP and contact details, see the "Siemens SMSCP FAQ & Information" document in the "Downloads" section of the Festo Didactic website. 2 Festo Didactic
Packaging Station Handling Station Features & Benefits Train mechatronics students to meet globally recognized industrial standards Meets all the hardware requirements for the SIEMENS Mechatronics Systems Certification Program (SMSCP). Curriculum is aligned with the SMSCP teaching method designed to keep students engaged, optimizing their understanding of the entire system. Provides 60 hours of laboratory divided between the four fields of the Level 1 certification (operator level), in addition to advanced subjects. Festo Didactic 3
Focus on teaching Accompanying lab material supports teachers during course planning. Each station comes pre-assembled, pre-wired, and pre-programmed and can be easily reset to factory settings. Work with real-world hardware components and recent technologies The system integrates recent technologies that students will encounter in their jobs, such as SIEMENS S7-1500 PLC, SIEMENS Comfort Panel HMI, COGNEX In-Sight 7000 vision system, as well as three-phase and single-phase industrial conveyors, and servo motion controllers. Easily accessible terminal blocks simplify electrical signal measurement during troubleshooting. Integrate it in multiple pedagogical and lab settings The two stations can work independently or together. Connecting the stations together (mechanically and electrically) is quick and easy. The stations are wheeled and fit through a standard door. Each station can be sold separately. List of Equipment Qty Description Model number 1 PLC Software (Step 7 Professional) - 1 User 5939-00 1 Packaging Station 5961-05 1 Handling Station 5962-05 1 AMS Tools and Accessories 5969-00 List of Manuals Manual Description number AMS - Electrical and Pneumatics Schematics (Drawing Set) 20570-00 AMS - Electrical and Pneumatics Schematics (Drawing Set) 20570-05 AMS - Electrical and Pneumatics Schematics (Drawing Set) 20570-10 AMS - Electrical and Pneumatics Schematics (Drawing Set) 20570-15 AMS - Electrical and Pneumatics Schematics (Drawing Set) 20571-00 AMS - Electrical and Pneumatics Schematics (Drawing Set) 20571-05 AMS - Electrical and Pneumatics Schematics (Drawing Set) 20571-10 AMS - Electrical and Pneumatics Schematics (Drawing Set) 20571-15 Familiarization (Student Manual) 89788-00 Familiarization (Instructor Guide) 89788-10 Electricity (Student Manual) 89789-00 Electricity (Instructor Guide) 89789-10 Mechanics (Student Manual) 89790-00 Mechanics (Instructor Guide) 89790-10 Pneumatics (Student Manual) 89791-00 Pneumatics (Instructor Guide) 89791-10 Programmable Logic Controllers (Student Manual) 89792-00 Programmable Logic Controllers (Instructor Guide) 89792-10 Machine Vision (Student Manual) 89793-00 Machine Vision (Instructor Guide) 89793-10 4 Festo Didactic
Table of Contents of the Manual(s) Familiarization (Student Manual) (89788-00) 1 Presentation of the System 2 System Operation 3 System Logic Electricity (Student Manual) (89789-00) 1 Electrical Supply and Routing 2 Switches, Sensors, and Actuators 3 DC and Step Motors Mechanics (Student Manual) (89790-00) 1 Fixed Components 2 Moving Parts 3 Belt, Chain, and Gear Drives Pneumatics (Student Manual) (89791-00) 1 Air Supply, Conditioning, and Distribution 2 Pneumatic Actuators 3 Circuit Valves Programmable Logic Controllers (Student Manual) (89792-00) 1 PLC Components 2 Editing Software 3 PLC Programming Machine Vision (Student Manual) (89793-00) 1 Introduction to the Camera Software Part 1 2 Introduction to the Camera Software Part 2 3 Using the Camera Software Optional Equipment Qty Description Model number 1 Air Compressor 6410-C5 1 1 Can be used to supply compressed air to the training system. Festo Didactic 5
Equipment Description PLC Software (Step 7 Professional) - 1 User 5939-00 The PLC Software (Step 7 Professional) is a programming software that is required for programming some programmable logic controllers. The following variants are available, each giving access to the Step 7 Professional software for a specified number of users. PLC Software (Step 7 Professional) - 1 User, Model 5939 PLC Software (Step 7 Professional) - 12 Users, Model 5939-A Specifications Parameter Software Features Computer Requirements Value Step 7 Professional Designed for SIMATIC controllers, Step 7 allows programming in LAD, FBD, and STL languages. It also includes tools for graphic and high-level language programming. A currently available personal computer Pentium type with RS-232 serial port, running under one of the Microsoft operating systems, Windows 2000, Windows XP, Windows Vista or Windows 7, is required. Packaging Station 5961-05 The purpose of the Packaging Station is to fill boxes with parts and verify the content before they are sent to the Handling station. The Packaging Station includes a control panel with emergency button, a rotary selector switch, three pushbuttons, and three indicator lights. It also includes a conveyor with two magazines and two pneumatic actuators, a filling station, a camera for quality control, and a sorting station. 6 Festo Didactic
List of Manuals Manual Description number AMS - Electrical and Pneumatics Schematics (Drawing Set) 20570-00 AMS - Electrical and Pneumatics Schematics (Drawing Set) 20570-05 AMS - Electrical and Pneumatics Schematics (Drawing Set) 20570-10 AMS - Electrical and Pneumatics Schematics (Drawing Set) 20570-15 Familiarization (Student Manual) 89788-00 Familiarization (Instructor Guide) 89788-10 Electricity (Student Manual) 89789-00 Electricity (Instructor Guide) 89789-10 Mechanics (Student Manual) 89790-00 Mechanics (Instructor Guide) 89790-10 Pneumatics (Student Manual) 89791-00 Pneumatics (Instructor Guide) 89791-10 Programmable Logic Controllers (Student Manual) 89792-00 Programmable Logic Controllers (Instructor Guide) 89792-10 Machine Vision (Student Manual) 89793-00 Machine Vision (Instructor Guide) 89793-10 Table of Contents of the Manual(s) Familiarization (Student Manual) (89788-00) 1 Presentation of the System 2 System Operation 3 System Logic Electricity (Student Manual) (89789-00) 1 Electrical Supply and Routing 2 Switches, Sensors, and Actuators 3 DC and Step Motors Mechanics (Student Manual) (89790-00) 1 Fixed Components 2 Moving Parts 3 Belt, Chain, and Gear Drives Pneumatics (Student Manual) (89791-00) 1 Air Supply, Conditioning, and Distribution 2 Pneumatic Actuators 3 Circuit Valves Programmable Logic Controllers (Student Manual) (89792-00) 1 PLC Components 2 Editing Software 3 PLC Programming Machine Vision (Student Manual) (89793-00) 1 Introduction to the Camera Software Part 1 Festo Didactic 7
2 Introduction to the Camera Software Part 2 3 Using the Camera Software Handling Station 5962-05 The purpose of the Handling Station is to put a cover on the filled boxes and stock them in a storage rack. The Handling Station includes a touchscreen human-machine interface with emergency button, a conveyor with two magazines and two pneumatic actuators, a cover distribution station, and a storage handling station. List of Manuals Manual Description number AMS - Electrical and Pneumatics Schematics (Drawing Set) 20571-00 AMS - Electrical and Pneumatics Schematics (Drawing Set) 20571-05 AMS - Electrical and Pneumatics Schematics (Drawing Set) 20571-10 AMS - Electrical and Pneumatics Schematics (Drawing Set) 20571-15 Familiarization (Student Manual) 89788-00 Familiarization (Instructor Guide) 89788-10 Electricity (Student Manual) 89789-00 Electricity (Instructor Guide) 89789-10 Mechanics (Student Manual) 89790-00 Mechanics (Instructor Guide) 89790-10 Pneumatics (Student Manual) 89791-00 Pneumatics (Instructor Guide) 89791-10 Programmable Logic Controllers (Student Manual) 89792-00 Programmable Logic Controllers (Instructor Guide) 89792-10 Machine Vision (Student Manual) 89793-00 Machine Vision (Instructor Guide) 89793-10 Table of Contents of the Manual(s) Familiarization (Student Manual) (89788-00) 1 Presentation of the System 2 System Operation 8 Festo Didactic
3 System Logic Electricity (Student Manual) (89789-00) 1 Electrical Supply and Routing 2 Switches, Sensors, and Actuators 3 DC and Step Motors Mechanics (Student Manual) (89790-00) 1 Fixed Components 2 Moving Parts 3 Belt, Chain, and Gear Drives Pneumatics (Student Manual) (89791-00) 1 Air Supply, Conditioning, and Distribution 2 Pneumatic Actuators 3 Circuit Valves Programmable Logic Controllers (Student Manual) (89792-00) 1 PLC Components 2 Editing Software 3 PLC Programming Machine Vision (Student Manual) (89793-00) 1 Introduction to the Camera Software Part 1 2 Introduction to the Camera Software Part 2 3 Using the Camera Software AMS Tools and Accessories 5969-00 The AMS Tools and Accessories kit contains all the tools and accessories needed to operate the Advanced Mechatronics System, Model 5903, including a toolbox, a multimeter, a ball bearing, pliers, various types of screwdrivers, hexagonal keys, a socket set, and digital calipers. Festo Didactic 9
Optional Equipment Description Air Compressor (Optional) 6410-C5 The Air Compressor is a quiet device well suited for classroom and school laboratories. The Air Compressor can be used to provide compressed air to different components. A conditioning unit, Model 6411-A, must be connected to the compressor for certain applications. The Circulator Pump is available in different variants depending on ac power network voltages and frequencies. Because of this, the actual module may vary from the one shown in the picture. Specifications Parameter Power Requirements Current Service Installation Tank Capacity Flow Rate Maximum Pressure Noise Level Physical Characteristics Dimensions (H x W x D) Net Weight Value 3.4 A Standard single-phase ac outlet 30 L (6.6 gal) 50 L/min at 620 kpa (1.8 SCFM at 90 psi) 800 kpa (120 psi) 58 db(a) TBE 37 kg (81.6 lb) 10 Festo Didactic
Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification. Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. Festo Didactic Inc. 2018. All rights reserved. Festo Didactic SE Rechbergstrasse 3 73770 Denkendorf Germany P. +49(0)711/3467-0 F. +49(0)711/347-54-88500 Festo Didactic Inc. 607 Industrial Way West Eatontown, NJ 07724 United States P. +1-732-938-2000 F. +1-732-774-8573 Festo Didactic Ltée/Ltd 675 rue du Carbone Québec QC G2N 2K7 Canada P. +1-418-849-1000 F. +1-418-849-1666 www.labvolt.com www.festo-didactic.com Festo Didactic 11