ASSEMBLY INSTRUCTIONS INFINITI 8mm SLIDER/SLIDER WITH SIDE PANEL THIS PRODUCT IS UNIVERSAL. LEFT HAND OPENING ILLUSTRATED. CHANGE THE HAND BY TURNING THE DOOR/SIDE PANEL UPSIDE DOWN. V03.09.2015
BEFORE YOU START, HERE IS SOME IMPORTANT INFORMATION 1) General Information Please inspect this product upon delivery. Any missing parts or manufacturing defects must be reported immediately to the supplier. Damage of defects reported later will not be accepted. TAKE CARE WHEN HANDLING GLASS PARTS-AVOID HEAVY CONTACT BETWEEN THE GLASS EDGES AND ANY HARD SURFACE. Glass breakage claims will not be accepted after the product has been unpacked. Please note: Aluminium is a soft metal, and undergoes a series of extrusion, fabrication, polishing and anodising processes in order to create your finished shower enclosure. Some light surface marks are normal, and is a result of the manufacturing processes. Quality control has ensured that this item is of a good standard, and is fit for purpose. 2) Additional notes Please read these instructions carefully before starting installation. Special care should be taken when drilling walls to avoid hidden pipes or electrical cables. Note: This product is heavy and may require two people to install. TOOLS REQUIRED DESCRIPTION PART IMAGE DESCRIPTION PART IMAGE Tape measure Drill Spirit level Flat-head Screwdriver Pencil Cross head Screwdriver Ø6mm Drill bit Hammer Ø3.2mm Drill bit Silicone Sealant This product is heavy and may require two people to install. 1
ASSEMBLY INSTRUCTIONS-EXPLODED VIEW AND PARTS LIST (44) (29) (28) (27) (26) (25) (1) (2) (3) (4) (5) (6) (24) (31) (8) (23) (22) (7) (21) (8) (20) (19) (18) (17) (9) (10) (11) (15R) (1) 1 x Cover Cap (Wall profile) (2) 10 x Wall Plugs (3) 1 x Wall Profile (4) 1 x Single Blade Sealer (5) 1 x Fix Glass Panel (6) 4 x White Nylon washer (7) 1 x Vertical Sealer on Fix Panel (8) 6 x Screw ST4X40 (9) 1 x Bottom Sliding Guide (10) 1 x Bottom Bracket on Fix Panel (11) 1 x Bottom Rail Profile (12L) 1 x Cover LH for Bottom Bracket on Fix Panel (12R)1 x Cover RH for Bottom Bracket on Fix Panel (13) 1x Bottom Clipper (14) 1x Bottom Bracket on Opening Side (15L) 1x Cover LH for Bottom Bracket (14) (15R) 1x Cover RH for Bottom Bracket (14) (16) 2 x Flat Screw ST4X40 2 (16) (15L) (12L) (13) (14) (32) (33) (12R) (30) (17) 1 x Wall profile (18) 1 x Magnetic Strip on Wall Profile (17) (19) 1 x Magnetic Strip on Sliding Panel (20) 1 x Handle (21) 1 x Sliding Glass Panel (22) 4 x Screw ST3.5X30 (23) 1 x Wall Bracket (24) 2 x Roller (25) 1 x Top Rail Profile (26) 2 x Fixing Bracket Inside Part (27) 2 x Fixing Bracket Inside Washer (28) 2 x Fixing Bracket Outside Washer (29) 2 x Fixing Bracket Outside Cover (30) 1 x Sealer Mounting Tool (31) 1 x Hex Key 3mm (32) 1 x Hex Key 2.5mm (33) 2 x Hex Key 2mm (44) 1 x Rail Profile Cover
ASSEMBLY INSTRUCTIONS If you require help, we advise you to contact a competent plumber Installation Steps Step 1 THESE DIMENSIONS ASSUME THE WALLS ARE PLUMB AND THE SHOWER TRAY IS LEVEL, AND THAT THE WALLS ARE TILED DOWN TO THE TOP OF THE TRAY USING A 10mm TILE/ WET WALL PANEL. 1165-1190 1365-1390 1565-1590 1665-1690 3
Step 2 MAKE SURE THE TRAY IS LEVEL USING A SPIRIT LEVEL BEFORE INSTALLING THIS SHOWER PANEL DOOR. /,, 4X 4X 10 φ6mm 4X 4X Step 3 4
S t e p 4 Step 5 5
Step 6 2X 2X Ø6mm 2X Step 7 6
Step 8 1200=594 1400/1600/1700=674 1200=594 1400/1600/1700=674 Step 9 7
Step 10 Ø3.2mm Step 11 8
Step 12 2.5mm 2.5mm Step 13 9
Step 14 Step 15 10
Step 16 11
Step 17 4X 4X Ø6mm Step 18 12
Step 19! NO! OK Step 20 24H Silicone ( according to the thick line position) where the vertical profiles meet the wall, parts meet parts and the glass panels meet the tray. 13
CARE AND MAINTENANCE 1) AFTER CARE INSTRUCTIONS Regularly clean your shower product with warm soapy water to prevent lime scale build up. Do not use abrasive cleaning fluids or materials, or strong chemical cleaners as this will damage the product surface. 2) MAINTENANCE Clean the plastic parts with a cloth and mild detergent. Never use any abrasive creams, dissolvents, acetone or detergents and disinfectants that contain chlorine. The supplier accepts no liability for any type of use of care other than those contained in these instructions. The supplier reserves the right to introduce technical changes without notice. COMMITMENT TO QUALITY It is our intention that the quality and functions of this product are of the highest standard. If you require help we advise you firstly contact a competent plumber. However we understand that this may not always be the case, so should you experience any problems please contact our customer services quoting the following: Product name: 8mm Slider Product code: 110041208/110041408/110041608/110041708 Customer help line number:0344 804 48 48 14
ASSEMBLY INSTRUCTIONS-EXPLODED VIEW AND PARTS LIST (43) (42) (41) (40) (1) (34) (35) (6) (36) (3) (37) (38) (8) (4) (2) (39) (1). 1 x Cover Cap (Wall profile) (2) 4 x Wall Plugs (3) 1 x Wall Profile (4) 1 x Single Blade Sealer (6) 4 x White Nylon washer (8) 4 x Screw ST4X40 (34) 1 x Conceal Profile (35) 1 x Side Panel (36) 4 x PVC washer (37) 4 x Screw St4x16 (38) 4 x Grey Nylon Washer (39) 4 x Stainless Steel Washer (40) 1x Cover for Rail Profile (41) 2x Screw M5x20 (42) 1 x Grey Nylon Washer (43) 1 x Transparent PVC Washer 15
ASSEMBLY INSTRUCTIONS If you require help, we advise you to contact a competent plumber Installation Steps Step 1 THESE DIMENSIONS ASSUME THE WALLS ARE PLUMB AND THE SHOWER TRAY IS LEVEL, AND THAT THE WALLS ARE TILED DOWN TO THE TOP OF THE TRAY USING A 10mm TILE/ WET WALL PANEL. 10 10 765-790 865-890 10 10 1165-1190 1365-1390 1565-1590 1665-1690 16
Step 2 MAKE SURE THE TRAY IS LEVEL USING A SPIRIT LEVEL BEFORE INSTALLING THIS SHOWER PANEL DOOR. /,, 4X 4X 1 0 φ6mm 4X 4X Step 3 17
S t e p 4 18
Step 5 Step 6 19
Step7! NO! OK Step 8 24H Silicone ( according to thick line position) where the vertical profiles meet the wall, parts meet parts and the glass panels meet the tray. 20
CARE AND MAINTENANCE 1) AFTER CARE INSTRUCTIONS Regularly clean your shower product with warm soapy water to prevent lime scale build up. Do not use abrasive cleaning fluids or materials, or strong chemical cleaners as this will damage the product surface. 2) MAINTENANCE Clean the plastic parts with a cloth and mild detergent. Never use any abrasive creams, dissolvents, acetone or detergents and disinfectants that contain chlorine. The supplier accepts no liability for any type of use of care other than those contained in these instructions. The supplier reserves the right to introduce technical changes without notice. COMMITMENT TO QUALITY It is our intention that the quality and functions of this product are of the highest standard. If you require help we advise you firstly contact a competent plumber. However we understand that this may not always be the case, so should you experience any problems please contact our customer services quoting the following: Product name: 8mm Side Panel Product code: 10058008/10059008 Customer help line number:0344 804 48 48 21
INSTALLERS NOTES 22
Victoria Plum Limited,Bridgehead Business Hessle, HU13 0DG Park 15 20150914 Shower enclosures with aluminium profiles and safety glass The packaging you have received with your product is 100% recyclable. It must be disposed of in a safe and environmentally friendly way. We suggest you take it to the local landfill site and discard in the designated bins.