Flux Cored Wires Dual Shield

Similar documents
Dec.2006 / KWAI. Flux-Cored Wire for Gas Shield Arc Welding "DWA-55ESR"

Rev. 05 SC-70ML. METAL CORED ARC WELDING CONSUMABLES FOR Mild & 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD.

TYPICAL APPLICATIONS

OK FLUX AWS A5.5.17/A5.23

Rev. 02. SC-71LHM Cored. FLUX CORED ARC WELDING CONSUMABLE FOR WELDING OF MILD & 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD.

The following points should be considered when selecting the proper coated electrode. 1. Match the mechanical properties of the base metal.

7018 MR. Conformances

METAL-CORED GMAW-C CONSUMABLES WELDING CONSUMABLES CATALOG

Excellent for rusty, scaly, oily plate and pipes. Excellent for open root pass welding

Rev. 04. Supercored 71H. FLUX CORED ARC WELDING CONSUMABLES FOR WELDING OF Mild & 490Mpa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD.

Productivity Enhancements for GMAW of Titanium Carrie Davis and Michael E. Wells Naval Surface Warfare Center, Carderock Division

Rev. 02 SF-71. FLUX CORED ARC WELDING CONSUMABLE FOR WELDING OF MILD & 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD.

Flux Cored Wire (FCW)

71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding. Weld Metal - Chemistry

Outershield Wires Product Catalog Gas-Shielded Flux Cored Wires.

Bismuth-free Stainless Flux-Cored Wires for High Service Temperatures

STICK ELECTRODE PRODUCT CATALOG

EXCALIBUR STICK (SMAW) WELDING CONSUMABLE

DW For Super duplex stainless ASTM3275 and ASTM32760 grade. AWS A5.22 E2594T1-1,-4 DW-N625

Rev. 03. Supercored 71. FLUX CORED ARC WELDING CONSUMABLE FOR WELDING OF MILD & 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD.

Easier to Use... Structurally Sound

OK TUBROD CORED WIRES PRODUCT BRIEF

MIG WIRE PRODUCT CATALOG

Hobart Element. Low Manganese Filler Metals

Typical all weld metal composition, % C 0,03 Si 0,7 Mn 1,45 Cr 19,5 Ni 10 Mo 0,3 Cu 0,3 (C1&M21)

MAG wire. Welding Consumables Selection. MAG MIG wire/rod. Welding Consumables Selection. Specifi cation AWS JIS. Product name

Welding duplex stainless steel the ESAB way

Rev. 00 SC-71MSR FLUX CORED ARC WELDING CONSUMABLE FOR WELDING OF LOW-TEMPERATURE SERVICE STEEL HYUNDAI WELDING CO., LTD.

BÖHLER WELDING FILLER MATERIAL SELECTION

Seamless Cored Wires. Productive Dependable Hydrogen Safe Engineered by the leading consumables developers

Rev. 02 S D2 COVERED ARC WELDING ELECTRODE FOR CHROMIUM-MOLYBDENUM AND LOW ALLOY STEELS HYUNDAI WELDING CO., LTD.

WELDING OF EUROPE INTRODUCTION TO FLUX CORED WIRE KOBELCO WELDING OF EUROPE

NS Plus -115 AWS ER70S-6

NS Plus -102 AWS ER80S-D2, ER90S-D2

HOBART BROTHERS Metal core Process. Basics of Welding Metal Cored Wires

STAINLESS STEEL MIG & TIG WIRES.

HYUNDAI WELDING CO., LTD.

Rev. 02 SF-71LF. FLUX CORED ARC WELDING CONSUMABLE FOR WELDING OF MILD & 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD.

Submerged Arc Consumables Catalog.

SECTION IX. Subject Interpretation File No. QW-182, Fracture Tests... IX QW-200.4(b)... IX QW

Rev. 00. Supercored 70NS. METAL CORED ARC WELDING CONSUMABLE FOR WELDING OF MILD & 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD.

WELCOME TO NATIONAL STANDARD

Flux-cored Wire Electrode for Ar+CO 2 Gas Shielded Arc Welding. "DWA-81Ni1" Productivity through filler metal selection

Solid Wire For Gas Metal Arc Welding For MAG Welding

Shielding gas Condition Yield strength Tensile strength Elongation Impact ISO-V(J) (N/mm 2 ) (N/mm 2 ) (%) -20 C Typical values M21 AW

In these instances, the products are identical in formulation and manufacturing. Ultimately, Hobart will replace all Tri-Mark options.

Submerged Arc Welding Consumables For Mild Steel and 490N/mm 2 Class High Tensile Strength Steel

American Welding Society Nashville Section. Welding Procedure Development

The Comparison of Microstructure and Mechanical Properties of Flux-Cored Wires (FCW)

Steel. Relia Quality Wear Resistant Plates PROPERTIES

I am the Number One Seamless Cored Wire

Solid Wire For Gas Metal Arc Welding For MAG Welding

Approved 07/26/2017 NR Key Features. Conformances. Typical Applications. Welding Positions

Rev. 01 S-6027.LF COVERED ARC WELDING ELECTRODE FOR HIGH EFFICIENT FILLET WELDING HYUNDAI WELDING CO., LTD.

Rev. 00. SC-91K2 Cored FLUX CORED ARC WELDING CONSUMABLE FOR WELDING OF LOW-TEMPERATURE SERVICE STEEL HYUNDAI WELDING CO., LTD.

FLUX CORED ARC WELDING CONSUMABLE FOR WELDING OF

Chapter 12. Flux Cored Arc Welding Equipment, Setup, and Operation Delmar, Cengage Learning

ULTRACORE TOUGH FLUX-CORED WIRE FOR DEMANDING OFFSHORE WORK

Rev. 05. Supershield 71-T8. SELF-SHIELDED FLUX CORED ARC WELDING CONSUMABLE FOR MILD & 490MPa CLASS HIGH TENSILE STEEL HYUNDAI WELDING CO., LTD.

Flux Cored Wires. High quality and high efficiency welding in every field KOBELCO WELDING OF AMERICA, INC..

Submerged Arc Welding: A discussion of the welding process and how welding parameters affect the chemistry ofcorrosion Resistant Overlays (CRO)

Submerged Arc Welding Fluxes and Wires

AWS A5.1 E6013 CSA W48-01 E4313 JIS Z3211 D4313 BS EN ISO 2560-B-E43 13A

LOW HEXAVALENT CHROMIUM EMISSION CONSUMABLES CLEAROSTA RANGE

WELDERS FAVOURTE SINCE1983. Elga-MEGAFIL. Seamless Cored Wire

Relia. Industeel. Relia : Quality Wear Resistant Plates PROPERTIES STANDARDS TECHNICAL CHARACTERISTICS

Solid and Flux Cored Welding Wires

Rev. 02 SMT-625. AWS A5.14/ ASME SFA5.14 ERNiCrMo-3 JIS Z3334 YNiCrMo-3 EN ISO Ni 6625 (NiCr22Mo9Nb) HYUNDAI WELDING CO., LTD.

ACHIEVING TOUGHNESS IN P91 WELDS FROM ROOT TO CAP USING SEMIAUTOMATIC HIGH DEPOSITION METAL TRANSFER (HDMT) GTAW WELDING PROCESS

Rev. 04 SC-EG3 ELECTRO GAS WELDING CONSUMABLE FOR LOW TEMPERATURE SERVICE HYUNDAI WELDING CO., LTD.

pdfmachine trial version

family of stainless steels can be divided into five (5) categories:

Stainless Steel and Nickel- Base Cored Wires to Join Stainless Steel

AN OVERVIEW ON SHIELDED METAL ARC WELDING (SMAW) OF STAINLESS STEEL (SS)

Rev. 01. SW-307 Cored. FLUX CORED ARC WELDING CONSUMABLE FOR WELDING OF 13% Mn STEELS, CLADDING CARBON STEELS HYUNDAI WELDING CO., LTD.

Solid Wires MIG, TIG, SUBMERGED ARC WELDING

Austarc 12P. Austarc 13S GENERAL PURPOSE ELECTRODES - MILD STEEL GENERAL PURPOSE ELECTRODES - MILD STEEL 76 CONTENTS CLASSIFICATION: DESCRIPTION:

DIVISION: METALS SECTION: STRUCTURAL STEEL FRAMING REPORT HOLDER: CAST CONNEX CORPORATION

NUCu STEEL ASTM A-710 GRADE B. High Performance Copper-Precipitation-Strengthened Steel With Low Carbon Equivalent

WELDING WIRES FOR MAG(CO 2 ) WELDING

productivity case studies

201 STAINLESS STEEL. Appliances. Architectural Applications. Automotive Trim. Cooking Utensils

Variants of MIG/MAG Flux Cored Arc Welding (FCAW)

Austenitic (300 Series) Stainless Steel Filler Metals. Stainless Steel Stick Electrodes, Tubular Wires and Solid Wires

UR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments.

NST(Norsk Sveiseteknikk AS) was established in 1991, enabling us to offer you over 20 years of experience in the welding industry.

Table of Contents - Welding Wire

FULL LINE CATALOG. Select-Arc Premium Welding Products. The Standard of Excellence in Tubular Welding Electrodes SELECT ARC INC.

WELDING PROCEDURE SPECIFICATION. Shielded Metal Arc Welding-SMAW

Advantages and Disadvantages of Metal Cored Wires

FULL LINE CATALOG Select-Arc Premium Welding Products The Standard of Excellence in Tubular Welding Electrodes SELECT ARC INC.

WELDING PROCEDURE SPECIFICATION NO

QW-482 WELDING PROCEDURE SPECIFICATION (WPS)

CLEARINOX. Low Hexavalent Chromium Emission MMA and FCW range.

Surface Tension Transfer (STT )

High strength fine grained structural steel. Quenched and tempered. Product description. 890 a product brand of Dillinger 1/6

High strength fine grained structural steel. Quenched and tempered. Product description. 965 a product brand of Dillinger 1/6

Part catalogue. 1. Welding consumables for welding of structural and constructional steels

Welding of Large Diameter Pipelines: Design, Processes, Procedures Specifications for Welding Steel Water Pipe

WELDING PROCEDURE SPECIFICATION NO

Transcription:

Flux Cored Wires Dual Shield BETTER. FASTER. EASIER

Dual Shield ESAB s family of flux cored wires, the Dual Shield X Series, represents the culmation of 50 years of dustry-leadg novation from ESAB. These 21st century wires offer advancements that make this new series much more forgivg than traditional flux cored wires, especially for less experienced welders. + More forgivg than traditional flux cored wires + Higher top-end current levels for out-of-position weldg + Broader operatg ranges + Higher deposition rates out-ofposition applications + Low spatter levels + Exceptional slag removal Dual Shield X wires offer higher topend current levels for out-of-position weldg, offer broader operatg ranges and can yield higher deposition rates out-of-position applications. The X-Series also retas many of the properties that make Dual Shield the flux cored brand of choice: low spatter levels, exceptional slag removal and excellent bead profiles. + Excellent bead profiles Dual Shield X... Makg less experienced welders better. And makg better welders great. 1

Dual Shield 700X TYPICAL MECHANICAL PROPERTIES Shieldg Gas CO 2 Yield Strength 79 ksi, 545 MPa Tensile Strength 87 ksi, 600 MPa Elongation (In 2, 51 mm) 29% CHARPY V-NOTCH PROPERTIES Dual Shield 700X is a high deposition, deep penetration wire for jog of heavy structural steel components. Designed for flat and horizontal position weldg usg CO2 shieldg gas, this X Series wire provides high deposition rates, high efficiency and excellent performance. The bead contour, smooth ripple and slag chemistry allow easy slag removal even narrow groves. Shieldg Gas CO 2 Testg Temperature 0 F (-18 C) 49 ft-lb, 66 J -20 0 F (-28.9 0 C) 33 ft-lb, 45 J Classifications and Approvals + AWS A5.20: E70T-1CH8/T-9CH8 + ASME SFA 5.20 + CERTIFIED BY C.W.B.- CSA W48 + A.B.S.- 2SA,2YSA + DNV III YMS + L.R. - 3S,3YS Industries + Earth Movg Equent + Heavy Equent + Large Steel Components WELD METAL ANALYSIS Shieldg Gas CO 2 C 0.035% Mn 1.50% Si 0.55% P 0.011% S 0.015% Weldg Process + FCAW Recommended Shield Gas + CO 2 2

Dual Shield 700X Diameter (mm) Wire Feed Speed (cm/m) DEPOSITION TABLE Shieldg Gas TTW Dist. (mm) Deposition Rate lb/hr (kg/hr) Efficiency (%) 1/16 (1.6) 149 23 100 (254) CO 2 3/4 (19) 2.8 (1.3) 80 168 24 120 (305) CO 2 3/4 (19) 3.5 (1.6) 80 187 24 140 (356) CO 2 3/4 (19) 4.2 (1.9) 80 205 25 160 (406) CO 2 3/4 (19) 4.9 (2.2) 80 223 25 180 (457) CO 2 3/4 (19) 5.6 (2.5) 80 240 25 200 (508) CO 2 3/4 (19) 6.3 (2.9) 80 257 26 220 (559) CO 2 3/4 (19) 7.0 (3.2) 81 273 26 240 (610) CO 2 3/4 (19) 7.7 (3.5) 81 289 26 260 (660) CO 2 3/4 (19) 8.4 (3.8) 81 3/32 (2.4) 290 27 150 (381) CO 2 1 (25.4) 12.7 (5.8) 86.9 350 28 200 (508) CO 2 1 (25.4) 16.9 (7.7) 86.3 410 29 250 (635) CO 2 1 (25.4) 21.1 (9.6) 86.0 475 32 300 (762) CO 2 1 (25.4) 25.0 (11.3) 84.8 3/32 135-500 25-34 180-460 3/4-1 100-325 26-34 290-610 1-1 1/2 3

Dual Shield 710X Recommended Shield Gas + CO 2 TYPICAL MECHANICAL PROPERTIES As Welded Shieldg Gas CO 2 Yield Strength 75 ksi, 520 MPa Tensile Strength 87 ksi, 625 MPa Elongation 28% As Welded Shieldg Gas 75% Ar / 25% CO 2 Yield Strength 83 ksi, 570 MPa Tensile Strength 93 ksi, 640 MPa Elongation 27% Dual Shield 710X is an all-position flux cored wire for general purpose weldg. It provides outstandg operator appeal with an easily controlled arc, improved operation at both lower and higher current levels, mimal spatter and easily removed slag. Dual Shield 710X can be used with either 100% CO2 or a 75/25 Argon CO2 gas mix, however pure CO2 is recommended applications where weld jot restrat is high. Classifications and Approvals + Seismic Certified D + AWS A5.20: E71T-1C-DH8/T-1M/T-9C-DH8/T-9M + AWS A5.20: E71T-1M/T-9M H8 + ASME SFA 5.20 + CERTIFIED BY C.W.B.- CSA W48 + ABS - 3SA, 3YSA + DNV III YMS + L.R. - 3S,3YS Industries + Civil Construction + Light Equent + Barges + General Fabrication + Shipbuildg + Rail Road Car Weldg Process + FCAW CHARPY V-NOTCH PROPERTIES Shieldg Gas CO 2 Testg Temperature 0 F (-18 C) 57 ft-lb, 77 J -20 F (-29 C) 49 ft-lb, 66 J Shieldg Gas 75% Ar / 25% CO 2 Testg Temperature 0 F (-18 F) 75 ft-lb, 102 J -20 F (-29 C) 50 ft-lb, 68 J WELD METAL ANALYSIS Shieldg Gas CO 2 C 0.03% Mn 1.4% Si 0.5% P 0.007% S 0.009% Ni 0.4% Shieldg Gas 75% Ar / 25% CO 2 C 0.03% Mn 1.5% Si 0.6% P 0.005% S 0.009% Ni 0.4% 4

Dual Shield 710X Diameter (mm) DEPOSITION TABLE Wire Feed Speed (cm/m) Shieldg Gas Deposition Rate lb/hr (kg/hr) Efficiency (%).045 (1.2) 140 23 190 (483) CO 2 3.3 (1.5) 81 154 23 220 (559) CO 2 3.9 (1.77) 81 167 24 250 (635) CO 2 4.5 (2.04) 82 180 24 280 (711) CO 2 5.1 (2.31) 82 193 25 310 (787) CO 2 5.6 (2.54) 82 205 26 340 (864) CO 2 6.2 (2.81) 83 217 26 370 (940) CO 2 6.8 (3.08) 83.052 (1.4) 153 24 160 (406) CO 2 4.0 (1.81) 81 159 24 170 (432) CO 2 4.0 (1.81) 81 166 25 180 (457) CO 2 4.5 (2.04) 81 172 25 190 (483) CO 2 4.8 (2.17) 81 178 25 200 (508) CO 2 5.0 (2.27) 81 184 25 210 (533) CO 2 5.3 (2.4) 81 190 26 220 (559) CO 2 5.5 (2.5) 81 196 26 230 (584) CO 2 5.8 (2.63) 82 201 26 240 (610) CO 2 6.0 (2.72) 82 207 26 250 (635) CO 2 6.3 (2.86) 82 1/16 (1.6) 187 24 140 (356) CO 2 4.2 (1.9) 80 205 25 160 (406) CO 2 4.9 (2.22) 80 223 25 180 (457) CO 2 5.6 (2.54) 80 240 25 200 (508) CO 2 6.3 (2.86) 80 257 26 220 (559) CO 2 7.0 lbs/hr 81 273 26 240 (610) CO 2 7.7 lbs/hr 81 289 26 260 CO 2 8.4 lbs/hr 81 VERTICAL UP WELDING PARAMETERS.052 184 21.7 128 160 21.0 124 144 21.9 168 208 22.3 140 169 21.6 137 159 22.5 181 232 23.0 153 178 22.1 149 174 23.1 195 256 23.6 165 187 22.7 162 189 23.7 209 280 24.3 178 196 23.2 174 204 24.3 222 304 24.9 190 205 23.8 187 220 25.0 236 328 25.6 203 214 24.3 200 235 25.6 249 352 26.2 215 223 24.9 212 250 26.2 263 376 26.9 228 232 25.4 225 400 27.5 240 241 26.0 237 250 26.5 250 5

Dual Shield 710X.052 170-290 23-26 135-205 3/8-1/2 130-280 23-26 125-235 1/2-5/8 290-350 25-27 175-230 1/2-3/4 280-400 25-29 215-290 5/8-3/4 350-550 26-30 180-265 3/4-1 400-600 29-31 250-350 3/4-1 135-265 25-28 165-270 5/8-3/4 265-400 27-30 245-345 3/4-1 400-500 28-32 290-415 1-1 1/4 6

Dual Shield 710X-M Recommended Shield Gas + 75% Ar 25% CO 2 TYPICAL MECHANICAL PROPERTIES Shieldg Gas 75 Ar / 25 CO 2 Yield Strength 74 ksi, 510 MPa Tensile Strength 83 ksi, 570 MPa Elongation (In 2, 51 mm) 29% As Welded Shieldg Gas CO 2 Yield Strength 68 ksi, 470 MPa Tensile Strength 77 ksi, 530 MPa Elongation (In 2, 51 mm) 30% Dual Shield 710X-M provides outstandg operator appeal with an easily controlled arc, improved operation at both lower and higher current levels, mimal spatter and easily removed slag. Dual Shield 710X-M is designed to be used with 75/25 Argon CO 2 gas mix, however pure CO2 may also be used. Classifications and Approvals + Seismic Certified D + AWS A5.20: E71T-1MD/T-9MD H8 + AWS A5.20: E71T-1C/T-9C H8 + ASME SFA 5.20 + CERTIFIED BY C.W.B.- CSA W48 + ABS-35A, 3YSA + MIL-E-24403A MIL-71T-1M + DNV-111 YMS + LR-3Y40S (H10) + GL Industries + Barges + General Fabrication + Light Equent + Rail Road Car + Civil Construction + Shipbuildg Weldg Process + FCAW CHARPY V-NOTCH PROPERTIES Shieldg Gas 75 Ar / 25 CO 2 Testg Temperature 0 F (-18 C) 72 ft-lb, 97 J -20 F (-29 C) 56 ft-lb, 76 J Shieldg Gas CO 2 Testg Temperature 0 F (-18 F) 60 ft-lb, 81 J -20 F (-29 C) 33 ft-lb, 45 J WELD METAL ANALYSIS Shieldg Gas 75 Ar / 25 CO 2 C 0.04% Mn 1.3% Si 0.5% P 0.012% S 0.008% Shieldg Gas CO 2 C 0.04% Mn 1.0% Si 0.3% P 0.012% S 0.008% 7

Dual Shield 710X-M Diameter (mm) DEPOSITION TABLE Wire Feed Speed (cm/m) Shieldg Gas TTW Dist. (mm) Deposition Rate lb/hr (kg/hr).045 (1.2) 240 26.5 450 (1143) 75/25 0.625 (16) 11.5 (5.2).052 (1.40 125 20.0 125 (317.5) 75/25 0.75 (19) 3.0 (1.4) VERTICAL UP WELDING PARAMETERS.052 150 19.0 110 125 20.0 125 144 21.9 194 180 19.8 123 165 20.6 157 159 22.5 215 210 20.5 136 200 21.3 187 174 23.1 230 240 21.3 149 225 22.0 197 189 23.7 240 270 22.0 162 250 22.6 200 204 24.3 257 300 22.8 175 275 23.3 220 220 25.0 260 330 23.5 188 300 23.9 241 235 25.6 270 360 24.3 201 325 24.6 249 250 26.2 293 390 25.0 214 350 25.2 256 420 25.8 227 375 25.7 263 450 26.5 240 400 26.3 286.052 140-240 22-26 130-200 3/8-1/2 125-270 24-28 135-250 1/2-5/8 240-305 24-27 165-225 1/2-3/4 270-370 27-30 225-295 5/8-3/4 305-470 27-29 185-265 3/4-1 370-540 28-32 245-355 3/4-1 140-240 24-28 185-285 5/8-3/4 240-320 27-30 250-340 3/4-1 320-460 28-32 285-400 1-1 1/4 8

Dual ShieldII 711X Industries + Rail Road Car + Civil Construction + General Fabrication + Shipbuildg Weldg Process + FCAW (Flux Core) Recommended Shield Gas + CO 2 TYPICAL MECHANICAL PROPERTIES Dual Shield II 711X is an all-position flux cored wire that displays exceptional impact properties combation with CO2 shieldg gas. This flux cored wire was developed to jo low and medium carbon steels where higher impacts and toughness are required. As with all X Series wires, Dual Shield II 711X offers higher top-end current levels for out-of-position weldg, broader operatg ranges and higher deposition rates out-of-position applications. Applications clude construction, shipbuildg, rail car, light and heavy equent, and general fabrication where exceptional impacts are required. Weld metal analysis is similar to Atom Arc 7018 and Atom Arc 7018-1. Classifications and Approvals + AWS A5.20: E71T-1CJH8/T-9CJH8/TT-9CJH8/T-9M H8/T-12CJH8 + AWS A5.20: E71T-CJH8/T-9CJH8/T-12CJH8 + ASME SFA 5.20 + CERTIFIED BY C.W.B.- CSA W48 + ABS-35A, 3YSA + DNV IIIY40MS (H10) + D.N.V.- III YMS(H10) + L.R. - 3S,3YS Shieldg Gas CO 2 Yield Strength 78 ksi, 540 MPa Tensile Strength 86 ksi, 595 MPa Elongation (In 2, 51 mm) 29% CHARPY V-NOTCH PROPERTIES Shieldg Gas CO 2 Testg Temperature 0 F (-18 C) 96 ft-lb, 130 J -20 F (-29 C) 79 ft-lb, 107 J -40 F (-40 C) 36 ft-lb, 49 J WELD METAL ANALYSIS Shieldg Gas CO 2 C 0.04% Mn 1.4% Si 0.4% P 0.012% S 0.010% Ni 0.4% 9

Dual ShieldII 711X Diameter (mm) DEPOSITION TABLE Wire Feed Speed (cm/m) Shieldg Gas Deposition Rate lb/hr (kg/hr).045 (1.2) 122 20.2 178 (452) CO 2 7.4 (3.36) 134 20.9 205 (521) CO 2 146 21.6 233 (592) CO 2 158 22.3 260 (660) CO 2 170 23.0 288 (732) CO 2 182 23.7 315 (800) CO 2 194 24.4 343 (871) CO 2 206 25.1 370 (940) CO 2 218 25.8 398 (1011) CO 2 230 26.5 425 (1080) CO 2.052 (1.4) 150 20.5 160 (406) CO 2 8.7 (3.95) 160 21.1 181 (460) CO 2 170 21.6 201 (511) CO 2 180 22.2 222 (564) CO 2 190 22.7 242 (615) CO 2 200 23.3 263 (668) CO 2 210 23.8 283 (719) CO 2 220 24.4 304 (772) CO 2 230 24.9 324 (823) CO 2 240 25.5 345 (876) CO 2 250 26.0 365 (927) CO 2 1/16 (1.6) 156 22.4 136 (345) CO 2 8.8 (3.99) 167 22.9 149 (378) CO 2 178 23.3 162 (411) CO 2 189 23.8 175 (445) CO 2 199 24.2 188 (478) CO 2 210 24.7 201 (511) CO 2 221 25.1 214 (544) CO 2 231 25.6 227 (577) CO 2 242 26.0 240 (610) CO 2 10

Dual ShieldII 711X VERTICAL UP WELDING PARAMETERS.052 178 20.2 122 160 20.5 150 136 22.4 156 205 20.9 134 181 21.1 160 149 22.9 167 233 21.6 146 201 21.6 170 162 23.3 178 260 22.3 158 222 22.2 180 175 23.8 189 288 23.0 170 242 22.7 190 188 24.2 199 315 23.7 182 263 23.3 200 201 24.7 210 343 24.4 194 283 23.8 210 214 25.1 221 370 25.1 206 304 24.4 220 227 25.6 231 398 25.8 218 324 24.9 230 240 26.0 242 425 26.5 230 345 25.5 240 365 26.0 250.052 170-290 23-26 135-205 3/8-1/2 130-280 23-26 125-235 1/2-5/8 290-350 25-27 175-230 1/2-3/4 280-400 25-29 215-290 5/8-3/4 350-550 26-30 180-265 3/4-1 400-600 29-31 250-350 3/4-1 135-265 25-28 165-270 5/8-3/4 265-400 27-30 245-345 3/4-1 400-500 28-32 290-415 1-1 1/4 11

Dual ShieldII 712X Weldg Process + FCAW (Flux Core) Recommended Shield Gas + 75% Ar 25% CO 2 TYPICAL MECHANICAL PROPERTIES Shieldg Gas 75/25 Yield Strength 78 ksi, 540 MPa Tensile Strength 83 ksi, 570 MPa Elongation (In 2, 51 mm) 28% Dual Shield II 712X is an all-position flux cored wire tended for applications requirg outstandg weld metal toughness. This X Series wire, combation with 75% Argon/25% CO2 shieldg gas, can produce Charpy V-notch impact results of more than 50 ft-lb (68 J) at -60 F (-51 C) and Crack Tip Openg Displacement (CTOD) results of more than 20 mils (0.5 mm) at -40 F (-40 C). Dual Shield II 712X also provides the smooth arc and low spatter levels characteristic of Dual Shield flux cored wires. Applications clude off-shore oil components, shipbuildg and heavy equent where exceptional Charpy impact/low temperature toughness is required. CHARPY V-NOTCH PROPERTIES Shieldg Gas 75/25 Testg Temperature 0 F (-18 C) 129 ft-lb, 175 J -40 F (-40 C) 93 ft-lb, 125 J Classifications and Approvals + AWS A5.20: E71T-1MJH8/T-9MJH8/T-12MJH8 + ASME SFA 5.20 + CERTIFIED BY C.W.B.- CSA W48 + A.B.S. - 3SA, 4YSA + D.N.V. - IV YS + L.R. - 4YS,40S Industries + Heavy Equent + Shipbuildg + Offshore Oil WELD METAL ANALYSIS Shieldg Gas 75/25 C 0.05% Mn 1.1% Si 0.3% P 0.009% S 0.010 % 12

Dual ShieldII 712X Diameter (mm) DEPOSITION TABLE Wire Feed Speed (cm/m) Shieldg Gas Deposition Rate lb/hr (kg/hr).045 (1.2) 129 19.5 160 (406) 75/25 9.3 (4.21) 141 20.2 190 (483) 75/25 153 20.9 219 (556) 75/25 165 21.6 249 (632) 75/25 177 22.3 278 (706) 75/25 189 23.0 308 (782) 75/25 200 23.7 337 (856) 75/25 212 24.4 367 (932) 75/25 224 25.1 396 (1006) 75/25 236 25.8 426 (1082) 75/25 248 26.5 455 (1156) 75/25.052 (1.4) 135 20.0 130 (330) 75/25 9.4 (4.26) 148 20.6 153 (389) 75/25 160 21.1 176 (447) 75/25 173 21.7 199 (505) 75/25 185 22.2 222 (564) 75/25 198 22.8 245 (622) 75/25 210 23.3 268 (681) 75/25 223 23.9 291 (739) 75/25 235 24.4 314 (798) 75/25 248 25.0 337 (856) 75/25 260 25.5 360 (914) 75/25 1/16 (1.6) 195 23.8 145 (368) 75/25 9.6 (4.35) 213 24.0 160 (406) 75/25 231 24.3 175 (445) 75/25 249 24.5 190 (383) 75/25 267 24.8 205 (521) 75/25 285 25.0 220 (559) 75/25 303 25.3 235 (597) 75/25 321 25.5 250 (635) 75/25 13

Dual ShieldII 712X VERTICAL UP WELDING PARAMETERS.052 160 19.5 129 130 20.0 135 145 23.8 195 190 20.2 141 153 20.6 148 160 24.0 213 219 20.9 153 176 21.1 160 175 24.3 231 249 21.6 165 199 21.7 173 190 24.5 249 278 22.3 177 222 22.2 185 205 24.8 267 308 23.0 189 245 22.8 198 220 25.0 285 337 23.7 200 268 23.3 210 235 25.3 303 367 24.4 212 291 23.9 223 250 25.5 321 396 25.1 224 314 24.4 235 426 25.8 236 337 25.0 248 455 26.5 248 360 25.5 260 2.052 140-240 22-26 130-200 3/8-1/2 125-270 24-28 135-250 1/2-5/8 240-305 24-27 165-225 1/2-3/4 270-370 27-30 225-295 5/8-3/4 305-470 27-29 185-265 3/4-1 370-540 28-32 245-355 3/4-1 140-240 24-28 185-285 5/8-3/4 240-320 27-30 250-340 3/4-1 320-460 28-32 285-400 1-1 1/4 14

Dual Shield 810X-Ni1 TYPICAL MECHANICAL PROPERTIES Shieldg Gas CO 2 Yield Strength 86 ksi, 590 MPa Tensile Strength 92 ksi, 635 MPa Elongation (In 2, 51 mm) 29% Dual Shield 810X-Ni1 provides outstandg operator appeal with an easily controlled arc, improved operation at both lower and higher current levels, mimal spatter and easily removed slag. Dual Shield 810X-Ni1 is designed for use with 100% CO2. It is an excellent choice for weldg on COR-TEN steel applications where weatherg grade wires are not desirable. CHARPY V-NOTCH PROPERTIES Shieldg Gas CO 2 Testg Temperature -20 F (-29 C) -40 F (-40 C) 60 ft-lb, 81 J 45 ft-lb, 61 J Classifications and Approvals + Seismic Certified D + AWS A5.29: E81T1-Ni1CD H8 + Certified by C.W.B. - CSA W48 Industries + Rail Road Car + Barges + Power Generation + General Fabrication + Light Equent + Heavy Equent + Civil Construction + Bridge Construction + Shipbuildg Weldg Process + FCAW (Flux Core) WELD METAL ANALYSIS Shieldg Gas CO 2 C 0.04% Mn 1.3% Si 0.6% P 0.010% S 0.009% Ni 1.0% Recommended Shield Gas + CO 2 15

Dual Shield 810X-Ni1 VERTICAL UP WELDING PARAMETERS.052 184 21.7 128 160 21.0 124 144 21.9 168 208 22.3 140 169 21.6 137 159 22.5 181 232 23.0 153 178 22.1 149 174 23.1 195 256 23.6 165 187 22.7 162 189 23.7 209 280 24.3 178 196 23.2 174 204 24.3 222 304 24.9 190 205 23.8 187 220 25.0 236 328 25.6 203 214 24.3 200 235 25.6 249 352 26.2 215 223 24.9 212 250 26.2 263 376 26.9 228 232 25.4 225 400 27.5 240 241 26.0 237 250 26.5 250 2.052 170-290 23-26 135-205 3/8-1/2 130-280 23-26 125-235 1/2-5/8 290-350 25-27 175-230 1/2-3/4 280-400 25-29 215-290 5/8-3/4 350-550 26-30 180-265 3/4-1 400-600 29-31 250-350 3/4-1 135-265 25-28 165-270 5/8-3/4 265-400 27-30 245-345 3/4-1 400-500 28-32 290-415 1-1 1/4 16

ESAB Filler Metals Proudly Made the USA Utilizg years of experience and some of the dustry s most advanced technologies, ESAB has proudly supported the growth and development of the weldg dustry throughout the world. Our facilities Central Pennsylvania have been producg many of the weldg fi ller metals brands you have come to know and trust sce 1940. With a dedicated staff of world-class research engeers and scientist, ESAB proudly contues its tradition of pioneerg new processes and developg new products. Contuous teration with customers has ledd us to develop solutions for an array of weldg applications nearly every dustial sector. Once production, every item that leaves our 400,000 sq. ft. manufacturg facility is assured to meet the quality you deserve -- guaranteed! Whatever your fi ller metal requirements, ESAB has the product you need and the quality you can trust. NOTICE: Test results described above were obtaed under controlled laboratory conditions, and are not guarantees for use the fi eld. Actual use of the product may produce varyg results due to conditions and weldg techniques over which ESAB has no control, cludg but not limited to plate chemistry, weldment design, fabrication methods, wire size, weldg procedure, service requirements and the environment. The User should confi rm by qualifi cation testg, or other appropriate means, the suitability of any weldg consumable and procedure before use the tended application. CAUTION: Users should be thoroughly familiar with the safety precautions referenced the product label for the relevant product and the Safety Data Sheet for the product. Safety Data Sheets are available at www,esabna.com or by callg 1-800-ESAB-123. STRENGTH THROUGH COOPERATION ESAB Weldg & Cuttg Products / esabna.com / 1.800.ESAB.123 USA: P.O. Box 100545, 411 South Ebenezer Road, Florence, SC 29501-0545 Canada: 6010 Tomken Road, Mississauga, Ontario L5T-1X9 Mexico: Ave. Diego Díaz de Berlanga, No. 130, Col. Nogalar San Nicolás de los Garza N.L. CP 66480 Monterrey, Mexico FIND US facebook.com/esabna twitter.com/esabna youtube.com/esabweb The ESAB group is certified accordg to ISO 14001 & OHSAS 18001 COR-1055-B 10/2011

2024 © businessdocbox.com Privacy Policy | Terms of Service | Feedback