1. DESCRIPTION VIP`s QuickDeck Car Park Decking system combines the speed, flexibility and strength of VIP`s proven high performance elastomeric linings with the safety of R10 and R12 skid resistance surfaces. This one application system provides a superior, longer lasting skid resistant surface not achievbable using existing broadcasting methods. Direct incorporation of specially selected aggregates using an innovative application method ensures a consistent and durable finish is produced every time. The spray applied, one process, one application method results in significant time savings over traditional car park decking systems. VIP`s QuickDeck Car Park Decking system provides exceptional tensile strength, elongation and crack bridging characteristics making it an ideal waterproofing membrane. Combined with VIP`s unique aggregate injection system customer`s can now waterproof their decks and provide a long lasting superior skid resistant surface all within a fraction of the time of traditional systems. 2. FEATURES High anti-skid and anti-slip properties - Fulfills R10 and R12 skid resistance rating according to DIN 51130 One application process, rapid cure massive time savings. 1 day applications possible Low consumption of aggregates approx. 400 grams per m² No excess aggregate is produced saving clean up and aggregate recovery time. Very good adhesion to concrete Superior crack bridging abilities, even at low temperatures (6.3mm at -20c) High flexibility, high tensile strength, very high abrasion resistance Two aggregate grades - aggressive for ramps and high slip areas and standard for flat and walk way areas Colour fast options available High resistance to oils, fuels, de-icing salts and a wide range of general chemicals Solvent and VOC free- Environmental friendly Ready for food traffic in 30 minutes - Vehicular traffic in 6 hrs. Page 1 of 5
SYSTEM, BUILD UP 1. Concrete substrate: Concrete structure with mechanical pretreatment (abrasive or shot blasting) 2. Green Primer Layer: Primer and concrete sealer QuickPrime 2K-SF 3. Grey layer: Elastomeric high build, instant curing flexible membrane QuickSpray Industrial at 2mm DFT 4. Brown layer: Special aggregate layer QuickSpray Industrial with special non-silica aggregates at 1mm DFT. 5. Blue Layer: Optional aliphatic coloured top coat QuickFloor 500 (optional) at 250 400 microns wet film thickness. all within a fraction of the time of traditional systems. 3. RECOMMENDED USES Car Park ramps high slip risk areas. Aggressive aggregate option to reduce slippage risk on entrance, exit and turning ramps. High water, snow and ice areas. Car Park Deck Areas with waterproofing requirements, crack bridging requirements and skid resistance requirements. Fully exposed areas to UV and weather. Loading Docks and Service ramps with slip resistance requirements, waterproofing requirements, crack bridghing requirements, full UV and weather exposure. Heavy traffic areas subject to high shear and abrasion loadings. forklifts, trucks etc. Page 2 of 5
4. AGGREGATE INJECTION - DATA Aggregate tank - Model Max. Working pressure Volume Weight VARIO 60 ltr. NDG 12 bar max. 60 l aggregates material max. 80 kg aggregates material Consumption of aggregates approx. 0.4-0.5 kg/m 2 m² coverage per loaded Aggregate tank approx. 140-160 m 2 Aggregate options 1 Standard, 2 Aggressive. 1. Garnet aggregate 0.2 0.6 mm 2. Silicon carbide 0.4 0.6 mm 5. SYSTEM NAME AND ANTI-SKID / ANTI-SLIP CLASSIFICATIONS NAME OF THE COATING SYSTEM SYSTEM DESIGN Name of the coating system System design Anti-skid /Anti slip classification under DIN 51130:2014 QuickDeck Industrial STD - (Garnet Aggregate 0.2 0.6mm) (Developmental name - EP PD-STD) QuickDeck Industrial AGG (Silicon Carbide 0.4 0.6mm) (Developmental name - EP PD-AG) R10 / V4 R12 / V8 Page 3 of 5
6. ANTI-SKID / ANTI-SLIP CLASSIFICATIONS PARKING AREAS The VIP QuickDeck Car Park Decking System as detailed within was independently tested in accordance with DIN 51130:2014. Copies of the independent test reports can be supplied upon request. Aluminium Oxide aggregates can also be used as part of the QuickDeck Car Park System but VIP does not recommend the use of Quartz Sand. DIN 51130:2014. Copies of the independent test reports can be supplied upon request. Aluminium Oxide aggregates can also be used as R10 part of the QuickDeck Car Park System but VIP does not recommend the use of Quartz Sand. Garages, parking decks and underground parking without influence of weathering R10/V4 OR R11 Garages, parking deck and underground parking with exposure to weathering, outdoor parking areas, sidewalks, roof top loading ramps / areas. R12 Loading docks, filling stations (petrol station) R12/ V4 Non covered loading ramps 7. HINTS FOR THE APPLICATION: The VIP QuickDeck Car Park Decking System should only be applied by a VIP Approved Applicator. Specialist equipment and knowledge is required to ensure a high quality result is achieved. VIP Approved Applicators have completed VIP`s intensive applicator course and have a detailed knowledge of VIP products and application techniques. VIP Approved Applicators have full technical support of VIP Head Office Technicians. Aromatic Polyurea Coating Systems are UV-stable but are not color stable. The cured coating system may exhibit discoloration when exposed to sunlight. This does not influence the physical properties of the material! For colour fast options and line marking options please consult with your VIP representative. 8. OVERCOATING GUIDE QuickPrime 2K-SF Primer and concrete sealer - Approximate minimum over coat time with QuickSpray Industrial membrane is 3 hours (at 25C). Maximum overcoat period before treatment is required is approximately 48 hours. QuickSpray Industrial high performace flexible membrane over QSP Industrial = no minimum overcoat time. Approximate maximum overcoat time 10 12 hours. QuickFloor 500 over QSP Industrial minimum over coat time approximately 30 minutes. Approximate maximum overcoat time 8 hours. Overcoating times are provided as a guide only and presume surfaces are clean and free from moisture. Page 4 of 5
9. GENERAL The VIP QuickDeck Car Park Decking System incorporates several of VIP`s high performance products. For specific physical performance data on the system products refer to the components Technical Data Sheets. All guidelines, recommendations, statements, and technical data contained herein are based on information and tests we believe to be reliable and correct, but accuracy and completeness of said tests are not guaranteed and are not to be construed as a warranty, either expressed or implied. It is the user`s responsibility to satisfy himself, by his own information and testing, to determine the suitability of the product for his own intended use, application and job situation and user assumes all risk and liability resulting from his use of the product. These products require specialized equipment and skills to apply. It is the purchaser`s responsibility to ensure that they have the necessary equipment, skills and experience to apply these products. Neither seller nor manufacturer shall be liable to the buyer or any third person for any injury, loss or damage directly or indirectly resulting from use of, or inability to use, the product. Technical and application information is provided for the purpose of establishing a general profile of the material and application parameters. Test performance results were obtained in a controlled environment and VIP GmbH makes no claim that these tests or any other tests can be accurately reproduced in all environments. The rights of the purchaser regarding of the quality of our materials follows completely our general terms and conditions. For requirements, which exceed the scope of the above mentioned applications please contact VIP technical staff. VIP reserves the right to change or modify the details and data contained herein at any time. Valid is only the actual current version of this technical data sheet in each case. Copyright, VIP Coatings International GmbH & Co.KG QuickDeck Version: April 2017-CW Page 5 of 5