Performance Products for Cementitious Systems
Products for Cement and Mortar To achieve ground-breaking formulations that have outstanding workability, pot life, physical strength, flexibility and adhesion properties, your system needs state-of-the-art raw materials. BASF offers a wide variety of chemistries to enhance the performance and durability of all your cementitious formulations and often help reduce energy consumption and speed up construction times. Products at a glance Acronal Acrylic Dispersions and Powders Styrofan Styrene Butadiene Dispersions Calsan, Quick-Trigger, and Melflux Specialty Chemistries Joncryl Acrylic Resins Construction materials including concrete, mortars, and protective coatings depend heavily on the quality and properties of locally available raw materials. Furthermore, interactions between organic and inorganic binders, fillers, and chemical additives need to be controlled to ensure the best performance of the system. We can help you with innovative chemistries that enable you to formulate outstanding products. Our broad portfolio includes styrene butadiene and acrylic dispersions, acrylic powders, and resins used in coatings. These products are available under the trade names Acronal, Calsan, Joncryl, Styrofan, and Melflux.
Products for Cementitious Applications Product Repair Self-Levelling Thinset Adhesives Primer/Sealer Concrete Coatings Cementitious Waterproofing Membrane EIFS Topcoat EIFS Basecoat (Cementitious) Grouts, Plasters and Renders Concrete Modification Efflorescence Control for Bricks and Pavers Acronal S 400 Acronal S 702 Acronal S 734 P Acronal S 735 P Acronal NX 2727 Acronal NX 4312 Acronal 4600 Acronal NX 4623 Acronal NX 4771 Acronal NX 4787 Acronal 4923 Acronal 4944 Acronal 5011 Acronal 5028 Acronal P 5033 Calsan 50 Dispex AS 1920 Foamstar PB 2941 Joncryl 1980 Joncryl 1982 Joncryl 1984 Joncryl 1987 Joncryl 1992 Joncryl 2970 Joncryl 2980 Joncryl 8383 Melflux PCE 541 L Quick-Trigger 4333 Rehovis AS 1920 Styrofan ND 614 Styrofan ND 623 Styrofan NX 4104 X
Typical Product Properties In/On Cement Product Acrylic Dispersions Tg (ºC) Typical Properties Solids (%) ph Viscosity (cps) Density (lb/gal) Monomer type In Acronal 5028-55 55 7.5 150 8.7 Acrylic - In Acronal 4944-15 52 8 100 8.4 Styrene-Acrylic - In Acronal 5011-8 57 7.5 375 8.7 Styrene-Acrylic - In Acronal S 400-6 57 8 500 8.6 Styrene-Acrylic - In Acronal NX 4623 12 47 10 65 8.6 Acrylic - In Acronal 4923 12 47 10 65 8.6 Acrylic - Both Acronal 4600 12 47 9 300 8.5 Acrylic - On Acronal NX 4312 12 48 7 300 8.6 Styrene-Acrylic - On Acronal NX 2727 17 50 7.5 3500 8.6 Styrene-Acrylic - Both Acronal NX 4771 19 47 8.5 650 8.7 Acrylic - In Acronal S 702 19 50 7.8 1,500 8.6 Styrene-Acrylic - Acrylic Powders In Acronal S 430 P -15 ca. 99 ca. 8 Powder 31 - Slight yellow In Acronal P 5033-15 > 98 ca. 7 Powder 31 - Brownish In Acronal S 734 P 20 ca. 99 ca. 8 Powder 31 - Slight yellow In Acronal S 735 P 20 ca. 99 ca. 8 Powder 31 - Slight yellow Styrene Dispersions In Styrofan ND 614 6 48 10 38 8.5 Styrene-butadiene - Both Styrofan NX 4104 X 10 53 7.5 200 8.5 Styrene-butadiene - In Styrofan ND 623 14 51 9 70 8.5 Styrene-butadiene - Other Chemistries In Calsan 50-50 11 250 8.4 - - In Dispex AS 1920 - > 90 - - - - - In Foamstar PB 2941 - > 99 7.5-10 - - - - In Melflux PCE 541 L - 44 7.5-9.2 Polycarboxylic ether, modified On Quick-Trigger 4333-32 11 50 8.5 - - In Rehovis AS 1920 - > 90 - - - - - Acrylic Resins On Joncryl 1987 14 42 8.5 100-900 8.6 Acrylic - On Joncryl 8383 14 40 7.5-8.5 10-400 8.6 Acrylic - On Joncryl 2970 15 43 8.2-9.2 250 8.7 Acrylic - On Joncryl 2980 18 45 8.5-9.5 < 300 8.7 Acrylic - On Joncryl 1980 69 40 8.0-9.0 50-250 8.6 Acrylic - On Joncryl 1982 78 41 8.5 250 8.6 Acrylic - On Joncryl 1984 78 41 8.4 250 8.6 Acrylic - On Joncryl 1992 78 43 8.5 50-500 8.6 Acrylic - Color -
Features Cementitious waterproofing membrane binder with high flexibility, low temperature crack-bridging and cement compatibility. Ammonia and APEO free. For use in cementitious waterproofing membranes and EIFS basecoats. Good low temperature crack-bridging and superior workability. Ammonia free. For use in cementitious waterproofing membranes, EIFS basecoats, mortars and flexible tile adhesives. Good strength and flexibility. APEO and ammonia free. All purpose stryene-acrylic for use in cementitious waterproofing membranes and flexible mortars. High elongation and excellent water resistance. All acrylic resin for cementitious formulations providing superior workability, potlife, and compressive strength. Freeze-thaw stability. Ammonia free, all acrylic resin for cementitious formulations providing superior workability, potlife, and compressive strength. Freeze-thaw stability. All acrylic resin for EIFS cementitious basecoats and topcoats. Excellent weatherability with good dirt pickup resistance. APEO free. Styrene-acrylic resin used in concrete coatings, cement stable. APEO and ammonia free. Styrene-acrylic resin for use in primer applications (e.g., EIFS). Is highly water resistant and imparts strong adhesion to construction substrates. All acrylic resin for EIFS basecoats, topcoats, driveway sealers and in clear coat applications. Superior exterior durability, water and dirt pick up resistance. Moisture alkali resistant, cement compatible, styrene-acrylic resin used in mortar modification. Lowers mortar water to cement ratio resulting in high mortar strength. Low Tg styrene-acrylic powder. Promotes adhesion and low temperature flexibility in mortars and waterproofing membranes. Low Tg self-crosslinking styrene-acrylic powder. Promotes superior flexibility and adhesion in 1K waterproofing slurries. APEO and ammonia free. Defoamed, APEO free styrene-acrylic powder polymer. Yields low water to cement ratio and reduced sticking to tools. APEO free. APEO free, styrene-acrylic polymer powder. Promotes less sticking to tools and very low water to cement ratio. High performance with excellent cement/mortar compatibility. Improves flexural and tensile bond strength, and adhesion. Multi functional used in waterproofing, concrete modification and over green concrete. Very low water uptake and moisture vapor transmission. APEO and ammonia free. Low odor dispersion used in high end cementitious applications. Provides high mortar strength, adhesion and alkali resistance. APEO and ammonia free. Calcium stearate dispersion for use in mortar/concrete masonry units. Low free calcium. Provides efflorescence control. APEO and ammonia free. Solid based bead dispersant for products supplied as dry-systems. Activation upon addition of water to create paste/slurry. Powder defoamer for dry mix adhesives, plasters, cements, and underlayments. High performance PCE based superplasticizer for calcium sulphate based compounds. APEO and ammonia free. Quick-Trigger additive for exterior coatings and waterproofing applications. Accelerates set and promotes early rain and quicker foot traffic resistance. Powder based alkali swellable thickener which is activated when the ph is above 7.5 Excellent blush resistance. Offers low VOC while maintaining great UV and chemical resistance. Low VOC adhesion and excellent hot tire pickup resistance. Superior blush and UV resistance while maintaining excellent adhesion. Excellent weathering and chemical resistance. Good dirt, hot tire and blush resistance. Good hardness and chemical resistance. Excellent hot tire pickup resistance. Outstanding chemical and stain resistance. High performing clear and pigmented topcoat. Increased UV resistance. Outstanding chemical and stain resistance. High performing clear and pigmented topcoat. Good adhesion and high hardness.
About the Dispersions & Pigments Division The Dispersions & Pigments Division in North America offers a comprehensive portfolio of resins, binders, latex, pigments and effect pigments, colorants, and systems to meet specific application needs for the coatings, construction, printing and packaging and plastics markets. Our innovative products also help manufacturers in the adhesives, nonwovens and fiber bonding industries meet functional and performance demands. Our formulation additives, rheology modifiers, light stabilizers, photoinitiators, and antioxidants significantly enhances the existing BASF product portfolio for these markets. For more information about BASF s Dispersions & Pigments Division, visit www.basf.us/dpsolutions. BASF - The Chemical Company BASF Corporation, headquartered in Florham Park, New Jersey, is the North American affiliate of BASF SE, Ludwigshafen, Germany. BASF has nearly 17,000 employees in North America, and had sales of $19.3 billion in 2013. For more information about BASF s North American operations, visit www.basf.us. At BASF, we create chemistry and have been doing so for 150 years. Our portfolio ranges from chemicals, plastics, performance products and crop protection products to oil and gas. As the world s leading chemical company, we combine economic success with environmental protection and social responsibility. Through science and innovation, we enable our customers in nearly every industry to meet the current and future needs of society. Our products and solutions contribute to conserving resources, ensuring nutrition and improving quality of life. We have summed up this contribution in our corporate purpose: We create chemistry for a sustainable future. BASF had sales of about 74 billion in 2013 and over 112,000 employees as of the end of the year. Further information on BASF is available on the Internet at www.basf.com. While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, they are provided for guidance only. Because many factors may affect processing or application/use, BASF recommends that the reader make tests to determine the suitability of a product for a particular purpose prior to use. NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESCRIPTIONS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. In no case shall the descriptions, information, data or designs provided be considered a part of BASF s terms and conditions of sale. Further, the descriptions, designs, data and information furnished by BASF hereunder are given gratis and BASF assumes no obligation or liability for the descriptions, designs, data or information given or results obtained, all such being given and accepted at the reader s risk. = registered trademark of BASF Group. 2014 BASF, Southfield, MI 48033. All rights reserved. BF-10313 United States and Canada BASF Corporation 11501 Steele Creek Road Charlotte, NC 28273 Phone: 800-251-0612 Fax: 800-971-1123 24710 West Eleven Mile Road Southfield, MI 48033 Phone: 800-962-7829 Fax: 800-971-1123 Mexico BASF Mexicana, S.A. de C.V. Av. Insurgentes Sur 975 Col. Ciudad de los Deportes 03710 Mexico, D.F. Phone: 52-55-5325-2600 Fax: 52-55-5723-3011 e-mail: contactoed@basf.com Web: www.basf.com.mx email: dpsolutions@basf.com